Beli Vötsch Ntu 60/60 bekas (23.985)

Tahun pembuatan: 2003, Kondisi: bekas, 2 unit tersedia Dimensi (dalam): 320 x 270 x 400 (t) mm Dimensi (luar): 920 x 800 x 600 (t) mm Kapasitas ruang suhu: sekitar 35 liter Rentang suhu: -70°C hingga +180°C Saluran pipa: 85 mm Fedjxyzvdopfx Aaqjgb Tegangan listrik: 230V +6/-10% 1/N 50Hz Arus nominal: 10A Daya nominal: 2 kW RS232 Tipe: VT 7004

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. Fodpfx Aajwc Afhjqsgb For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary.

Kondisi: bekas, Designation: Emission Test Chamber Manufacturer: Vötsch Model: VCE 200 Test Chamber Volume: 200 litres Temperature Range: +20°C to +130°C Humidity Range: 30 to 95% RH Temperature Deviation: temporal ± 0.3 K Temperature Deviation: spatial ± 0.5 K Average Temperature Change Rate: cooling approx. 0.3 K/min, heating approx. 0.4 K/min Dew Point Range: +5°C to 60°C Humidity Deviation: temporal ± 1 to 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated Power / Rated Current: 21 kW / 41 A Refrigerant: R404A Internal Chamber Dimensions: 610 x 610 x 560 mm (W/D/H) Overall Dimensions: 1250 x 1700 x 2350 mm (W/D/H) Weight: approx. 750 kg Fgsdpfxoxg Hrqs Aaqsb Item Condition: Used item as shown in the photos. Please contact us if you have any questions. Shipping: Quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside Germany) Sale to commercial customers only, without warranty or guarantee. Technical data may differ; errors in the description reserved.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Modular plant growth chambers Fitotron®, Model HGC 1014 V including lighting module HQI-T and Krypton Temperature range -10°C to +45°C for temperature testing Test chamber volume approx. 1300 l Simpac controller Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on a modular design. Individual modules can be added or exchanged as needed, allowing for adaptation to various applications. Suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Fsdpov Ivn Usfx Aaqogb Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% r.h. Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% r.h. approx. 0.8 kW Specifications for climate tests with irradiation: Temperature range +10°C to +45°C with lights on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% r.h. Humidification and dehumidification system, test chamber stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Tube port ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Modular Fitotron® Plant Growth Chambers, Model HGC 1014 V incl. HQI-T and Krypton Lighting Module Temperature range: -10°C to +45°C for temperature tests Test chamber volume: approx. 1300 l Simpac control system Network connection USB interface The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or exchanged as needed, allowing adaptation to various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% r.h. Fresh air: up to 7.5 m³/h Power consumption (without fresh air operation) at 25°C / 75% r.h.: approx. 0.8 kW Fjdpfx Aasv Ivnzoqjgb Parameters for climate tests with illumination: Temperature range: +10°C to +45°C with light on +10°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% r.h. Humidification and dehumidification system, test chamber stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Computer interface Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, excellent condition Tube duct ∅ 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, Modular plant growth chambers Fitotron®, type HGC 1014 V incl. HQI-T and Krypton lighting module Temperature range: -10°C to +45°C, suitable for temperature testing Test chamber volume: approx. 1300 l Simpac controller Network connection USB interface The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or exchanged as needed, allowing customization for different applications. The chambers are suitable for plants with high light requirements such as wheat, corn, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temperature stability: ± 0.5 K over time Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity stability: ± 3 to 5% RH over time Fresh air supply: up to 7.5 m³/h Power consumption (excluding fresh air operation, at 25°C / 75% RH): approx. 0.8 kW Specifications for climate tests with lighting: Temperature range: +10°C to +45°C (with lighting on) Temperature stability: ± 0.5 K over time Fgodpfov Ivn Iex Aaqsb Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity stability: ± 3 to 5% RH over time Humidification and dehumidification system, test chamber made from stainless steel Internal dimensions: height 1400 mm, depth 750 mm, width 1270 mm External dimensions: height 1985 mm, depth 980 mm, width 2320 mm External dimensions with lighting module: height 2450 mm Single-door with observation window Interface for computer connection Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Tube port diameter: 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, 2 units GMP-compliant vacuum drying ovens, Vötsch Industrietechnik (also available separately). Product-contacting material: Stainless steel 1.4435. Heating type: externally heated hollow inserts, top cover also heated, double-walled with internal meander baffles, pressure-tight up to 3 bar. Heating via a separate heating/cooling circuit (indirect heating with hot water) using a separate hot water thermostat. Operating temperature: max. 95°C, operating pressure inner chamber: 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Tray dimensions: 1200 mm width x 950 mm depth Number of trays: 13 pcs Usable area: 14.8 m² Weight: approx. 2900 kg per dryer Connections: hot water supply (flow and return), vacuum connection Fjdpfx Ajucdqnjaqogb Heating of the vacuum drying ovens with a heat transfer medium (e.g. water), connections at the rear. Heating medium temperature controlled by temperature control unit type 95-36-E, rated voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating power can be reduced to 18 kW in a defined temperature range.

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: belum diuji, nomor mesin/kendaraan: GTTS 220, tinggi total: 144 mm, panjang total: 135 mm, lebar total: 96 mm, Perlengkapan: dokumentasi / manual, Kamar iklim bekas Votsch/Weiss GTTS 220 Fedpfox H N Drox Aaqsgb Produsen: Votsch/Weiss Model: GTTS 220 | 20 Dimensi luar: 135 cm x 96 cm x 144 cm (panjang x lebar x tinggi) Dimensi dalam maksimum: 65 cm x 92 cm x 54/40 cm (lebar x kedalaman x tinggi) Tegangan: 220/380 V Jenis refrigeran: R12 Dilengkapi dengan buku manual (buku petunjuk instalasi dan operasi)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 21.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190332, gaya penjepit: 1.000 kN, berat injeksi: 15 g, gaya ejektor: 66.000 N, lintasan ejektor: 225 mm, panjang pelat: 795 mm, No reserve price – guaranteed sale to the highest bidder! Fgjdpsy Hki Aofx Aaqjb Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high wear resistance, fixed) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control: Selogica Clamping unit: hydraulic Operating hours: 21,200 h EQUIPMENT 1 vertical injection unit, mounted on supports instead of on clamping platens for the second injection unit, manually operated, working position adjustable between 70 and 250 mm 2 x core pullers Open nozzle 15 mm, wear-resistant, without heating band (1st injection unit 150) Technology Level 2 – servo-controlled hydraulic system with two variable-displacement pumps Technology Level 3 hydraulic system with three variable-displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line in 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the third injection unit for VE 906/00 – injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm, wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/Manual

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.275 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 02/2023, panjang total: 13.550 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2023, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: baru, Mesin Frais Universal Merek: OPTimill Model: MT 60 Nomor Artikel: 3336090 Kondisi: Mesin Baru Fgjdpfog Anfnex Aaqsb Perjalanan sumbu: - Sumbu X: 750 mm - Sumbu Y: 230 mm - Sumbu Z: 360 mm Perlengkapan standar: - Indikator digital 3-sumbu DPA 31 PLUS - Otomatis feeding pada sumbu X - Dudukan chuck bor B 18 - Chuck bor gigir 3-16 mm / B 18 - Sleeve pereduksi MK 2 dengan celah pengeluar - Sleeve pereduksi MK 3 dengan celah pengeluar - Batu alur T - Perangkat pendingin - Lampu LED - Alat bantu pengoperasian - Manual pengoperasian

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.806 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 02/2020, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2020, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.917 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 02/2021, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2021, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 1.686 h, kapasitas angkut: 2.500 kg, tinggi angkat: 5.180 mm, pengangkatan bebas: 1.750 mm, pusat beban: 600 mm, tipe tiang: triplex, tinggi konstruksi: 2.382 mm, kapasitas baterai: 560 Ah, tegangan baterai: 80 V, Tersertifikasi DGUV hingga: 05/2027, panjang garpu: 1.200 mm, Perlengkapan: Pemeriksaan keselamatan UVV, Penandaan CE, geser samping, kabin, pencahayaan, riwayat servis lengkap, Still RX 60-25 Electric Forklift with the following specifications: · Operating hours: 1,686 · Lifting capacity: 2,500 kg · Lift height: 5,180 mm · Overall height: 2,380 mm · Year of manufacture: 2017 STILL 2.5 ton electric forklift with full cabin and heater, very good battery, non-marking tires, triplex mast with full free lift, side shifter, road-legal lighting in accordance with StVZO, fork length: 1,200 mm (other fork lengths available on request), battery charger included. Including 1,000-hour service according to STILL manufacturer specification and valid UVV safety inspection at the time of sale. Viewing, demonstration, and test drives are available by prior telephone appointment. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. This machine is also available for rental. Ask about our attractive spring rental offers! We can deliver your new forklift cost-effectively with our own ramp low-bed trailer (transport costs upon request). For more information and offers, please visit our website. Fsdpfxey Rh Evj Aaqjgb

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, jam operasional: 8.220 h, kapasitas angkut: 6.000 kg, tinggi angkat: 3.550 mm, jenis bahan bakar: diesel, tinggi konstruksi: 2.750 mm, daya: 85 kW (115,57 hp), produsen motor: DEUTZ, Tersertifikasi DGUV hingga: 05/2027, panjang garpu: 2.000 mm, Perlengkapan: Pemeriksaan keselamatan UVV, Penandaan CE, pencahayaan, riwayat servis lengkap, 1 Fjdpfx Aasyza A Isqjgb

Kondisi: baru, Wide belt sander for calibration and fine sanding Working width mm: 1,100 Min./Max. working height mm: 4/170 Abrasive belt width mm: 1,115 Abrasive belt length mm: 2,150 Gear motor kW: 2.2 Feed speed m/min: variable Infeed and outfeed support rollers for long and short workpieces Fedpoitvkusfx Aaqjgb Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10" touch screen control panel "eye-S" 1st unit: steel roller 2nd unit: rubber-coated calibration roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/ rubber-coated sanding roller 35SH Motor power 1st unit kW: 18.5 Motor power 2nd & 3rd unit kW: 18.5 Version "B" for RRCS with: pneumatic on/off for 1st unit pneumatic on/off for 2nd unit pneumatic on/off for 3rd unit “MESAR” elastic segmented sanding pad pneumatic on/off for sanding pad unit electronic adjustment of working height SPECIAL PRICE! IMMEDIATELY AVAILABLE!

Kondisi: bekas, nomor mesin/kendaraan: 008527, de-1 Fedpfjy Nx Ufjx Aaqegb

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 3.465 h, kapasitas angkut: 3.000 kg, tinggi angkat: 4.890 mm, pengangkatan bebas: 1.550 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.275 mm, panjang garpu: 1.200 mm, jenis penggerak: Elektro, Elektrik Forklift 4 Roda Tipe Mast: Triplex Transmisi: Otomatis Kondisi: Direkondisi ulang tanpa garansi Kondisi Teknis: sangat baik Fjdpfoyvl Huex Aaqjgb Jenis ban depan: Non Marking Kondisi ban depan: 80 - 100% Jenis ban belakang: Non Marking Kondisi ban belakang: 60 - 80% Baterai Volt: 80V Kapasitas Baterai: 620Ah Tahun pembuatan baterai: 2023 Deskripsi: Harga sudah termasuk pemeriksaan UVV baru, pengecatan sangat bagus (bekas unit sewa Still), baterai tahun 2023 direkondisi dengan Power Cycler termasuk tes Kappa 87% (lihat gambar terakhir), charger cocok dengan colokan, kami siap membantu pengiriman dengan biaya terjangkau. Sewa beli dimungkinkan! Side shifter, katup ke-3, katup ke-4, lampu kerja belakang, lampu kerja depan, pemanas, kabin penuh, full free lift, sertifikat CE, lampu keselamatan.

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS DENGAN KOLUM BERGERAK PERGERAKAN LONGITUDINAL: 6000 mm PERGERAKAN TRANSVERSAL: 1500 mm PERGERAKAN VERTIKAL: 2500 mm GERAK CEPAT L-T-V: 35 m/menit SPINDEL: 337-5000 rpm; 42 kW; 1180 Nm MEJA KERJA: 300 x 2500 x 7000 mm KEPALA: ISO 50 ; POSISI MILLESIMAL ; SUMBU A/B OTOMATIS MAGAZIN ALAT: PICK-UP; 12 POSISI UNIT KONTROL: HEIDENHAIN TNC 640 PENDINGIN TEKANAN TINGGI: 20 Bar CATATAN: PERGANTIAN KEPALA OTOMATIS; UDARA BERTEKANAN DI DALAM ALAT; RTCP; PERANGKAT LUNAK AUTOCAL UNTUK KALIBRASI OTOMATIS Fgjdpfxox Ru Azo Aaqeb

Kondisi: siap digunakan (bekas), Deutronic DX 3000 / 3-CAN-60-DIV catu daya built-in Kondisi: 1 Nomor seri: 92037202009 / Input: 400-500 V~ / 45-65Hz Output: 0-60 VDC 0-50 A, bekas, kondisi terawat dengan baik, 100% berfungsi, dikirim sesuai foto Fodpfx Aaey Rckteqsgb

Kondisi: siap digunakan (bekas), Deutronic DX 3000 / 3-CAN-60-DIV catu daya built-in Kondisi: 1 Nomor seri: 9122080016 / Input: 400-500 V~ / 45-65Hz Output: 0-60 VDC 0-50 A, bekas, kondisi terawat baik, 100% berfungsi, lingkup pengiriman sesuai foto. Fgjdpfxey Rckmo Aaqjb

Kondisi: baik (bekas), live centre, revolving centre, live Morse taper, live centre point, live lathe centre, centre cone - Live centre point: shaft-mounted - Taper: MT3 - Dimensions: Ø 60 x 155 mm - Weight: 1.2 kg Fedpfxsm U A Exs Aaqogb

Kondisi: bekas, CNC vertical machining center FEHLMANN type PICOMAX 60 CNC control HEIDENHAIN TNC 426 Serial No. 14599641 Year of manufacture: 1999 Travel ranges X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate 1 - 20,000 mm/min Rapid traverse 20 m/min Feed force: 12,000 N Clamping surface of the table 920 x 380 mm T-slots 7 pcs, 12-H8 mm Max. table load 250 kg Table height 1,004 mm Distance spindle nose - table 94 - 704 mm Spindle overhang - column 405 mm Spindle speed 50 - 18,000 rpm, stepless Spindle drive 10.2 kW (60% duty cycle) Max. torque 70 Nm (up to 1,240 rpm) Spindle taper SK 30 / DIN 69871A Pull stud DIN 69872 Drilling capacity in steel 25 mm Milling capacity in steel / aluminium 100 / 700 cm³/min Tapping capacity in steel / aluminium M20 / M24 Tool changer 24 positions Fgjdpsy N Du Defx Aaqob Tool change time approx. 6 sec. Chip-to-chip time approx. 8 sec. Control Heidenhain TNC 426 Power supply 400 Volt, 50 Hz Connected load 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system 200 liters, external - Spindle cooling unit, external - Central lubrication Vogel - Pneumatic supply 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on 97,000 h - Machine on 80,000 h - Program run 42,000 h Space required L x W x H 2,000 x 1,700 x 3,000 mm Weight approx. 3.2 tons Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, daya nominal (semu): 57 kVA, berat keseluruhan: 9.850 kg, kecepatan spindel (maks.): 18.000 rpm, tegangan masuk: 400 V, Dijual: DMG MORI DMU 60 eVo CNC 5-Axis Universal Machining Center — 2015 Pusat pemesinan universal CNC 5-sumbu buatan Jerman, DMG MORI DMU 60 eVo, cocok untuk operasi milling dengan tingkat presisi tinggi dan kompleksitas tinggi. Mesin ini menawarkan kekakuan, presisi, dan produktivitas yang luar biasa untuk aplikasi pembuatan cetakan, teknik presisi, otomotif, dirgantara, serta pengerjaan umum. Spesifikasi Utama: Pabrikan: DMG MORI / DECKEL MAHO Seebach GmbH Model: DMU 60 eVo Tahun: 2015 Asal: Jerman Kecepatan Spindle: 18.000 rpm Berat: 9.850 kg Daya: 57 kVA Tegangan: 400 V / 50 Hz Fgsdpfoy Rd Rnex Aaqsb Sertifikat CE Tersedia untuk inspeksi. Foto, video, dan detail teknis lebih lanjut dapat dibagikan atas permintaan.

Kondisi: bekas, Tahun pembuatan: 2017, lebar pemotongan maks.: 4200 mm ketinggian pemotongan maks.: 2200 mm diameter mata gergaji: 250 mm ketebalan pemrosesan maks.: 60 mm lubang mata gergaji: 30 mm sandaran bawah: bantalan plastik Fgsdsxg Igiepfx Aaqeb meja penyangga material: palang plastik, dapat ditarik sistem pengukuran: skala kemiringan kepala gergaji: manual umpan gergaji: manual penempatan: berdiri bebas penyedotan debu: eksternal penguncian balok gergaji: manual berat kira-kira: 1000 kg dimensi: 5600 x 1700 x 3000 mm daya motor: 4,2 kW Lokasi penyimpanan: Nattheim