Pers eksentrik - kolom tunggal

RUHRMANN EVR 80 H

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine currently in operation; test runs can be performed during inspection; Good working condition; Folding machine manufactured by the renowned German company GUK, equipped with a high-pile automatic feeder (sheet feeding from the top via suction roller) FL2-50, 2 folding units, both buckle-type, with maximum working widths of 50 cm, and a stream delivery section. GUK folding machine, model FA 50/6-6 FL2-50 – feed width up to 50 cm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Sheet feeder speed (automatic feeder): 40 - 180 m/min Lajdpferx S Iwox Aahok Maximum performance: up to 27,000 A4 sheets/hour Electrical supply: 400 V/50 Hz Machine equipment: - High-pile automatic feeder FL2-50 - Multifunctional counter for programming machine operation. Enables folding sheets in groups (batches) with a specified quantity per batch, including stepless adjustment of intervals between batches. - 1st folding unit FA 50/6, 6 folding pockets - Soundproofing cover for 1st folding unit (upper section) - 2nd folding unit FA 50/6, 6 folding pockets - Soundproofing cover for 2nd folding unit (upper section) - Stream delivery S 520; can be connected after the 1st or 2nd folding unit.

Tahun pembuatan: 2002, Kondisi: bekas, Press force 63 t Throat depth 315 mm Stroke 8–100 mm Strokes per minute 140 spm Ram adjustment 63 mm Table size 1200 x 630 mm Ram surface 800 x 315 mm Passage opening in table Ø 110 mm Table height 820 mm Ram bore Ø 50 mm Lasdpfx Aaolp U D Tjhok Shut height 335 mm Total power requirement 7.5 kW Machine weight approx. 5 t Pneumatic clutch/brake combination Central oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand control Foot control Roller block rails in table Hydraulic clamp on ram Compensating cylinder Approved for manual loading operations

Kondisi: bekas, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Slide adjustment: 55 mm Slide area: 290 x 210 mm Slide bore: 40 H7 mm Passage opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight approx. 3.4 t Laodpfecp Apyex Aahok Space requirement approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Centralized lubrication system by Vogel - Balluff cam controller - Height-adjustable table - Mechanical overload protection in the ram (shear plate) - Control cabinet with touchscreen - Foot switch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Pressing force: 105 t Bending length: 3,100 mm Lajdpfx Aaovq R Uujhok Distance between uprights: 2,600 mm Table width: 100 mm Table height: 750 mm Control: DELEM DA 65 Installation height: 200 mm Working speed: 0 – 10 mm/sec Return speed: 0 – 100 mm/sec Rapid traverse upward max.: 100 mm/sec Voltage: 380 V / 50 Hz Total power requirement: 11 kW Machine weight approx.: 7.5 t Space requirement approx.: 4 x 2.2 x 2.8 m Equipment: - CNC control DELEM DA65 graphic video - Program-controlled backgauge with 2 axes - New lower tool - 2-hand operation / foot switch

Tahun pembuatan: 1980, Kondisi: bekas, Pressure 80 t Reach - mm Stroke 50 mm Table area 875 x 695 mm Ram area 350 x 355 mm Lajdpfxjdlcy Ho Aahsk Ram adjustment 71 mm Strokes per minute 30 - 90 spm Frame opening 450 mm Machine weight approx. 6.2 t Space requirements approx. 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top) 480 mm Additional information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen incl. wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine will be safe for manual loading operations with open tools. Before delivery, a current accident prevention inspection (UVV) and brake time measurement will be carried out.

Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: C15_1, Electric press brake C15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1600mm Laodpfx Ash I D Hfjahek Controlled axes: X-R axis (2x manual backgauge fingers) Standard A / R1 / AMADA / Promecam press brake tool clamping system Control: TC15-2D graphic touchscreen Options: - 4 or 5 axis backgauge system - Lazersafe light curtain system Standard - Lazersafe IRIS light curtain system - Lazersafe IRIS+ light curtain system with angle measurement - Additional display with 3D bending software - Support table - Front and rear lighting - WILA / Trumpf / Type B tool clamping system - 2x bending aids 36-month warranty after installation

Kondisi: baik (bekas), Tahun pembuatan: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Laedpfxsh Hbpwo Aahsk Available: 14 units

Tahun pembuatan: 1990, Kondisi: bekas, Press force: 80 t Throat depth: 250 mm Stroke: 5–95 mm Table area: 805 x 510 mm Distance table/ram (stroke bottom): 400 mm Lodpfjfn Aqnex Aahjak Ram bore: 45 mm Ram adjustment: 100 mm Ram area: 360 x 300 mm Strokes per minute: 55 Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight compensation Machine will be partially overhauled in our facility next year (dismantling, inspection, new painting, new wiring, new control cabinet)

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table size: 830 x 610 mm Ram surface: 650 x 400 mm Frame opening (rearward): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirements approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - With gear drive - Fixed table - Automatic stroke adjustment - Automatic ram adjustment - Hydraulic overload protection Lajdetycdkjpfx Aahek - Ejector - Central grease lubrication - Cover plate for drop-through hole - Infinitely variable speed control via frequency converter - The machine will be technically inspected and overhauled in-house, and will receive a new control cabinet with safety controls and touchscreen - Current accident prevention inspection (UVV) including brake time measurement

Kondisi: bekas, Tahun pembuatan: 2009, Pressing force 40 t Stroke 4 - 100 mm Stroke rate 130 /min Throat depth 230 mm Installation height 475 mm Table size 650 x 460 mm Through-hole in table 205 x 165 mm Table height above floor 710 - 950 mm Table adjustable 240 mm Ram area 435 x 240 mm Ram adjustment 85 mm Drive power 5.0 kW Weight 2.6 t Space requirement approx. 1.2 x 1.7 x 2.3 m Lodpfx Aajvzxpnjhjak Approved for manual loading operations in accordance with CE standard Equipped with motor, hydraulic clutch/brake combination, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, motorized central lubrication, adjustable table, two-hand and foot control