Beli Berg & Schmid Vks 370 Va bekas (5.702)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece... Hfedpfxeuxfu Ns Aa Dsi

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal movement of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight, max. — between centres: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Required space approx.: 4.2 x 2.0 m Photo: Machine of identical construction shown with centre height 225 mm Version R: Machine equipped with central lubrication and roller guide in the flat way of the X-axis, as well as air lift-off in the grinding headstock. - Digital display on 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (height adjustment using spindle not possible) - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories on request. Hjdpfx Aod Ih D Hoa Djfi The machine tool does not currently comply with the basic safety and protection requirements as outlined in the BetrSichV 2015. An assessment of the required minimum protection level must be determined by means of a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Hfsdpfx Asuxfucea Dei Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Hfjdpfx Aajt Ii Nuo Dji Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left grinding wheel 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR control system and BEMA cylindrical grinding interface. Fitted with a new, maintenance-friendly enclosure. Hsdst Ii Rfspfx Aa Dsfi Completely overhauled according to Kellenberger inspection protocol.

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine_01 Hfedpfjxyadaox Aa Dei

Kondisi: baik (bekas), Tahun pembuatan: 1990, Dibuat tahun 1990 Ukuran: maks. 460 x 305 x 60 mm min. 140 x 103 x 2 mm Ketebalan blok buku: maks. 60 mm min. 2 mm Ukuran sampul: maks. 470 x 655 mm min. 140 x 210 mm Kecepatan: maks. 7.000 c/h Perlengkapan mesin pengumpul: pengumpul ZTM 370 x 20 kontrol lembar hilang dan lembar ganda pengeluaran silang mesin perekat sempurna: 26 penjepit stasiun pemilling stasiun persiapan punggung buku ekstraksi debu ekstraksi asap unit lem hotmelt punggung buku unit lem hotmelt punggung buku kedua unit lem hotmelt samping feeder sampul stream Hjdpsgmr N Tsfx Aa Dofi stasiun penekanan sampul ke-2 perangkat lay down standar: 1 set manual operator 1 set diagram kelistrikan 1 set alat standar

Kondisi: bekas,

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Halo, kami menawarkan untuk dijual 2 mesin IDC merek LUMBERG, model VARICON 7000. Hedpfxjxt Rn No Aa Defi Spesifikasi: - VARICON 7000-1: Rast 5, Rast 2,5 Plus, tahun produksi 2010 - foto dan video tersedia di iklan. (Iklan, harga, dan foto hanya berlaku untuk mesin ini) - VARICON 7000-14: Rast 2,5 Plus, tahun produksi 2016 - foto dan video tersedia berdasarkan permintaan. Mesin dalam kondisi berfungsi penuh. Harga untuk mesin VARICON 7000-1: Rast 5, Rast 2,5 Plus, tahun produksi 2010

Kondisi: bekas, specs-001 Hsdpfsxmg Ekox Aa Dofi

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, panjang total: 226 mm, lebar total: 395 mm, tinggi total: 260 mm, jenis arus masuk: tiga fasa, daya: 15 kW (20,39 hp), Einstellen der Gesamtzeit Hfedpfx Ajwd Il Nsa Dsi Frequenzgeschwindigkeitsregelung Automatische Entladung Vakuum 0–95 % Vakuumsystemfilter Volumen: 3.700 Liter Maschinenabmessungen in cm: Länge: 226 Breite: 395 Höhe: 260 Elektrische Leistung: 15 kW

Kondisi: bekas, Three-jaw chuck, three-jaw lathe chuck, power chuck - Chuck size: Ø 250 mm Hedpfxsdu Ud Aj Aa Djfi - Internal bore: Ø 47 mm - Short taper mount for: bayonet disc fastening, taper size 8 - Weight: 41 kg

Kondisi: baik (bekas), 20240615-01 Hfjdpeb A Iv Nofx Aa Doi

Kondisi: bekas, Steel staircase, exterior staircase, machine staircase, machine access steps, attachable staircase - Machine staircase: robust design, suitable as machine access steps - Material: stainless steel (VA) Hfsdpeiay Hdjfx Aa Dei - Step height: approx. 310 mm - Height: top step approx. 1680 mm - Transport dimensions: 1770 x 535 x H190 mm - Weight: 29 kg

Kondisi: bekas, Clamping motor for wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic power chuck, power chuck hydraulic motor, electric clamp drive -Berg: Clamping technology, clamping motor type FSP 140 U Hfsdpfx Asd S Hqdea Dei -Shaft: M22 x 1.5 -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Kondisi: baik (bekas), In this offer, you are purchasing a used long sheet feeder "Canon BDT VX 370". Item for sale: Hjdpfx Aael Axtge Dofi 1 x Canon BDT VX370 compatible with: - Canon imagePRESS C10000VP - Canon imagePRESS C8000VP - Ricoh Pro C7100 series - Ricoh Pro C9100 series Condition: This offer is for a used device which may show signs of wear (minor scratches or yellowing). - The device has been function-tested Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment in advance! Sea-worthy packaging and worldwide shipping available upon request! A functional test will be documented on video prior to shipping or collection. For further information, feel free to contact us directly.

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2011, panjang ruang muatan: 5.100 mm, lebar ruang muat: 2.400 mm, tinggi ruang muatan: 1.180 mm, panjang total: 7.320 mm, lebar total: 2.550 mm, tinggi total: 3.750 mm, suspensi: udara, ukuran ban: 385/65R22,5, warna: lain, Tahun pembuatan: 2011, Perlengkapan: ABS,

Kondisi: baru, Dalam penawaran ini, Anda membeli feeder long sheet baru "BDT VX 370" Objek penjualan: 1 x BDT VX 370 untuk mesin berikut: Canon imagePRESS V1350 telah termasuk S-Bridge Kondisi: Perangkat baru dalam kemasan asli Pengemasan dan pengiriman: Silakan datang untuk melihat perangkat selama jam kerja kami. Mohon buat janji terlebih dahulu! Hfedpfxeyuuc Ie Aa Dei Pengemasan ekspor tahan laut dan pengiriman ke seluruh dunia tersedia atas permintaan! Untuk informasi lebih lanjut, silakan hubungi kami secara langsung.

Kondisi: bekas, Fungsionalitas: fungsi terbatas, lebar total: 1.200 mm, tinggi total: 1.300 mm, panjang total: 3.000 mm, Mesin pengamplas sabuk longitudinal dijual Hfjdpfszgvh Isx Aa Dsi

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 08/2013, warna: lain, Tahun pembuatan: 2013, Berat kosong: 7.100 kg Sumbu 1: kiri 8 mm, kanan 9 mm Sumbu 2: kiri 8 mm, kanan 9 mm Sumbu 3: kiri 7 mm, kanan 7 mm Hodpow Uhzkefx Aa Dsfi Kami memiliki kemungkinan untuk menumpuk trailer!

Kondisi: sangat baik (bekas), Kami menawarkan sistem pengukuran optik 3D profesional KEYENCE seri VL, dirancang untuk pemindaian cepat dan akurat komponen teknis. Hjdjyc H Npepfx Aa Defi Paket ini ideal untuk kontrol kualitas, reverse engineering, serta pengukuran tanpa kontak di industri. Paket terdiri dari: – Kepala pemindai VL-370 Kondisi: sangat baik, perangkat terawat Catatan: paket dijual tanpa monitor / unit PC (dapat dilengkapi secara mandiri) Produksi: Made in Japan

Kondisi: bekas, konfigurasi gandar: 2 gandar, pendaftaran pertama: 08/2015, panjang ruang muatan: 13.600 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.760 mm, panjang total: 13.900 mm, lebar total: 2.550 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 275/70R22,5, warna: lain, Tahun pembuatan: 2015, Perlengkapan: ABS, tail lift,

Kondisi: bekas, berat muatan maksimum: 33.525 kg, berat keseluruhan: 46.000 kg, konfigurasi gandar: 3 gardan, pendaftaran pertama: 04/2008, Tahun pembuatan: 2008, Perlengkapan: ABS,

Kondisi: bekas, berat muatan maksimum: 18.700 kg, berat keseluruhan: 24.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/2004, panjang ruang muatan: 5.046 mm, lebar ruang muat: 2.325 mm, Tahun pembuatan: 2004, Perlengkapan: ABS,

Kondisi: bekas, #de-bergtk-1234 Hsdpfxey S D Hls Aa Dsfi