Beli Almig Alm-Rd56 bekas (726)

Kondisi: bekas, nomor mesin/kendaraan: 1379A, jarak tempuh: 1.638 km, daya: 179 kW (243,37 hp), pendaftaran pertama: 11/1986, jenis bahan bakar: diesel, berat keseluruhan: 15.322 kg, konfigurasi gandar: 3 gandar, warna: hijau, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, kompresor, kopling trailer, pemanas parkir, penggerak semua roda, TÜV will be renewed! Special-purpose vehicle registration (So-KFZ Zulassung). The AM General is in excellent condition, sourced directly from the Army, well maintained and cared for. The bodywork is in superb condition (vehicle from reserve stock). The M944A1 is equipped with: all-wheel drive, 5-speed automatic transmission, transfer case with high and low range, power steering (very smooth), air brake system with ABS, 3 front seats. The body has internal dimensions (L/W/H) of 5550 / 2220 / 1910mm. Body equipment includes: lathe, tool cabinets with drawers, bench grinder, welding unit, permanently installed 110V 31kVA generator powered by vehicle engine (Cummins, only 105 operating hours) via PTO, 2-cylinder compressor with air tank, air connections in the body, overhead monorail, charger, large and small impact wrenches, angle grinder, magnetic drill, bench vice, large stationary heater and ventilation, many power sockets, interior lighting. The body can be opened on both sides and at the rear. Mileage is stated in miles. Truck driving license class 2 required (LKW). Tire size 14.00R20, tubeless (very good condition). Maximum speed: 90 km/h. Engine displacement: 14,011 cm³. 24-volt electrical system. Upon delivery, the M944A1 will not only have a new TÜV inspection but is also reliably roadworthy :-) May be insured affordably as a classic vehicle (youngtimer). This AM General is also already suitable for conversion to a motorhome or expedition vehicle. All my vehicles are listed on my homepage. – You rush around from Flensburg to Berchtesgaden to look at all the different vehicles, but here you’ll find over 150 vehicles including: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, Mercedes, etc. – all available with TÜV. – Plus, there is an incredible range of spare parts and accessories. – Why settle for less? – Give me a call at 0049 (0)2248. Best regards, your Philipp from Hanfbachtal. Ijdpfx Ahsqx Sxasysbc

Kondisi: bekas, nomor mesin/kendaraan: 1380A, jarak tempuh: 20.481 km, daya: 179 kW (243,37 hp), pendaftaran pertama: 07/1984, jenis bahan bakar: diesel, berat keseluruhan: 16.388 kg, konfigurasi gandar: 3 gandar, warna: hijau, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, derek, kompresor, kopling trailer, penggerak semua roda, TÜV will be renewed! Special vehicle registration (So-KFZ). The AM General is in good condition, sourced directly from the Army, well-maintained and serviced. The bodywork is in good shape (vehicle comes from reserve stock), however, the paintwork is poor and partially flaked off. The M936W/W is equipped with: all-wheel drive, 5-speed automatic transmission, transfer case with road and off-road settings, power steering (very smooth), air brakes with ABS, three front seats. The superstructure is a 5-ton telescopic crane with extension. Vehicle features: front recovery winch, heavy-duty rear recovery winch with 12,474 kg pulling capacity, stabilizer legs (can be set at the front, rear, and sides), 4-point stabilizers extendable to the sides, plus various additional accessories. The indicated mileage is in miles. Truck driving license required (class 2). Tire size is 11.00R20 (very good condition). Maximum speed: 90 km/h. Engine displacement: 14,011 cm³. 24V electrical system. The M936 will be delivered with a new TÜV certificate and is reliably operational :-). Can also be insured at a reduced rate as a youngtimer. The AM General handles exceptionally well and is a joy to drive. Iodpfjqx S Adsx Ahyjbc ATTENTION! The dealer price is for the vehicle as it stands—without TÜV, and so on. All my vehicles can be seen on my website. Now you’re running from Flensburg to Berchtesgaden to look at various trucks, but here you'll find over 150 vehicles of types such as: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Modell, Mowag, DB, etc.—and many with TÜV. Plus, an unbelievable number of spare parts and accessories. Why settle for less? Give me a call: 0049 (0)2248 Best regards, Philipp from Hanfbachtal

Kondisi: baru, Technical data for the tiered trolley: Manufacturer: LPR Type: 600 01x Tiered trolley, new Frame colour: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Each unit consists of: 02x Workbench uprights, new Frame colour: blue Upright profile: 50 x 50 mm Upright height: 2,000 mm Upright depth: 600 mm Including cross and diagonal braces, Metal base plates, plastic end caps The uprights are pre-assembled (bolted truss construction) 06x Workbench beams, new Frame colour: orange Design: stepped beam Beam profile: 80 x 50 mm Clear span: 1,450 mm Load capacity: 300 kg with evenly distributed load 12x Safety pins, new Version: fully galvanised For securing the longitudinal beams against unintentional lifting 03x Chipboard or MDF boards, 2nd choice Thickness: 22 mm Width: 1,430 mm Depth: 545 mm 02x Swivel castors with double brake, new Wheel size: 125 x 37 mm Mounting plate: 105 x 80 mm Galvanised steel rim with hub and thread guard Ibjdpfxsqzg T Us Ahyec 02x Swivel castors, new Wheel size: 125 x 37 mm Mounting plate: 105 x 80 mm Galvanised steel rim with hub and thread guard 08x Machine bolts: M 8 x 20 mm 08x Nuts: M 8 08x Washers: 8 mm - Workbenches are shipped unassembled; - Workbench uprights are pre-assembled; - Usual production lead time approx. 3 - 5 working days.

Kondisi: baru, Tahun pembuatan: 2025, Dura-Zaun-Metall-Automatische-Profiliermaschine MPF-1 auto Die Dura-Zaun-Metall-Automatische-Profiliermaschine MPF-1 auto ist eine effiziente Lösung für Unternehmen, die ihre Produktion von Metalllatten für Durazaun-Profile steigern oder neu starten möchten. Ein Metalllattenzaun ist ein Profiltyp, der durch das automatische Umformen von flachem Blech mit Hilfe von Walzen hergestellt wird und anschließend zur Herstellung und Montage von Metallzäunen verwendet wird. Ein Durazaun (auch Euro-Lattenzaun genannt) überzeugt durch ein attraktives Erscheinungsbild und lässt sich harmonisch in jedes Design integrieren, ohne es zu überladen oder mit unnötigen Elementen zu versehen. Der Durazaun ist eine ideale Lösung für den Bau von Wohnhäusern, Ferienhäusern oder anderen Gebäuden. Die Dura-Zaun-Profilierlinie MPF-1 ist vollautomatisch und ermöglicht die Produktion von Metallzaunlatten im komplett automatischen Betrieb. Ijdpfx Astp H Erehyobc Die Linie besteht aus folgenden Komponenten: Automatischer Blech-Abwickler, geeignet für Coils mit einem Gewicht bis zu 1,5 Tonnen und einer Breite bis zu 350 mm. Der Abwickler dient dazu, das Blech der Profilieranlage zuzuführen. Dafür wird die Coil auf die Abwickelwelle montiert, der Kerndurchmesser angepasst und das Blech unter den Ausgleichsmechanismus der Maschine gelegt. Anschließend wird es der Profiliermaschine zugeführt. Optional kann die Linie mit einem manuellen Abwickler ausgestattet werden oder ganz ohne Abwickler betrieben werden. Die Profilieranlage selbst besteht aus Walzen unterschiedlicher Durchmesser und Konfigurationen, um das Blech zu verformen und das gewünschte Profil herzustellen. Automatische Guillotine-Schere zum präzisen Zuschneiden der fertigen Zaunlatten. Die Schere arbeitet automatisch und ermöglicht das Schneiden der Zaunprofile in gewünschter Länge und Stückzahl. Das Automatisierungssystem umfasst ein manuelles Bedienfeld, ein automatisches Bedienfeld und einen Bedienstand mit Display. Das manuelle Bedienfeld wird zur Einrichtung und zur Kontrolle der Maschine im Handbetrieb verwendet. Im Automatikbetrieb können am automatischen Bedienfeld die gewünschte Länge und Stückzahl der Profilprodukte eingestellt und die Schnittprogramme hinterlegt werden. So erhalten Sie mit der Dura-Zaun-Produktionslinie MPF-1 auto eine vollautomatische Lösung zur Herstellung von Metallzaunprofilen – bei geringem Personalaufwand und hoher Produktqualität in den individuell benötigten Maßen und Mengen. Technische Daten: Materialdicke max. (mm): 0,55 Motorleistung (kW): 1,5+1,1+2,2 Walzgeschwindigkeit (m/min): 10-15

Kondisi: bekas, E25TTZ, PSG Germany GmbH diaphragm pump, Almatec Iodpfeq S Udisx Ahyebc Model: E25TTZ Condition: Used

Kondisi: bekas, cetisPV-GR / cetisPV GR / cetisPVGR, h.a.l.m. elektronik GmbH grid resistor Iedpfxeq S Udus Ahyjbc Model: cetisPV-GR Condition: Used

Kondisi: bekas, Safety switch, protective gate switch, limit switch, push button, circuit breaker, position switch, magnetic interlock switch, safety interlock - Manufacturer: Schmersal, safety interlock from CNC milling machine Mikron UME 600 - Type: AZM 161SK-33rka-024 IEC 60947-5-1 Ibsdpfercnm Njx Ahyoc - Serial No.: see photo of nameplate - Transport dimensions: 270/260/H60 mm - Weight: 1.5 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 28727, Maximaler Durchmesser: 6 mm Maximale Länge unter dem Kopf: 30 mm Geschwindigkeit: 400 Stück pro Minute Isdpfx Ahjthgkqeyjbc

Kondisi: baik (bekas), 74 m Rak Palet Meta Iedpfeh R I S Hsx Ahyebc Barang bekas, kondisi sangat baik, lihat gambar Tinggi 5,5 m Kedalaman 110 cm Panjang penyangga 3,6 m Kapasitas beban/tingkat 3000 kg Rangka dilapisi seng Penyangga berwarna merah Harga yang dapat dinegosiasikan: € 6.190,-- belum termasuk pajak, pengambilan di gudang Penawaran terdiri dari: + 21 buah rangka, sudah dirakit, kedalaman 110 cm, tinggi 5,5 m + 120 buah penyangga, panjang 3,6 m, kapasitas beban 3000 kg/tingkat + 240 buah pengaman pengunci + 42 buah jangkar beton Barang tersedia di gudang. Pengangkutan dan pemasangan dapat dilakukan sesuai permintaan. Pemeriksaan dapat dilakukan kapan saja dengan perjanjian. Informasi lebih lanjut tersedia sesuai permintaan. Selalu tersedia lebih dari 5000 m rak palet dari berbagai produsen. (Perubahan dan kesalahan dalam data teknis, spesifikasi, dan harga serta kemungkinan penjualan antara waktu dicadangkan! Lihat Ketentuan Umum kami, semua harga belum termasuk PPN, pengambilan di gudang) Lenox Trading – Teknologi Pergudangan & Rak Berat Unggulan, bekas & baru Teks deskripsi: Apakah Anda mencari rak penyimpanan berkualitas tinggi untuk dibeli? Dengan sekitar 100 karyawan, Lenox Trading adalah salah satu pedagang terbesar untuk teknologi penyimpanan baru dan bekas di seluruh wilayah DACH (Austria, Jerman, Swiss). ⚡ TERSEDIA SEGERA: • Lebih dari 10.000 meter rak yang tersedia untuk pengiriman segera • 20.000 m² platform penyimpanan & platform konstruksi baja tersedia segera • 30–50 truk trailer dengan barang setiap minggu untuk pilihan maksimal 📦 RANGKAIAN PRODUK KAMI (BELI SECARA ONLINE DENGAN HARGA TERBAIK): Baik itu rak palet, rak berat, rak tinggi, rak rak, rak ban, atau rak untuk wadah IBC – kami menyediakan dan memasang di seluruh Eropa dengan TIM KAMI SENDIRI! Termasuk perencanaan CAD, pengangkutan, pembongkaran, dan pemasangan. 🏭 MEREK TERBAIK BEKAS & DARI LIKUIDASI/PENJUALAN PAKSA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tipe MPB, Tipe E, Rak Berat Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Rak lengan cantilever (Rak lengan cantilever Elvedi, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 BISNIS KAMI YANG LAIN: LELANG ONLINE & LIKUIDASI Untuk pembongkaran dan pembersihan, kami menawarkan paket layanan lengkap: 1. Pembelian tetap: Pembelian barang dagangan, peralatan & seluruh persediaan gudang termasuk pembersihan. 2. Lelang komisi: Melakukan lelang atas nama klien. Layanan lengkap kami oleh karyawan kami sendiri: Katalogisasi, persiapan kantor, inspeksi, pengeluaran barang, logistik, pembongkaran, dan penyerahan dalam kondisi bersih. Baik Anda mengetahui kami melalui rak berat atau mencari rak berat berlapis seng / sistem rak berat – kami menjamin kondisi terbaik. Hubungi kami untuk penawaran tanpa kewajiban!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, gaya penekanan: 400 t, HIDRALMAC Four-Column Hydraulic Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Drawing Cushion For sale is a hydraulic four-column press (deep drawing press) manufactured by HIDRALMAC, offering pressing force up to 400 t. This machine is specifically designed for demanding deep drawing and forming applications, featuring a powerful drawing cushion along with advanced control and safety technology. Due to its robust construction and comprehensive equipment, it is an ideal solution for industrial series production and complex forming tasks. ==== Technical Data & Details: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine type: Deep Drawing Press - Design: Four-column press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Daylight width: 2,500 mm - Installation height: 1,300 mm Ibsdpfjin Et Nox Ahyec - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Slide - Table size: 2,500 × 1,600 mm - Slide size: 3,100 × 1,600 mm - Column diameter: 220 mm - Return force: 40 t - T-slots: according to DIN 650-22 (customizable) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Drawing Unit - Drawing cushion: 1,400 × 800 mm - Drawing cushion force: 30–60 t - Drawing cushion stroke: 250 mm - Drawing cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW - Oil tank: 1,500 l - Oil volume: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure build-up: up to 400 t within max. 4 seconds - Pressure control: adjustable via monitor ==== Controls & Operation - Control system: Siemens - Monitor: Siemens 12" - Modes of operation: manual, semi-automatic, fully automatic - Travel control adjustable via monitor - Remote monitoring/maintenance - Two-hand operation on movable stand - Wall-mounted electrical cabinet ==== Safety & Equipment - Safety PLC for hydraulic block monitoring - Front and rear light sensors: SICK (1,300 mm) - Side safety doors left and right (1,000 × 800 mm each) - Interior LED lighting - Energy monitoring system (idle load reduction to approx. 2 kW) ==== Construction - Sturdy welded steel structure - Machine steel: ASTM A36 - Induction-hardened and chrome-plated piston rods - Low maintenance and reliable - CE certificate - Documentation in German ==== Deep Drawing, Forming Technology, Series Production, Sheet Metal Forming, Toolmaking Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Looking for a hydraulic press customized to your application? Contact us for a tailored offer. Our core strength is special purpose machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we use mainly components from leading European manufacturers.

Kondisi: bekas, jarak tempuh: 7.206 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 08/2024, jenis bahan bakar: diesel, berat keseluruhan: 32.000 kg, konfigurasi gandar: 3 gardan, inspeksi berikutnya (TÜV): 09/2026, tipe perpindahan gigi: semi-otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jenis bahan bakar: listrik, kalmar-ecf-70-6-de Iedpfxeh Awlxs Ahyjbc

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, We supply the machines wherever you wish and can install them in consultation if required. Optional: Stainless steel discharge unit, stainless steel storage silo, blower, pipes approx. 3 meters. Grinding mill 1000 series 45 kW, 3 x 10 knife set or, as per your preference, 5 x 2 rotor configuration (pictured: heavy-duty rotor set and standard 3x2 set) 2 x stators Screen deck as requested Product discharge and storage available in various combinations at particularly favorable prices Motor power can be adapted. Other modifications negotiable, such as a rotor modification for more knives, e.g., 5 knife rows or heavy-duty edition Delivery by arrangement. Call or email us for consultation or if you have questions; please respond with your name, company name, and correct telephone number. Without these accurate details, RSS Recycling Shredders and Solutions cannot respond. Isdpfx Ahog Ainqsyebc

Kondisi: baru, We offer a new pallet rack beam for sale. Thanks to its hot-dip galvanized surface, this beam is suitable for outdoor use. Technical data for the pallet rack beam: Racking system: Lücht & Palm Type: MB Scope of delivery includes: 01x pallet rack beam, new Material finish: hot-dip galvanized IPE profile: 120 x 60 mm Design: header beam Connector: 2 HK (hooks) Clear span: 1,800 mm Ijdpfx Aehg Tkkohyjbc Maximum load per pair of beams: 3,600 kg, with evenly distributed load 1x set HV assembly kit EN14399-4 - EN14399-6 10.9 hex bolt with nut and washers for HV connection Material finish: hot-dip galvanized These beams are equipped with an upstand welded on for the storage of mesh shelves. (Height: 40 mm / Material thickness: 4 mm)

Tahun pembuatan: 2025, Kondisi: baru, Valmec 600 Brushing-Aging Machine - Working width: 600 mm - Feed speed: 4–12 m/min - Motor power: 2 x 4 kW Ibsdegk T Etepfx Ahyoc - Equipped with two brushes: one wire brush and one Tynex brush - Independent brush height adjustment - Power supply: 400 V - Machine is brand new

Kondisi: baru, Tahun pembuatan: 2025, Valmec Master 400 Aging Brush Machine - Working width: 400 mm - Maximum working height: 300 mm - Motors: 2 x 3 kW - Conveyor belt with inverter speed control - Supplied with steel brush and Tynex brush - Extraction outlets: 2 x 100 mm - Independent height adjustment of brush units Iodpsgmm Sasfx Ahyebc - Dimensions: 1300 x 900 x 1600(h) mm - Machine weight: 500 kg

Kondisi: bekas, nomor mesin/kendaraan: 14547, Tahun pembuatan: 2010, jam operasional: 17.208 h, kapasitas angkut: 12.000 kg, tinggi angkat: 5.500 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 4.280 mm, Perlengkapan: kabin, 14547 Machine Details: Year of manufacture: 2010 Load capacity: 12,000 kg Lift height: 5,500 mm Recorded operating hours: 17,208 h Mast type: Standard Mast height: 4,280 mm Length/Width/Height: 4,500 / 2,500 / 3,000 mm Operating weight: 15,950 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Front working lights * Rear working lights * Twin tires Isdpfxjtx Urwe Ahyjbc ---- Additional machine information: Without fork carriage---- As a rule, the operating hours indicated are the hours shown on the meter. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments and sweepers available immediately. Of course, also for rent! We will gladly purchase your USED machine. Have questions? You can reach us during our business hours from 7:30 AM to 4:00 PM. We look forward to hearing from you! We speak English. Interim sale and errors for this offer expressly reserved. In business-to-business transactions, the machine is sold as is, not refurbished. All information subject to change and errors excepted.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 28727, DOUBLE-STROKE HEADER NATIONAL 61MS Fully operational. Overhauled in 2024, both mechanical and electrical parts. Available for any test at HBR srl. Number of dies: 1 Number of punches: 2 Production rate: 400 pieces per minute Cutoff diameter: 6 mm Cutoff length (min./max.): 10/52 mm Kickout stroke – die (min./max.): 4.8/30 mm Kickout stroke – punch (max.): 9.5 mm Iedpfx Ahet Rp A Hsysbc Upset diameter: 14 mm Quill diameter: 19 mm Cutter insert diameter: 12 mm Die diameter: 41 mm Cone punch diameter: 32 mm Finish punch diameter: 35 mm Main motor power: 15 kW Floor space (width): 1,340 mm Floor space (length): 2,680 mm Height: 1,970 mm Net weight: 4,700 kg Gross weight: 5,400 kg

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, de-to-hu Isdpfx Astqmmdshyebc

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), 2 ALMAC screw conveyors for storage/crushing of curd and cheese curd Order number: 4177 External dimensions: 3,926 mm length 1,320 mm width 2,784 mm height Year of manufacture: 2014 Motor: 2.6 kW, 400 V, 50 Hz, 24 VDC Iodpjp Dutksfx Ahyebc including installation manual Weight: approx. 2.2 t Delivery: FCA Bremen warehouse, Incoterms 2020

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 160 t, HIDRALMAC Four-Column Press – 160 t – 1,200 × 800 mm – Tryout Press For sale is a hydraulic four-column press (tryout press) from HIDRALMAC with a pressing force of 160 t. This machine is ideal for tool testing, die fitting, and small batch production. Its compact design, precise controllability, and robust construction provide a reliable solution for workshop and production environments. ==== Technical Data + Information: Hydraulic Four-Column Press – Tryout Press – 160 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Tryout Press - Design: Four-Column Press - Pressing Force: 160 t - Machine Weight: approx. 7 t - Total Power Requirement: 7.5 kW - Main Cylinder: 1 piece ==== Working Area - Installation Height: 800 mm - Stroke: 600 mm - Table Height: 850 mm - Lateral Column Spacing: 400 mm ==== Table & Load - Table Surface: 1,200 × 800 mm - Max. Table Load: 5 t - Return Force: 16 t ==== Speeds - Approach Speed: 1–9.8 mm/sec - Return Speed: 1–9.8 mm/sec ==== Hydraulics & Operation - Oil Volume: approx. 220 l (AW 46) - Robust and low-maintenance hydraulic design ==== Construction & Features - Column Diameter: 160 mm - Compact design for flexible use Iodjfxyi Ijpfx Ahysbc - Suitable for die fitting and tryout work ===== Die fitting, tryout work, small batch production, toolmaking, forming technology Hydraulic press, hydraulic press, tryout press, four-column press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety directive NR 12, which is based on these standards. Our greatest strength is special-purpose machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are mainly equipped with components from leading European manufacturers.

Tahun pembuatan: 2026, Kondisi: baru, de-pt1000-bandpresse-beschreibung Isdpfx Ahofglxxoyjbc

Tahun pembuatan: 2021, Kondisi: seperti baru (mesin pameran), Rental Machine A HOSOKAWA ALPINE Originals Machine Completely overhauled by the original manufacturer Isdjf H Azgepfx Ahyjbc Exclusively with original parts Manufacturer warranty Guaranteed spare parts supply Short delivery time Before delivery, the machine is overhauled and adapted to customer specifications We are also happy to assist you with the procurement of plant accessories and integration of the machine into your existing production The Alpine Ultraplex UPZ is a universal impact mill that can be equipped with a variety of easily interchangeable grinding tools to achieve different results, such as pin, beater disc, or pendulum beater configurations. Certain grinding tools can work in combination with various grinding tracks, screens, or a combination of both to achieve the desired fineness. This flexibility allows the same machine to process a wide range of products such as fibrous roots or spices, plastics, as well as chemical or mineral products. Materials up to approximately 3 Mohs can be processed with the UPZ. The 100 UPZ is the perfect mill for laboratory use, research and development of new materials, or for small-scale production. Thanks to the simple door opening mechanism, which does not require disassembly of other plant components or the use of tools, grinding tools can be exchanged or serviced very quickly. It is equipped with a safety device that prevents the machine from being opened during operation. Motor Power: 1.5 kW Material: Stainless steel

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, jam operasional: 6.263 h, kapasitas angkut: 12.000 kg, tinggi angkat: 5.000 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 3.800 mm, panjang garpu: 2.400 mm, jenis penggerak: Diesel, Diesel forklift Load center: 600 Mast type: Duplex Technical condition: good Sideshift, fork positioner, Ibjdpfeu Ac I Ujx Ahysc

Kondisi: bekas, TECHNICAL DATA - Operating hours: 34,373 - Strokes X x Y x Z: 220 x 120 x 170 [mm] - Fixed table dimensions: 350 x 140 [mm] Ibedpfsuhbq Nox Ahysc - Feed rate: 0 - 5,000 [mm/min.] - Spindle speed: 20,000 [rpm] - Spindle diameter: 60 [mm] - Tool holder type: ISO 25 - Tool changer: RANDOM, 20 positions - Spindle motor: 1.5/3.4 [kW] - Installed power: 6 [kW] - Dimensions: 1,830 x 1,250 x 1,750 [mm] - Weight: 1,500 [kg] ACCESSORIES - CNC control: FANUC 16i - Rigid internal thread cutting - Spindle cooling - Oil mist extraction - Linear scale measurement on all 3 axes (1/10 [μm]) - Blum tool measurement system - Humard automation for workpieces - 3R workpiece palletizing system - Coolant tank with pump