Beli Chiron Mill 6000 High Speed bekas (53.005)

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Hfodpfxsynt Ucj Aa Dsi Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: bekas, Tahun pembuatan: 1976, 88628009 Hfedpfx Aaeyn R N Do Dji

Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 950 mm, lebar meja: 910 mm, gaya penekanan: 80 t, berat keseluruhan: 16.500 kg, gaya punching: 80 t, Max. pressing force: 80 tons / 800 kN Stroke rate: Max.: 1000 strokes/min Min.: 100 strokes/min Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool mass: 600 kg Maximum tool width: 970 mm Clamping area table: L–R: 950 mm F–B: 910 mm Clamping area ram: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip feed height: Max.: 160 mm Min.: 70 mm Strip feeder (left) Bruderer BBV 202/120 Max. strip width: 202 mm Feed length: 0–120 mm Table opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Hfedpfx Aaexzr Ruj Doi Total weight with 1× BBV 202: approx. 17,500 kg Control cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The sound enclosure is not included in the offer, but can be purchased separately. Our stock offer also includes many further models from Bruderer, Schaal, Mabu, and Bihler presses as well as reel and straightening machines.

Kondisi: siap digunakan (bekas), CNC router industri untuk dijual – AXYZ Automation Group Automation Series 6010, dilengkapi spindle berkecepatan tinggi dari Perske GmbH. Mesin produksi format besar ini cocok untuk pengerjaan kayu, plastik, papan reklame, dan pekerjaan ringan aluminium. Konstruksi gantry kokoh dengan meja vakum – ideal untuk material lembaran. ⚙️ Spesifikasi Utama Model: AXYZ 6010 (Seri 6000) Ukuran Meja: sekitar 3048 x 2150mm (10 x 6 kaki) Spindle: Spindle berkecepatan tinggi Perske Daya: sekitar 4kW / 5,5HP Kecepatan: hingga 18.000 – 21.000 RPM Meja: Meja vakum (tipe grid) Hjdjy A R Dxopfx Aa Dofi Sumbu: CNC gantry 3 sumbu Daya listrik: 3 fase Konstruksi: Rangka industri tugas berat

Tahun pembuatan: 1985, Kondisi: hampir baru (bekas), Wanzke Hydraulic High-Speed Press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press manufactured by Wanzke. This press is in like-new condition! Technical data: Manufacturer: Wanzke Model: SP/F 12 Pressing force: 120 kN Return force: 17.8 kN Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Hjdpjhgiyiofx Aa Dsfi Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety clearance: 4 mm Accessories: GM1 Decoiler

Tahun pembuatan: 1985, Kondisi: hampir baru (bekas), Wanzke hydraulic high-speed press SP/F12 double-column press. -WKG 499- Offered here is a hydraulic high-speed press from Wanzke. This press is in like-new condition! There are 2 presses mounted on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Press force: 120 kN Return force: 17.8 kN Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety distance: 4 mm Strokes/min: Working stroke: 10 mm/sec Rapid advance: 20 mm/sec Max. stroke: 100 mm Table size: 320 x 300 x 280 mm Accessories: Hedpfx Aehgiwnsa Dofi Double decoiler type GMD1 Digital control system "Tronic press" with full upgradeability to CNC control. A total of 2 units are available!

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 315 t Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Hsdpsuqd Tmjfx Aa Dsfi Die height (stroke down, adjustment up): 370 mm Table clamping area approx.: 1600 x 1100 mm Ram clamping area approx.: 1600 x 1100 mm Pass-through opening in table: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Table height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions (LxWxH): 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment The press was retrofitted to CE standards in 2015. In 2021, a SIEMENS S7-TIA control system was installed on the press; the coil feeding line still has a SIEMENS S5 control system. Additional equipment Lifting rails in the press table Automation Coil line KEMMERICH consisting of: Decoiler: capacity: 5 t Straightening machine: Roller diameter: 70 mm Material thickness: 1 - 4.5 mm Strip width: 300 mm Roller feed: Roller diameter: 160 mm Feed length: 0.1 - 9,999.9 mm Strip width: 30 - 350 mm Material thickness: 0.2 - 10 mm Material cross-section: 1,500 mm² Feeding accuracy: +/- 0.05 mm Loading station

Tahun pembuatan: 2022, Kondisi: baru, Cocok digunakan untuk: mesin konstruksi Hfsdsn Tm Sxopfx Aa Dei

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, FOR SALE: BRUDERER BSTA 60 High-Speed Punch Press With automatic strip feeder BBV 300/200 600 kN | 100–800 strokes/min | Fully automatic | Swiss top quality Technical Highlights: Rated force: 600 kN Strokes: 100–800 per minute Max. feed length: 200 mm Year of manufacture: Unknown (no nameplate) / Functional test: 2025 Drive power: 30 HP Control voltage: 24 V AC Power supply: 440 V AC / 50 Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 / 51 / 58 / 64 / 70 / 76 mm Shut height adjustment: 80 mm Working dimensions: Max. tool acceptance width: 620 mm Strip width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max. strip width: 300 mm Max. feed pitch: 200 mm Max. material thickness: 6 mm Feed angle: 180° Machine dimensions: Floor space (L × W × H): 2210 × 2075 × 2190 mm Hfsdpfsxz Ugxjx Aa Dei Weight (approx.): 8,000 kg Equipment: BBV 300 feeder system – fully synchronized mechanical strip feeding system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediately available in Europe Worldwide shipping possible Contact us today for pricing and further technical details. We are happy to support you in modernizing your production line with Swiss precision engineering.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots Hedpfxsylnpie Aa Defi • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), nomor mesin/kendaraan: Blinie, BSTA 30 Stroke rate: 600 spm Feed BBV 120/60 High-performance: 600 spm Pressing force: 30 tons Maximum strip width: 190 mm Hfedpfx Ajdguhcsa Doi Further high-speed presses in stock from Bruderer models BSTA 18, 20, 30, 200, 50 as well as Schaal and Mabu presses.

Kondisi: baik (bekas), BSTA 30 Stroke rate: 600 spm Feed: BBV High performance: 600 spm Hfedpfx Aajda Ha Nj Dji Maximum pressing force: 300 kN Maximum strip width: 190 mm Machine overhauled Good condition More high-speed presses in stock from Bruderer (models BSTA 18, 20, 30, 200, 50) as well as Schaal and Mabu presses.

Kondisi: baik (bekas), BSTA 18 Hjdpfx Ae Udtyea Defi Bruderer BBV Feed High performance: 600 spm Maximum press force: 180 kN Maximum strip width: 120 mm Feed: Bruderer BBV190 Completely overhauled with silicon Good condition More high-speed presses in stock: Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses

Kondisi: bekas, Door size: 4040x4300 mm Sliding profile length: 6530 mm Manufacturer: Hörmann Hfjdpfevpd T Iex Aa Dsi

Kondisi: bekas, Diuji dan diperbarui secara menyeluruh, mesin mixer lengan bajak kecepatan tinggi (T-Arm) Winkworth model RT400 bekas, bahan stainless steel 321. Produsen: Winkworth Material: Stainless Steel (321) Kapasitas: 400 liter (tergantung produk) Ruang Pencampur: Panjang 1.300mm x Diameter 800mm Jenis Bilah: Bilah T-Arm Motor: Motor dan Gearbox 5,5kW Termasuk: Jaket baja ringan eksternal Hsdpfjymazgex Aa Djfi Tersedia ruang untuk satu chopper tetapi belum terpasang. Video mixer ini tersedia di bawah. Spesifikasi: Volume Bowl: 105,7 galon Daya Motor: 5,5 hp Bahan Konstruksi: Stainless Steel (321) Chopper (Y/T): Tidak Jaket (Y/T): Ya Dimensi: Panjang 1.300mm x Diameter 800mm

Kondisi: bekas, Diuji secara menyeluruh dan telah direkondisi, mixer ploughshare kecepatan tinggi Winkworth model RT400 bekas berbahan baja tahan karat (lengan T). Produsen: Winkworth Bahan: Stainless steel Tahun Pembuatan: 2016 Kapasitas: 400 liter (tergantung produk) Palung pencampur: 1.300mm panjang x 800mm diameter. Jenis Pisau: Pisau ploughshare lengan T dengan sistem penggerak/girboks. Hedpfxeymayis Aa Defi Video mixer ini tersedia di bawah. Spesifikasi: Volume Bowl: 105,7 galon Material Konstruksi: Baja tahan karat Dimensi: 1.300mm panjang x 800mm diameter

Tahun pembuatan: 2025, jam operasional: 15 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, arus masuk: 230 A, nomor mesin/kendaraan: 202505, Absolutely as new! Demonstration unit (Price incl. 19% VAT) - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC control for precise power regulation - Integrated exhaust control from the cooking chamber Scope of delivery - Starter accessory set consisting of: - 1 × pan, rectangular, smooth, 260 × 260 mm - 1 × round snack pan, Ø 190 mm - 1 × round snack pan, Ø 250 mm - 1 × tong for 50 small dishes - 1 × turner, 360 mm - 1 × silicone tong, 260 mm - Power cable Housing & Design - Color: Red / Stainless Steel Technical Data - Dimensions (H × W × D): 420 × 540 × 500 mm - Power: 3,000 W - Weight: 29.5 kg - Connection: 230 V / 50 Hz / 16 A The speed oven is a compact high-performance oven designed for professional gastronomy. It is suitable for rapid cooking, baking, and heating of various dishes and has been developed for efficient workflows at high power levels. The speed oven features a non-stick cooking chamber coating and an integrated exhaust control system. Thanks to the TRIAC control, the unit enables precise handling and consistent power management. Low-odor cooking with roasting properties, without fats and oils ... Functionality - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC control for precise power regulation - Integrated exhaust control from the cooking chamber Extensive accessories, such as steak contact plate.... Hfjdpfxeyxy R Ts Aa Doi (Source: Website Reamotion Delmenhorst)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Hfjdpfx Aeyhdvkoa Dji Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Hfedou Aa I Sepfx Aa Dsi Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Hfsdpfxeu Dg D Ae Aa Doi Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Hjdermkfnjpfx Aa Defi Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) Hfedpfjvv Spkjx Aa Dei with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, de-UV-Inkjetdrucker, Baujahr und Inbetriebnahme 2019 – hergestellt in Japan. Laut beiliegender Zähleraufnahme – 1.551 Betriebsstunden und 37.000 m² Druckleistung. Perfekter Betriebszustand – die Anlage befindet sich im laufenden Produktionsbetrieb und kann besichtigt bzw. getestet werden. Arbeitstisch und Materialabmessungen: - Fester Tisch, Maße: 125 x 250 cm, Tragfähigkeit: 34 kg - Maximale Materialstärke: 5,08 cm - Hochleistungs-Vakuumsystem mit 6 Vakuumzonen - 5 pneumatische Führungen, Mindestmaß je Stütze mit Führungen: 60 x 80 cm Druckköpfe: - 2 piezoelektrische Köpfe mit je 636 Düsen pro Kanal, variabler Tropfengröße von 6 bis 42 Pikoliter - Maximale von den Köpfen abgedeckte Druckfläche: 126 x 251 cm (randloser Druck) - Düsen-Erkennungs- und Kompensationssystem - Automatische Selbstreinigung (optional, nicht zwingend erforderlich) Hfedomcw S Sopfx Aa Dsi Farbanzahl: - Digitaldrucker UV-Tinte - 4 Farben: CMYK (Cyan, Magenta, Gelb, Schwarz), erweiterbar auf 6 Farben (Weiß + transparent/lack) Auflösung und Produktivität: - Max. Auflösung: 1.440 dpi - Expressmodus: 58,7 m²/h - Produktionsmodus: 35,7 m²/h - Qualitätsmodus: 25,3 m²/h - Qualitätsmodus 2 Schichten: 12,5 m²/h - UV-Tintenbehälter mind. 1 Liter Genauigkeit: Linienstärke: - Max. Fehler +/- 0,8 mm auf 2,5 m Seite - Max. Fehler +/- 0,4 mm auf 1,25 m Seite Geradheit: - Max. Fehler +/- 0,7 mm auf 2,5 m Seite - Max. Fehler +/- 0,5 mm auf 1,25 m Seite Diagonalfehler: - Max. Fehler +/- 1,0 mm auf 2,5 x 1,25 m Fläche Sonstiges: - Patentierte Lösung für Grauverläufe - Standfuß/Arbeitstisch - Ionisationsstab (elektrostatischer Entladungsschutz) - Spezielle Brücke zum Be- und Entladen bzw. Bewegen des Geräts EXW – Alter Preis: 49.000 EUR, neuer Preis: 35.000 EUR (zzgl. MwSt. in der EU)

Kondisi: hampir baru (bekas), Collette Hochgeschwindigkeits-Knetmaschine Modell: SM200 Hochgeschwindigkeits-Knetmaschinen, 200 Liter, Edelstahlbehälter und -mischwerkzeug, nagelneue Unitronics HMI- und PLC-Steuerung. Hfsdpfx Aod D N Rmea Doi

Kondisi: baru, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will provide you with an attractive offer including installation and service. ISGEC has delivered to over 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to hearing from you. Hedpfx Aof Rt Irea Dofi