Beli Hako Citymaster 1650 bekas (925)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, New speed-regulated ALMIG screw compressor LENTO 37 LK (air-cooled), oil-free, Control system: Aircontrol Premium Year: 2025 Features: - AIR CONTROL P controller Technical specifications Type: LENTO 37LK Possible operating overpressures of the unit (continuously adjustable): 5 to 10 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 6.67 m³/min at 6 bar min/max: 1.40 / 6.41 m³/min at 7 bar min/max: 1.39 / 6.14 m³/min at 8 bar min/max: 1.38 / 5.86 m³/min at 9 bar min/max: 1.37 / 5.60 m³/min at 10 bar min/max: 1.35 / 5.34 m³/min at 11 bar min/max: 1.34 / 5.09 m³/min at 12 bar min/max: 1.33 / 4.85 m³/min Rated drive motor power: 37 kW Drive motor protection rating/class: IE3 Rated fan motor power: 3.0 kW Fan motor protection rating/class: IP 54 / H Operating voltage/frequency: 380 V / 41/148 Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13): at 50% load: 74 dB(A) at 100% load: 77 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 2,265 mm Bsdpoh Unqaefx Aquewt Weight: 1,650 kg Compressed air connection: G 1 1/2" inch Screw compressors of the oil-free LENTO series ensure maximum efficiency in compressed air preparation, thanks to precise adaptation of the volume flow to actual compressed air demand, low compressed air outlet temperatures, and minimized service and maintenance costs. The demand for high-quality, 100% oil-free compressed air is not only required in pharmaceuticals, food, electronics, and medical sectors but is used everywhere products of the highest quality are manufactured. Therefore, ALMiG’s oil-free LENTO series compressors deliver maximum compressed air quality for the most sensitive applications. Only water—the most natural of all resources—is used during the compression process. The result is: - clean, environmentally-friendly compressed air without oil; aspirated dust particles are washed out by the water - clean condensate – pure water – can be discharged directly into the sewage system - lowest temperatures during compression thanks to optimal heat dissipation via water, resulting in minimal energy consumption for compressed air generation

Kondisi: baru, jenis bahan bakar: diesel, berat keseluruhan: 1.600 kg, berat kosong: 1.600 kg, Tahun pembuatan: 2024, en-gb Bwjdpfx Asggai Uequjt

Kondisi: baru, Tahun pembuatan: 2015, Twin-spindle machine with two turrets, maximum spindle speed 6,000 rpm, equipped with a vibratory feeder, robotic handling unit, and post-process measurement unit. Fanuc control system. Dimensions: 2400 x 1650 x 1790 mm (main unit). Bsdpfx Aqolgy U Esuowt

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.350 mm, diameter pembubutan di atas alas geser: 1.350 mm, diameter pembubutan di atas carriage atas: 1.000 mm, panjang pembubutan: 7.000 mm, panjang total: 9.500 mm, lebar total: 2.130 mm, tinggi total: 1.550 mm, kecepatan spindel (maks.): 630 rpm, kecepatan spindel (min.): 5 rpm, berat keseluruhan: 12.900 kg, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, Mesin bubut universal PORĘBA TR-135B2/7M telah sepenuhnya kami rekondisi dan modernisasi. Mesin ini memiliki parameter teknis yang sesuai dengan dokumentasi teknis dan operasional mesin baru, memenuhi persyaratan penerimaan teknis WOT dan standar Polandia, serta memenuhi standar Uni Eropa. Mesin ini dilengkapi dengan garansi penuh selama 12 bulan untuk suku cadang dan sistem kelistrikan. Ketersediaan: Revisi total berdasarkan pesanan, waktu pengiriman 3,5 bulan setelah pesanan diterima Data teknis: - Jarak antara pusat/sumbu putar: 7000 mm - Diameter putar di atas tempat tidur: 1350 mm - Diameter putar di atas eretan: 1000 mm - Diameter putar pada celah jembatan: 1650 mm - Diameter lubang spindle: 120 mm - Berat benda kerja maksimum antara pusat: 9.000 kg - Berat benda kerja maksimum antara pusat + 1 steadier: 12.000 kg - Berat benda kerja maksimum antara dog + 2 steadier: 15.000 kg - Jumlah kecepatan spindle: 21 - Rentang putaran (rpm): 5 - 630 - Jumlah pemberian umpan: 80 - Rentang pemberian umpan (mm/putaran): Longitudinal: 0,07 – 10 Transversal: 0,035 – 5 Eretan atas: 0,017 – 2,5 - Daya motor: 27/41 kW (gigi 1 / gigi 2) - Dimensi keseluruhan: - Panjang total: 9500 mm - Lebar: 2130 mm - Tinggi: 1550 mm - Berat total: 12900 kg Perlengkapan standar: Tailstock, pompa pendingin, pelindung chuck, pemegang alat Perlengkapan tambahan tersedia dengan biaya ekstra: - Chuck 3 atau 4 rahang, berbagai diameter dan varian - Digital Read Out untuk 2 sumbu, termasuk display, dengan pemasangan dan kalibrasi Bodpfx Aqoi Apilouewt - Steady rest 40-400 mm, dengan rol - Steady rest 400-700 mm, dengan rol - Steady rest 450-900 mm, dengan rol - Pemegang alat cepat MULTIFIX

Tahun pembuatan: 1990, Kondisi: baik (bekas), nomor mesin/kendaraan: V 206 769, 22346 Bodei Hpdyopfx Aquowt

Kondisi: baru, Tahun pembuatan: 2024, Conveyor belt: hydraulically foldable in and out Scrapers: front and rear scraper Conveyor belt length: 25,000 mm Engine: Caterpillar 4.4 Fixed Speed Engine, 133 HP Crawler chassis: track pads 400 mm Discharge height at 22.5° / 27.5°: 8,820 / 11,000 mm Conveyor belt width: 1,200 mm Feed hopper: capacity 8 m³ Bodpfx Aqsikqxtouowt

Kondisi: bekas, Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17 ID No.: Order No.: 915979 Year of manufacture: 1992 Metal link chain width: 200 mm Pusher bar spacing: approx. 380 mm Possible chip discharge length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height – discharge height: approx. 1250 mm Motor power conveyor drive: 0.37 kW Bwsdpfohwt H Asx Aquet Power supply: 400 Volt, 50 Hz - Scraper chain driven via geared motor - Coolant tank without coolant pump Required installation space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor is from a GILDEMEISTER CNC lathe. This conveyor is suitable for chip handling on a milling machine, lathe, or machining center.

Kondisi: bekas, Wide-Gauge High-Lift Pallet Truck, Pedestrian Stacker, Electric Pallet Truck HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Wide-Gauge Pallet Truck Serial no. Year of manufacture: 2014 Rated capacity (pallet truck): 1,000 kg Capacity (special attachment GIESLER): 200 kg Nominal lift height: 1,600 mm Fork length: 530 / 770 mm Fork carriage width: 950 mm Underride height of outriggers: 130 mm Operating voltage hydraulic unit: 12 Volt Height: 2,160 mm Overall length: 1,650 mm Overall width: 1,860 / 1,200 mm - Manual propulsion - Electro-hydraulic lifting mechanism - Adjustable track width from 950 to 1,650 mm (distance between the outriggers) - 1 battery 12 Volt - Separate charger 12 Volt, 15 Ampere Bwedpfx Ashxvuwequot - Fork carriage at the mast made of steel - Fork carriage special attachment GIESLER, load capacity 200 kg - Fork carriage made from aluminium plate with precision guidance, lateral adjustment via clamping lever - Fork tines made of stainless steel, overall length 770 mm up to the swivel plate - Fork tines cannot be lowered to the floor due to the special attachment (approx. 170 to 250 mm depending on track width) Own weight: 485 kg as new condition

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, tegangan masuk: 400 V, lebar total: 580 mm, panjang total: 840 mm, tinggi total: 1.380 mm, berat kosong: 250 kg, daya: 2,2 kW (2,99 hp), jenis penyesuaian ketinggian: mekanis, New machine with 24-month warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital controls + 10 speeds with constant power transmission + Includes ingredient chute and stainless steel safety guard + Machine immediately shuts off when the guard is lifted + Integrated dust/splash protection cover + Machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift operated by lever + Bowl support arms made of stainless steel + Enclosed planetary gear drive made of stainless steel + Can also be operated with optional 20-litre equipment + Fast spare parts supply within 1-2 working days STANDARD accessories, included in price: - 1x 40-litre stainless steel bowl - 1x whisk for 40-litre bowl - 1x flat beater for 40-litre bowl - 1x dough hook for 40-litre bowl OPTIONAL accessories, available at extra cost – prices on request: - Additional 40-litre stainless steel bowls - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 40-litre bowl - 20-litre equipment (1x 20-litre stainless steel bowl + 3 tools for 20-litre bowl) Technical data: Bwjdpfx Aqehydl Douot - Motor power: 2.2 kW - RPM at 50Hz: 125 - 424 (speed levels 1 to 10) - Fusing: 16A CEE plug - Electrical connection: 400V - 3Ph - 50Hz - Dimensions: 580 x 840 x 1380 mm (W x D x H) - Maximum height 1650 mm with hood open - Net weight: 250 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 78 kW (106,05 hp), jenis bahan bakar: diesel, Tahun pembuatan: 1992, jam operasional: 10.027 h, Perlengkapan: kabin, Tyre size: 10.00-20 Bwodpfxsrvgyxo Aqust Lifting speed: 66 m/min Operating weight: 22,000 kg Load hook: 20,000 kg Boom configuration: Upper section 3,500 mm / Lower section 3,500 mm / Extension piece 3,000 mm / Extension piece 1,500 mm Base unit: with 4-point sliding beam support Engine manufacturer / type / output: Deutz / F6L 912 / 78 kW Max. lifting capacity: 25,000 kg Boom length: 11,500 mm

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Attention - Do not purchase used metallography equipment! Anyone familiar with metallography knows: “used” unfortunately means “worn out”: Unless these machines are thoroughly cleaned every day, their heavy workload will lead to total failure within just a few years. The ECOPRESS 102 is a fully automatic hot mounting press with an electrohydraulic pressure system, so no separate compressed air connection is required. Operating pressure reaches up to 300 bar and embedding temperature up to 200°C. The embedding time is programmable up to 60 minutes. Due to the fully automatic cycle and integrated automatic cooling, short cycle times are achieved: Thermostatically controlled heating and cooling times, 1650 W heating power, automatic cooling cycle. The ECOPRESS 102 mounting press is supplied with a pressing cylinder and a piston (option: intermediate piston for two samples) with diameters of 25 / 30 / 40 / 50 mm (and inch sizes). (The ECOPRESS 202 comes with two mounting cylinders.) The end of the mounting cycle is indicated by an acoustic signal. The delivery includes everything ready for operation (including the pressing cylinder, piston, and intermediate piston for two samples required for your application). Required connections: 230V / 50 Hz, single phase (220V), water inlet and outlet. * 1650 watts heating power * up to 200° C embedding temperature * embedding time adjustable up to 60 minutes * automatic cooling cycle * no compressed air required * 12-month warranty Includes a selection/sample pack of consumables comprising: * 5 x 1 kg (5 kg) of various mounting resins * Release agent (400 ml) Bwedocwamxepfx Aqust Delivery by freight forwarder, free within Germany (ex works). Option: On-site installation by our technicians.

Tahun pembuatan: 2009, Kondisi: baik (bekas), roller conveyor, roller table, powered roller conveyor, roller track - robust design - electrically powered - servo motor: type: 1FK7032-5AK71-1PG0, 49 rpm - roller width: 1450 mm - conveying length: 1500 mm - roller diameter: 105 mm Bwjdpfx Aqjb A Sazeuot - rollers: rubber-coated - shaft diameter: 25 mm - conveyor height: 950 mm, adjustable - drive: belt-driven - dimensions: 1500/1650/H950 mm - weight: approx. 230 kg

Tahun pembuatan: 2009, Kondisi: bekas, Powered roller conveyor, roller track, driven roller conveyor, conveyor line - Robust construction Bjdpfxeb A Sxws Aqujwt - Mobile design - Electrically driven - Drive motor: 0.18 kW, 76 rpm - Roller width: 1500 mm - Conveyor length: 1400 mm - Roller diameter: 105 mm - Rollers: rubber-coated - Shaft diameter: 25 mm - Conveyor height: 1100 mm, adjustable - Driven via belt - Dimensions: 1400/1650/H950 mm - Weight: approx. 230 kg

Tahun pembuatan: 2009, Kondisi: baik (bekas), Turntable conveyor, roller conveyor, driven roller conveyor, conveyor system, roller conveyor with discharge feeder - Sturdy construction - Electrically driven - Conveyor roller drive motor: 0.37 kW, 71 rpm - Conveyor belt drive motor: 0.37 kW, 88 rpm - Roller width: 1440 mm - Conveying length: 1400 mm - Transfer conveyor belt: 1400 mm Bwodpob A Hdkofx Aquet - Pneumatic lifting - Roller diameter: 105 mm - Rollers: rubber-coated - Shaft diameter: 25 mm - Conveyor height: 950 mm, adjustable - Driven via timing belt - Dimensions: 1450/1650/H1000 mm - Weight: 420 kg

Tahun pembuatan: 2009, Kondisi: baik (bekas), Roller conveyor, roller track, powered roller conveyor, rollerway - Design: robust Bwsdpfx Aqeb A S Udeuot - Drive: electric - Drive motor: 0.37 kW 76 rpm - Roller width: 1450 mm - Conveyor length: 2150 mm - Roller diameter: 105 mm - Rollers: rubber-coated - Shaft diameter: 25 mm - Conveyor height: 950 mm, adjustable - Driven: via belt - Dimensions: 2150/1650/H960 mm - Weight: approx. 320 kg

Tahun pembuatan: 2009, Kondisi: baik (bekas), Powered roller conveyor, roller track, driven roller conveyor, roller conveyor Bwjdpfeb A S Ugex Aquet -with rotary unit, can be rotated via servo motor -robust design -electrically driven -drive motor: 0.37 kW, 76 rpm -roller width: 1450 mm -conveying length: 1400 mm -roller diameter: 105 mm -rollers: rubber-coated -shaft diameter: 25 mm -conveying height: 950 mm, adjustable -driven by: belt -dimensions: 1400/1650/H960 mm -weight: approx. 300 kg

Tahun pembuatan: 2009, Kondisi: baik (bekas), Roller conveyor, roller track, powered roller conveyor, roller path - Robust design - Electrically powered - Drive motor: 0.18 kW, 76 rpm - Roller width: 1500 mm - Conveyor length: 1400 mm Bodpfx Aob A I H Soquswt - Roller diameter: 105 mm - Rollers: rubber-coated - Shaft diameter: 25 mm - Conveyor height: 1100 mm adjustable - Powered: via belt drive - Quantity: 7 roller conveyors available - Price: per unit - Dimensions: 1400/1650/H950 mm - Weight: approx. 230 kg/unit

Kondisi: bekas, Roller conveyor, conveyor track, roller conveyor belt, roller track - Roller conveyor: non-driven, length 1.65 m on a heavy-duty, height-adjustable base frame - Roller width: 400 mm - Roller diameter: 57 mm - Roller pitch: 195 mm - Height: 655 to 1140 mm, one support leg missing - Transport dimensions: 1650/500/H655 mm Bwodpfx Ajqzl Hmjqujt - Weight: 27 kg

Tahun pembuatan: 1989, Kondisi: bekas, Overall length approx. 3500 mm Belt width approx. 700 mm Conveying height approx. 1200 mm Discharge height approx. 1200 mm Weight approx. 800 kg Space requirement approx. 3500 x 1300 x 1650 mm Bwjdpfx Aqera Rrtjuot

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, Plotter pemotong Baumann, termasuk destacker Baumann BB7L, plotter pemotong Baumann Wohlenberg 168, dan stacker Baumann BA7P Fitur Pemotong Guillotine Wohlenberg 168 * Input maks.: 1250 x 1650 mm * Tinggi masuk: 165 mm Fitur Destacker Baumann BB7L & Stacker BA7P Tinggi tumpukan maks.: 1800 mm Bedpfsub Sbrjx Aquswt Berat maksimum di meja: 300 kg Dimensi maks. (destacker): 1450 x 1650 mm Dimensi maks. (stacker): 1250 x 1650 mm Tinggi palet min.: 140 mm

Kondisi: bekas, TECHNICAL DATA - Pressure: 4 [t] - Number of uprights: 2 - Fixed table dimensions: 210 x 210 [mm] Bwodpfxouhahmo Aqujt - Rigid press frame - Hole Ø in table: 80 [mm] - Number of strokes: 50 - 150 [spm] - Adjustable slide: 40 [mm] - Fixed stroke: 27 [mm] - Max. tool height: 148 [mm] - Longitudinal clearance between uprights: 230 [mm] - Max. part diameter after regrinding: 30 [mm] - Max. part thickness after regrinding / cutting: 1.5 / 2 [mm] - Voltage: 380 [V] - Installed power: 4.5 [kW] - Required space: 1100 x 1100 x 1650 [mm] - Weight: 500 [kg]

Kondisi: baru, N0555 Bodeui Rpxjpfx Aquowt Marke: TOMAR Modell: BELLAGIO Verschließbarer Doppelquer-Trocknungswagen zum Trocknen von Lackierungen, Platten, Leisten, Rahmen und diversen Materialien Minimale Distanz zwischen den Ständern: 300 mm Maximale Distanz zwischen den Ständern: 2600 mm Armlänge pro Seite: 780 mm Nutzabstand zwischen den Armen: 120 mm Anzahl der PVC-beschichteten Ablagen: 20 Tragfähigkeit: 300 kg Anzahl der Lenkrollen für den Transport: 4 (davon 2 mit Feststeller) Transportgriff vorhanden Abmessungen gesamt: Trolley geschlossen: 1500 x 400 x 1900 mm (Höhe) – Trolley maximal geöffnet: 1650 x 3000 x 1900 mm (Höhe) Transportabmessungen: 1500 x 400 x 1900 mm Gewicht: 115 kg

Kondisi: bekas, nomor mesin/kendaraan: 007276, Max. panel width: 800 mm Max. panel length: 2500 mm Bsdpfxot H Tx De Aquowt Max. height of panel stack above ground: 1650 mm Lifting capacity: 4500 kg

Kondisi: bekas, Tahun pembuatan: 1967, Grinding length 1650 mm Bjdpjtt S Uajfx Aquowt Grinding width 700 mm Workpiece height 600 mm Table clamping area 1500 x 500 mm Table speed 0 - 20 m/min Cross feed automatic 0 - 20 mm/stroke Grinding spindle speed 2000 rpm Grinding wheel diameter 300 mm Total power requirement 19 kW Machine weight approx. 5 t Machine dimensions (L x W x H) 5.92 x 3.12 x 2.65 m Accessories: 2 magnetic chucks each 750 x 600 mm, grinding wheel with flange, various grinding wheels and flanges supplied separately, wet grinding unit

Tahun pembuatan: 1998, Kondisi: baik (bekas), nomor mesin/kendaraan: 0159488169537, offer-23293-EN Bjdpfx Aqspuy H Djujwt