Beli Demag Lengan Derek bekas (3.099)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 15.642 h, diameter sekrup: 45 mm, tinggi total: 2.213 mm, berat keseluruhan: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precise plastics processing. Take advantage of this opportunity to purchase the SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Please contact us for further information. Additional equipment • Fanuc robot Machine benefits Quality-related machine benefits • Process data acquisition, mould protection Technical machine benefits • Minimum mould height: 350 mm / maximum mould height: 745 mm • Electronic main connection: 3/400 V 50Hz • Programmable sequence, high-dynamic feed speed, hydraulic pressure-dependent hold pressure control, digital/wear-free position measuring system. Additional information Standard equipment: Support of the movable platen via linear guides/ Ejector with short/long stroke/ Interface for external printer (hard copy)/ Individual motion optimization of the axes (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Separate mains connection for drive / heating/ Coloured data display/ Enhanced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mould and machine cooling/ Basic version Europe/ Corrosion protection/ Painting: Jet Black (RAL9005): machine bed with built-in parts, lower control cabinet/ Signal White (RAL9003): clamping unit, injection unit, nozzle guard/ Signal White (RAL9003): fixed safety devices, upper control cabinet/ Signal White (RAL9003): protective doors/ Textured surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (EUROMAP March '96)/ Centre diameter fixed platen: 160 mm/ Centre diameter moving platen: 160 mm/ Without side ejector plate/ Standard mould installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only with protective door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mould movement)/ Oil lubrication of toggle/ Injection unit/ Optional equipment: Servo-controlled pump (activeDrive)/ Emergency stop switch on the operator side/ Separate opener for fine filtration in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Signal beacon/ Operation with protective door open (operator side)/ 6 pneumatic 5/2-way valves on the moving platen (programmable)/ 6 pneumatic 5/2-way valves on the fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ 1-circuit core pull via proportional valve (programmable, with check valves)/ Manual pressure relief for 1-circuit core pull/ Widened protective cover on operator side (250 mm)/ Psdpfx Alox D Hnts Ispr Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mould protection via sensor during closing (activeQ)/ Manually adjustable monitoring switch for mould-open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 27.551 h, gaya penjepit: 2.200 kN, tinggi total: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment • Sepro Robot SDR 22 Machine Advantages Technical Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max shot volume: 329 cm³ / max shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Clamping force: 2420 kN / maximum opening stroke: 550 mm / minimum mould height: 300 mm / maximum mould height: 580 mm / maximum platen distance: 1130 mm • Clamping platens (HxV): 880x830 mm / tie bar spacing (HxV): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Pedsx D Hnyepfx Al Iopr Machine depth: 6460 mm

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has operated for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for further information. • The dosing unit (orange section) is not included. • Integrated socket combination, country-specific • Disconnectable via main switch and shutdown program Ppjdpfox D Nlujx Al Ier • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the moving mould mounting platen; • Programmable, supply via central air connection • Including hoses. Inputs and outputs are freely programmable; 3 inputs and 3 outputs; • Terminal outside of the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via directional control valve on moving platen; Q-independent (programmable); • With pilot-operated non-return valves to prevent core drift • Mould mounting dimensions E (similar to Euromap March 96) • With lateral ejector plate, locating diameter of fixed platen: 160 mm • Locating diameter of moving platen: • Increased mould installation height by 100.0 mm • Min: 340 mm • Max: 790 mm

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-GB Ppjdsx D Rqrepfx Al Ior

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.000 h, gaya penjepit: 500 kN, diameter sekrup: 25 mm, berat injeksi: 46 g, tinggi total: 1.779 mm, berat keseluruhan: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It is equipped with a fully electric direct drive system and the NC5+ control unit for enhanced energy efficiency and precise injection dynamics. The package includes a granulate dryer, industrial robot, conveyor belt, and temperature control units, making it ideal for high-quality injection molding processes. Please contact us for further information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mold safety • Fully electric direct drive • Ultra-precise direct drive motors with a 0.1 ms response time • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping plates: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Ppedpfxex D Eccs Al Ijr Dimensions Machine depth: 4308 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 17.577 h, gaya penjepit: 1.600 kN, tinggi total: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart available for sale. Please contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Advantages • Clamping unit: 160 / Clamping force: 1,760 kN / Maximum opening stroke: 495 mm / Minimum mould installation height: 275 mm / Maximum mould installation height: 585 mm • Maximum distance between platen faces: 1,080 mm / Mounting platen size (H x V): 760 x 785 mm / Clear tie bar distance (H x V): 520 x 520 mm • Ejector stroke: 125 mm / Ejection force: 35 kN • Injection unit: 340 / Screw diameter: 35 mm / L:D ratio: 20 / Injection rate (PS) without accumulator: 288 cm³/s • Metering stroke: 162 mm / Maximum nozzle stroke: 350 mm / Nozzle immersion depth (SVO): 20 mm / Nozzle contact force: 30 kN • Material hopper capacity: 35 L / Max. injection speed, standard: 300 mm/s / Max. injection speed, enhanced: 500 mm/s • Net weight without oil fill: 7,300 kg Additional Information Electrical and Pneumatic Interfaces: Power Sockets: 2 x Schuko (1Ph, 230V, 10A) 2 x IECEE (3Ph, 400V, 16A) – disconnectable via main switch Additional Schuko socket also provided (same rating) Valves: 1 x pneumatic 5/2 valve on moving platen (programmable) 2 x pneumatic 5/2 valves on stationary platen (programmable) I/O: 3 digital inputs / 3 digital outputs (freely programmable) Terminal block outside control cabinet Air & Cooling: Centralised air supply and piping Cooling system: open circuit Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) Separate water supply connection for cooling (mould + machine) Deactivation of mould cooling (programmable by time) Mechanical Properties and Movement: Clamping and injection unit colours: Jet black (RAL9005): bed, pump unit, base cabinet Signal white (RAL9003): clamping unit, injection unit, safety guards, covers, safety doors Mould mounting platens: E-standard arrangement (similar to EUROMAP, March 1996) No lateral ejector plate Ejector: held in front position against spring-loaded ejector in mould Standard mould height Standard closing speed Motion only active with safety guard closed Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter Non-return valve: 3-piece, ring design Control, Programming and Monitoring: Inputs/outputs and interlock logic: freely programmable Switching programs (e.g., dry cycle, start-up scrap counter, timer-controlled cooling) Injection process: Max. injection force at max. injection speed: 200 mm/s Back pressure programmable via 6-step polygon Hold pressure switchover dependent on melt pressure Pedpfx Asx D Hnmol Iepr Post-injection, back pressure, metering: closed-loop control Feed throat temperature control: closed-loop, max. 90°C ±9°C Reduced nozzle closure force (programmable) Clamping force: closed-loop control

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 122.158 h, gaya penjepit: 3.300 kN, diameter sekrup: 60 mm, This hydraulic injection moulding machine DEMAG ET 330 - 1450 was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine is equipped with a Wittmann W322-121 linear robot to enhance automation. Take advantage of the opportunity to purchase this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Minimum/maximum mould height: 330 mm / 830 mm • Opening stroke: 675 mm • Daylight between platens: 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cc • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Armoured (wear-resistant) injection unit: yes Psdoyg Nkwepfx Al Iopr • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement carried out in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/extraction device (included in the scope of delivery) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 91.810 h, gaya penjepit: 2.500 kN, diameter sekrup: 60 mm, berat injeksi: 579 g, en1 Pedpfeyfq Aljx Al Iopr

Tahun pembuatan: 2019, jam operasional: 18.138 h, Kondisi: siap digunakan (bekas), berat keseluruhan: 25.340 kg, SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 ini diproduksi pada tahun 2019. Mesin injeksi listrik yang kokoh ini memiliki diameter ulir 50 mm, gaya penutupan 3.500 kN, dan jarak antara tiang 820 mm. Mesin ini telah mencatat 18.138 jam operasi dengan 12.875.090 siklus. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 yang kami tawarkan untuk dijual. Informasi tambahan: • Diameter ulir: 50 mm Podpfx Alex D Nxzs Iepr • Volume dosis maksimum: 530 cc • Jumlah siklus: 12.875.090 • Jarak antara tiang: 820 mm • Gaya penutupan: 3.500 kN

Kondisi: bekas, Tahun pembuatan: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140,000 operating hours. Can be inspected in operation by appointment. Availability: 06/2026 Ppjdpfeyq Dqgjx Al Ier Important: The information on this page has been obtained to the best of our knowledge and belief. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute a contractual condition. We recommend that you verify all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, we recommend organising a live video inspection in most cases. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar spacing: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ({P_{max}}): 190 bar Max. flow rate ({Q_{max}}): 486 l/min System current: 409 A Heating current: 154 A

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 09550933, Tahun pembuatan: 2025, tegangan masuk: 400 V, de_DE-001 Pjdpfx Aeyw T Hrol Iepr

Tahun pembuatan: 1990, Kondisi: belum diuji (bekas), The crane is dismantled. Location: Oebisfelde. Ppodpef Sftlofx Al Ior

Tahun pembuatan: 1989, Kondisi: belum diuji (bekas), The crane is dismantled. Inspection book available. Ppedpfx Ajf Sfxqel Ier

Kondisi: baru, Tahun pembuatan: 2015, nomor mesin/kendaraan: 40600039, Partai tersedia. Beberapa unit tersedia di stok. Produk-produk ini baru dan belum pernah digunakan. Psdpeywy Ensfx Al Iopr

Kondisi: baru, Tahun pembuatan: 2019, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 40906979, Beberapa unit tersedia di stok. Produk-produk dalam keadaan baru dan belum pernah digunakan. Podsywy Dwopfx Al Ispr

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Partai berbagai model remote control tersedia. Lihat foto. Status barang (baru atau bekas) berbeda-beda per produk. Dapat dibeli terpisah atau sekaligus sebagai satu partai. Untuk informasi harga per produk, silakan kirim pesan. Stok tersedia dalam jumlah banyak untuk masing-masing produk. - DEMAG DRC-DC 6 remote control - DEMAG DRC-10 D2 remote control - DEMAG DRC-DC 10 remote control - DEMAG DRC-10 2ST D3 remote control digital - DEMAG DIR H6 remote control - DEMAG hoist flashlight door control handle (773 300 44) - DEMAG control switch DSE 10-CS - DEMAG DST7 CS22 RJ controller Ppsdpfx Aoywyyxjl Ier

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 1,5 kW (2,04 hp), kecepatan rotasi (maks.): 1.430 rpm, Motor Demag ZBA90 B-4 ED=60% Pedpfx Aleywk Tps Ispr 1,50 kW 1430 rpm 20,00 Nm Rem B020 Kondisi: Baru Versi dengan kopling Harga atas permintaan

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 4,5 kW (6,12 hp), kecepatan rotasi (maks.): 1.425 rpm, Motor Demag KBA112 B4 Kondisi: Baru Tipe konstruksi: B14 ED = 40% Ppsdjywk N Depfx Al Ior Rem ringan / kerucut 4,5 kW 1425 rpm 50 Hz Harga berdasarkan permintaan

Kondisi: perlu perbaikan (bekas), Fungsionalitas: berfungsi sepenuhnya, Demag T12 / KBA125 / FG08 / KBA80 Baru! T12 i = 24,8 Ppjdpfxeywk Ere Al Ijr KBA125 B-4 FG08 i = 9,87 KBA80 A-4 Harga atas permintaan

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, daya: 5,7 kW (7,75 hp), kecepatan rotasi (maks.): 1.415 rpm, Motor/reduktor Demag KBA125 B-4 / AF18 i = 181 ED = 100% 5,7 kW 1415 rpm Ppodpfx Asywkwzsl Isr Kondisi motor: Direvisi Harga atas permintaan

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, daya: 2,2 kW (2,99 hp), kecepatan rotasi (maks.): 2.700 rpm, Motor/reduktor Demag KBA 100 A -12/2 ED = 15/40% 0,21 / 2,2 kW 425 / 2700 rpm Pedsywkq Ujpfx Al Ispr Gearbox DO8 i = 3,24 diameter as 50 mm Kondisi: hampir seperti baru Harga atas permintaan

Kondisi: baru, Tahun pembuatan: 2021, daya: 5,6 kW (7,61 hp), kecepatan rotasi (maks.): 1.455 rpm, Motor Demag ZBA 132 AL-4 Kondisi: baru Tipe konstruksi B14 ED=100% 1455 rpm 5,6kW Pedeywkk Ispfx Al Ispr Model kopling Harga berdasarkan permintaan

Kondisi: baru, Tahun pembuatan: 2022, daya: 10 kW (13,60 hp), kecepatan rotasi (maks.): 2.800 rpm, Motor Demag GCH140 D2 Kondisi: baru, harga atas permintaan ED 100% 10,00 kW 31,5 A Ppsdpfxsywi R Tj Al Ier 2800 rpm 380V 50 Hz Rem: 19 Nm

Kondisi: baru, Tahun pembuatan: 2022, daya: 7,5 kW (10,20 hp), kecepatan rotasi (maks.): 1.435 rpm, ZBA132 B-4 B050 / A70D H-1 i= 16,7 Kondisi: Baru ED = 60% kW = 7,5 1/menit = 1435 380-400V 50 Hz Pedoywi Rgepfx Al Iopr Rem = 50 Nm Termasuk: Encoder impuls Kipas pendingin tambahan Harga atas permintaan

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ZBA112 A4 / A70D, daya: 4 kW (5,44 hp), kecepatan rotasi (maks.): 1.440 rpm, Motor Demag ZBA112 A-4 Gearbox A70D H-1-44,1 4 unit tersedia Kondisi: Bekas, dalam kondisi sangat baik ED=100% 4,0 kW 1440 rpm Rem 47,0 Nm B140 400V 50Hz Pjdoywi Edspfx Al Iopr Harga atas permintaan