Beli Artiglio Sd 80 bekas (18.728)

Kondisi: sangat baik (bekas), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance. Application areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and cyclical temperature testing Technical data: Pgodpfx Aljy Hkfds Ijk - Type: TSS-70/130 - Test volume: 130 liters - Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C - Heating rate: approx. 6 K/min from ambient to +180°C - Cooling rate: approx. 4 K/min from ambient to -60°C - Temperature deviation: ±1 K over time ±2 K spatially - Rate of temperature change: max. 100 K/min on average for thermal shock testing without radiant heat - Transfer time between chambers: ≤ 15 min in the range from -65°C to +200°C with 10 kg ICs - Switching time: < 10 seconds Electrical data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 16.7 kW - Rated current: approx. 26.8 A - Site-side fuse: 32 A (slow blow) - Connector: Cekon 32 Refrigeration system: - Refrigerants: R404A / R23 - Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control panel - Microprocessor controlled regulation and monitoring system - Programmable operation - Up to 100 test programs possible - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test specimen control - Failure warning via potential-free contact - Load up to 30 V-DC, 2 A - EMC tested Technical design: - Hot and cold chambers - Trolley with spindle drive - Test compartment / trolley made of stainless steel, material no. 1.4301 - Removable basket made of stainless steel wire - Pipe sleeve NW 50 with closure plug - Compressed air connection 1/4" male thread - Condensate drain (non-pressurized) R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: - External dimensions approx.: 2335 x 940 x 1820 mm - Delivery opening approx.: 1990 x 940 x 1652 mm - Test space dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm - Window: 300 x 300 mm Additional data: - Protection class: IP 22 - Noise level: < 60 dB(A) - Weight: approx. 950 kg - Average consumption per test cycle: approx. 8 kWh For your safety as a buyer, please note: The following points are carried out in advance for all chambers we offer: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerants if required 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change or errors!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a premium thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Applications: - Material testing - Aging tests - Electronic and component testing - Thermal shock and temperature cycling tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature constancy: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock tests Without radiant heat Transfer rate: ≤ 15 min in range from -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Site-side protection: 32 A slow-blow Connection: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for customer test item activation - Fault indication via potential-free contact (Load up to 30 VDC, 2 A) - EMC tested Technical design: - Hot and cold chamber - Drawer carriage with spindle drive - Test space / basket made of stainless steel, material no. 1.4301 - Insert basket made of stainless steel wire - Tube feedthrough NW 50 with sealing plug - Compressed air connection 1/4" external thread - Gravity condensate drain, R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation sketch: External dimensions approx.: 2335 x 940 x 1820 mm Installation dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm; Width approx. 480 mm; Depth approx. 660 mm Window: 300 x 300 mm Further data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Pgsdpfx Aley Hkd Hs Isk Average consumption per test cycle: approx. 8 kWh For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data reserved!) Further questions? We are happy to answer them by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Bürkle Press Veneer S 80, tahun pembuatan sekitar 1982, dimensi eksternal: 3080 x 1550 x 1800 mm, berat 4500 kg, tekanan press 80 t, 6 silinder, luas bidang press 2500 x 1300 mm, plat pemanas sudah diperiksa, penggerak hidrolik, konstruksi kokoh, kondisi baik, berfungsi penuh Harga di lokasi Pengiriman tersedia dengan biaya tambahan! Pgedpfeyvhkvsx Al Isk

Kondisi: baik (bekas), Tahun pembuatan: 1968, Fungsionalitas: berfungsi sepenuhnya, Ukuran tekan: 2550 × 1350 mm Tekanan tekan: 80 t Bukaan: sekitar 400 mm Pemanas: listrik, sekitar 10–24 kW Koneksi: 380 V Berat: sekitar 4 t Tipe konstruksi: elektrohidrolik, 4 silinder Konstruksi kokoh Ideal untuk pekerjaan veneer dan pengeleman panel Pelat anodisasi emas Podsyu Sifopfx Al Ijgk Dari lokasi Mesin dalam kondisi baik dan terawat sesuai usianya. Kualitas industri yang kokoh – tahan lama dan andal. Pengiriman tersedia dengan biaya tambahan!

Kondisi: bekas, berat kosong: 7.360 kg, berat muatan maksimum: 25.640 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2017, suspensi: udara, ukuran ban: 385/65 R22.5, Perlengkapan: ABS,

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), - BEKAS - MESIN TEKAN CNC 4-SUMBU SINKRONISASI SUMBU: Y1 - Y2 - X - R PANJANG TEKAN: 3130 mm KAPASITAS TEKAN: 80 ton KEDALAMAN LEHER: 405 mm JARAK ANTAR TIANG: 2700 mm TINGGI TERBUKA: 350 mm Pgsdpfxomyc I Ns Al Isk JALAN BALOK ATAS: 150 mm KECEPATAN PENDEKATAN: 100 mm/detik KECEPATAN KEMBALI: 96 mm/detik KECEPATAN KERJA: 9 mm/detik DAYA MOTOR: 5,5 kW UNIT KONTROL: TASK 84 SIRIO 2 BERAT: 6500 kg DIMENSI KESELURUHAN: 4000 x 1700 x 2400 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1991, jam operasional: 11.154 h, kapasitas angkut: 8.000 kg, tinggi angkat: 4.000 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 3.120 mm, lebar kerangka garpu: 2.150 mm, panjang garpu: 2.400 mm, berat kosong: 11.520 kg, panjang total: 3.700 mm, jenis penggerak: Diesel, lebar konstruksi: 2.240 mm, Diesel forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 90 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Super elastic Front tire size: 8.25-15 Rear tire type: Super elastic Rear tire size: 8.25-15 Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk locations. Visit our website – sago-online. Lease purchase & financing under favorable conditions are always possible. We are also happy to purchase your used vehicle outright, even if you do not buy one from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this R70-80. P.S.: Our certified forklift workshop specializes in repair, maintenance, overhaul, and custom modification for forklifts from 8 tons. We are also happy to offer your vehicle for consignment sale in our showroom. Side shifter, Heater, Full cabin, Pgedpsy E Uv Rjfx Al Ijk

Kondisi: bekas, Tahun pembuatan: 2019, kapasitas angkut: 8.000 kg, tinggi angkat: 4.060 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 - Minimum pivot point distance (mm): 877 Pgsdpfx Asy E Ui Del Iek - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A))

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 8.000 kg, tinggi angkat: 6.570 mm, panjang garpu: 1.800 mm, panjang total: 6.150 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 - Minimum pivot point distance (mm): 877 - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 Pgedpfoy E Uiqjx Al Ijk - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A))

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 8.000 kg, tinggi angkat: 4.500 mm, panjang total: 5.600 mm, elektrostapler-1 Pgodpsy E Uh Hjfx Al Ijk

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 8.000 kg, tinggi angkat: 6.620 mm, panjang total: 5.910 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm Pgedpfx Aljy E Uffe Iok - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 - Minimum pivot point distance (mm): 877 - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A))

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 8.000 kg, tinggi angkat: 3.120 mm, panjang total: 5.450 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 - Minimum pivot point distance (mm): 877 Pjdsy E Ud Ujpfx Al Iogk - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A))

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 8.000 kg, tinggi angkat: 4.500 mm, panjang garpu: 1.800 mm, panjang total: 5.360 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 - Minimum pivot point distance (mm): 877 - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A)) Psdpfx Asy E Udzsl Iegk

Kondisi: bekas, Tahun pembuatan: 2016, kapasitas angkut: 8.000 kg, tinggi angkat: 3.130 mm, panjang total: 4.940 mm, Electric forklift Linde E 80-01/900 Drive: Electric Pgjdoxd E Acepfx Al Isk Year of manufacture: 2016 Lifting height (mm): 3,130 Load capacity (kg): 8,000

Kondisi: bekas, berat kosong: 7.360 kg, berat muatan maksimum: 25.640 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2017, suspensi: udara, ukuran ban: 385/65 R22.5, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.360 kg, berat muatan maksimum: 25.640 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2017, suspensi: udara, ukuran ban: 385/65 R22.5, Perlengkapan: ABS,

Tahun pembuatan: 1981, Kondisi: diremaj di bengkel (bekas), - Hersteller - MORONI - Modell - SPND 80 - Drahtdurchmesserbereich - 1,8 - 3,5 mm - Nagellänge - 10 - 80 mm - Leistung - 4 kW Pgjdjhbr T Topfx Al Isk - Geschwindigkeit - 440 Nägel/min Maschine generalüberholt

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 74.800 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: Heidenhain, model controller: iTNC 430, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 28.000 h, pasokan pendingin: 40 batang, Perlengkapan: konveyor serpihan, IKZ (Pendingin internal) Meja Bundar NC (sumbu C) Kepala Putar NC Psdpfx Asy Ep Rtol Ijgk Mounting alat: HSK 63 Fungsi FD Penukar palet Sistem pengukuran: probe pengukuran inframerah untuk pengukuran benda kerja Majalah tambahan 120 slot Spindel sudah diganti

Kondisi: baru, 8 sanding units Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L x W x H): 3065 x 1600 x 1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (surface smoothing, de-nibbing, and edge rounding) or intermediate sanding of profiled window bars. Equipped with Softdisc technology for visible surfaces, as well as automatic profile and width adjustment. - 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm 1 top-mounted softdisc unit Ø=200 mm, 0.75 kW 1 top-mounted flap wheel unit L=200 mm, 0.75 kW 1 bottom-mounted softdisc unit Ø=200 mm, 0.75 kW 1 bottom-mounted flap wheel unit L=200 mm, 0.75 kW 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all flap wheel units directly above the incoming workpiece edges. Plunging allows deeper setting of units into the profiles. - Motorized workpiece thickness adjustment - Variable sanding flap speed via frequency converters for adaptable sanding intensity (separate control for discs, surface wheels, and side wheels) - Disc units as Softdisc with Velcro fastening for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belts, plus spring-loaded pressure rollers with infinitely variable speed of 4–15 m/min - Touch panel settings: workpiece thickness, workpiece width (individual setting for left side units), plunge depth of side units, spindle speed, feed speed - Parameters can be saved as machine programs in program mode - Operation in automatic mode with contactless workpiece width and profile detection, and automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically controlled driven infeed roller, automatic clamping of the workpiece, and start of feed after unit adjustment - Red/green status lights to indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with flip operation) - Workpiece height: 12–160 mm - Extraction connections: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller table with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price for the above machine: on request! ----- Special accessories (with additional cost): Pgodpfxjvnv Uhj Al Isk Set of replacement flaps for Leistomat SD-200, consisting of: Surface units: 30 Strips EH45/200 - 7 (rollers) 30 Strips EH45/200 - 20 (rollers) Rabbet units: 96 Strips M55/120 - 4 SmartFlex flap disc Ø200 solid, with 30 grooves, 50 mm long Set of replacement flaps for SmartFlex flap disc, consisting of: 60 Strips M35/50 K 180-7 S Sanding paper disc VB for Softdisc, D=200 mm, grit 220, with Velour backing (Velcro), pack of 100 pieces Sanding paper disc VB for Softdisc, D=200 mm, grit 280, with Velour backing (Velcro), pack of 100 pieces ----- ...

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, 01 Psdpfx Aoy Ew N Hsl Iogk

Kondisi: sangat baik (bekas), NOMOR KATALOG 7050 DATA TEKNIS - diameter roda: 800 mm - ukuran meja: 1100x800 mm - meja dapat diatur kemiringannya - motor: 5,5 kW - tinggi pemotongan maksimum: 340 mm - jarak pita ke rangka: 680 mm - diameter saluran ekstraksi: 90 mm - dimensi (p/l/t): 1500x950x2600 mm - berat: 987 kg Pgsdpfx Asx Swvyjl Ijk KEUNGGULAN – produksi Polandia – kondisi sangat baik – gergaji bekas Harga netto: 8.900 PLN Harga netto: 2.120 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah seiring fluktuasi nilai tukar)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, diameter putar di atas sled silang: 800 mm, lubang spindel: 92 mm, diameter pembubutan: 800 mm, panjang pembubutan: 6.000 mm, panjang total: 9.000 mm, lebar total: 1.900 mm, tinggi total: 2.100 mm, kecepatan spindel (maks.): 1.400 rpm, kecepatan spindel (min.): 14 rpm, Heidenhain ND-780 mit 3-Achsen-Digitalanzeige (X, Z0, Z) Heidenhain LS388C Maßstäbe 2 x CE-Futterabdeckungen für 500 & 900 mm SCHUNK 3-Backenfutter Ø 400-102 mm Bison 4-Backenfutter ... Lünette Ø 30 - 210 mm Lünette Ø 210 - 370 mm Spitzenweite (DBC): 6.000 mm Umlaufdurchmesser über Bett: 800 mm Umlaufdurchmesser über Planschieber: 520 mm Umlaufdurchmesser in der Bettbrücke: 870 mm Bettbrückenlänge: 320 mm Spindelbohrung: 92 mm Spindelleistung: 15 kW Bettbreite: 550 mm Spindelaufnahme: 6 MK (Morsekegel) Drehzahlbereich: 14 – 1.400 min⁻¹ Länge: 9.000 mm Breite: 1.900 mm Höhe: 2.100 mm Gewicht: 7.670 kg Pedpfx Aovn Svuol Isgk

Kondisi: bekas, berat kosong: 7.360 kg, berat muatan maksimum: 25.640 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2017, suspensi: udara, ukuran ban: 385/65 R22.5, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.360 kg, berat muatan maksimum: 25.640 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2017, inspeksi berikutnya (TÜV): 01/2027, suspensi: udara, ukuran ban: 385/65 R22.5, Perlengkapan: ABS,

Kondisi: bekas, berat kosong: 7.360 kg, berat muatan maksimum: 25.640 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2017, inspeksi berikutnya (TÜV): 01/2027, suspensi: udara, ukuran ban: 385/65 R22.5, Perlengkapan: ABS,