Beli Haulick & Roos Menekan Kolom Ganda Tekan Otomatis bekas (12.789)

Tahun pembuatan: 2017, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Překlad: Ppedpfx Ansrt Tw Dswjt Lis byl v provozu od 3/2017 do roku 2022, kdy byl odborně demontován. Je uskladněn ve střeženém skladu v Kirově, Rusko. Lis byl provozován maximálně 6 dní v týdnu ve dvousměnném provozu. Na tomto lisu bylo vyrobeno více než 60 000 velkých umyvadel. Cena: 280 000 EUR. Vlastníkem lisu je společnost Dřevojas, Česká republika. Pořizovací cena nového stroje byla 456 000 EUR. Rozměry: Šířka: ~4920 mm Délka: ~14020 mm Výška: ~3085 mm Hmotnost: ~45 t (pojezdový vozík na produkty a formy nejsou součástí dodávky) Maximální rozměr formy: 1000 mm x 1700 mm x 650 mm Maximální počet forem: 8 horizontálních nebo 12 vertikálních Energie: 380 V Vzduch: 16 bar Voda (45°C): min. 4 bar Voda (70°C): 3–4 bar

Kondisi: baik (bekas), Pharmatec 500-S4 unit distilasi kolom tekanan multi-tahap. Terbuat dari stainless steel, dirancang untuk produksi air injeksi steril, non-pirogenik (WFI), seluruh sistem dipasang di atas skid, sistem empat kolom, pemanasan uap bertekanan 660 l/jam, 4 bar, kontrol yang dapat disesuaikan, 3 fase. Pedpfx Aneyfhtnewept

Kondisi: bekas, Tahun pembuatan: 2010, Pressure: 600 t Frame gap: 3640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1550 mm Side frame opening: 2200 mm Bolster area: 3600 x 2500 mm Ram area: 3600 x 2500 mm Ram adjustment: 400 mm Strip width: 2000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1600 x 2.5 mm² Coil weight: 35.0 t Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blanking line / cut-to-length line (press, coil line, blank stacker) Year of manufacture: 1993 - 2010: new Siemens S7 control system - Schuler press, EBS 4-600-3.6-350 with steplessly adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection on ram, pneumatic ram counterbalance, motorized ram adjustment, ram locking Sliding table (2x) without rails for transfer table - Schleicher decoiler, HE - 355 - 2100, year 1994 with auxiliary drive, pressure device, traversable - Coil loading station - Schleicher take-off device - Scrap shear - Schnutz straightener, type RME 18/50/13-2000 TZ, year 1994 with steplessly adjustable drive, 30 intermediate rollers, 117 support rollers - Loop bridge Ppedpfovut Dyjx Anwot - Schleicher roller feeder, type WV-SYS-A 160-2000, year 1994 Blank stacking system / NSM magnettechnik destacking unit Disassembled and stored - video from supplier prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 1991, Pressing force / t Sheet thickness / mm Ppsdpewgi S Nefx Anwst Strokes / strokes/min Condition: used The punching machine operates flawlessly. A demonstration video is available.

Kondisi: bekas, Tahun pembuatan: 1999, hidraulis ya kekuatan tekan 100 t Ppjdpfsx U A Tvox Anwjt berat mesin sekitar 2,9 t

Kondisi: bekas, Tahun pembuatan: 2003, de-001 Ppsdpfew Syfcjx Anwjt

Kondisi: bekas, Tahun pembuatan: 1960, Tekanan 1000 t Ppjdpfjw Syd Eex Anwst Langkah 600 mm Berat mesin sekitar 4 t

Tahun pembuatan: 1994, Kondisi: siap digunakan (bekas), Table dimensions: 1200x700 mm, stroke: 140 mm, connected load: 12 kW, length: 1770 mm, width: 1250 mm, height: 3700 mm, weight: 13.2 t, operating hours counter: 39,671 h, supplied with documentation, an on-site inspection is possible. Pedsnxk I Rspfx Anwspt

Kondisi: bekas, Tahun pembuatan: 1996, Technical details: Pressing force: 6.3 t Throat depth: 170/180 mm Ppodstxdmwopfx Anwet Stroke: 310 mm Drive power: 3 kW Installation height: 775 mm Approx. machine weight: 1.5 t Clamping table: 470 x 330 mm Table height above floor: 800 mm C-frame design 1 station

Kondisi: bekas, Tahun pembuatan: 1992, Pressure: 75 t Throat depth: 280 mm Stroke: 303 mm Total power requirement: 15 kW Machine weight approx.: 7,000 kg Space requirement approx.: (dimensions unspecified) Hydraulic single-column press, Type HZS 75 Year of manufacture: 1992 Serial no. H 92-2249 _____ Ram pressing force: 75 t Table size: 750 x 515 mm Table height above floor: 820 mm Through-hole in table: 300 x 200 mm Maximum installation height: 500 mm Pedpfx Aot Hwrzsnwept Throat depth: 280 mm Ram stroke: approx. 303 mm Ram area: 500 x 400 mm Ram bore: 50 mm Main drive: approx. 15 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Total machine height: 3,850 mm Accessories / Special equipment: - DUNKES program control Type PC 10 with data input field for pressure setting, pressure/time switching, top/bottom stroke, rapid traverse and working speeds, including digital display of pressing force, ram travel, pressing time, program number. Storage for up to 30 tool programs, Siemens S5 PLC, teach-in button - Press ram guided over adjustable prism guides - Hydraulic stroke cushioning mounted in the press cylinder, 15 mm - Motorised depth stop and stroke cushioning adjustment - Double sheet detection: Maximum pressing force only after reaching preselected position - Hydraulic tool clamps (4) on the table, hydraulic pin clamping on the ram, hydraulic ejector in the ram, 3 t/15 mm - Safety two-hand control, electrical and stepless return stroke limitation - Overrun monitoring devices NKS, ram switching for the upper piston - Mounted control cabinet, connection for oil cooler, etc.

Kondisi: bekas, Tahun pembuatan: 1990, Pressure: 25 t Throat Depth: 250 mm Stroke: 100 mm Podpet Hw Ezsfx Anwept Total Power Requirement: 7.5 kW Machine Weight: approx. 3,200 kg Space Requirement: approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC-Controlled Hydraulic C-Frame Press Model: HZS 25 Year of Manufacture: 1990 Serial No.: H 90-2018 ----- Ram Force (Upper Ram): 25 t Table Size: 620 x 460 mm Table Height Above Floor: 820 mm Through Hole in Table: 100 mm Maximum Installation Height: 350 mm Throat Depth: 250 mm Ram Stroke: approx. 100 mm Ram Surface: 500 x 350 mm Ram Bore: 32 mm Working Speeds: Rapid Traverse Up/Down: 400/400 mm/s at Partial Load / at Full Load: 50 / 18 mm/s Total Drive: approx. 7.5 kW - 380 V – 50 Hz Weight: approx. 3,200 kg Machine Dimensions: 1,000 x 1,700 x 2,600 mm Accessories / Special Equipment: • DUNKES program control type CNC 100 with data entry panel for adjusting pressure, pressure/time switching, upper/lower stroke, rapid and working speeds, as well as digital display of pressing force, ram travel, pressing time, program number. Storage for up to x tool programs, SIEMENS S5 PLC, Teach-In button. • Hydraulic shock absorber mounted in the press cylinder. • SICK light curtain and safety two-hand control. • Intermediate tables mounted, attached control cabinet. • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm. Condition: good to very good – powered and ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice We look forward to receiving your order. A further selection of hydraulic presses is always available in our warehouse – please contact us for more information.

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Kekuatan tekan 5.000 kN Luas meja 2.400 mm x 1.700 mm Luas stempel 2.400 mm x 1.400 mm Langkah dapat disesuaikan 25 mm - 200 mm Penyesuaian stempel maks. 200 mm Jumlah langkah 20 - 100 /menit Daya penggerak 84 kW Berat mesin sekitar 62.500 kg Pjdpfoyg Emzjx Anwspt Dengan kombinasi feeding roller-straightener + decoiler Data dan gambar lebih lanjut atas permintaan

Kondisi: bekas, Tahun pembuatan: 1961, druck-025-t-technik Ppedpfexukpcjx Anwot

Kondisi: baru, Tahun pembuatan: 2026, de2hu_001 Psdpoyfwywsfx Anwopt

Kondisi: baru, Tahun pembuatan: 2026, de-hu-001 Ppedpeyfwxtefx Anwst

Kondisi: bekas, druck-2-t-ausladung-150-mm-hub-150-mm-tischflache-310-x-250-mm-a ntriebsleistung-2-0-kw-maschinengewicht-ca-0-6-t-raumbedarf-ca-1- 2-x-0-8-x-1-7-m-einstanderpresse-mit-tischuntergestell-verschiede s-pressenzubehor Ppodpfx Aetzv Hmsnwet

Tahun pembuatan: 2022, Kondisi: baru, Hydraulic press 6 m automatic for lignum mini finger joint line Used 2022 Make: Hydraulic press 6 meters automatic for lignum line joining Model: Hydraulic press 6 meters automatic for lignum line joining Description: Hydraulic press, 6 meters, automatic, designed for the lignum mini finger joint line. INPUT TRANSPORT, automatic output conveyor, automated process. For more information, please send an email. Year: Ppsdjimwx Eepfx Anwst 2022

Kondisi: bekas, Tahun pembuatan: 1968, Pressure 40 t Outreach 200 mm Stroke 150 mm Table area 600 x 300 mm Through-hole in table, diameter 140 mm Ram area 600 x 300 mm Installation height approx. 325 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Pjdpfx Ansu Dn Showopt 2 guide columns 2 parallel T-slots in ram and table, transverse

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler Pedpfsd Nl E Ujx Anwspt - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Tahun pembuatan: 1971, Kondisi: bekas, Pressure: 160 t Throat Depth: 440 mm Stroke: 20 - 120 mm Table Surface: 1050 x 750 mm Strokes per Minute: 42 and 62 spm Ram Surface: 800 x 500 mm Pin Hole (Depth x Diameter): 85 x 50 mm Through Opening in Table: 355 mm Installation Height (Stroke Down, Ram Adjustment Up): 455 mm Ram Adjustment: 100 mm Machine Weight approx. 11.2 t Ppjdpfxjcyc Ado Anwot *with gear drive *with fixed work table *with enlarged table and ram surfaces *with increased throat depth *with body pass-through *with ram weight compensation The machine is currently being overhauled, and the clutch is being dismantled for this purpose. (Current condition: press is disassembled)

Kondisi: baru, Pressure: 40 t Outreach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Podpfsb U Hwmjx Anwspt Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Kondisi: baru, Pressure: 25 t Reach: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Strokes per minute: 160 spm Ppjdpfxsb U Hwpo Anwet Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in the table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight: approx. 1.9 t Space requirement: approx. 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Tahun pembuatan: 1977, Kondisi: bekas, Pressure 40 t Outreach - mm Stroke 8 - 90 mm Table dimensions 630 x 430 mm Ram adjustment 60 mm Max. strokes per minute 65 Total power requirement kW Machine weight approx. 2480 kg Space requirement approx. m - Gear train - Tiltable - Table clamping plate - Mechanical overload protection in the ram (shear plate) Ppsdpsb U Hxfofx Anwst - Pneumatic clutch

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 100 t Throat depth: 260 mm Stroke: 300 mm Table size: 500 x 500 mm Ram dimensions: 650 x 500 mm Installation height: 700 mm Oil capacity: 600 l Ejector in table: 40 t Return force: 13 t Total power requirement: 22 kW Machine weight: approx. 7 t Space requirements: approx. 2.07 x 2.48 x 3.3 m - Table ejector, pressing force 40 t, stroke 100 mm - Sideways movable work area protection with BWS (safety light curtain), with cycle operation - Cooling system behind the machine, collecting tank (beige), air cooler (grey-blue), including complete piping and controls, etc. - Press certified for unrestricted manual loading operation - Last safety inspection/approval (UVV): Nov 2013 Psdpsb U Hvaofx Anwjpt - Documentation available Demonstration under power not possible. Sale in as-is condition, no known defects. Due to the control system, commissioning by qualified personnel is recommended.

Kondisi: bekas, Tahun pembuatan: 1984,