Beli Scholl Ag Tangki Proses bekas (11.117)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Exenso Comfort penyetop otomatis untuk pengaturan panjang • Untuk digunakan pada gergaji potong, mesin bor, mesin penekan, dan lainnya. • Posisi batas material secara otomatis • Mode stopper dan pusher tersedia • Kontrol yang kompatibel dengan jaringan dengan berbagai opsi perangkat lunak dan antarmuka Sebagai pelengkap pada gergaji milik pelanggan atau sebagai komponen dalam sistem pemotongan penuh. Berbagai panjang setelan tersedia – pengiriman cepat! Antarmuka dan tambahan perangkat lunak dapat dikustomisasi. Gsdpfxsxmh Uyj Ahboiw Silakan hubungi kami!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, ASB length stop with digital display Measuring range: 1,000 mm, 1,500 mm, 2,000 mm, 2,500 mm, 3,000 mm, up to 6,000 mm Manual length measuring device with battery-operated digital display and fixed stop. Mounting on the right side (optionally on the left) Measuring accuracy: +/- 0.1 mm Total length: measuring length + 350 mm Permanently installed LCD readout Display powered by batteries with an approximate lifespan of 1,000 hours in continuous operation Minimal installation effort Freely selectable preset values Switchable between absolute and incremental measurement modes Giedpexu Iaxofx Ahbjw

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 01/40360/1117, tegangan masuk: 230 V, rentang pengukuran sumbu X: 2.750 mm, rentang pengukuran sumbu Y: 1.250 mm, rentang pengukuran sumbu Z: 85 mm, berat keseluruhan: 2.600 kg, Measuring range: 2,750 x 1,250 mm Factory-refurbished measuring table SN 01/40360/1117 (year of manufacture 2017) – Subject to prior sale - Operating system: Windows 10 For measurement of external dimensions and one-sided inspection of vertical and horizontal drilled holes in panel-shaped workpieces. APPLICATION AREA: Setup assistance: Measurement of first series piece Spot-check inspection: Measurement of random samples MEASURING CRITERIA: Godsw Ev N Sspfx Ahbjiw Dimensions: length, width, angle Vertical borehole: Position, diameter, depth, borehole distances Horizontal borehole: Position, diameter, depth, distance to the panel surface (NOTE: Test pins or installed dowels are required.) Groove: Edge distance, width, depth Radius: Center position, radius Rabbet: Width, depth Cut-outs: Width, edge distance Technical Data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: The measurement of vertical and/or horizontal boreholes, as well as grooves and rabbets on the Y-axis, is possible up to position 1,150 mm) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/-0.1 mm Resolution: 0.01 mm (NOTE: Uniform lighting conditions are required to maintain accuracy – independent of daylight) Measuring plane: High-precision, ground granite slab 3,200 x 1,340 x 150 mm Working height above floor: approx. 1,000 mm +/- 50 mm Space requirement (L/W/H): approx. 5,000 mm / 2,000 mm / 1,700 mm Weight approx.: 2,400 kg + control cabinet incl. operator panel approx. 200 kg Total electrical connection load: 2,500 W Compressed air connection: 6 bar Operator side: left Operating voltage: 230V/16A – (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35°C (NOTE: For higher temperatures, an air conditioning unit for the control cabinet is recommended - available as an option.) Technical changes reserved. The above performance data assumes suitable workpieces are used. Scope of delivery: • Automatic measuring table with 2-axis servo drive • Automatic camera height adjustment • 1x CAD4U software license and Hecht interface for measurement program creation on a PC in work preparation • 19” PC with CAD4U software license and interface for measurement program creation, current Results software version and Driver for measurement program processing, image processing software • Camera and lens and lighting for image capture • Operating system Windows Ultimate 64-bit • Rittal PC cabinet 600x1600x650 mm (WxHxD) • Test pins for measuring lateral bores: 10 pieces each with diameter 5, 6, 8 • 4x corner brackets for black parts • SQL Express database installed on the machine PC Languages: The operator software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian, and Chinese. Additional languages on request. SAFETY AND PROTECTIVE EQUIPMENT EMERGENCY STOP switch All machines for EU member states with CE mark in accordance with the EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be completely enclosed by a safety fence. This and other safety devices are not included in the scope of delivery.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, rentang pengukuran sumbu X: 2.500 mm, rentang pengukuran sumbu Y: 100 mm, rentang pengukuran sumbu Z: 65 mm, Stock machine – Subject to prior sale! Tactile 3-axis measuring table for quick and precise measurement of flat workpieces Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15" touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeatability X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeatability Z +/- 0.02 mm Resolution 0.01 mm Measurement functions: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Squareness ⦁ Parallelism ⦁ Borehole position X/Y ⦁ Bore diameter ⦁ Bore depth (relative) ⦁ Radii / Diameters ⦁ Groove position ⦁ Groove depth (relative) ⦁ Rebating position ⦁ Rebate depth (relative) ⦁ X/Y/Z-position of horizontal bores ⦁ Depth of horizontal bores (relative) Measuring program: 8-point measurement for 4-sided parts (e.g., rectangle, parallelogram, or trapezoid) Process: 8 points of the workpiece are probed (two points on each straight edge at the corners) Result: Display of 2 x length (top, bottom), 2 x width (right, left), 4 x angles Protocol: When target values and tolerances are entered, an actual/target comparison with deviation is created and displayed in tabular form. Saving of measurement results as PDF (protocol) or into an SQL database for statistical evaluation. Inspection and documentation of production status during the manufacturing process, after cutting, after edge-banding or after drilling operations according to the value-added stage. Vacuum system (Venturi principle) 6 vacuum suction cups integrated into the measuring area hold the workpiece in place during the measuring process. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power connection: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Control/operation: 15" touchscreen HECHT DesQ II software Windows 10 Gisdpfxew Ew Dqj Ahbsw

Kondisi: bekas, Tahun pembuatan: 2017, Kabinet sandblasting dengan sistem ekstraksi debu Kabinet sandblasting: Gedpoyddufsfx Ahbjiw Pabrikan: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Sistem ekstraksi debu: Pabrikan: Gläsner No. unit: 5V 3028 055 Tegangan: 400 V Frekuensi: 50 Hz Daya: 2,2 kW Kabinet sandblasting dijual bersamaan dengan sistem ekstraksi debu. Pembelian komponen secara terpisah tidak memungkinkan. Kunjungan untuk inspeksi dapat dijadwalkan sesuai perjanjian.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin semi-otomatis Pamasol Crimper 1" mesin penutup katup aerosol Gjdpfexiwadjx Ahbsiw Ekstraktor katup 1" untuk melepas katup dari kaleng Alat uji tekanan pecah P325 elektronik dengan visualisasi komputer Alat ukur Z18612, pengukur kontrol, Kröplin seri C

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Mesin hampir tidak pernah digunakan dan sepenuhnya berfungsi. Gsdpfx Ahoyfnd Hebjiw

Kondisi: bekas, Berat 60 kg Berat min. 0,4 kg Gsdpoxytursfx Ahbjiw

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration, equipped with Müdata, Mütrans, without warp beam rack, exceptionally clean, sourced from Germany, second-hand. NF42 in 4/42mm from 1988-1990: Godper I Am Hofx Ahbeiw AN. No.: 88.04.017 H ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros AN. No.: 88.04.169 D ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AN-No.: 88.04.017 D, 8 units of very clean (refurbished) Jakob Müller Frick AG looms, model NF42, from 1988, 1989, and 1990 available from my stock. All machines are in excellent working condition and have been completely overhauled (100% fully functional). Features: - 12 shafts, without rack, with Mütrans, some with Müdata Offered machines: 1 unit NF 2/84mm from 1989 for €6,900 - Serial No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, overhauled, from 1990 at €6,500 each Giedpfxjr Ix Igj Ahbew - Serial Nos.: 90.01.704 B; 90.01.755 A; 90.01.229 A 1 unit NF 2/84mm, overhauled, from 1989 for €6,500 - Serial No.: 89.00.118 D 3 units NF 2/84mm, overhauled, from 1988 at €6,500 each - Serial Nos.: 88.04.244 A; 88.02.758 A; 88.02.758 B Background and Technical Details: - The machines originate from curtain tape production and were originally equipped with Z compartments. These have been converted to standard compartments as part of the general overhaul. - All tension beams and pressure rollers have been newly vulcanized by Westland. - The chain box card rollers are new or newly vulcanized. - Central lubrication in the chain box has been optimized. - All machines have a free first shaft (to accommodate heavier reeds) and are fitted with 12 shafts. - All come equipped with Mütrans II. Options: - Individual machines can be supplied with double-belt take-off for heavy fabrics (possible for 4–5 machines). - Option to equip with finely knurled tension beams (possible for 4–5 machines). - All needle holders are suitable for double needles; two additional Mütrans II units can be installed on request. Reconditioning: - The machines have been fully refurbished, with all bearings, shafts, and bushings checked and replaced as needed. - All swing arms were checked and replaced if necessary: 1st shaft – free (spacer block installed) 2nd/3rd shafts – swing arm 201 4th–6th shafts – swing arm 202 7th–9th shafts – swing arm 203 10th–12th shafts – swing arm 204 13th shaft – swing arm 205 - All shaft springs checked and replaced if necessary; no porous, cracked, or defective parts. - Electrical systems and thread monitoring boards have been tested and repaired or replaced as needed. - Machines painted in RAL 6021 Müller pale green. - All panels clean and free of damage. - Machines are supplied without Müdata. - 4 machines come with crawler gear. - All machines have been set up and test run. Scope of Supply: - Machines are delivered without oil, warp yarns, slats, reeds, needles, or chain links. - Delivery on Euro pallet, FOB Wuppertal.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Leutenegger (Starrag) Washing Booth Technical Data Year of manufacture: 2000 Bath capacity: approx. 0.9 m³ Gsdpfx Ahed Ncihobeiw Chemicals: Henkel P 3 Voltage: 3x400V/230V 50 Hz Power supply: 40 A Control voltage: 24 V DC Maximum temperature: 50° C Heating: electric Heating power: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m³/h Shipping costs on request Further items – both new and used – can be found in our shop! International shipping costs on request!

Kondisi: baik (bekas), leutenegger-waschbox-angebot Godpfxod Nlybe Ahboiw

Kondisi: baik (bekas), balzers-lte-020 Giedpfoxl A Edsx Ahbjw

Kondisi: baik (bekas), Tahun pembuatan: 2016, bosch-rexroth-linear-zylinder-maschine Gjdpfxjhufclj Ahbjiw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 216 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20MS090000/007, panjang total: 3.000 mm, jenis arus masuk: AC (pendingin udara), lebar total: 2.500 mm, tinggi total: 1.900 mm, berat keseluruhan: 1.450 kg, berat kosong: 1.450 kg, lebar kerja: 900 mm, sambungan udara terkompresi: 6 batang, kecepatan throughput: 50 mm/dtk, Laminating and longitudinal splicing machine For veneer thicknesses from 0.4 to 3 mm with direct gluing. With edge pre-gluing up to 5 mm. Machine with very low usage, Available ex site. Electric motor, separate for chain drive and glue application. Glue is applied to the edge of the newly inserted veneer strip, which increases the bond strength. Robust, durable stainless steel feed chain with pivot joints. Separate adjustment for temperature, speed, and pressure. Quick and easily accessible glue trough for fast and easy refilling or cleaning. Multiple heating zones for individual temperature settings. Gijdpfxjw E Rfbe Ahbsw Extended glue trough life due to integrated cooling unit. Continuously adjustable feed speed. INCLUDES GLUE COOLER Technical Data: Throat depth: 900 mm Veneer strip width min.: 45 mm Veneer strip length min.: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heated section length: 1000 mm Max. heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2007, jam operasional: 1.153 h, de Gedpfx Ahsx Tdyzobjiw

Kondisi: bekas, Diese Anzeige bezieht sich auf einen Eppendorf Concentrator AG Das Gerät befindet sich in einwandfreiem, voll funktionsfähigem Zustand und ist sofort einsatzbereit. Der Eppendorf Concentrator plus ist ein kompaktes Tischgerät zur effizienten und schonenden Vakuumkonzentration von DNA, RNA, Nukleotiden, Proteinen und anderen flüssigen oder feuchten Proben. Das System verfügt über eine fortschrittliche Heiztechnologie sowie eine chemikalienbeständige, wartungsfreie PTFE-Membranpumpe – Ölwechsel sind daher nicht erforderlich. Das System ist vielseitig einsetzbar dank einer großen Auswahl an Rotoren für Gefäße von 0,2 ml bis 50 ml sowie für Mikrotiter- und PCR-Platten. Hauptmerkmale Giedpjxv D D Njfx Ahbjw - Motorloser Antrieb und abgedichtete Kammer für störungsfreien Betrieb - Flüsterleiser Betrieb (60 dB), auch beim Einsatz der Pumpe, für ein angenehmes Arbeitsumfeld - Automatische Vakuumfreigabe verhindert Stoßen oder Aufschäumen der Proben - Integrierter Bremsmodus für einen schnelleren Rotorstopp und zügigen Zugriff auf die Proben - Drei Verdampfungsmodi (wässrig, Alkohol, Aus) - Vier Heizstufen (30°C, 45°C, 60°C und Umgebungstemperatur) für optimale Anpassung an Probe und Lösungsmittel zur Verkürzung der Bearbeitungszeit Systemoptionen Basissystem - Beinhaltet den Vacufuge Concentrator und einen Rotor für 48 x 1,5 bis 2,0 ml Gefäße - Netzanschluss für den externen Vakuumpumpenbetrieb - Sämtliche Pumpenfunktionen einschließlich Vakuumfreigabe und Verdampfungsmodi werden direkt am Concentrator gesteuert

Kondisi: bekas, nomor mesin/kendaraan: 10169, Leather skiving machine Fortuna 50 PU-AG - Skiving width: 0 - 50 mm - Skiving angle: 0° - 20° - Operation: foot-operated - Feed: steplessly adjustable via clutch - Feed speeds: 270, 350, 520, 650 mm/s - Chip and dust extraction - Motor speed: 1400 min⁻¹ - Power supply: 380 V, 3-phase, 50 Hz - Rated power: 0.55 kW - Dimensions (L x W x H): 1050 x 550 x 1160 mm - Weight: approx. 130 kg Online video inspection available via Skype Video. We would be very pleased to welcome your visit—more machines in stock. Immediately available—can be inspected. Located at Emskirchen / Nuremberg—testing possible. Gisdpfx Ahsh I Rh Hsbjw

Kondisi: perlu perbaikan (bekas), Otomatisasi Tangki Ekspansi yang Dikendalikan Kompresor, Flamco Flexcon M-K 1600, Mesin Bekas Produsen: Flamco B.V. (Belanda) – Produsen terkemuka teknologi sistem HVAC dan pemanas Tipe / Seri: Flexcon M-K 1600 (Otomatisasi ekspansi yang dikendalikan kompresor) Tipe sistem: Tangki ekspansi berdiafragma dengan unit kontrol untuk sistem pemanas dan pendingin Kapasitas nominal: 1600 liter Kondisi: Bekas, Kompresor tidak ada di dalam tangki Dimensi keseluruhan: Parameter teknis dan operasional: Giedpfx Aezkbcrohbjw Tekanan kerja maksimum: 6,0 bar / 10,0 bar (tergantung pada varian model tertentu, harus diverifikasi pada pelat nama) Suhu sistem maksimum: 120 °C Suhu diafragma kontinu maksimum: 70 °C Tegangan kontrol / suplai: 230 V / 50 Hz (atau 400 V tergantung pada konfigurasi blok kompresor) Kelas perlindungan: IP 54 (Lemari kontrol terlindungi dari debu dan percikan air) Area Aplikasi yang Sesuai: Flexcon M-K adalah unit ekspansi berperforma tinggi yang dikendalikan kompresor, yang dirancang khusus untuk menjaga tekanan dalam sistem pemanas, tenaga surya, dan pendingin yang tertutup. Sistem pemanas industri dan jaringan: Pemeliharaan tekanan yang presisi dan stabil untuk jaringan pemanas berskala besar dan stasiun termal. Gedung perkantoran dan fasilitas umum: Kompensasi volume ekspansi untuk sistem HVAC, pendingin, dan pemanas terpusat. Degasasi optimal: Operasi yang dikendalikan kompresor meminimalkan penurunan tekanan sistem, mencegah pembentukan gelembung, dan mengurangi korosi saluran pipa.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Tank container: Kontainer kotak baja 20 kaki dengan tangki polietilen terintegrasi berkapasitas 25.700 liter (ketebalan dinding 1 cm). Hanya untuk produk non-berbahaya (air, minyak, alkohol, dll), bukan untuk bahan ADR. Suhu sampai -40°C. 1. Kondisi: baru, belum pernah digunakan, dengan plakat CSC yang masih berlaku 2. Volume: 25.700 liter 3. Katup dekompresi Gedezk Dmtopfx Ahbsiw 4. Tekanan kerja penutup: 7 Bar 5. Suku cadang termasuk: katup dekompresi, katup keluar, penutup mangkuk 6. Warna pilihan sudah termasuk (jika pre-order) 7. Logo perusahaan sudah termasuk (jika pre-order) 8. Tangki bisa dilepas 9. Transportasi: Penawaran pengiriman gratis & tidak mengikat (termasuk unloading jika diinginkan) – cukup informasikan kode pos. 10. Foto asli 11. Pre-order Kami menantikan kontak Anda! NAUTEXA GmbH

Kondisi: bekas, berat muatan maksimum: 32.090 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2023, inspeksi berikutnya (TÜV): 01/2027, volume ruang muat: 30 m³, lebar total: 2.550 mm, tinggi total: 3.685 mm, Tahun pembuatan: 2023, Perlengkapan: ABS,

Kondisi: bekas, Tahun pembuatan: 2020, Mesin EDM (Electric Discharge Machine) jenis sinker Perjalanan sumbu X: 600 mm Perjalanan sumbu Y: 420 mm Perjalanan sumbu Z: 370 mm Ukuran meja X: 750 mm Ukuran meja Y: 550 mm Ukuran maksimal benda kerja X: 950 mm Ukuran maksimal benda kerja Y: 740 mm Ukuran maksimal benda kerja Z: 450 mm Bobot elektroda maksimal: 50 kg Bobot benda kerja maksimal: 1500 kg Penukar elektroda: 32 posisi Poros C Generator: 60 ampere Pendingin Tangki dapat diturunkan Gsdpfxszg T Ewe Ahboiw Poros C Penukar elektroda 32x

Kondisi: baik (bekas), Tangki hidrolik, wadah hidrolik, wadah aluminium untuk pompa hidrolik, unit hidrolik -Produsen: Bieri, tangki hidrolik untuk unit hidrolik -Tangki hidrolik: dilengkapi dengan filter dan indikator level Gedpfx Ahszk Etusbjiw -Komponen individual: lihat foto -Dimensi: 340/245/T300 mm -Berat: 6,1 kg

Kondisi: baik (bekas), Tahun pembuatan: 2008, VEREM 3-axle low loader trailer, year 2008. Deck length: 9.20 m. GVWR: 42 t. Payload: 32 t. Gooseneck length: 3.40 m. Gjdjup Ih Ejpfx Ahbeiw

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0008884 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: IMA COMBIMA/NOVIMAT Edgebander - If interested, we offer overhaul service. Please contact us. Gsdpev Hgmfsfx Ahboiw