Beli Linde Pers Eksentrik Kolom Ganda bekas (26.553)

Kondisi: baru, Tahun pembuatan: 2024, Pressing force: 20 t Outreach: 155 mm Stroke: 6-60 mm Stroke rate: 84-210 strokes/min Ram adjustment: 50 mm Installation height, top, ram adjustment at top: 300 mm Table surface: 300x450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Ram area: 190x278 mm Pin hole in ram: Ø 25 mm Total connected load: 1.5 kW Machine weight approx.: 1.0 t Required space approx. (WxDxH): 1100x1100x1900 mm Machine number: 16146 LED machine lamp Frequency-controlled stroke rate Sick light curtain for safety and cycle operation 4x freely programmable electronic cams 4x freely programmable tool safeguarding modules Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading operations Hjdpfx Ajvfhp Ssa Iop

Kondisi: bekas, Tahun pembuatan: 1987, Pressure 60 t Outreach 280 mm Stroke 10–140 mm Stroke rate 110 strokes/min Ram adjustment 60 mm Table surface 740x560 mm Ram surface 380x195 mm Pass-through opening in table 300x200 mm Table height 760 mm Pin hole in ram Ø 40 mm Hydraulic clutch-brake combination Central grease lubrication Mechanical overload protection in ram Manual stroke adjustment Manual ram adjustment Hjdjw E Nu Iopfx Aa Iop Two-hand operation Foot pedal operation Height-adjustable table

Tahun pembuatan: 2002, Kondisi: bekas, Press force 130 t Throat depth 350 mm Stroke 16-200 mm Strokes per minute 55 spm Ram adjustment 100 mm Table area 1200x700 mm Ram area 730x530 mm Passage opening in table 300x210 mm Hedpfxelp U Dlo Aa Isp Table height 900 mm Pin hole in ram Ø 50 mm Machine weight approx. 8.0 t Space requirement approx. WxDxH 1500x2200x3500 mm Pneumatic clutch-brake combination Hydraulic overload protection Drive via intermediate gear Central lubrication Motorized ram adjustment Two-hand operation Foot operation Control panel separate Approved for manual feeding operations

Tahun pembuatan: 1971, Kondisi: bekas, Pressure 75 t Throat depth 310 mm Stroke 16-140 mm Strokes per minute 105 spm Slide adjustment 80 mm Table surface 800x610 mm Slide surface 600x175 mm Passage hole in table Ø 170 mm Table height 820 mm Pin hole in slide Ø 40 mm Hjdpelp U Eiofx Aa Isp Machine weight approx. 4 t Space requirement approx. 1500x2000x2700 mm Mechanical shear plate in the slide Manual central grease lubrication Foot pedal operation Approved for use with safety tools only

Kondisi: bekas, Technical details: Faceplate diameter: 4000 mm Swing diameter: 4300 mm Turning height: 330 mm Faceplate speed range: 1 - 92 rpm Hodpfx Aaevb Dq Rs Iop Workpiece weight: 18 t Feed rates: 1 - 4000 mm/min Main drive motor: 55 kW Total power requirement: 85 kVA Machine weight approx.: 64 t Space requirement approx.: 9.0 x 7.2 x 5.5 m Equipped with CNC SIEMENS 840 D With 2 vertical supports Tool base holder Chip conveyor

Kondisi: bekas, technische_details_si_5000_6100_2400_1490_340_100000_100_155_0,4 -50_2achsen_cnc_si840d Hedpjw Rz U Aefx Aa Isp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 5.500 mm, jarak lintasan sumbu Y: 2.900 mm, jarak gerak sumbu Z: 1.000 mm, panjang meja: 5.000 mm, lebar meja: 2.000 mm, cnc-portalfraesmaschine-seramill240t Hjdpfx Aeyfpkbsa Isp

Kondisi: baru, Tahun pembuatan: 2025, 070145_hu_it_lt Hedpfexcg D Sjx Aa Isp

Kondisi: baru, Tahun pembuatan: 2026, Kondisi: baru Tahun pembuatan: 2026 Nomor stok: 070225 Waktu pengiriman: September 2026, tergantung ketersediaan Negara asal: Turki Harga: €33.700 Cicilan leasing: €643,67 Tekanan tekan: 30 ton Tekanan tekan nominal (bahan 2 mm) Panjang meja: 400 mm Lebar meja: 600 mm Lubang tembus di meja: 150 mm Langkah (Stroke): 1 - 60 mm Jumlah langkah: 140 /menit Jumlah pemandu punch: 4 Penyesuaian punch: 60 mm Lubang pin pada punch: 40 mm Jarak keluar: 200 mm Tinggi pemasangan: 300 mm Motor: 3 kW Panjang: 1.300 mm Lebar: 1.150 mm Tinggi: 2.050 mm Berat: 1.670 kg Konstruksi rangka baja las Pemandu punch 4 titik Kombinasi kopling-rem pneumatik Pelindung dengan sensor cahaya dan pintu samping Pengaman beban lebih mekanis Pengoperasian dua tangan dan pedal kaki Penyesuaian stroke manual Penyesuaian punch manual Jumlah langkah variabel melalui inverter frekuensi Mode operasi: * Mode penyesuaian * Pengaktifan dua tangan * Pengaktifan kaki * Mode 2 langkah via sensor cahaya * Mode kontinu Layar sentuh untuk: * Penghitung langkah dengan preset untuk mode kontinu * Penyesuaian jumlah langkah * Interval dan durasi pelumasan * Pesan alarm * Arah putaran motor Hedswirbxopfx Aa Iop * Pemantauan input dan output 2 cam bebas untuk koneksi ke periferal Pelumasan sentral otomatis Perlengkapan sesuai regulasi CE Opsi tambahan: Pad anti getar: €132 Pelat penjepit: €720

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Helmerding Press Tipe: KDH 315/2100/2 Gaya tekan: 3.150 kN Ketinggian langkah: 40-200 mm Jumlah langkah: 20-100 1/menit Penyesuaian ram: 120 mm Tinggi pemasangan: 500 mm Ukuran meja: 2.000 x 1.200 mm Ukuran ram: 2.000 x 1.100 mm Berat mesin: 44.000 kg Helmerding Roller Feeder Tipe: EWH 800/150 Lebar strip: 100 - 800 mm Ketebalan strip: 0,5 - 6,0 mm Helmerding Straightening Machine Tipe: R-70/800/9-S Lebar strip: 100 - 800 mm Ketebalan strip: 0,5 - 5,0 mm Diameter roll pelurus: 70 mm Jumlah roll pelurus: 9 buah Helmerding Decoiler Hodpozhtl Tjfx Aa Ijp Tipe: HE-4/800/MOT/HYD Lebar strip: 100 - 800 mm Berat coil maks.: 4.000 kg Diameter dalam coil: 508 mm Diameter luar coil: 1000 – 1.600 mm

Kondisi: bekas, Tahun pembuatan: 1950, de2hu-it-lt-lv-nb-nl-pl Hodpfsx Sr Evjx Aa Iop

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Daya tekan: 1250 kN, Jumlah langkah: 55 min-1, Penyesuaian ram: 75 mm, Hedpfx Aaoxxa Aae Iep Langkah: 20-120 mm, Daya motor: 11 kW, Tegangan: 380 V, Berat mesin: 8,6 t, Jarak lengan: 340 mm, Area pemasangan ram: 620 x 300 mm, Area pemasangan meja: 650 x 1000 mm, Kopling hidrolik Ortlinghaus dengan rem ganda, Pengoperasian dengan dua tangan, Perbaikan pada ram telah dilakukan secara profesional.

Kondisi: bekas, Tahun pembuatan: 1978, Zulässige Hubzahl in Relation zum Mat.-vorschub bei 300 mm = 40-60 Hübe 150 mm= 120 Hübe Hjdpfjt Hwz Nsx Aa Ijp Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Type AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, ohne Grube). Blechband führt über die Abrollhaspel hinweg zum einseitigen Zangenvorschubapparat und dann in die Maschine. • HEILBRONN Coilabwickelgerät Type HAEMH 4000/500 S #204753 mit Coilablage- Platz, in welchem das Coil aufgegriffen und gespannt wird und dann wieder in Zurück in Position fährt, max. Coilgewicht 4000 kg, Coil-Ø max. 1500 mm, max. Bandbreite 500 mm, • angebauter Richtapparat für maximale Blechbreite 400 mm, die Blechführung ist In der Breite verstellbar, Blechstärke verstellbar 1-3 mm • automatische Öl-Umlaufschmierung mit Überwachung, • hydr. Überlastsicherung, motorische Stößelverstellung 125 mm • Förderband für die fertigen Pressteile, separater Schaltschrank -1990 modernisiert- Admissible number of strokes in relation to material feed: 300 mm = 40–60 strokes, 150 mm = 120 strokes. Accessories/Special Equipment: • FREI / WEINGARTEN straightening unit, type AMR 04 So, with subsequent overhead loop control (space-saving, no pit required). The strip runs over the decoiler to a single-sided gripper feed unit and then into the machine. • HEILBRONN coil unwinder, type HAEMH 4000/500 S #204753, with coil storage station, where the coil is picked up, clamped, and then moved back into position. Max. coil weight 4,000 kg; max. coil diameter 1,500 mm; max. strip width 500 mm. • Integrated straightening device for max. sheet width 400 mm, adjustable sheet guide width, thickness adjustable 1–3 mm • Automatic oil circulation lubrication with monitoring • Hydraulic overload protection, motorized ram adjustment 125 mm • Conveyor belt for finished pressed parts, separate control cabinet – modernized 1990.

Kondisi: bekas, Tahun pembuatan: 1985, Pressing force: 63 t Passage width: 1350 mm Stroke: 300 mm Total power requirement: 16 kW Machine weight approx.: 10 t Space requirement approx.: 2.0 x 1.8 x 3.4 m HYDRAP Hydraulic double-column press (embossing press with sliding table) Type: HPDb 63 Year of manufacture: 1985 Serial no.: H 40/5273 Pressing capacity of upper ram: 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without tool changer): approx. 400 mm Stroke speeds up/down / full load: 400/400 or 16 mm/sec Clearance between uprights (front): 1350 mm Clearance between uprights (side): 350 mm Hjdpjt Hwxusfx Aa Isp Ejector in ram pressure/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx. 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ shuttle table) Accessories / Special equipment Stable double-column frame press with adjustable quadruple prism guides, equipped with: • Hydropneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces, which accommodate the pressed parts and the lower tool, position them under the ram, and after the pressing operation transport them to the rear onto a stacking device. The table then returns to the starting position. This system can be easily removed or modified. • CNC press controller (Siemens S5) with monitor for input of all relevant process data or for saving tooling data, allowing for easier and faster machine setup and for monitoring part transport. Shuttle table holder. • SICK light barriers fitted at the front press area/ loading station. • The ram is equipped with an electromechanical depth stop (300 mm stroke) and hydraulic tool clamping device, as well as integrated hydraulic ejector. • Displays for pressure and oil temperature, part counter, foot switch, two-hand release, central lubrication, hydraulic oil flow cooling, free-standing electrical cabinet, etc. The machine was used for pressing edge trims on cylinder head gaskets. Condition: Good to very good – demonstration ready, under power Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1977, Hydraulic C-Frame Drawing Press FRITZ MÜLLER CEZ 160.5.8 Pressing force: 160 t Throat depth: 360 mm Stroke: 560 mm Total power requirement: 33 kW Machine weight: approx. 6,000 kg Space requirement: approx. 2,000 x 2,400 x 3,650 mm Manufacturer: FRITZ MÜLLER Model: CEZ 160.5.8 Year of manufacture: 1977 / 2004 (retrofitted) Serial no.: 856597 SPECIFICATIONS: • Upper ram pressing force: 160 t • Return pressing force: 16 t • Drawing cushion pressing force: approx. 40 t • Ram area: approx. 800 x 600 mm • Table size: approx. 900 x 720 mm • Table bore: 160 mm • Maximum daylight opening: 700 mm • Throat depth: 360 mm • Table height above floor: 900 mm • Ram bore for tool mounting: 50 mm • Upper ram stroke: approx. 560 mm Hodpfx Aaot Hw E Ij Isp • Drawing cushion stroke: approx. 200 mm • Drive power: approx. 30/33 kW - 400 V – 50 Hz • Weight: approx. 6,000 kg • Machine dimensions (L x W x H): 2,000 x 2,400 x 3,650 mm Equipment / Special features: • Hydraulic drawing cushion integrated in the table with adjustable cam rail for stroke length • Side-mounted cam rail for upper ram stroke adjustment, including switches for rapid traverse, working stroke, and return • Two-hand control mounted at the front of the table, foot switch, etc. • Built-in filter pump, pressure display via manometer above the cylinder • Integrated cut shock absorber, piece counter, etc. • Freestanding control cabinet completely renewed in 2004 at the manufacturer's factory, with timer for pressing time and monitoring lights • Overhauled/modernized hydraulics with integrated oil cooler Condition: good – will be available for powered demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A further selection of hydraulic presses is always available from our stock – please contact us for current offers.

Kondisi: bekas, Tahun pembuatan: 1971, en-GB Hsdpfx Ajt Hw Dwja Ijp

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force 500 t Clear width 750 mm Stroke 120 mm Total power requirement 57 kW Machine weight approx. 16 t Hjdpfx Aet Hwpyoa Ijp Space requirement approx. ... m HYDRAP CNC press control and Siemens Simatic S5 control, continuously adjustable workpiece transport unit around the right column, table size 400 x 740 mm, max. installation height 200 mm

Kondisi: bekas, Tahun pembuatan: 2009, panjang total: 2.700 mm, lebar total: 1.700 mm, tinggi total: 3.900 mm, Warna: Hijau Berat kosong: 5.000 kg - Tahun pembuatan: 2009 - Dokumentasi tersedia: Tidak - Sertifikat CE tersedia: Tidak - Sistem kontrol: Konvensional - Model press: Press bengkel - Tekanan press [ton]: 200 - Stroke min. [mm]: 1 - Stroke maks. [mm]: 1100 - Panjang meja [mm]: 730 - Lebar meja [mm]: 1900 - Dimensi transportasi: 2700mm x 1700mm x 3900mm (p x l x t) - Bobot transportasi [kg]: 5000kg - Paket transportasi [unit]: 2 Informasi Keuangan Hedpfxszdnzhe Aa Iop PPN: Harga yang tertera belum termasuk PPN PPN/Perpajakan selisih: PPN dapat dikreditkan untuk pelaku usaha Pengiriman dan tukar tambah dapat dilakukan kapan saja untuk peralatan dari semua bidang industri Lukas van Rossum

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, gantry-2010 Hedpoy Dvwyefx Aa Iep

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: fungsi terbatas, CNC gantry milling center (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 A high-performance gantry milling machine designed for the machining of large workpieces. The primary areas of application are milling and turning of large, complex components. The machine can be inspected under power by appointment. Condition: According to its year of manufacture; partial overhaul is required in some areas. A very high-quality machine, therefore absolutely worthy / strongly recommended for modernization or complete overhaul. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm - Machine length: 31,100 mm - Machining length: 11,000 mm - Clearance width: 4,400 mm - Clearance height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area per single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight on total table: 112 t - Maximum permissible workpiece weight on single table: 80 t Crossbeam: - Travel: 2,000 mm Milling and drilling slide: Hedpfxjyuptzo Aa Iep - Drive power for milling and drilling (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - CNC control: SINUMERIK 880 - 2 chip conveyors - Documentation - CE mark No guarantee regarding the completeness or accuracy of technical data and equipment details. – Subject to prior sale – A detailed technical data sheet and further equipment information are available on request.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Produsen: Line Tipe: Seramill 240 Kontrol: NUM 750 Perjalanan sumbu X: 6000 mm Perjalanan sumbu Y: 2500 mm Hsdpfx Aoyf A H Nea Iep Perjalanan sumbu Z: 950 mm Jarak kolom: 2400 mm Meja: 6000 x 2100 mm Kepala frais otomatis: 2,5° Kecepatan spindle: 3200 rpm Kecepatan pengumpanan: 10 m/menit Berat mesin: sekitar 35 ton

Kondisi: baik (bekas), Tahun pembuatan: 1977, 1 unit excenter press bekas Merek: Helmerding Hsdpowxxr Aofx Aa Iep Tipe: EL 35 B Tahun pembuatan: 1977 No. mesin: 5182 Daya tekan: 350 kN Langkah dapat diatur: 12 - 80 mm Ram dapat diatur: 70 mm Penurunan ram per menit: 110 Meja dapat diatur: 150 mm Jarak aman: 150 mm Jarak sisa: 50 Berat: 2050 kg Dilengkapi dengan Katup keselamatan untuk mesin press

Kondisi: bekas, Tahun pembuatan: 1978, press-description-001 Hsdpfjvuk Ipjx Aa Iop

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% Hsdsg S R Twepfx Aa Iop Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Cushion speed 100 mm/sec Frequency 50 Hz Hjdpfxod Ih Ncs Aa Ijp Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!