Beli Heraeus Ruang Uji Kejut bekas (14.528)

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Perakitan dan Jalur Pengujian Motor Mobil Listrik (2021) Dirancang untuk memproduksi motor EV dengan daya 180–300 kW Meliputi operasi manual, semi-otomatis, dan otomatis Waktu siklus: 86 detik Stasiun & Peralatan Pemuatan komponen - Robot KUKA KR15 R2700-2/FLR (2021) - Masukan material - Pemanasan rumah bagian dalam dengan koil induksi hingga 240 °C - Penekanan stator ke dalam rumah - Press TOX 1T - Keyence CA-DQP25X - Terowongan pendingin - Pendinginan hingga 24 °C - Waktu siklus: 600 detik Perakitan X-ring dan D-ring pada housing dalam - Pemasangan seal X-ring dan D-ring ke housing - Tersedia alat perakitan khusus berbentuk bulat Pra-perakitan housing luar - Penyekrupan flange ke housing dengan obeng Bosch Rexroth ESA013G-G0 - Penyambungan otomatis housing dalam dan luar Perakitan housing luar - Press TOX EQK 030 3T - 2x scanner Cognex - 2x Kamera Keyence V3 - 3x sistem kamera VS Magnetisasi dan pengukuran rotor - Magnetisasi magnet - Magnetizer MagSys MC3K82 (2020) - Fixture magnetisasi MFFer8/160/250 Pra-perakitan pelindung A dan pemasangan rotor - Penekanan bearing rotor dan resolver - Press TOX 3T Pemasangan pelindung A ke housing luar - Press TOX EQK 1T - Penyekrupan pelindung A ke housing luar dengan obeng pneumatik (5 Nm) Pengencangan komponen terpasang - Pengencangan dengan obeng Rexroth 4GE59 - Sistem manipulator Handyflex 400 Koneksi inter-connector - Pemasangan manual inter-connector dan tabung isolasi Pemasukan counter ring, perakitan cover pendingin & ventilasi - Press TOX EQK 030 3T Pemasangan cover pendingin rotor - Penyekrupan dengan torsi 4 Nm Jalur pengujian elektrikal end-of-line (EOL) - 5x penguji Deutronic, meliputi: - Penguji tegangan tinggi ETL ATS 400 - Penguji resistansi HIOKI RM3545 - Analyzer EOL Reilhofer Stasiun pemutusan inter-connector - Pemutusan inter-connector - Pemasukan 2 sekrup dan penyekrupan dengan obeng Rexroth (13 Nm) - Sistem manipulator Handyflex 300 - Kontrol washer - Rotasi motor Pengujian kebocoran - 2x stasiun uji kebocoran dengan tester Innomatec LTC-902 - Pengujian kebocoran vakum dan overpressure - Jumlah yang diuji: ±50.000 unit per stasiun Rotasi, penandaan laser, stamping, engraving & inspeksi - Mesin stamping ADT - Laser Arex 450 - Sistem kamera Keyence CA-H - Pembaca Datalogic CBX 100 - Jumlah yang diuji: ±130.000 unit Bedpozhub Aefx Am Eswp Perlindungan selama transportasi - Pemasangan tutup/pelindung dan plug kuning - Pemasangan tutup pelindung dan penguncian lubang secara manual Pengemasan & pemeriksaan akhir - Manipulator Dalmec (2022)

Kondisi: sangat baik (bekas), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell material testing machine designed for professional tensile and compression testing of materials and components. This machine is suitable for metals, plastics, rubber, and many other materials, and is typically used in laboratories, quality assurance, research, and education. Control is via PC with Zwick/Roell testXpert III software (media & documentation included). Technical data: Nominal test force: 20 kN Test direction: tension & compression Mains supply: 230 V / 50–60 Hz / single-phase Bwedjzimgtopfx Am Esp Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (from documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Test direction: tension & compression Max. test frequency: 0.5 Hz Traverse: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Total height: approx. 1,545 – 2,114 mm (depending on traverse position) Total width: approx. 856 mm Total depth: approx. 650 mm Test area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical equipment Electrical Data Mains supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug type: Schuko (CEE 7) Measuring & Control Electronics Internal data acquisition: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection: IP32 Important notice: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC – see photos for condition) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (data media) Original operating and technical documentation Assorted connection and interface cables (Changes and errors in technical data and specifications reserved!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), CTS Model: CSR-60/810/S Air-cooled Temperature and Climate Conditioning Unit CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system manufactured by CTS GmbH, comprising a conditioning unit (type CSR-60/810/S) and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications—for example, automotive, electronics, component, or material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system by CTS GmbH, consisting of: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance/lifetime testing). Technical Data (per nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Bwjdpfxszimgas Am Esp Refrigeration System: Refrigerant: - Pre-cooling stage: R452A (17.0 kg) - Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 | Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (WxDxH): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (WxDxH): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information: The following work is performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change. Errors excepted.) We are happy to answer further questions by phone.

Kondisi: bekas, imv-i240-en Bedpozimf Aefx Am Eewp

Kondisi: bekas, SincoTec Type: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-Hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The system is from industrial use and was fully functional until decommissioning. Service and maintenance have been carried out professionally. Comprehensive technical documentation (operating, assembly, and wiring manuals) is included. The test stand is suitable for tensile/compression tests, torsion tests, as well as combined load tests on components and assemblies, e.g., for fatigue, lifetime, and functional testing. Key Technical Data – Test Stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Maximum torque (torsion): ±4,000 Nm - Maximum stroke of linear actuator: ±75 mm - Maximum rotation angle: ±50° Bjdpfx Amszimcbo Eewp - Measurement accuracy: Class 1 (DIN EN 10002-3) Test Stand Dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. specimen fixture weight: 250 kg Hydraulic Power Unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank volume: approx. 1,500 liters Power Unit Dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical Data: Control Cabinet / Test Stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fuse protection: 16 A Hydraulic Power Unit - 400 V / 50 Hz three-phase - Fixed connection - Fuse protection: approx. 160 A Scope of Delivery - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is designed for up to 150 kN. The specification of 125 kN refers to typical operating range. Test stand weight: approx. 4.7 t Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications and technical details subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: bekas, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Bench – Fully Functional Bsdpfx Amszimb Do Eowp Description: For sale is a SincoTec Power Flow servo-hydraulic test bench from an industrial environment. The system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering, or research sectors. Technical highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Operated via SincoTec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Bench: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Overall test bench height: approx. 3.30 m Hydraulic power unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully operational prior to disassembly. Power supply / Electrical (from nameplates): - Individual units / motors:  230 V / 50 Hz - Leakage oil pump: 0.18 kW / 1.5 A  400 V / 50 Hz (three-phase) - Traverse: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) Further questions can be answered by phone.

Kondisi: bekas, 1 Bodpfxezil Upe Am Eswp

Kondisi: bekas, Zwick Tipe: HA 50 Dimensi: T 2685 mm x L 1040 mm x D 750 mm Luas area penempatan: 1600 cm² Bwedszil Uijpfx Am Ejp Data teknis: Fmax: 50 kN Vmax: 1500 mm/s Ruang kerja tinggi max 1370 mm Ruang kerja lebar 565 mm Aksesori: Sensor gaya Kistler 50 kN via NI-Labview Unit hidrolik 280 bar Luas area penempatan: 415 cm² Alat penjepit / penahan sampel tersedia (Flensa universal, rahang ekstra kuat untuk penahan sampel) Komputer + perangkat lunak testXpert R V6.0.0 Kondisi: bekas Ruang lingkup pengiriman: (lihat gambar) Berat sekitar 1200 kg tanpa rangka dll. (Perubahan dan kesalahan data teknis dimungkinkan, spesifikasi dapat berubah!) Untuk pertanyaan lebih lanjut, silakan hubungi kami melalui telepon.

Kondisi: bekas, Zwick Tipe: Z30 Data teknis: Tinggi total: 2114 mm, lebar: 748 mm, kedalaman: 580 mm Fmax: 30 kN Vmax: 125 mm/dtk Aksesori: Ekstensometer ClipOn 13,5 mm Ekstensometer ClipOn 40 mm Komputer + perangkat lunak testXpert II V3.5 Berat total: sekitar 500 kg Kondisi: bekas Ruang lingkup pengiriman: (lihat gambar) Bjdpfxezil Ucj Am Eewp (Perubahan dan kesalahan dalam data teknis dan spesifikasi dapat terjadi!) Untuk pertanyaan lebih lanjut, silakan hubungi kami melalui telepon.

Kondisi: sangat baik (bekas), en-Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Chamber This unit is used to test the ingress of water into enclosures. Bjdpozil T Esfx Am Eswp In conjunction with a time switch, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Compliant with DIN VDE 0470 T1 and EN 60529 for protection class tests to IPX3 and IPX4. Integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and exchangeable nozzle holders - Adjustable and measurable water flow rate - Programmable test duration Mechanical load specifications: Maximum test load (evenly distributed): - Permissible test sample weight for carrier (total): 25 kg - Spray radius: 200 mm / 400 mm Specifications for IP protection class testing: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ± 60° - Oscillation angle IPX4: approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see images) (Subject to technical modifications and errors. All information without guarantee!) For further questions, please contact us by phone.

Kondisi: bekas, rms-vibration-test-system Bodjzikdcspfx Am Eswp

Kondisi: bekas, Spesifikasi teknis (Tipe produsen/model – tanpa jaminan): Daya puncak: "sesuai keterangan produsen" sekitar 10 kN Akselerasi maks.: "hingga sekitar 1.000 m/s²" Kecepatan maks.: "biasanya sekitar 1 m/s hingga beberapa m/s" Komponen: Lemari kontrol TGA 022/3 Penggetar SW 6507 Amplifier daya TG D 9000-000.00 Blower Kondisi: bekas Lingkup pengiriman: Sistem uji getaran seperti pada gambar (Perubahan dan kesalahan dalam data teknis tetap dimungkinkan!) Bjdpfx Ajzikc Ssm Eewp Pertanyaan lebih lanjut dapat kami jawab dengan senang hati melalui telepon.

Kondisi: sangat baik (bekas), zwick-bt1-fr050th-a1k-50kn-material-testing-machine-used Bodpfx Amszii Ugj Eswp

Kondisi: sangat baik (bekas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C, Water-Cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well-maintained. Chamber Volume & Internal Dimensions: Test volume: 60 liters Interior basket/test space (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min Single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lifting System: Basket/lift system load: 20 kg maximum load Transfer basket protected by safety grilles on all sides Additional Features & Specifications: Noise level: approx. 58 dB(A) in operation Control: touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A External circuit protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg For your safety as a buyer, please note the following information! The following measures are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components Bjdpjzii A Refx Am Eowp 2. Recharge with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Kondisi: bekas, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer maintenance performed General Information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance regularly performed by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance documentation available - Ideal for research, testing, and development applications Technical Specifications – Test Bench Feature / Value Total height (test bench): 1215 mm (without clamping device) Width (test bench): 2005 mm Depth (test bench): 1205 mm Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy: min. Class 1 (DIN EN 10002-3) Technical Specifications – Control Cabinet Feature / Value Total height (control cabinet): approx. 1800 mm Height of worktop: 1080 mm Width (control cabinet): 650 mm (narrow worktop) / 1450 mm (wide worktop) Depth (control cabinet): 700 mm (narrow worktop) / 800 mm (wide worktop) Weight: 152 kg (small worktop), 187 kg (large worktop), with (granite plate) 247 kg Site Requirements Feature / Value Required footprint: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load capacity: 234 N/cm² Electrical Requirements Feature / Value Voltage: 400 V three-phase with neutral conductor and protective earth Phase sequence: clockwise Voltage fluctuation: ≤ ±10 % Short term interruptions: < 20 ms EMC limit: Interference level A according to VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / grounding resistance: < 0.3 Ω Connection and Protection Feature / Value Bwjdpezii A Defx Am Ejp Power supply: 400 V / 50 Hz (clockwise phase sequence) Connection plug: CEE socket, 5-pin, 16 A Protection: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to change and errors in technical data. All information is subject to confirmation!) If you have any further questions, please feel free to contact us by phone.

Kondisi: bekas, SincoTec Type: Exciting Mot Resonance Test Bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a two-mass oscillator. It consists of an oscillation head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillation head is located in the upper part of the machine and generates the dynamic amplitude. The oscillation head is supported by preloaded compression springs on the upper crossbar and is guided centrally. The middle load drive is located in the lower part of the machine and applies the static preload via a geared motor and spindle drive. The specimen chamber is situated above the clamping table and is bounded at the top by the adjustable crosshead. Bodpjzii Awofx Am Eowp Control of the test bench is handled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and complies with protection class IP 50 according to EN 60529. Technical Data: General test bench data: Total height test bench: 1840 to 2240 mm Height of machine table: 1030 mm Width of test bench: 800 mm Depth of test bench: 1500 mm Specimen chamber height: max. 600 mm (without force transducer) Clear column passage: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Maximum oscillation amplitude: ±5 mm Test frequency: 30 to 110 Hz Transducer accuracy: at least Class 1 (according to DIN EN 10002-3) Test bench weight: approx. 1,880 kg Max. fixture weight: 150 kg General control cabinet data: Total height control cabinet: 1,900 mm Height of table top: 1,080 mm Control cabinet width: 650 mm Control cabinet depth: 700 mm Weight of control cabinet: 152 kg Color: RAL 9006 (White Aluminium), table top Midnight Site requirements: Space requirement: 2.5 x 2.5 m Required ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (clockwise rotation field) Connection plug: CEE connector, 5-pole, 16 A Fuse protection: 16 A Connection and environmental conditions Network conditions: Voltage: 400 V three-phase with neutral conductor and protective earth, clockwise rotation Voltage fluctuations: < ±10% Short-term voltage dips: < 20 ms Limits for continuous interference emission: Radio interference level A according to VDE0871 Frequency: 50 Hz ±1% Protective earth: earth resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; details are subject to confirmation!) Further questions are welcome by phone.

Kondisi: bekas, Liebisch KEA 300 Constanzo Fully functional condensation water test chamber for material and coating testing Description: The device is designed for performing condensation water and water vapor tests according to common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The construction is robust and low-maintenance, making it highly suitable for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Rated power: 1,400 W Chamber size: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: stainless steel, corrosion-resistant Control: none / manual operation Important note: "The table shown in the photos is not included in the sale." Bjdpfx Amszii Aqj Ejwp Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; specifications are subject to confirmation!) If you have any further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This device is used to test for water ingress into enclosures. When used with a timer switch, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Compliant with DIN VDE 0470 Part 1 and EN 60529 for testing according to protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features - Glass door with wiper Bwedozii Akepfx Am Eep - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and replaceable nozzle holders - Adjustable and measurable water flow rate - Test duration control Specifications for Mechanical Load Maximum load with test specimens (evenly distributed): - Permissible test specimen weight for tray (total): 25 kg - Spray radius: 200 mm / 400 mm Specifications for IP Protection Degree Testing - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ± 60° - Oscillation angle IPX4: approx. ± 180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the specifications!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality testing device for simulating sunlight and weathering effects. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp Type: Fluorescent UV lamps Temperature Range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV exposure, condensation, and spraying phases Humidity range: approx. 10% to 95% r.h. (relative humidity) at temperatures above approx. +10 °C Bsdpfx Aeziiz Hom Ejwp Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your peace of mind as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data may be subject to change and errors!) For further questions, please feel free to contact us by phone.

Kondisi: baik (bekas), TS -70/1000-10 Type For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: - Multi-touch control - USB and Ethernet interfaces - Feedthroughs for test cables 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1,000 liters Internal dimensions: Height approx. 1,000 mm, width approx. 860 mm, depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, width approx. 1,270 mm, depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Bwsdpfjziizyjx Am Ejp Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your safety as the buyer, please note! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) We are happy to answer any further questions you may have by phone.

Kondisi: bekas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-Cooled (converted to R-452a) Bwjdpfxeziizto Am Eep Temperature range: -70 °C to +180 °C Humidity range: 10–98% r.H. Test chamber internal dimensions (approx.): Height 870 mm / Width 1000 mm / Depth 1000 mm External dimensions (approx.): Height 1950 mm / Width 1200 mm / Depth 2220 mm Control cabinet (approx.): Height 2100 mm / Width 800 mm / Depth 400 mm Test chamber volume: 900 litres Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your security as a buyer, please note: The following points are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and error!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS climate test chamber type: C -40/600, air-cooled (retrofitted to use R-452A) Test chamber volume: 600 liters Temperature testing: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time in stabilized state - Average temperature change rate (without test specimen and without heat radiation): Heating: 2.5 K/min Cooling: 3.0 K/min - Max. heat radiation: 2500 W at +20°C Climate testing: - Climate range / Technical data: Temperature range: +10 °C to +95 °C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7 °C to +94 °C Dew point range II: –10 °C to +7 °C Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Test chamber dimensions (approx.): - Height: 850 mm - Width: 850 mm - Depth: 830 mm External dimensions (approx.): - Height: 1900 mm Bwsdpeziizgsfx Am Eop - Width: 1115 mm - Depth: 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Nominal current: 11.9 A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Tipe: VT 3050 Unit / Lemari Uji Lemari Suhu Pendingin udara Volume ruang uji 500 liter Kisaran suhu -30°C /+100°C Fluktuasi suhu waktu K ±0,5 Fluktuasi suhu ruang K ±1,5 Gradien suhu K 3 Kecepatan perubahan Pemanasan K/menit 2,0 Pendinginan K/menit 1,4 Kompensasi panas maks.W 650 Nilai kalibrasi +23°C +80°C Dimensi ruang uji Lebar 710 mm Kedalaman 590 mm Tinggi 1250 mm Dimensi luar Lebar 940 mm Kedalaman 1030 mm Tinggi 1955 mm Bwjdpfx Amsziizaj Esp Tingkat tekanan suara db(A)

Kondisi: sangat baik (bekas), de-fi Bjdpfx Asziiy Nsm Eowp

Kondisi: baik (bekas), 1 Bsdpfxeziixlj Am Eowp