Beli Prod-Masz Zgr2500/1,2 bekas (2.169)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, APS-10 Automatyczna maszyna do pakowania herbaty w torebki. Dostępne są 2 urządzenia w pełni sprawne. Przy zakupie obu urządzeń otrzymasz 5% rabatu od wyświetlanej ceny. Urządzenie przeznaczone jest do automatycznego pakowania materiałów sypkich, na przykład herbat czarnych, owocowych itd. KONSTRUKCJA URZĄDZENIA Hodpfx Aoyn Ibkjl Isl Główne podzespoły maszyny saszetkującej: - Odwijak na podwójny materiał opakowaniowy - System rolek prowadzących - Koła formujące do zgrzewania - System cięcia - System cięcia poprzecznego - System grupowania (po 10, 20, 30, 50-100 sztuk) - Dozownik objętościowy - Podwójny przenośnik taśmowy MATERIAŁ OPAKOWANIOWY - Termozgrzewalny papier filtracyjny: 16g/m² - Szerokość: 490 mm - Maksymalna średnica rolki: 500 mm - Średnica rdzenia: 76 mm DANE TECHNICZNE I EKSPLOATACYJNE - Wymiary całkowite (S x D x W): 1500 mm x 1600 mm x 2100 mm - Wymiary torebki: 48 x 65 mm - Wydajność: od 500 do 1000 szt./min zależnie od materiału - Liczba torów: 10 - Dozowanie: 1 do 2 g - Obsługa bezpośrednia: jedna osoba - Odbiór saszetek w zależności od prędkości pracy urządzenia: 2-3 osoby - Zasilanie: elektryczne 3 x 380V 50Hz - Pobór mocy: 5 kVA - Pneumatyka: 6 bar - Zużycie powietrza: ok. 0,3 m³/h

Tahun pembuatan: 2022, Kondisi: bekas, Pengaduk krim – MESH MASZ – Model: MK200Z – Kondisi sangat baik Hodpfx Asy Enzmsl Isl Pemanasan dan pengadukan — Pengaduk krim — pemanasan, peleburan, infus, memasak, pengadukan, penguapan. Digunakan dalam produksi krim dan produk lain yang membutuhkan pengadukan serta pemanasan hingga suhu maksimum 150°C. Mesin krim MK – Kapasitas wadah adonan: 200 liter Mesin MK digunakan untuk produksi dan persiapan adonan sus, krim, salep, olahan buah, glasir, saus, isian, massa sesuai resep Anda sendiri, serta untuk semua produk yang membutuhkan pemanasan merata dan pengadukan lembut secara simultan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Mesin pembentuk genteng, produsen BUD-MASZ, tahun produksi 2010, jarak tempuh 3510 km, lebar coil 1250 mm, tanpa decoiler. Hsdpfx Ajxbgl Tol Ijl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 03/2027, panjang total: 1.300 mm, lebar total: 775 mm, tinggi total: 1.360 mm, arus masuk: 16 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, daya: 6 kW (8,16 hp), sekring listrik: 16 A, Spiral Mixer Masz SM 120 Mesin pengaduk adonan dengan teknologi yang sudah matang dan sangat kokoh! Panel kontrol LED digital Mesin adonan dengan 2 timer Penerangan wadah & sakelar manual darurat Hedoxxgmxopfx Al Ijl untuk min/maks. 6 - 120 kg adonan Tutup pelindung debu tepung & indikator suhu Wadah dan spiral dari baja tahan karat Mesin dapat dipindahkan Hanya di tempat kami, telah diuji DGUV V3 Koneksi 400V, colokan CEE 16A Ukuran: 775 x 1300 x 1360/1800mm, P x L x T Mesin bekas Dengan garansi & layanan suku cadang Opsi: Layanan pengiriman Paket servis Kontrak perawatan Kotak suku cadang untuk keamanan ekstra Pelatihan & commissioning Banyak spiral mixer lainnya tersedia di stok kami!

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, daya: 3 kW (4,08 hp), produsen motor: OMEC, tipe perpindahan gigi: lain, berat keseluruhan: 120 kg, tinggi total: 1.200 mm, panjang total: 700 mm, lebar total: 750 mm, lebar kerja: 750 mm, 1 Hodpfxeypb Aqs Al Iol

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.200 kg, Perlengkapan: kendali jauh kaki, Meja beban 1200 kg Meja Putar Pengelasan, Sertifikat CE dengan tambahan biaya, dengan klem pengikat baru bekas ringan Kapasitas beban horizontal 1200 kg Kapasitas beban miring 1200 kg sangat kokoh Hodpsxbhnpofx Al Iol Kecepatan dapat diatur tanpa tingkat mulai dari 0,05 hingga 0,6 rpm (hingga 1,5 rpm atas permintaan) Diameter meja putar 1200 mm Tinggi horizontal 950 mm, miring hingga tengah 720 mm dengan remote kontrol tangan, tampilan digital Panjang 1,35 m x Lebar 1,2 m

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jam operasional: 1 h, daya: 11 kW (14,96 hp), produsen motor: OMEC, jenis bahan bakar: listrik, berat keseluruhan: 650 kg, tinggi total: 1.650 mm, panjang total: 1.600 mm, lebar kerja: 700 mm, nomor mesin/kendaraan: 001, We offer this new Masz-Rol D400 agricultural machine, year of manufacture 2026. Name: Grain Crimper Serial Number: 001 Type: D400 Year of Manufacture: 2026 Power: 2 x 5.5 kW Net weight: 650 kg Power supply: 3×400 V 50 Hz If you have any questions or require further information, please contact us by email, phone, or WhatsApp. Grain Crimper – dual-motor crimper suitable for all types of cereals, maize, peas, etc. Each roller is driven by its own motor via two belts per roller. In addition to crimping, the rollers can gently crush the grain. - The listed machine is equipped with 2x 5.5 kW motors. - This model allows installation of alternative motor configurations: - 2x4 kW - 2x7.5 kW - 2x11 kW - Rollers: diameter 400 mm, length 300 mm - Output capacity: up to 4–8 T/h depending on installed power and roller gap - Magnetic system for capturing ferrous parts - Adjustable quantity (thickness) of processed grain - Overload cutoff switch Hsdpfx Asyky Tkol Iol - V-belt tension adjustment - Scrapers prevent grain from sticking to the rollers when processing moist grain - Roller wall thickness: 20–25 mm - Independent drive for each roller via belt drive (2 x B17, two belts per roller) - Powder coated finish - Base dimensions: 1500 x 800 mm - CE declaration of conformity.

Tahun pembuatan: 2017, Kondisi: bekas, Oven rotary roti profesional, digunakan untuk produksi produk pastry dan roti. Produsen: MECH - MASZ Model: ROTOR 68 Ukuran loyang: 60 x 80 cm Hjdpfx Aljxzry Ne Isl Luas pemanggangan: 8,6 m2 Berat: 1450 kg Catu daya: burner minyak Tahun produksi: 2017.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, new spiral mixer Masz SMR 180, movable, year of manufacture 2023, 120 kg dough capacity, 2 timers, stainless steel spiral, supplied with 1 stainless steel bowl, optionally available with a second bowl for an additional €4,000, serial no. 121323, bowl diameter 75 cm, 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg Hodpfxoq H D Uws Al Isl

Kondisi: baru, tegangan masuk: 400 V, Spiraalknedermachine – Betrouwbaarheid, Efficiëntie en Moderne Technologie Spiraalkneders zijn essentiële machines in bakkerijen, banketbakkerijen en levensmiddelenverwerkende bedrijven. Daarom biedt elke spiraalknedermachine geavanceerde technologie, eenvoudige bediening en een robuuste constructie. Professionals waarderen onze machines vanwege hun constante prestaties en de eenvoudige integratie in productielijnen. Hoge Prestaties bij Deegbereiding Onze spiraalkneders verwerken deeg met een minimaal watergehalte van 40%. U kunt dus batches mengen vanaf 10% van het totale komvolume. Bovendien verwerkt de spiraalknedermachine zowel soepele als stevige degen met hoge efficiëntie. Daarmee is hij ideaal voor bakkerijen, productiebedrijven en banketbakkerijen. De spiraalkneder met vaste kom is daardoor een populaire en betrouwbare oplossing. Deze spiraalkneder garandeert immers consistente resultaten dankzij de stabiele, vaste mengkom. Spiraalkneder – Duurzame Constructie en Maatwerkopties De spiraalkneder heeft doorgaans een stevige, poedergecoate stalen behuizing. Optioneel is roestvaststalen bekleding leverbaar voor extra hygiëne in bakkerij- en voedingsomgevingen. Daarnaast zijn de kom, spiraal, schraper en beschermer vervaardigd uit zuurbestendig roestvast staal, wat zorgt voor een lange levensduur en eenvoudig reinigen na elk gebruik. Spiraalkneder met Modern Besturingssysteem Alle spiraalkneders beschikken over een gebruiksvriendelijk bedieningspaneel met dubbele snelheidsinstelling. De deegschraper is voorzien van een sensor om de deegtemperatuur tijdens het mengen te monitoren. Hiermee waarborgen onze spiraalkneders een constante kwaliteit door nauwkeurige temperatuurcontrole. Voor geavanceerde toepassingen is er een uitvoering met digitaal touchscreen beschikbaar, waarmee recepten geprogrammeerd kunnen worden en consistente resultaten bij grootschalige productie worden gegarandeerd. Stille en Betrouwbare Mengprestatie Dankzij moderne riemaandrijving werken onze spiraalkneders uiterst stil en efficiënt. De aandrijving zorgt voor een soepele werking, gebruiksgemak en een minimaal risico op uitval. Hodpfx Aox A S Rwol Ijl Energiezuinigheid en Aansluitvermogen De tweetoerenmotor drijft zowel de spiraal als de kom gelijktijdig aan. De uitvoering met vaste kom vereist een 400 V industriële aansluiting. De spiraalkneder met vaste kom is standaard voorzien van een handmatige noodbediening, zodat uw productieproces altijd kan doorgaan. Veiligheid en CE-Conformiteit Alle spiraalkneders voldoen aan de CE-veiligheidsnormen voor industriële voedingsmiddelenmachines. Elk onderdeel is ontworpen om ongelukken te voorkomen en de veiligheid van de gebruiker tijdens het gebruik te waarborgen.

Kondisi: bekas, Tahun pembuatan: 2011, 1 unit Crane STOCKER 1.2/2x05 Kapasitas angkat: 2x 250 kg, panjang sekitar 6 m, crane sudah dibongkar dan diletakkan di atas palet Warna: sesuai gambar dan berdasarkan inspeksi visual Tahun pembuatan: 2011 Kondisi: bekas Lokasi stok barang: luar ruangan Metode pembayaran: pembayaran di muka melalui transfer bank Hsdjy D Nc Ajpfx Al Iel Pengiriman: hanya penjemputan sendiri di lokasi Ditzingen-Heimerdingen

Kondisi: baru, Tahun pembuatan: 2026, 090202 Hedpfjwirx Dex Al Iol

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. Hjdpfefdkb Tex Al Iol The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. Hjdpfjh R Taqsx Al Iel The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Hedpjd Tqalofx Al Ijl - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) Hedjfdkb Uepfx Al Ijl - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Hsdsfdkbhepfx Al Iol - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) Hodjguk Dkjpfx Al Isl * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) Hjdpemhhy Nsfx Al Iol - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: bekas, Single-column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tonnes (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tonnes (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure dwell time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec Pressing speed up to 23.8 tonnes (238 kN): 5 to 68 mm/sec Pressing speed up to 100 tonnes (1000 kN): 5 to 16 mm/sec Return speed: 50 to 400 mm/sec Main pump motor rating: 18.5 kW Auxiliary pump motor rating: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard, and mouse - Machine control via SIEMENS S7-300 PLC - Ram stroke and pressing force programmable via the control - Drawing cushion with drawing and ejection function - Drawing cushion force infinitely variable - Ram and drawing cushion equipped with direct position measuring system - Drawing cushion can be moved in and out of the press area for punching operations using the through-hole - Floor-mounted setup, drawing cushion does not extend below floor level - Pressure and position cut-off Hsdoyupuljpfx Al Ijl - Fixed stop with indirect measuring system - Pressure dwell time infinitely programmable - Table surface with bores for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, manual lever, and pushbutton on control panel - LEUZE light curtain as reach-in protection for safety operation - Front mirror columns at the press table laterally movable - Electrical switch cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil/air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling on the ram - Piece counter in the control system - 306 recorded operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space required for press L x W x H: 3100 x 1800 x 4160 mm Weight: approx. 13 tonnes Very good, as-new condition

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 7 kW (9,52 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, konsumsi bahan bakar per jam: 4 l/j, kapasitas tangki bahan bakar: 10 l, warna: kuning, berat operasi: 1.200 kg, daya angkat: 300 kg/m, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, jumlah tempat duduk: 1, pendaftaran pertama: 06/2025, kelas emisi: Euro 5, tipe tiang: simpleks, volume sekop: 0,025 m³, lebar bucket penggalian: 40 mm, rem: lain, suspensi: lain, Tahun pembuatan: 2025, jumlah silinder: 1, Perlengkapan: 4-dalam-1 sekop, boom yang dapat disesuaikan, garpu palet, gerobak kemiringan, hidrolik, hidrolika gripper, palu hidrolik, sasis yang dapat disesuaikan, sekop standar, track karet, EKS12 mini-excavator – alat bantu yang ringkas dan andal untuk pekerjaan taman, perataan tanah, penggalian kecil, persiapan fondasi, dan pemeliharaan properti. Data teknis Berat: 1200 kg Kapasitas bucket: 0,025 m³ Dimensi: 2880 × 950 × 2000 mm Kedalaman gali: 1787 mm Tangki bahan bakar: 10 l Aliran hidrolik: 16 l/menit Mesin: KOOP 192F, 7,6 kW (diesel) Selang hidrolik berbahan logam Pendingin oli hidrolik Pilihan dan aksesori Mesin bensin 9,9 kW "Briggs & Stratton" yang lebih bertenaga (+225 €) Hedpfx Alsxf Apis Iel Ekstra: lengan berputar (+450 €), sasis yang dapat diperlebar (+675 €) 14 aksesori berbeda: bor, bucket perataan, bucket sempit, dll. Harga dan ketentuan €3430 + PPN Garansi: 12 bulan atau 1.500 jam kerja mesin

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Pelat tipe tersedia, For sale: Industrial plasma cutting machine Cebora Plasma Prof 254 HQC complete with PGC-3 gas console. This Italian-made machine is designed for heavy-duty industrial operation and CNC gantry integration. Technical Specifications - Model: Plasma Prof 254 - Manufacturer: Cebora (Italy) - Cutting current: 15–250 A - Duty cycle: 100% at 250 A - Operating voltage: 160 V - Open circuit voltage: 315 V - Power supply: 3-phase 380–400 V - Frequency: 50/60 Hz - Max. current consumption: approx. 74 A - Protection class: IP21 - Cooling: Forced ventilation Equipment Included - Plasma Prof 254 power source Hjdpfxjyt E Tho Al Isl - PGC-3 gas console - Cables - Plasma gas controls - Suitable for manual operation or CNC table integration Additional Information - HQC system – High Quality Cut - Torch type: Cebora CP251G - Max. gas pressure: 0.45 MPa - Air flow: approx. 1.7 kW Applications - Structural steel - Stainless steel - Aluminium - Capable of cutting thick industrial materials Condition Machine complete as shown in the pictures.

Kondisi: baru, Tahun pembuatan: 2026, - Capacity: 1.2 mm Hjdogg Nrkspfx Al Iel - Expansion: 250 mm - With 8 sets of rollers

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Pesa feeder belt 1.2 m conveyor belt 60 cm Pesa Length: 1195 mm Belt width: 600 mm Hsdpfx Aljmf Tkue Iol Protection class: IP54 3x400 VAC 0.37 kW 0.6 m/s Year of manufacture: 2008 You can find more items – both new and used – in our shop! International shipping costs available upon request!

Kondisi: bekas, Wire electrode, welding wire, welding wire Hodpfxefu Trko Al Ijl - Manufacturer: Böhler, partially used spool of MAG wire electrode - Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm - Dimensions: Ø 300 / 100 mm - Spool weight: 12.8 kg