Beli Kamar Uji Korosi, Pengujian Semprotan Garam bekas (3.648)

Tahun pembuatan: 1985, Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, Schenk-Trebel Materials Testing Machine Type RME 250 kN • Load frame and drive from Schenk Trebel, year of manufacture 1985, total height approx. 3.3 m. Traverse stroke approx. 2 m • Modernization around late 2003: Equipped with "testControl" control electronics from ZwickRoell • Upgrade 2010: Universal extensometer system MultiXtens from ZwickRoell, with pivot device and two pairs of measuring probes (photo), and new testControl module • Info: The testControl module is compatible with the current "testXpert III" software from ZwickRoell (one license for testXpert III version 1.51 is included in the price) • Temperature chamber (photo) that can be moved into the test area of the machine, year of manufacture 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable with liquid nitrogen down to approx. –40°C • Load cells: 250 kN and 50 kN (currently installed, photo of machine); additionally: 5 kN, 1 kN, and 500 N (photo) • 2 wedge specimen holders (photo) Iaodeyhb Rljpfx Afier Accessories (according to photos or the MultiXtens system) may be sold separately by arrangement. Condition of the machine The machine has been used for testing up to the beginning of 2026. The 50 kN load cell and the traverse displacement sensor were used for this purpose (both sensors: last calibration on 06.05.2024 incl. standard inspection). A defect in the servo amplifier for the drive (component in the testControl module) has frequently caused connection losses to the software and drive stoppages requiring hardware and software reboot since around autumn 2025. The servo amplifier or the entire testControl module must be replaced (cost information available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since then. The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units visible in the machine on the photos will be removed and remain with the supplier.

Tahun pembuatan: 2000, Kondisi: baik (bekas), Cieffe_FNCm_Kammerofen_DE Isdpenucguofx Afisar

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0325, gaya penekanan: 40 t, Tryout Press – Manufacturer Calende – 40 t For sale is a tool tryout press from Calende with a maximum pressing force of 40 t. The machine is equipped with a bolster and ram plate, each measuring 1,320 × 600 mm, a maximum working height of 700 mm, and is particularly suitable for tool tuning, assembly, and tryout work in tool and mold making. ==== Technical Specifications + Information: Tryout Press Calende – Tryout Press ==== General Information - Manufacturer: Calende - Model: Tryout Press - Design: Tool Tryout Press - Press force: 40 t - Machine weight: approx. 3.5 t - Dimensions (L × W × H): 2,065 × 700 × 2,905 mm ==== Working Area - Pass-through width: 1,000 mm - Max. working height: 700 mm - Stroke: 400 mm - Table height above floor: approx. 750 mm ==== Table and Ram - Table plate: 1,320 × 600 mm - Ram plate: 1,320 × 600 mm - Column diameter: 100 mm ==== Forces - Return force: 4 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Fast return speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 8 kW - Oil tank: 200 l - Electric oil cooling: 1.5 kW ==== Options - Hydraulic unit and tank mounted on top of the press: €2,400 - Surrounding maintenance platform: €3,600 - Siemens S7-1200 control: €4,600 - Floor tray made of painted steel: €850 ===== Tool tuning, tryout, tool assembly, mold making, toolmaking, press tool inspection, tryout operations. Tryout press, Tryout Press, Tool Tuning Press, Tool Try Out Press, Tryout Press, Tryout Press, Tool Testing Press, Hydraulic Press Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in compliance with German machinery guidelines, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with all points of the Brazilian national safety directive NR 12, which builds upon these standards. Our core strength lies in special purpose machine construction and press automation. We offer custom-tailored hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers. Iasdpfxefxykwj Afier

Tahun pembuatan: 2024, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Systemübersicht Vollständig modulare Kammerofenanlage zur Chargen-Homogenisierung von Aluminium-Strangpressbolzen, elektrisch beheizt mit Jet-Heizung, Abwärmerückgewinnung und vollständiger Automatisierung. CE-zertifiziert (Maschinenrichtlinie 2006/42/EG). Lieferumfang: 1× Vorwärmofen (BSN 1607) – elektrisch, Jet-Heizung 2× Halteöfen (BSN 1608, 1609) – elektrisch, Zwangsumwälzung 2× Wärmetauscheröfen (BSN 1610, 1611) – unbeheizt, Zwangsumwälzung 1× Beschickungsmaschine (BSN 1612) – elektrisch/hydraulisch Iedpfxsyuvq Ts Afioar 12× Chargiergestelle (BSN 1614) Steuerschrank mit Siemens S7-1515F 2PN (Profinet) SPS und Bedienpanel Schub-Thermoelemente zur direkten Brammentemperaturmessung Wesentliche technische Vorteile: Jet-Heizung für schnelle, gleichmäßige Bolzenerwärmung (in der Regel 3–4× schneller als herkömmliche Konvektionsöfen) Integrierte Wärmetauscheröfen zur effizienten Abwärmerückgewinnung – geringerer Energieverbrauch und Betriebskosten Übertemperaturbetrieb möglich – kürzere Zykluszeiten durch direkte Brammentemperaturüberwachung Geeignet zur Homogenisierung und/oder Lösungswärmebehandlung / Warmauslagerung Modulares Design – für Neuinstallationen und Nachrüstungen bestehender Anlagen geeignet Ideal für: Aluminium-Strangpresswerke und Gießereien, die Energieverbrauch, CO₂-Fußabdruck und Durchsatz optimieren möchten. Weitere technische Details auf Anfrage erhältlich (PDF mit vollständigen Spezifikationen).

Kondisi: baru, Tahun pembuatan: 2026, Pneumatic Double Diaphragm Pump Cobra 40-10 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and superior surface quality. Ideally suited for processing shear- and moisture-sensitive materials. Minimal shear forces – perfect for processing, e.g., UV coatings. Ideal for handling small material quantities and for frequent color changes. Delivery scope: Base unit on frame, 7.5 m high-pressure twin hose, 5 l EX upper container, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Transmission ratio: 40:1 Volume per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Special offer – available immediately. Iasdpfxjbuqn Ho Afijr

Kondisi: bekas, Tahun pembuatan: 2003, nomor mesin/kendaraan: M321, Technical Specifications & Performance Data The ACMA GD RC15/6-200 is a rotary filling monoblock with integrated capper and cap orienter, designed for highly reliable industrial packaging applications. This used unit delivers dependable performance for a wide range of liquid products in bottles, combining precise filling with efficient capping on a compact carousel platform. Its format range and cap flexibility make it an excellent choice for upgrading an existing filling line or expanding an industrial packaging cell. Manufacturer: ACMA GD Model: RC15/6-200 Year of manufacture: 2003 Machine concept: Rotary filling monoblock with capper and cap orienter Output (500 ml): up to 85 bottles/min Output (650 ml): approx. 40–75 bottles/min Bottle formats: compatible with 0.5 L, 0.65 L, 0.75 L, 1.0 L Supported cap types (examples): screw cap, push-pull screw cap, refill screw cap, flip-top screw cap Iasdpeymdpzjfx Afier Filling carousel: 15 valves (according to model designation) Capping turret: 6 heads (according to model designation) Compliance: CE-marked Advanced Automation & Control Systems The RC15/6-200 integrates synchronized rotary filling and capping turrets with automatic cap orienter and feeding system. Format parts are clearly organized for fast format changes between different bottle sizes, supporting efficient product changeovers and minimizing downtime. Operator-friendly controls coordinate filling and capping timing for stable throughput and consistent torque application. - Synchronized rotary filler/capper with integrated cap orienter - Quick-change format parts for multiple bottle sizes - Process stability for reproducible filling accuracy and capping quality - CE-compliant safety control and secured access areas Integration Capabilities in Production Lines This filling monoblock can be seamlessly integrated into complete packaging lines. It can operate inline with upstream bottle orienters and downstream equipment such as separate trigger cappers, labellers, and cartoners. The format range from 0.5 L to 1.0 L supports multi-SKU operations in industrial packaging and beverage production for still liquids. - Inline operation with infeed and outfeed conveyors - Compatible with screw cap systems and downstream trigger cappers - Flexible formats: 0.5 L, 0.65 L, 0.75 L, 1.0 L - Suitable for integration into a used filling line or new installations Machine Condition & Maintenance History This used rotary filling monoblock is a functional piece of equipment, ready for operation following standard line integration and commissioning. The CE marking on the original nameplate underscores compliance with European safety requirements at the time of manufacture.

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SN 552000000, GH Mesin Pengerasan Mesin Pengerasan 9 Nomor Seri: 55200000 Tahun Pembuatan: 1999 Daya: 65 kW Daya generator: 50 kW Tegangan generator: 400 V Frekuensi: 100–200 kHz Diameter rol: 12–29 mm Kontrol: Sinumerik 840D Pengumpanan komponen Iaodpfx Ajx Eyqmjfier Sabuk konveyor untuk pengeluaran komponen

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 110 t, Hidrobrasil Die Spotting Press – 110 t – Tryout Press – Table 1,200 × 1,000 mm For sale is a hydraulic die spotting press from Hidrobrasil, offering 110 t pressing force and a versatile table and ram system. The machine features a rotatable and tiltable table, a rotatable ram, as well as a maximum opening of 1,300 mm, making it ideal for spotting, adjustment, and tryout operations in tooling and mold making. ==== Technical Data & Information: Hidrobrasil Die Spotting Press – Tryout Press – 110 t ==== General Information - Manufacturer: Hidrobrasil - Model: Die Spotting Press - Design: Tryout Press / Die Spotting Press - Pressing force: 110 t - Machine weight: approx. 11.5 t - Dimensions (W × H): approx. 2,900 × 3,000 mm Iasdpjv N D Ncofx Afier ==== Working Area - Maximum open height: 1,300 mm - Stroke: 800 mm ==== Table System - Table size: 1,200 × 1,000 mm - Table extendable: up to 1,000 mm - Table rotatable: 180° - Table tiltable: up to 75° - Table travel speed: 30 mm/sec ==== Tool Holder - Ram rotatable: up to 180° ==== Speeds - Downward speed: 1–10 mm/sec - Upward speed: 25 mm/sec ==== Hydraulics - Hydraulic system: Bosch Rexroth ==== Controls and Electrical - Control: Siemens S7-1200 - Control cabinet technology: Siemens ==== Features - Manufactured under German supervision in Brazil - CE-compliant design ==== Spotting operations, tool adjustment, tool tryout, mold making, tool making, tryout work, adjustment processes, flexible tool machining Hydraulic press, die spotting press, tool tryout press, tryout press, production press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply fully with the Brazilian national safety directive NR 12, which builds upon these standards. Our core strength is in special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 4273, gaya penekanan: 110 t, Die Übersetzung ins Englische für eine professionelle, technische Plattform wie Machineseeker könnte wie folgt lauten: --- Spotting Press – Manufacturer: Hidralmac – 110 t Try-Out Press – Table 1,200 × 1,000 mm For sale is a high-performance spotting press from Hidralmac with a pressing force of 110 t. The machine features a swiveling and traversable table, a large stroke of 1,150 mm, as well as high rapid traverse speeds, making it especially suitable for spotting, adjustment, and try-out work in tool and mold making. ==== Iedod Ap Ugspfx Afisar Technical Data & Information: Spotting Press Hidralmac – 110 t Try-Out Press == General Specifications - Manufacturer: Hidralmac - Model: Spotting Press - Design: Try-Out / Spotting Press - Pressing force: 110 t - Machine weight: approx. 16 t - Dimensions (L × W × H): 4,200 × 2,400 × 4,800 mm == Working Area - Stroke: max. 1,150 mm - Table stroke: 1,200 mm == Table System - Table size: 1,200 × 1,000 mm - Swivel table: up to 45° - Max. table load: 12 t - Table traverse speed: 25 mm/s - Table swivel speed: 10 mm/s == Forces - Return force: 11 t == Speeds - Working speed: 0 – 10 mm/s (adjustable) - Return speed: 130 mm/s - Rapid traverse: 195 mm/s == Hydraulics - Drive power: 23 kW - Oil tank: 400 l - Recommended oil: DIN HLP / ISO VG 46 == Electrical - Voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz == Equipment - Colour scheme: - Machine body: RAL 7035 (Grey) - Moving parts: RAL 2009 (Orange) - Other components: RAL 7021 (Dark grey) ===== Spotting work, tool adjustment, tool try-out, mould making, toolmaking, try-out work, adjustment processes, large tooling Spotting Press, Tool Try-Out Press, Tryout Press, Tool Adjustment Press, Tool Try-Out Press, Tryout Press, Hydraulic Press Are you looking for a hydraulic press custom-tailored to your application? Contact us for an individual offer. Our hydraulic presses are built according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which is based on these standards. Our core strength lies in custom machinery engineering and press automation. We offer customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers. ---

Kondisi: bekas, Test bench, test station, measuring station, test device, measuring instrument, tester for HV, PE, and insulation measurement ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High Voltage Test Device The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The unit 90-1V supplies a highly stable DC voltage with low ripple. One output pole carries the high voltage, the other output pole is near earth potential and can be set to a maximum of 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Iedpfxsf Axn Ao Afiear Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as pictured Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices available under stock numbers 57819, 57820, and 57821.

Kondisi: bekas, Control panel, test station, measurement station, test device, measuring instrument, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage tester The device PE/IS/HV / 91-3J.3 is designed for testing dielectric strength, insulation resistance, and protective earth voltage drop measurements in accordance with VDE 0113 and IEC regulations per EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The device SHV 16 / 90-1V.3 delivers a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other output terminal is near ground and can be set to a maximum potential of 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 Watts Iedpfx Asd Dc Unjfisar Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact device assembly on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices under stock numbers 57820 and 57821

Kondisi: bekas, Tahun pembuatan: 1991, prueba1 Iajdpfx Afovut D Tsier

Tahun pembuatan: 2018, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07759, Kami menawarkan kabin semprot bekas Tonello Spray Booth 1M W ini, tahun pembuatan 2018. Tipe mesin: Spray Booth 1M W Daya listrik: 3Pn+GND Tegangan dan frekuensi: 400 V - 50 Hz Tekanan udara bertekanan: 7 bar Tekanan hidrolik: 3 bar Tekanan maksimum tangki: bar Berat: 700 kg Nomor seri: 07759 Isdpfxoyt I Sao Afisar Tahun pembuatan: 2018 Volume keranjang: l Daya terpasang: 5 kW Arus puncak maksimum yang diserap: 16 A Arus kerja maksimum yang diserap: 10 A Penampang kabel suplai: 6 mm² Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, jangan ragu untuk mengirim pesan atau menghubungi kami.

Kondisi: baik (bekas), Tahun pembuatan: 2007, For sale: feeder for salt, feed, etc. Iasdpfxov A Rqms Afijr

Kondisi: sangat baik (bekas), en: CTS type CW-60/7 Walk-In Climate Test Chamber CTS Walk-In Climate Chamber 7m³ Temperature & Humidity Testing -60–120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. A professional walk-in climate and temperature testing chamber for industry, research, and quality assurance. This system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from –60 °C to +120 °C - Climate testing with 10–95 % relative humidity - Programmable temperature and humidity cycles - Endurance tests Iedpfxjylxaxs Afioar - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Especially suitable for: - Electronics testing - Solar modules (previous field of use) - Automotive components - Materials testing - Endurance tests The air circulation system ensures highly uniform temperature distribution throughout the entire 7 m³ test space. Technical Data: Temperature –60 °C to +120 °C Rate of change approx. 2 K/min Humidity 10–95 % rH Dew point range +5 °C to +89 °C Refrigerant R404A/R23 Max. permissible pressure: 25 bar III.6 Short User Guide Size Test volume: 7 m³ Walk-in design Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power Supply / Connection 400 V, 3/N, 50 Hz Nominal power: 43.1 kW Rated current: 67.5 A Protection class: IP 54 Weight: 4,000 kg Condition: used Scope of delivery: (see photos) (Subject to technical modifications and errors. All data provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Device for scratch testing to characterize the adhesion and scratch resistance of thin coatings and solid materials. The scratch testing procedure involves scoring the surface with a diamond tip under either a constant or progressive load. During the scratch process, the sample is moved under a video system to examine various types of damages caused by the tip and correlate these with the applied load. The images can be digitized and precisely aligned with emission, acoustic, and loading diagrams. This standardized process allows for the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-scratch function (multiple scratches on the same track), friction force measurement, and a 2018 upgrade: new illumination system with analyzer, polarizer, two apertures and filters, as well as high-resolution INFINITY lenses (5X and 20X), plus a lens holder with adjusting screws for easy tip/microscope calibration. Iodpsytrufsfx Afioar Including a calibration kit for table speed and applied load sensor.

Kondisi: sangat baik (bekas), Professional, mechanical analog hardness tester for measuring metal hardness according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power supply – ideal for quick on-site measurements, production, or quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Hardness Tester • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power • Clear analog measuring scale — Set includes: Iedpfxovbwzij Afijar • Hardness tester • Carrying case • Operating manual in German • Complete set of adapters and sleeves (as shown in the set) Condition: like new / old stock Equipment unused or only tested a few times – no signs of wear.

Kondisi: siap digunakan (bekas), 1 Iaodpfjytn Hksx Afior

Kondisi: sangat baik (bekas), CTS Model: CTS CW+40/7/7 Walk-in Climate Test Chamber CTS Walk-in Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate temperature test cell CTS CW+40/7/7 in industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles can be run. The high air circulation ensures an even distribution of climate conditions inside the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Iajdpfx Afeylmamsier Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions (entire system): Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heater Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, de Iasdpfx Ajyt Idvefier

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Displacement resolution:0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 10 kN Includes evaluation electronics and basic software. Iedpfx Aod R Dpmefioar Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for “quick tests” to be performed without a PC. For tests that require data storage and graphical recording, our basic software enables both machine control and test evaluation. This allows you to create various test procedures and generate a test report. Additionally, you have the option to export raw data for further processing in your own applications. Optional features: - Delivery & commissioning - DAkkS or manufacturer calibration according to DIN EN ISO 7500-1 - Clamping tools: Compression plates, bending fixtures, shear test devices, wedge grips, scissor grips, peel test grips, screw grips, pneumatic grips, and hydraulic grips.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Universal Testing Machine PM5 Force: 5 kN Crosshead Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Force Transducer: 5 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling ‘quick tests’ even without a PC. For tests that require data storage and curve recording, our basic software offers the possibility for control and evaluation. This allows you to create various test routines and generate test reports. Furthermore, you have the option to further process raw data in your own programs. Options: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips. Iedsydanhspfx Afiear

Tahun pembuatan: 2025, Kondisi: baru, Universal testing machine PM50 Force: 50 kN Crosshead travel: 1200 mm Test area: 400 mm Overall height: 1817 mm Weight: approx. 380 kg Displacement resolution: 0.01 mm Test speed: 0.03–1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Iajdeydazuopfx Afijr Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve tracing, the basic software enables both control and evaluation. This allows you to create various test sequences and generate a test report. Additionally, you can further process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Universal testing machine PM3 Force: 3 kN Crosshead stroke: 1200 mm Working depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Position resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Iedpfxeyc U Rbj Afijar Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be carried out without a PC. For tests that require data storage and curve recording, our basic software enables both control and evaluation. This allows you to generate various test sequences and create a test report. You also have the option to further process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Clamping tools: compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Universal Testing Machine PM5 Force: 5 kN Crosshead Travel: 520 mm Working Depth: 66 mm Iasdpfx Afsd R Dqbjior Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Force Transducer: 5 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling ‘quick tests’ even without a PC. For tests that require data storage and curve recording, our basic software offers the possibility for control and evaluation. This allows you to create various test routines and generate test reports. Furthermore, you have the option to further process raw data in your own programs. Options: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.