Beli Calende Schiebetischpresse bekas (156)

Kondisi: bekas, Tahun pembuatan: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office control Working area X-axis: 3,228 mm Working area Y-axis: 1,580 mm Working area Z-axis: 200 mm with suction cups H74 mm Working area Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support rails Pneumatic clamping installation, divided into two Y zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for rails Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm Automatic tool changer with 16 positions on the X-axis carriage Independent Tesa drilling spindles BH17 are arranged as follows: No. 5 independent spindles for vertical drilling in the X direction No. 5 independent spindles for vertical drilling in the Y direction No. 4 spindles for horizontal drilling in the X direction No. 2 spindles for horizontal drilling in the Y direction No. 1 blade integrated into the drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with premelter – edge pressure system with double rubberized roller for spokes, max. inner diameter 30 mm and sensor for edge joint – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – option for manual edge insertion Plastic edge thickness: 0.4 to 3 mm Wood edge thickness: 0.4 to 2 mm Laminate edge thickness: 0.4 to 1.2 mm Podeugpwnjpfx Abwsgn Maximum edge width: 65 mm Workpiece thickness: 10 to 60 mm Minimum machinable internal radius with edging: 30 mm Maximum external radius for edges (proportional to edge thickness and stiffness): * 10 mm with up to 1 mm edge thickness * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum size of edged panel: 300 x 300 mm Minimum internal diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Edge magazine with 2 positions in the safety enclosure for edges up to max. thickness 65 mm Finish additive cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle No. 1 unit for rounding/contouring edges No. 1 EF60A combination unit trimmer/scraper Perimeter safety fence Chip extraction system with motorized conveyor Liquid cooling system Automatic lubrication system No. 1 vacuum pump, 250 m³/h TECHNICAL DATA TO BE CONFIRMED

Kondisi: bekas, Tahun pembuatan: 2015, Numerical control system Startouch Panel height mm: 60 PVC/ABS edging roll thickness mm: 3 Solid wood strips mm: 6 Feed speed up to 11 m/min Electronically adjustable working height via CNC Panel support guide with adjustment Side roller conveyor with idler wheels for panel support Pgsdpfjtxtzkex Abwsn Anti-adhesive unit Adjustable pre-milling unit with two motors Edge roll holder plate Gluing unit for EVA adhesive Edge pressing unit for straight profiles with adjustable pressure rollers Trimming unit with 2 motors and automatic tilt adjustment Electronically adjustable corner rounding unit via CNC Multi-function corner rounding unit (edger + rounder), CNC adjustable Edge scraping unit Glue scraping unit Oscillating brush unit

Kondisi: bekas, Tahun pembuatan: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment allows for the design of the finished product, process definition, work plan setup, simulation of machining operations on the 3D model of the machine, and generation of the necessary machine programs. bSolid – 3-axis machining bSolid – 5-axis machining module for surface operations using 5-axis units and interpolation movements across all 5 axes (X, Y, Z, C, B). The module includes the following commands: • 3D roughing and finishing operations assigned to surfaces • Extension or projection of toolpaths onto a curved surface • Machining on a plane • Following 2D or 3D curves with any tool type bSolid – 3D engraving bSolid – Import external formats Work areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H = 74 mm Z = 245 mm with modules H = 29 mm Clamping area in Y: * 1650 mm, with a thickness of up to 60 mm on modules with a height of 74 mm * 1600 mm, with a thickness over 60 mm on modules with a height of 74 mm. 10 ATS levels – 40 carriages. The system includes: • 2 aluminium bars (1 left/1 right) on which the lateral stops glide. • 10 aluminium work tables. The tables slide on hardened and ground linear guides with recirculating ball bearings. Locking on both linear guides, front and rear, is achieved by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones along X. Automatic positioning (EPS) for work tables. “EPS” (Electronic Positioning System): Device for automatic NC-controlled positioning of work tables and carriages, including locking mechanisms to exclude possible operator errors. Rear row stop, 140 mm stroke Intermediate row stop, positioned at 405 mm, 140 mm stroke Front row stop, positioned at 1460 mm, 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) per system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check whether the stops are lowered 12 clamps for holding narrow workpieces 6 loading aid bar lifters, for H = 74 mm module 5A configuration, for Rover B. Configuration for high productivity and flexibility thanks to two processing units (4 and 5 axis) and the option for simultaneous tool change. Includes axes and carriages for the movement of the main processing units. Comes with 2 inverters. Pjdpfx Ajw D E A Eebwjgn Second Y-axis. Allows separation of front and rear Y carriages with independent drive. Both Y carriages reach a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 operation • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 operation • Ceramic bearings • Clockwise and counterclockwise operation • Speed programmable by NC from 1,000 to 24,000 rpm • Release via pneumatic actuator using prismatic linear guide and recirculating ball bearings • Cover included for chip extraction with 6 positions ...

Kondisi: bekas, Tahun pembuatan: 2008, POWER CONTROL PC 20+ Panel height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid wood edge thickness (mm): 12 Feed speed: 20 m/min Manual feeding guide Pre-milling unit EVA glue application and premelting unit Edge magazine End trimming unit Two-motor overlap milling unit Two-motor offset chamfering unit with NC adjustment Two-motor rounding unit Edge scraper Glue scraper Brushing unit Pjdpfx Absw Db Rfjwsgn

Kondisi: bekas, Panel return system for use with a single edge banding machine. The panel is transported to the operator via a motorized belt and a roller/conveyor table. Equipped with Moeller mini control unit. Maximum panel dimensions: 2500 x 1450 mm. Maximum panel height: 60 mm. Working speed: 8 – 25 m/min. Working height from floor: 835 – 960 mm. Pgodpfx Aow Ahixjbwon

Kondisi: siap digunakan (bekas), Kopf für Schlaufenheftung (Heftkopf) für Kalenderösen Psdpfx Aeir A Hpobwegn