Beli Stanko Mesin Bor Radial bekas (78.722)

Kondisi: bekas, Tahun pembuatan: 1997, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,000 mm Max. workpiece height: 1,250 mm Table size: 1,150 x 690 mm Spindle taper: MT 4 Spindle speeds: 40 - 1,400 rpm Feed range: 0.08 - 0.40 mm/min Horizontal arm travel: 800 mm Ibjdsl Ha Twjpfx Al Tsa Vertical arm travel: 700 mm Spindle stroke: 220 mm Drive power: 3.5 kW Operating voltage: 380 V Total power requirement: 4.0 kW Machine weight approx. 1.6 t - Factory No.: A01/446/97 - Adjustable cube table 600 x 500 x 500 mm - Coolant device - Machine lamp

Kondisi: sangat baik (bekas), Tahun pembuatan: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle taper MK 5 Arm reach 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-stage 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Iedpfx Ajtwzk Djl Tsba Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Power feed • Forward/reverse run • Motorized height adjustment • Wide speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Kondisi: baik (bekas), Csepel bor radial Tipe: RF50/1600 Panjang lengan: 1600 mm Kapasitas pengeboran maks.: 50 mm Kecepatan spindle maks.: 2000 1/menit Tinggi mesin: 2830 mm Panjang mesin: 2190 mm Ibodpfxjyubmts Al Tea Kedalaman mesin: 950 mm Berat: 3050 kg Dalam keadaan teraliri listrik di gudang kami.

Kondisi: baik (bekas), Tahun pembuatan: 1996, Mesin bor radial tipe Reform RB50x12 dijual dalam kondisi baik. Kapasitas: Maks. 50mm pada baja. Panjang lengan: 1250mm Jarak poros ke kolom minimal: 350mm Taper: MK5 Langkah: 315mm Kecepatan spindle: 25 – 2000 rpm, 16 tingkat Kecepatan makan: 0,04-3,2 mm/putaran Motor utama: 3kW Berat: 3000kg Dimensi: 2150x1060x2840mm Mesin penjepit secara hidrolik, dilengkapi dengan tombol pemberhentian darurat. Ibjdpfx Aljxftk Re Tsa Mesin dalam kondisi hidup di gudang kami.

Kondisi: baik (bekas), Tahun pembuatan: 1985, Spindle speeds - infinitely variable 26 - 1650 rpm Operating voltage 380 V Frequency 50 Hz Rated current 15 A Connected load 6.5 kW Ibsdpovylh Ujfx Al Tsa Tool holder MK 4 Machine weight approx. 2.3 t Space requirements approx. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connected load: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column traverse speed: 40 mm/s Column stroke: 450 mm Quill stroke: 200 mm Drilling area: 430 - 1150 mm Spindle height adjustment: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Kondisi: bekas, Tahun pembuatan: 1986, de-001 Iodpfxeyv N Euo Al Tjba

Kondisi: bekas, Tahun pembuatan: 1996, 1649258151 Ibjdpfjyv N Ehox Al Tsa

Kondisi: baru, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €39,200 Leasing rate: €748.72 Drilling capacity in mild steel: 50 mm Spindle taper: MT 5 Arm length (column to spindle): 350 - 1,600 mm Spindle speeds: 56 - 1,450 (12 steps) rpm Thread cutting capacity (steel/cast iron): M40/M50 Length: 2,670 mm Width: 1,120 mm Height: 2,410 mm Weight: 3,300 kg Distance from table to spindle nose: 465 - 1,420 mm Automatic feeds: 0.06 - 0.2 (3 steps) mm/rev Spindle motor power: 3.7 kW Column diameter: 320 mm Quill stroke: 270 mm Iedpsynmt Sjfx Al Tsba Table size: 2,550 x 970 x 200 mm Elevating motor: 1.5 kW Box table dimensions: 630 x 500 x 500 mm Maximum height: 2,760 mm Clamping motor: 0.75 kW Right and left-hand rotation Automatic feed Drilling depth stop Manual spindle head travel with hydraulic clamping Electric height adjustment of the arm with hydraulic clamping Hydraulic clamping for arm swivel motion Centralized operation at the machine front Load meter for drilling spindle Handwheel for fine quill feed Coolant system Machine lamp Box table Machine and equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH

Kondisi: baru, condition new Delivery time approx. 6 months from order Country of origin: Taiwan Price: €30,100 Leasing rate: €574.91 Drilling capacity in steel: 50 mm Spindle taper: MT 5 Arm reach: 360 – 1,250 mm Speeds: 44 – 1,206 rpm (12 steps) Thread cutting capacity, steel/cast iron: M40 / M50 Length: 2,060 mm Width: 995 mm Height: 2,240 mm Weight: 2,300 kg Distance table to spindle end: 441 – 1,345 mm Automatic feeds: 0.06 – 0.2 mm/rev (3 steps) Spindle motor: 3.7 kW Column diameter: 300 mm Quill travel: 270 mm Iedpsynmt Eofx Al Tsba Table: 1,785 x 785 x 190 mm Lift motor: 0.75 kW Box table dimensions: 635 x 520 x 420 mm Maximum height: 2,645 mm Clamping motor: 0.75 kW Right- and left-hand rotation Automatic feed Drilling depth stop Manual spindle head adjustment with hydraulic clamping Electrical height adjustment of the arm with hydraulic clamping Hydraulic clamping for arm swivel movement Central control panel at machine front Current load indicator for drilling spindle Handwheel for fine feed on quill Coolant device Machine lamp Box table Machine and equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH

Kondisi: baru, column diameter: 320 mm Dimensions (LxWxH): 2670 x 1120 x 2760 mm Approx. weight: 3200 kg Drilling capacity: Steel (S235JR) – 50 mm Drill table T-slot size: 14 mm Drill table T-slot spacing: 180 mm Clamping table length: 630 mm Clamping table height: 500 mm Connected load: 6.5 kW Max. spindle-to-table distance: 1420 mm Speed range: 44 – 1023 rpm Number of speed ranges: 12 Max. spindle-to-column distance: 1600 mm - Versatile applications, e.g. drilling, reaming, threading - Electrically braked motor Ijdpfxjwruk Io Al Tsba - 24V DC electrics and 2-channel safety circuit per DIN EN 12717 - Heavy-duty, high-quality cast iron construction - Wide throat due to horizontally adjustable machine head - Clearly arranged control panel - Smooth-moving swivel and travel axes - Elaborately designed column swivel with optimized clamping for maximum stability and minimal offset - Robust, torsion-resistant arm construction - Arm height adjustment via powerful motor drive and elevating spindle - Drill head gearbox runs in oil bath - Arm guideways are hardened and precision ground - Gearbox gears made from hardened and precision-ground chrome-nickel steel for smooth, quiet operation - Drill head and column can be clamped or released together or separately - Forward and reverse operation - Massive, precise, generously dimensioned drill table - Hardened and ground clamping table with parallel T-slots - Machine lamp - Overload protection - Thick-walled cast column for excellent smoothness and stability - LED lamp - Coolant system with coolant tank integrated in machine base RD 6 / RD 7 - Column is hydraulically clamped

Kondisi: baru, Column diameter: 260 mm Dimensions (L x W x H): 1725 x 745 x 2550 mm Weight approx.: 1800 kg Drilling capacity: Steel (S235JR) – 42 mm Drill table T-slot size: 19 mm Drill table T-slot spacing: 171 mm Ibodpfxswrukze Al Toa Clamping table length: 635 mm Clamping table height: 415 mm Connected load: 4 kW Max. distance spindle – drill table: 1270 mm Speed range: 37 – 1253 rpm Number of speed ranges: 12 - Versatile applications such as drilling, reaming, and tapping - Electrically braked motor - 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 - Heavy, solid, premium quality cast construction - Large reach thanks to horizontally adjustable machine head - Clearly arranged control panel - Smooth-operating swivel and travel axes - Elaborately constructed column swivel with optimized clamping for maximum stability and minimal clamping offset - Robust, torsion-resistant boom design - Boom height adjustment via powerful motor drive and lifting spindle - Drilling head gear runs in oil bath - Boom guideways hardened and precision ground - Gear wheels made from hardened and precision-ground chrome-nickel steel for quiet and smooth operation - Drill head and column can be clamped or released together or separately - Forward/reverse operation - Solid, precise, large-format drill table - Hardened and ground clamping table with parallel T-slots - Machine lamp - Overload protection - Thick-walled cast column ensures high smoothness and stability - LED lamp - Coolant device with coolant tank integrated in the machine base RD 4 / RD 5 - All axes manually clamped

Kondisi: baru, Column diameter: 432 mm Dimensions (LxWxH): 3050 x 1185 x 3050 mm Weight approx.: 5,600 kg Drilling capacity: Steel (S235JR) - 70 mm Clamping table length: 1,000 mm Clamping table height: 500 mm Ibsdpowruk Ujfx Al Tea Connected load: 11 kW Speed range: 44 - 1,023 rpm Number of speed ranges: 29 - 1,575 rpm Travel distance - X: 1,185 mm Travel distance - Y: 1,000 mm - Versatile application areas such as drilling, reaming, and thread cutting - Electrically braked motor - 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 - Heavy, solid, premium quality cast iron - Wide outreach due to horizontally adjustable machine head - Clearly arranged control panel - Smooth-running swivel and travel axes - Elaborately engineered column swivel with optimized clamping for maximum stability and minimal clamping offset - Rigid, torsion-resistant jib arm construction - Arm height adjustment via powerful motor drive and feed screw - Drill head gearbox runs in oil bath - Jib arm guideways hardened and precision ground - Gear wheels made of hardened and precision-ground chrome-nickel steel for low-noise and smooth operation - Drill head and column can be clamped or released together or separately - Forward and reverse operation - Massive, precise drilling table, generously dimensioned - Hardened and ground clamping table with parallel T-slots - Machine lamp - Overload protection - Thick-walled cast column ensures high running smoothness and stability - LED lamp - Coolant system with coolant tank integrated in the machine base RD 6 / RD 7 - Column clamping is hydraulic

Kondisi: baru, en-GB:Column diameter: 210 mmDimensions (LxWxH): 1260 x 700 x 2180 mmWeight approx.: 1120 kgDrilling capacity: Steel (S235JR) - 32 mmColumn diameter: 210 mmDrill table T-slot size: 19 mmDrill table T-slot spacing: 171 mmClamping table length: 600 mmClamping table height: 380 mmConnected load: 3 kWMax. distance spindle to drill table: 1060 mmSpeed range: 73 - 1247 rpmNumber of speed ranges: 6 OPTIdrill RD 4 Precision radial drilling machines, robust design and top-tier quality. Ideal for flexible use in single-part and series production. - Versatile areas of application, e.g. drilling, reaming, and tapping - Motor with electric brake - 24V DC electrics and dual-channel safety circuit per DIN EN 12717 - Heavy-duty, high-quality cast construction - Wide reach thanks to horizontally adjustable machine head - Intuitively arranged control panel - Smooth-operating swivel and traverse axes - Elaborately engineered column swivel with optimised clamping for maximum stability and minimal clamping offset - Sturdy, torsion-resistant boom construction - Height adjustment of boom via powerful motor drive and lifting spindle - Drill head gearbox runs in an oil bath - Boom guideways are hardened and precision ground - Gearbox gears made of case-hardened, precision-ground chrome-nickel steel for smooth, quiet operation - Drill head and column can be clamped or released together or separately - Forward and reverse - Solid, precise, large-sized drill table - Hardened and ground clamping table with parallel T-slots - Machine lamp - Overload protection Isdpfjwrukuex Al Tjba - Thick-walled cast column for excellent smoothness and stability - LED lamp - Coolant system with built-in coolant tank at machine base RD 4 / RD 5 - All axes are clamped manually

Kondisi: baik (bekas), Kapasitas bor: Ø 50 mm Pemasangan spindle: MK5 Kecepatan spindle: 18 - 2.000 rpm Jangkauan spindle: 400 mm Jangkauan horizontal maks: 1.250 mm Iodpoy Ia Azsfx Al Tjba Spindle ke meja dasar maks: 1.600 mm Dilengkapi dengan: - Perangkat tapping - Meja bor Berat mesin: 4.500 kg Dimensi mesin P×L×T: 2.800 x 1.000 x 3.500 mm

Kondisi: baru, Tahun pembuatan: 2024, Power: 1.35 kW Speed range: 230 – 3100 rpm Number of speed steps: 9 Spindle mount: MT2 (Morse taper 2) Drilling stroke: 85 mm Spindle reach: 140 - 540 mm Table size: 500 x 740 mm / load capacity: 250 kg Iodpfxouix Sgs Al Teba Head tilt: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Kapasitas pengeboran pada baja (diameter) 80 mm Jarak sumbu horizontal 2000 mm Isdpoy H Dauofx Al Toba Tinggi benda kerja - sekitar 1300 mm Diameter bor ulang pada baja 100 mm Diameter bor ulang pada besi cor 115 mm Pengeboran ulir pada ST 60 M 68 mm Kecepatan spindle 16 - 1250 rpm Jumlah kecepatan spindle 32 Langkah spindle 550 mm Jumlah pengumpanan 18 Pengumpanan 0,06 - 3,0 mm/putaran Jarak spindle/meja dasar 480 hingga 1800 mm Diameter kolom 500 mm Motor spindle 11 kW Motor pengangkat 4 kW Total kebutuhan daya 15 kW Berat mesin sekitar 8500 kg Dimensi dasar 3200 x 1250 x 3600 mm dengan meja kerja 1500 x 1000 x 500 mm

Kondisi: baik (bekas), Tahun pembuatan: 1995, Bor mesin radial bekas merek Foradia Tipe: GR 50 1200 Jangkauan: 1200 mm Diameter bor hingga: 50 mm Tahun pembuatan: 1995. Isdpfx Aljytb Eye Toba

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 Ijdsynt Ucepfx Al Tsba GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 1965, Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 930 mm, For sale is a Donau DR30 rapid radial drilling machine. The machine is in good and fully functional condition. Technical data: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle taper: MK 3 Spindle speeds: stepless approx. 45 – 2240 rpm Quill stroke: approx. 170 mm Arm reach: approx. 930 mm Arm swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Isdewal Hpopfx Al Tsba Tapping device with cut-off and reverse function. Motorized height adjustment of the arm. Left-hand drilling operation by hand & foot control. Transport and loading can be organized at extra cost, Europe-wide, on request. All prices are plus VAT. Viewing possible by appointment. Contact us — our team will be happy to assist you! Trade-in or exchange possible! Machinery purchase / sales BUY / SELL OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Kondisi: bekas, Clamping plate with T-slots made of cast iron Base plate from a radial drilling machine Assembly table, assembly station, base plate for pillar slewing crane Length: 1850 mm Width: 915 mm Plate thickness: 230 mm Table surface with T-slots: 1030 x 750 mm - Clamping surface with 22 mm T-slots, spacing = 250 mm - Top surface milled parallel to the underside = clamping surface - Milled underside; also the ribs rest flatly and provide support Iodpeh R D Uzsfx Al Toba - Ideal as a base plate Net weight: 1140 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Iedpfxjylnpis Al Toba Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed Ibodpfeyhdvksx Al Tja • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Ibsdpfx Aovv Spkel Toa Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Ibedpfx Alsu Dg D Ao Tea Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 1991, penjepit spindle: MK 4, Meja kerja 600mm x 1200mm Perjalanan lengan 600mm Pemasangan alat MK 4 Kapasitas bor 40mm pada baja Perangkat pengetapan ulir Ibjdpfx Aljx N Ifte Tja Perangkat pendingin Dokumentasi