Beli Pers Kolom Ganda Yang Cepat bekas (30.863)

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Itjdpfx Aou N Ddwspaek Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Tahun pembuatan: 1987, Kondisi: bekas, Press force: 40 t Throat depth: 270 mm Stroke: 4–100 mm Stroke rate: 130 strokes/min Ram adjustment: 80 mm Table surface: 670 x 540 mm Ram surface: 460 x 300 mm Passage in table Ø 100 mm Table height: 850 mm Ram bore Ø 50 mm Machine weight approx. 6 t Space requirements (WxDxH): approx. 1500 x 2300 x 3300 mm Hydraulic clutch-brake combination Central grease lubrication Hydraulic overload protection in the ram Automatic stroke adjustment Motorized ram adjustment Two-hand control Iodpfx Ajp Syctspaetk Foot control Counterbearing Air cooler Hydraulic journal clamping Hydraulic connecting rod clamping Hydraulic die/clamping device

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: 18282, Total pressing force: 140 t Stroke: 800 mm Installation height: 1,004 mm Distance between uprights (L-R): 2,060 mm Table clamping surface approx.: 2,000 x 520 mm Ram clamping surface approx.: 2,040 x 520 mm Working speed: 4–20 mm/s Rapid traverse: 135 mm/s Return speed: 120 mm/s Machine weight approx.: 14 t Height above floor approx.: 4,810 mm Oil capacity approx.: 700 l Itedpfx Apsuqd S Ajajk Standard equipment The press is equipped with a frontally extendable sliding table which can be extended by 500 mm. Water cooler SICK light curtains at the front and rear

Tahun pembuatan: 2008, Kondisi: bekas, Pressure 315 t Stroke 40-200 mm Strokes per Minute 20-100 spm Slide Adjustment 120 mm Slide Surface 2000x1100 mm Table Surface 2000x1200 mm Die Pass-Through in Table 1700x250 mm Installation Height Bottom, Slide Adjustment Top 500 mm Side Frame Passage 820x650 mm Total Power Requirement 45 kW Machine Weight approx. 44 t Hydraulic Clutch-Brake Combination Hydraulic Overload Protection in Slide Semi-Automatic Stroke Adjustment Motorized Slide Adjustment Frequency-controlled Stroke Rate Central Flow Grease Lubrication for Guides Oil Circulation Lubrication Slide Balancing Cylinders Front/Rear Safety Doors Hydraulic Die Clamping System Extendable Table Plate Hydraulic Roll Block Rails in Table Itodpfx Aperdi Dlsaek Helmerding EWH800/150 Servo Feeder (V-1341-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-6.0mm, Max. Cross Section: 1600mm² Intermittent Airing, Height Adjustment via Gear Motor Straightener R-70/800/9-S (R-1343-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-4.0mm, Max. Cross Section: 1600mm² at 450N/mm² Straightening Speed, frequency-controlled up to 25m/min Strip Infeed Aid: Transfer Table with hydraulically adjustable peeling wedge Hold-down hydraulically adjustable Strip Side Guide: 1 pair of lateral roller guides adjustable by handwheel Feed Rollers: 2x rollers Ø140mm, pneumatically adjustable Straightener: 9x rollers Ø70mm, manual adjustment by handwheel Uncoiler HE-4/800/MOT/HYD (H-1342-6518) Strip Width: 100-800mm Max. Load: 4t Coil Inner Diameter: Ø508mm Coil Outer Diameter: Ø1000-1600mm Drive, frequency-controlled Limiting Arms Hydraulic Expansion Hydraulic Pressure Arm

Kondisi: bekas, Tahun pembuatan: 1986, de-to-hu-it-lt-2024-06-16-01 Iedpfxoyqvkxe Apajtk

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 2.000 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 18.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 38 Nm, berat keseluruhan: 65.000 kg, First commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ±100° C-axis: ±360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with T-slots 18H12 / 250 mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power requirement: 85 kVA Itedeyrdc Ejpfx Apaek Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided opening doors - 10-position tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Condition of the machine Fully functional, in very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, MBZ-72-80-3 Ijdpoy S Hazjfx Apaetk

Kondisi: bekas, Tahun pembuatan: 1986, de-hu-001 Itsdpfx Aeyqtm Rspaok

Kondisi: bekas, nomor mesin/kendaraan: 52 / 519, Spindle diameter: 90 mm X-travel: 700 mm Column distance: 900 mm Longitudinal movable table size: 770 x 900 mm Table longitudinal travel (X-axis): 700 mm Y-travel: 500 mm Z-travel: 1100 mm Itjdpfx Ajh Ra Stjpajk Table feed range: 15 - 280 mm/min Rapid traverse Z-axis: 530 m/min Spindle bore diameter / taper: MT4 (Morse) mm Max. spindle bore diameter: 230 mm Max. spindle stroke: 170 mm Spindle speed, lower range: 10 rpm Spindle speeds, upper range: 2000 rpm Vertical feed of the spindle head: 0.02 - 0.2 mm/rev Number of feed rates: 6 Main spindle power: 3 kW Total power requirement: 4.2 kW Approx. machine weight: 4 t Required space approx.: 1.9 x 2.2 x 2.4 m

Kondisi: bekas, Kekuatan: 400 TON. Jumlah titik penekan: 2 Model: AF 400 MB 30-60 Tahun pembuatan: 1992 Ukuran meja: 3.000 x 1.600 mm. Ukuran luncuran: 3.000 x 1.600 mm. Jarak depan: 3.000 mm. Jarak samping: 1.200 mm. Pengaturan luncuran: 150 mm. Jumlah pukulan per menit: 20 pukulan/menit. Langkah: 500 mm. Itsdpfjq N Er Dsx Apaok Jarak antar cetakan pada posisi bawah: 1.118 mm. Daya motor utama: 30 kW Sistem keamanan hidraulik: tersedia Berat: 82 ton.

Kondisi: bekas, Tahun pembuatan: 1998, Pressure: 80 t Throat depth: 335 mm Stroke: 8 – 100 mm Stroke rate: 60/90 strokes/min Table surface: 900 x 670 mm Passage opening in table: 280 x 200 mm Max. installation height: 450 mm Ram adjustment: 80 mm Ram surface: 700 x 450 mm Max. tool dimensions: 700 x 450 mm Max. tool weight: 140 kg Total power requirement: 11.07 kW Machine weight approx.: 6.5 t Space requirements (WxLxH): approx. 1.72 x 2.0 x 2.82 m Equipment: - Pinion gears - Hydraulic clutch - Large ram - Pneumatic ram counterbalance with air tank on right side of frame - Oil lubrication, make: Vogel - Semi-automatic stroke adjustment Iodouild Aspfx Apaetk - Hydraulic ball screw adjustment with manual clamping - Mechanical overload protection (shear plate) - Ram adjustment with Siko counter - Table clamping plate - Monitored ram top hold device - Control cabinet mounted on console on right machine frame - Foot switch - 1 set of vibration isolation elements - Operating manual / EC Declaration of Conformity The machine will receive a thorough technical inspection at our facility and comes with a current press inspection, as well as: - Oil change - Filter change - Replacement of hoses

Tahun pembuatan: 1976, Kondisi: bekas, Pressure 100 t Column gap 625 mm Stroke 150 mm Table surface 580x450 mm Ram surface 580x340 mm Pass-through opening in table Ø 150 mm Table height 850 mm Pin hole in ram Ø 45 mm Lateral column passage 200x200 mm Machine weight approx. 6.0 t Space requirement approx. WxDxH approx. 1300x1300x2750 mm Fixed stop adjustment Itjdpfelp U Eusx Apaek Pressure and stroke cut-off Two-hand operation Rapid work cycle Rollbloc strips in the table Approved for manual loading operations

Kondisi: bekas, Tahun pembuatan: 1989, Merek dan model: Bruderer BSTA 25 EL Tahun produksi: 1989 Itodpoyrf Aajfx Apajk Kapasitas nominal: 250 kN, 25 ton Jumlah pukulan maks: 100/1350 per menit Langkah dapat disesuaikan: 13, 16, 19, 25, 32, 38 mm Dimensi meja: 640 x 530 mm Jarak antara penyangga: Longitudinal 640 mm; Lateral 220 mm Dilengkapi feeder rol BBV 190/85 di sisi kanan. Lebar strip maks: 160 mm Panjang umpan: variabel hingga maks 85 mm Opsional: Kabin peredam suara Pompa oli. Pendingin oli dengan penukar panas. Pelindung keselamatan depan dan belakang. Dipasang pada 4 kaki pegas. Penyesuaian slide/ram: 51 mm Dokumentasi disertakan. Berat press sekitar 5000 kg.

Kondisi: baik (bekas), Tahun pembuatan: 1970, Pressing force 80 t Passage width 350 mm Stroke 600 mm Table dimensions - longitudinal 400 mm Space requirement approx. 1400 x 1050 x 2350 mm Itodpfx Ajvwgqrepaek This press is still in very good condition and has seen little use.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 15 t, C-frame press – 15 t – 300 × 300 mm For sale is a C-frame press from the manufacturer DURENDUS with a maximum pressing force of 15 t. The machine features a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for pressing operations, assembly work, and small batch production in industrial applications. ##### Technical specifications & information: ==== General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Pressing force: 15 t - Table size: 300 × 300 mm Iodpfxsy Twg Ie Apaetk - Ram plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Total depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Ram plate guide: double-guided ==== Hydraulic cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Approach speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & drive - Hydraulic power unit: DUPLOMATIC - Hydraulic pump: ASC - Pump delivery rate: 7.5 l/min - Tank capacity: 50 l - Cooling: air cooler - Oil level monitoring: electronic - Hydraulic unit: mounted on top of the machine ==== Control system - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure setting via touchscreen - Stroke adjustment via touchscreen - Hydraulic oil temperature monitoring - Fault display via control panel - Remote service/maintenance available - Operation: two-hand control ==== Safety - Light curtain - Two-hand control - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor power: 2.2 kW - Lighting: LED - Control cabinet protection class: IP 54 ##### Fields of application: pressing, assembly work, small batch production, jig construction, toolmaking, metalworking, fine assembly, testing operations, workshop applications (hydraulic press, C-frame press, single-column press, 15 t press, 15 ton press, assembly press, insertion press, small batch press, workshop press, industrial press) Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our great strength lies in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. Hydraulic components are mainly sourced from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 1972, PLANSCH-5000-HU Ijdpfx Ajyqtilopaotk

Kondisi: bekas, Tahun pembuatan: 1971, de_hu_it_lt_240603 Iedpfxeyqvl Ae Apaetk

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 14.194, Total pressing force: 80 - 800 t Ram stroke: 1600 mm Distance between uprights (L-R): 2850 mm Distance between uprights (front-back): 1000 mm Installation height: 1900 mm Table clamping surface approx.: 2800 x 2000 mm Ram clamping surface approx.: 2800 x 2000 mm Itodpju Saaajfx Apajk Cushion force in table: 32 - 320 t Cushion stroke: 400 mm Cushion area: 2500 x 1700 mm Rapid traverse down: 400 mm / s Working speed: 5 - 42.7 mm / s Rapid traverse up: 420 mm / s Power requirement: 246 kW Height above floor approx.: 7785 mm Machine weight approx.: 100 t Number of sliding tables: 1 pc.

Kondisi: bekas, Tahun pembuatan: 1998, druck160t_hu_it_lt Iedpfxjzrpqyj Apaetk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, nomor mesin/kendaraan: 5058870, Pressing force: 25 t Throat depth: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Ijdpfx Apom Uxzueastk Stroke adjustment: 4 - 80 mm Stroke rate: 150 /min Drive motor: 380 V, 1.1 kW Space requirement: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Kondisi: bekas, Tahun pembuatan: 1972, B3579VTR Itedpfx Aeyqvpzepajk

Kondisi: bekas, Tahun pembuatan: 1989, de-to-hu-it-lt-lv-nb-nl-pl Itjdpjy Hqz Sofx Apaok

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Ukuran meja: 1000x750 atau pelat penjepit mm Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m Iodpou N Dfhsfx Apajtk - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) - Pengoperasian dengan kaki dan tangan tersedia - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter termasuk.

Kondisi: bekas, Tahun pembuatan: 1983, nomor mesin/kendaraan: 5154, Total pressing force: 25 t Throat depth: 250 mm Ram stroke: 6 - 60 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 190 mm Clamping plate thickness: 50 mm Table clamping surface approx.: 500 x 400 mm Iedpfsuqc Hfox Apaetk Ram clamping surface approx.: 350 x 250 mm Clamping pin bore in ram: 40 H7 mm Strokes per minute: 160 min-1 Dimensions (LxWxH): 1,300 x 1,500 x 1,995 mm Machine weight approx.: 2 t Additional features: Tilting press body

Kondisi: bekas, Tahun pembuatan: 2005, de-to-hu-it-lt-001 Isdszrpt Ijpfx Apaotk