Beli Sick Penyelaras Gabus Prosecco bekas (281)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, gaya penekanan: 120 t, panjang meja: 600 mm, lebar meja: 600 mm, Vulcanizing Press – Manufacturer: Hidrobrasil – 120 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 120 t. The machine is equipped with heating plates measuring 600 × 600 mm, flexible pressure adjustment, as well as comprehensive control and safety features. It is ideally suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ===== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press - Pressing Force: 120 t (max. 1,600 kN) - Pressure Range: 30 – 120 t - Machine Weight: approx. 9 t - Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm Pedpfxjk S Dt To Aa Sogk - Table Height above Floor: 850 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Stroke: 400 mm - Opening per Level: 200 mm - Min. Opening: 200 mm ==== Table and Ram - Table Size: 600 × 600 mm - Ram Size: 600 × 600 mm - Heating Plates: 600 × 600 mm (optional) ==== Forces - Maximum Free Stripping Force: 200 kN ==== Speeds - Idle Speed: up to 40 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: 5 – 15 mm/s ==== Hydraulics - Operating Pressure: max. 240 bar - Pressure Build-up Time: approx. 4 sec - Pressure Build-up Time (steel on steel): max. 8 sec - Pressure Accuracy: ± 5 bar - Pressure Holding Valve: up to 1,800 sec - Automatic Pressure Readjustment - Oil Volume: approx. 300 l (HLP 46) - Main Pump: Bosch Rexroth gear pump approx. 48 l/min - Max. Oil Temperature: 55 °C - Max. Ambient Temperature: 40 °C ==== Cooling and Lubrication - Circulation Oil Cooling - Oil Temperature Monitoring - Automatic Lubrication ==== Heating System - Electrically heated plates up to 250 °C (optional) - Thermally neutral: 80 – 120 °C ==== Control and Operation - Control panel integrated in switch cabinet - Two-hand operation - Programmable setup mode - Single stroke adjustable - Free positioning of the ram - Travel limitation by pressure or position - Signal lamp (red/yellow/green) ==== Safety - Light curtains (SICK / Leuze, 14.1 mm, front side) - Monitored rear door - Machine body double-coated ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor: 15 kW - Total Connected Load: approx. 19 kW (without heating plates) ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing processes, hot pressing vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermo press, tryout press, tool tryout press

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1798, MONOBLOK PENGISIAN FIMER Tahun: 2003 Kecepatan: 2.500 botol/jam Model: SRT 12-12-1-S-VA-DEA Pedpoytn Tkofx Aa Sogk Arah kerja: searah jarum jam Pembilas: 12 penjepit Nozzle tetap Pengisi dengan tekanan rendah Jumlah katup: 12 Penutup putar kepala tunggal Jenis tutup: Gabus alami lurus dan tutup ulir Tutup ulir: 30x60 Format pengganti tutup yang ada Sistem vakum pada penutup Injeksi gas Format: Ø 76 mm Pelindung keselamatan Manual penggunaan termasuk Diagram kelistrikan termasuk Sertifikat Kesesuaian termasuk Suku cadang yang tersedia

Kondisi: bekas, Double Column Hydraulic Press SCHÖN Type SH 25 Machine No.: 4453 Year of manufacture: 1999 Pressing force: 25 t Column spacing: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Pgodpfxjw A Amrj Aa Sok Connection: 380 Volt, 50 Hz Equipment: - SICK safety light curtain, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid traverse and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press dwell extension 1-10 s (pressure holding time) - Time setting for return stroke speed - Blowing device prepared electrically, without air valve - Hydraulic tool safety, manually adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1,200 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table size: 1200 x 815 mm Table height above floor: 800 mm Ram size: 1100 x 700 mm Speed downward: from 48 mm/s Speed upward: 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Weight: 23.0 t Space requirement approx.: 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading according to CE standard with electro-hydraulic drive, pressure/time and stroke-dependent control, photoelectric safety guard at the front (Sick), two-hand operation Podsvzxphepfx Aa Sjgk

Tahun pembuatan: 2000, Kondisi: baik (bekas), Gebrauchte Amada TP150EX 150t Exzenterpresse / Stanzmaschine Amada TP150 EX elektrische Exzenterpresse mit Vorschubgerät Atkin BHP und Abwickelhaspel Atkin BHP Baujahr: 2000 Technische Daten: - Modell: Amada TP-150EX - Maschinengewicht: 16 Tonnen - Zubehör: Sick-Sicherheitseinrichtungen - Hydraulische Überlastsicherung - Stufenlos regelbarer Antrieb - Hydraulische Werkzeugklemmung - Presskraft: 150 Tonnen - Inbetriebnahme: Juli 2000 Pgjdpsn Smg Tefx Aa Sek - Hub: 175 mm - Tischfläche: 1250 x 750 x 160 mm - Stößelfläche: 700 x 550 mm - Stößelverstellung: 100 mm (motorisch) - Werkzeughöhe: 390 mm Ideal für Blechbearbeitung in der Automobil- und Luftfahrtindustrie. Neue C- und H-Rahmen-Pressen ebenfalls verfügbar.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 150 t, lebar kerja: 4.100 mm, jangkauan kerja: 4.100 mm, Verkauft wird eine gebrauchte, hochwertige und sehr präzise Edwards Pearson PR6 150/4100 CNC Abkantpresse. Baujahr: 2002 Achsen: 6 Achsen komplett mit Bombierung (Crowning) Kapazität: 4,1 m x 150 t / 4100 mm x 150 t Vollständig gewartet Späte PR-Serie, direkt vor der Bystronic-Abkantpressen eingeführt wurde Ausstattung: - Cybelec CNC-Steuerung mit Farbgrafiken - Achsen: Y1, Y2, X, R, Z1, Z2 - Max. Hub: 215 mm - Sick Infrarot-Lichtschranken - Komplettes Ober- und Unterwerkzeugsatz Die Maschine stammt aus einem Unternehmen, das für die Architekturbranche fertigt und wurde überwiegend zum Biegen von Aluminium eingesetzt. Neues Werkzeug für Ihre Produkte auf dieser Presse erhältlich. Maschine kann im Betrieb vorgeführt werden. Pgedpfx Aov Ub Elea Sek

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar kerja: 3.100 mm, jangkauan kerja: 3.100 mm, de Pedpfx Aov Iftgsa Sjgk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, daya: 15 kW (20,39 hp), panjang langkah: 215 mm, produsen pengendali: Cybelec, model controller: DNC 1200, gaya tekuk (maks.): 200 t, jumlah sumbu: 6, jenis mahkota: dikendalikan CNC, Perlengkapan: Penandaan CE, kendali jauh kaki, perkakas atas, perkakas bawah, sistem penjepitan alat Eropa, Dijual Pressbrake CNC Edwards Pearson PR6 200/4100 6 sumbu, bekas, berkualitas tinggi dan sangat presisi Pgjdpfxjx Avbye Aa Sjk Tahun: 2001 Model: PR6 200/4100 Total sumbu: 6 sumbu, lengkap dengan sistem crowning Kapasitas: 4,1m x 200ton / 4100mm x 200ton Sudah diservis secara menyeluruh Model Pr akhir sebelum Bystronic Clamp alat Euro atas Dilengkapi dengan: Kontrol CNC Cybelec dengan Grafik Warna Sumbu: Y1, Y2, X, R, Z1, Z2 Stroke maksimum 215 mm Pelindung cahaya inframerah Sick Satu set tooling atas dan bawah lengkap Dengan crowning

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 3.100 mm, gaya tekuk (maks.): 130 t, jenis kontrol: Kontrol CNC, jumlah sumbu: 6, Perlengkapan: Penandaan CE, penghadang cahaya keselamatan, perkakas atas, perkakas bawah, sistem penjepitan alat Eropa, Amada HFE CNC pressbrake bekas 3 meter x 130 ton untuk dijual JENIS HIDROLIK TEKAN TURUN KAPASITAS 130 TON SUMBU TERKONTROL Y1, Y2, X, R1, R2, Z1, Z2 PANJANG MAKSIMAL TEKANAN 3000 MM TINGGI TERBUKA 470 MM TAHUN 2001 PANJANG STROKE 200 MM KEDALAMAN LEHER Pgsdpfxjw Ugg Es Aa Sok 420 MM DAYA MOTOR 11 KW PELINDUNG DEPAN PELINDUNG ELEKTRONIK ERWIN SICK TERPASANG PADA MESIN SAMPING PEMBATAS PAGAR TERINTERLOCK BELAKANG PEMBATAS PAGAR TERINTERLOCK TONASE 1300 KN KECEPATAN PENDEKATAN 100 MM/DETIK KECEPATAN TEKAN 1–10 MM/DETIK KECEPATAN KEMBALI 1–100 MM/DETIK KAPASITAS OLI 110 LITER BERAT 7800 KG JARAK GESER BACKGAUGE (SUMBU X) 700 MM/S JARAK MAKSIMAL GAUGE 1000 MM

Kondisi: sangat baik (bekas), gaya penekanan: 100 t, lebar meja: 3.000 mm, panjang kerja: 3.000 mm, Gebrauchte, sehr hochwertige und äußerst saubere Ursviken EKP Optima 100 3.1 / 2.55 3-Meter x 100-Tonnen CNC-Abkantpresse zu verkaufen Gebrauchte Ursviken CNC-Abkantpresse zu verkaufen – Video am Ende der Anzeige Pullmax Ursviken Optima EKP CNC 100 3.1 / 2.55 Abkantpresse CNC Technische Daten: Presskraft: 100 t Pgsdpfx Astwyuusa Sek Biegelänge: 3100 mm / 3 Meter CNC-Steuerung: Cybelec DNC 7000 Insgesamt 6 Achsen Mit integriertem Bördeltisch zur Herstellung von Sicherheitskanten und Abkantungen auf 3 Meter Länge Hinteranschlag: 2 Anschlagfinger Komplett gewartet. Inklusive umfangreichem Werkzeugsatz gemäß Fotos ————— Gewicht: 8.400 kg Zustand: guter Zustand PULLMAX URSVIKEN EKP CNC 100 3.1 / 2.55 100 t x 3.100 mm hydraulische 6-Achs-CNC-Abkantpresse zu verkaufen Cybelec DNC 7000 Steuerung Sick-Schutzvorrichtungen Achsen: Y1, Y2, R, X, Z1 und Z2 – steuerbar über Cybelec Steuerung

Kondisi: bekas, Gebrauchte, günstige Amada ITS2 2,5m x 80t 7-Achs CNC-Abkantpresse Pgodpfxsfuaqms Aa Sjk ABKANTPRESSE HYDRAULISCH KAPAZITÄT: 80 TONNEN BIEGELÄNGE: 2500 mm STEUERUNG: OPERATEUR ANZAHL ACHSEN: 7 VORDERE SCHUTZEINRICHTUNGEN ERWIN SICK MASCHINENINTEGRIERT SEITLICHE UND HINTERE / SICHERHEITSUMZÄUNUNG VERRIEGELT

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar meja: 1.500 mm, panjang meja: 1.000 mm, lebar pelat tuas: 1.500 mm, kecepatan mundur: 10 mm/dtk, panjang pelat penekan: 1.000 mm, jarak pergerakan sumbu X: 1.200 mm, jenis arus masuk: AC (pendingin udara), gaya penekanan: 40 t, daya: 9 kW (12,24 hp), Perlengkapan: penghadang cahaya keselamatan, Die-Casting and Tryout Press – Hidrobrasil Manufacturer – 40 t Sliding Table Press – Table 1,500 × 1,000 mm A hydraulic tryout press from Hidrobrasil with a pressing force of 40 t is available for sale. The machine is designed as a mold opener/closer and is equipped with an extendable table, a rotatable ram, and a large installation height of 1,800 mm, making it particularly suitable for spotting, fine-tuning, and tryout operations with heated dies. ==== Technical Data & Information: Tryout Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Tryout Press - Type: Sliding Table Press / Mold Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Machine height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: to customer specification ==== Table System - Table extension: 1,200 mm - Table traverse speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control - Monitor: 10" in control cabinet - Pressure setting and warning messages via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety Pgjdpfx Astwmp Sja Sek - Safety components from SICK ==== Equipment - Insulation of clamping plates (resin insulation plate + ventilation plate) - Individual paint finish as per customer specification - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ==== Spotting work, die fine-tuning, die tryout, mold making, tool making, tryout operations, tuning processes, heated dies Tryout Press, Tool Testing Press, Sliding Table Press, Mold Opener, Tryout Press, Tool Adjustment Press, Tool Tryout Press, Testing Press, Hydraulic Press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds upon these standards. Our key strength lies in custom machine building and press automation. We supply tailored hydraulic presses at surprisingly affordable prices. Our presses are equipped predominantly with components from leading European manufacturers.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, gaya penekanan: 400 t, Hidrobrasil double-column press – 400 t – 1,500 × 1,500 mm – Sliding table press with ejector For sale is a hydraulic double-column press with sliding table from Hidrobrasil, offering a pressing force of 400 t. This machine is designed for demanding forming and pressing operations and, thanks to its movable table and integrated ejector, provides high flexibility in tool handling. With modern controls, high precision, and comprehensive safety equipment, it is ideally suited for industrial series production and complex applications. ==== Technical Data + Information: Hydraulic double-column press – sliding table press – 400 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-column press - Machine type: Sliding table press - Construction: Double-column design - Pressing force: 400 t (4,000 kN) Podoph Uk Nepfx Aa Ssgk - Machine weight: approx. 28 t - Dimensions (L × W): approx. 3,800 × 4,475 mm - Height: approx. 4,300 mm - Number of operator sides: 1 ==== Working Area - Max. opening width: 800 mm - Stroke: 800 mm - Table height above floor: 1,100 mm - Minimum hall height: 5,500 mm - Parallelism deviation: ± 0.1 mm ==== Table & Ram - Table size: 1,500 × 1,500 mm - Ram size: approx. 1,600 × 1,500 mm - Table plate precision-milled with T-slots (DIN 650-22) - Ejector in table: 20 t / 350 mm stroke - Ejector moves outward with the table ==== Speeds - Closing speed: up to 100 mm/sec - Opening speed: up to 100 mm/sec - Pressing speed: 3–10 mm/sec ==== Hydraulics & Performance - Operating pressure: max. 300 bar - Main pump: Bosch Rexroth axial piston pump (approx. 145 l/min) - Auxiliary pump: Bosch Rexroth gear pump (10 l/min) - Pressure holding: up to 300 sec - Main motor: 40 kW - Oil volume: approx. 1,000 l - Oil temperature monitoring: warning at 55 °C, shutdown at 60 °C ==== Controls & Operation - Control: Siemens S7-1200 - Touchscreen: 9" monitor - Remote maintenance: SECOMEA Ethernet - Operating modes: setup, single stroke, automatic/cycle - Pressure adjustment: 60–400 t via touchscreen - Stroke limit via pressure or position - Free positioning of ram - Swiveling control panel - Two-hand operation with function selector ==== Safety & Equipment - Light curtains: SICK / PILZ (14 mm, up to 1,800 mm height) - Hydraulic and mechanical ram locking - Automatic lubrication - Recirculating oil cooling - Side doors with viewing windows (1,000 × 800 mm) ==== Construction & Features - Precise deflection: ≤ 0.2 mm/m - Robust construction for continuous operation - Suitable for demanding forming and series production processes ===== Forming, series production, toolmaking, pressing operations, sheet metal processing Hydraulic press, double-column press, sliding table press, industrial press, forming press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our great strength lies in special machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics are equipped predominantly with components from leading European manufacturers.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, gaya penekanan: 400 t, HIDRALMAC Four-Column Hydraulic Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Drawing Cushion For sale is a hydraulic four-column press (deep drawing press) manufactured by HIDRALMAC, offering pressing force up to 400 t. This machine is specifically designed for demanding deep drawing and forming applications, featuring a powerful drawing cushion along with advanced control and safety technology. Due to its robust construction and comprehensive equipment, it is an ideal solution for industrial series production and complex forming tasks. Pgodjin Et Nspfx Aa Sjk ==== Technical Data & Details: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine type: Deep Drawing Press - Design: Four-column press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Daylight width: 2,500 mm - Installation height: 1,300 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Slide - Table size: 2,500 × 1,600 mm - Slide size: 3,100 × 1,600 mm - Column diameter: 220 mm - Return force: 40 t - T-slots: according to DIN 650-22 (customizable) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Drawing Unit - Drawing cushion: 1,400 × 800 mm - Drawing cushion force: 30–60 t - Drawing cushion stroke: 250 mm - Drawing cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW - Oil tank: 1,500 l - Oil volume: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure build-up: up to 400 t within max. 4 seconds - Pressure control: adjustable via monitor ==== Controls & Operation - Control system: Siemens - Monitor: Siemens 12" - Modes of operation: manual, semi-automatic, fully automatic - Travel control adjustable via monitor - Remote monitoring/maintenance - Two-hand operation on movable stand - Wall-mounted electrical cabinet ==== Safety & Equipment - Safety PLC for hydraulic block monitoring - Front and rear light sensors: SICK (1,300 mm) - Side safety doors left and right (1,000 × 800 mm each) - Interior LED lighting - Energy monitoring system (idle load reduction to approx. 2 kW) ==== Construction - Sturdy welded steel structure - Machine steel: ASTM A36 - Induction-hardened and chrome-plated piston rods - Low maintenance and reliable - CE certificate - Documentation in German ==== Deep Drawing, Forming Technology, Series Production, Sheet Metal Forming, Toolmaking Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Looking for a hydraulic press customized to your application? Contact us for a tailored offer. Our core strength is special purpose machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we use mainly components from leading European manufacturers.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 400 t, Hidrobrasil Four-Column Press – 400 t – 2,700 × 1,700 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from the manufacturer Hidrobrasil, offering a pressing force of 400 t. Designed for continuous shift operation, this machine features a powerful twin-cylinder design with piston accumulator for exceptionally dynamic operation combined with efficient energy use. Thanks to extensive automation and adjustment options, this press is ideally suited for demanding production and forming processes. ===== Technical Data & Information: Hydraulic Four-Column Press – 400 t ==== General Information Pgodpfog Iihwsx Aa Sjk - Manufacturer: Hidrobrasil - Model: Four-Column Press - Type: Hydraulic column press - Machine designation: Production press - Pressing force: 400 t (4,000 kN) - Machine weight: approx. 52 t - Overall height: approx. 5,700 mm - Number of operator sides: 2 ==== Working Area - Max. opening: 1,600 mm - Stroke: 1,000 mm - Min. opening: 600 mm - Table height above floor: 820 mm - Minimum tool height: 600 mm ==== Table & Ram - Table size (clamping surface): 2,700 × 1,700 mm - Total table size: 3,400 × 1,700 mm - Ram size: 3,400 × 1,700 mm - Column diameter: 250 mm - T-slots: 28 mm (as per customer specification) - Table plate milled flat ==== Speeds - Closing speed: 100–450 mm/s - Opening speed: 50–250 mm/s - Pressing speed: 5–60 mm/s ==== Hydraulics & Drive - Hydraulic components: Bosch Rexroth / Parker / HAWE - Main motor output: 90 kW - Piston accumulator with approx. 4 nitrogen bottles - Circulation oil cooling (adjustable) - Pressure-holding valve: 0–600 sec. - Pressure build-up time: max. 2 sec. - Pressure precision: ± 5 bar ==== Control & Operation - Control: Siemens S7-1500 - Touchscreen: 15" Siemens - Operator panel: swiveling - Operating modes: Setup, single stroke, continuous stroke, program operation - Pressure adjustment: 50–400 t via touchscreen - Stroke limitation via pressure or position - Free positioning of ram - Siemens remote maintenance unit (SECOMEA Ethernet) ==== Equipment - Automatic lubrication (adjustable) - Oil temperature monitoring (adjustable) - KEYENCE light curtains (14 mm) front and rear - Safety components from SICK - Side-protected doors with monitoring (1,200 × 1,000 mm) - Two-hand control units on both sides - Prepared for automatic material feeding - RITTAL control cabinet (can be positioned up to 20 m away) - Stress-relieved components (table, ram, press head) - Machine body primed and painted ==== Accuracy - Parallelism deviation: ± 0.1 mm - Deflection: ≤ 0.17 mm/m ===== Forming technology, deep drawing, pressing operations, series production, large part manufacturing, automated production Hydraulic press, four-column press, column press, production press, industrial press, forming press Looking for a hydraulic press tailored to your specific application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety directive NR 12, which builds upon these standards.

Tahun pembuatan: 2021, Kondisi: baru, gaya penekanan: 50 t, Hidrobrasil Laboratory Press – 50 t – Vulcanizing Press – 200 × 200 mm – up to 250 °C Pgsdpfxsgrkigo Aa Sek For sale is a hydraulic laboratory vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t. The machine is specifically designed for thermal laboratory processes and enables precise control of pressure, position, and speed via modern Siemens technology. With its compact design, integrated hydraulics, and monitored safety features, the press is ideal for reproducible tests and small batch production. ==== Technical data & information: Hydraulic Laboratory Vulcanizing Press – 50 t ==== General information - Manufacturer: Hidrobrasil - Model: Laboratory Press - Machine designation: Vulcanizing Press - Type: Downstroke press - Pressing force: 50 t - Machine weight: approx. 1,500 kg - Machine height: approx. 1,950 mm ==== Working area - Daylight opening: 400 mm - Stroke: 300 mm - Heating plate size: 200 × 200 mm ==== Heating system - Heating plate capacity: up to 250 °C ==== Hydraulics - Hydraulic system integrated into press frame - Oil tank: 100 l ==== Control & operation - Control system: Siemens S7-1200 - Touchscreen: Siemens, 9-inch - Adjustable: pressure, position, speed ==== Safety - Safety technology: SICK - Monitored vertical safety door for the press area ===== Laboratory applications, vulcanization, hot pressing, materials testing, test series Hydraulic press, vulcanizing press, heating press, laboratory press, test bench press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual quote. Our hydraulic presses are manufactured in compliance with German Machinery Directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our main strength lies in special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0362, gaya penekanan: 250 t, Hidrobrasil Four-Column Press – 250 t – 1,800 × 1,600 mm – Sliding Table For sale is a hydraulic four-column press from Hidrobrasil with a pressing force of 250 t and an integrated sliding table. This machine is ideal for assembly, forming, and series production processes where convenient workpiece access and precise parallelism are required. With its extensive equipment—such as oil cooling, energy-saving features, and optional safety systems—it is designed for continuous industrial operation. ==== Technical Data & Information: Hydraulic Four-Column Press – 250 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: Four-Column Press - Machine type: Sliding table press - Design: Four-column press - Pressing force: 250 t - Machine weight: approx. 24 t - Total power requirement: 22 kW - Dimensions (L × W × H): approx. 3,390 × 3,400 × 3,800 mm - Column diameter: 160 mm Podpfx Aasfxyins Segk ==== Working Area - Pass-through width: 1,800 mm - Maximum working height: 800 mm - Stroke: 600 mm ==== Table & Ram - Table size: 1,800 × 1,600 mm - Ram size: 2,350 × 1,600 mm - Table height above floor: approx. 900 mm - Max. table load: 5 t - Hydraulic table traverse: 25 mm/sec - Return force: 25 t ==== Speeds - Advance speed: 10 mm/sec - Pressing speed: 10 mm/sec - Return speed: 25 mm/sec - Rapid traverse: 10 mm/sec ==== Hydraulics & Equipment - Oil tank: 600 l - Recommended oil: 46 grade / 10 µ - Electric oil cooling: 1.5 kW (max) - Separate cooling circuit with automatic activation - Permanent filtration circuit (approx. 1.5 kW power consumption) - Main pump energy-saving function ==== Control & Safety - Monitor: Siemens, 10 inch - Safety options: SICK / Pilz / Schmersal - Parallelism monitoring via position measurement systems (Balluff / SICK) - Control cabinet with approx. 40% capacity reserve ==== Construction & Additional Features - Vibration damper pads (4 × 450 × 450 × 85 mm) - Galvanized and zinc-coated connecting elements - Oil drip tray for maintenance - Noise emission: max. 67 dB ==== Accessories - 2 roll-on loading bridges (each 1,500 mm, removable) ===== Assembly, forming, series production, sliding table applications, metalworking Hydraulic press, four-column press, sliding table press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these regulations. Our core expertise is in special-purpose machine construction and press automation. We supply customized hydraulic presses at surprisingly affordable prices. For the hydraulic components in our presses, we predominantly use parts from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 4303, gaya penekanan: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from Hidralmac with a pressing force of 500 t. This machine is designed for demanding forming processes in continuous industrial operation. Thanks to its multi-cylinder technology, high dynamics, and extensive control and monitoring functions, it provides a precise and powerful solution for complex applications. ==== Technical Data & Information: Hydraulic Four-Column Press – 500 t ==== General Information - Manufacturer: Hidralmac - Model: Four-Column Press - Design: Hydraulic column press - Machine designation: Forming press - Pressing force: 500 t (max. 550 t with reserve) - Machine weight: approx. 39 t - Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm ==== Working Area - Pass-through width: 2,100 × 1,500 mm - Installation height: 1,500 mm - Stroke: 1,000 mm - Table height above ground: approx. 850 mm ==== Table & Ram - Table size: 2,100 × 1,500 mm (with T-slots) - Ram size: 2,100 × 1,500 mm - Total table plate size: approx. 2,750 × 1,600 mm - Total ram plate size: approx. 2,750 × 1,600 mm ==== Speeds - Approach speed: 300 mm/s - Return speed: 300 mm/s - Pressing speed: - 200 t: 28 mm/s - 300 t: 20 mm/s - 500 t: 6 mm/s ==== Hydraulics & Drive - Total power requirement: 62 kW - Return force: 40 t - Main cylinders: 2 units - Auxiliary cylinders: 2 units - Axial piston pump: Bosch Rexroth A4VSO125 (approx. 290 l/min) - Hydraulic block: Rexroth - Oil tank volume: approx. 2,000 l - Pressure control via PLC (min. 50 t) - Pressure hold time: 0–900 sec - Energy-saving via automatic pump shut-off at tool closure ==== Ejector & Auxiliary Systems - Ejector: 4 × 15 t at 250 bar - Ejector stroke: 300 mm (PLC adjustable) - Ejector speed: - Forward: 95 mm/s - Return: 240 mm/s ==== Control & Electrical - Control: Siemens S7-300 - Monitor control with programmable pressure and travel - Storage capacity: up to 200 programs - Electronics: Siemens / Möller - Operator panel on swivel arm - Voltage: 400 V / 50 Hz - Control voltage: 24 V ==== Safety & Monitoring - Light sensors from SICK (1,500 mm, front side) - Monitoring of hydraulics, pumps, and temperature - Synchronous monitoring of main cylinders with automatic adjustment Psdpfodyynvsx Aa Sjgk - Pressure monitoring with automatic return or hold function (± 5 %) ==== Construction & Features - Column diameter main cylinder: 360 mm - Column diameter auxiliary cylinder: 120 mm - Material: ASTM A36, manufactured according to DIN 8651 - Polycarbonate safety glazing (8 mm) in the work area and on doors - Liquid channel surrounding the table (25 mm radius) ==== Auxiliary System - Nitrogen compression system (up to 280 bar, can be activated) ===== Forming technology, heavy forming, series production, large part machining, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, forming press, industrial press, production press

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, lebar meja: 1.000 mm, panjang meja: 600 mm, Hidrobrasil Double-Column Hydraulic Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double-column press (H-frame) from Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small batch production applications, standing out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical Data & Information: Hydraulic Double-Column Press – 40 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Design: H-frame / Double-column press - Machine designation: Small-batch press / Calibration press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working Area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Ram - Table area: 1,000 × 600 mm - Ram area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 pcs.) - T-slots and holes: as per customer requirements ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic block and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for the hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at the top rear ==== Control & Safety - Control via sensors - Safety light barriers - Protective enclosure (door) at rear - Internal lighting in work area - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz Podpfoxrby Hsx Aa Segk - Components: Siemens, Allen Bradley, SICK ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30% - Cooling: air cooling - Internal lighting: available - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible manufacturing Hydraulic press, double-column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with the Brazilian national safety guideline NR 12, which is based on these standards. Our key strength is special machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 2019, gaya penekanan: 250 t, Hidrobrasil Four-Column Hydraulic Press – 250 t – 3,090 × 1,500 mm – Stroke 500 mm For sale is a four-column hydraulic press from Hidrobrasil with a pressing force of 250 t. This machine is designed for industrial production processes in continuous operation and offers a powerful and efficient solution for demanding forming and pressing applications, thanks to high operating speeds, large clamping surfaces, and extensive safety and energy-saving features. ===== Technical Data & Information: Four-Column Hydraulic Press – 250 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-column press - Design: hydraulic column press - Machine type: production press - Pressing force: 250 t (at 220 bar) - Machine weight: approx. 39 t - Dimensions (L × W × H): 2,720 × 3,750 × 4,350 mm - Noise level: max. 75 dB ==== Working Area - Clearance width: 2,500 mm - Max. working height: 800 mm - Stroke: 500 mm - Table height above floor: approx. 1,000 mm ==== Table & Ram - Table size: 3,090 × 1,500 mm - Ram size: 3,090 × 1,500 mm ==== Speeds - Advance speed: 400 mm/s - Return speed: 400 mm/s - Rapid traverse: 400 mm/s - Pressing speed: 50 mm/s (at 125 t) ==== Hydraulics & Drive - Total power requirement: 60 kW - Return force: 25 t - Pump capacity: max. 176 l/min - Oil tank volume: 1,500 l - Oil cooling: electric, max. 3 kW - Recommended oil: ISO VG 46 - Hydraulic components: Bosch Rexroth / Parker / Hydac ==== Control & Electrical - Control: Siemens - Monitor: Omron, 12" - Control cabinet with approx. 40% reserve capacity - Control cabinet components: Schneider ==== Features & Special Equipment - Vibration damping pads (4 × 450 × 450 × 85 mm) - Roller loading bridges (2 × 1,500 mm, removable) - Automatic oil cooling system (activates at 40 °C) - Separate filter circuit (1.5 kW for continuous operation) - Energy saving function for main pump (approx. 2 kW in standby) - Oil collection tray for hydraulic components - Galvanized or electroplated bolts ==== Safety & Monitoring - Safety technology by Pilz Pgjdjd Nq Idopfx Aa Sek - Light curtains from Pilz - Cylinder parallelism monitoring (Balluff & SICK measurement systems) - Precision cylinder control with fast valves - Parallelism accuracy < 1 mm across full width ===== Forming technology, series production, large component processing, pressing processes, industrial manufacturing Hydraulic press, four-column press, column press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed both Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which is based on these standards. Our greatest strength lies in special-purpose machinery manufacturing and press automation. We provide custom-built hydraulic presses at unexpectedly competitive prices. Only components from leading European manufacturers are used in the hydraulic systems of our presses.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, daya: 22 kW (29,91 hp), tegangan masuk: 400 V, arus masuk: 32 A, jenis arus masuk: tiga fasa, gaya penekanan: 20 t, panjang total: 2.400 mm, lebar total: 1.500 mm, tinggi total: 2.400 mm, berat keseluruhan: 2.000 kg, suhu lingkungan (min.): 10 °C, suhu lingkungan (maks.): 40 °C, panjang kabinet kontrol: 60 mm, lebar kabinet kontrol: 80 mm, jenis penyesuaian ketinggian: hidrolik, Perlengkapan: dokumentasi / manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) manufactured by Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. This machine is ideal for tablet manufacturing as well as precise pressing and forming processes for smaller production runs and laboratory applications. ===== Technical Data + Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-column press - Machine type: Tablet press - Design: C-frame / single-column press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Overall height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Fast closing: 120 mm/sec - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Controls & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optional foot control - Safety design according to EU standards and UVV ==== Equipment - Table plate designed as a tray with 50 mm rim and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Function - Multi-tool: 8 punch rams - Capacity: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Pgodpfxotv Ewds Aa Ssk Hydraulic press, hydraulic tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety directive NR 12, which builds on these standards. Our core strength lies in special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we mainly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: -, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press from the manufacturer Hidrobrasil with a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured and customized in the short term, and is ideally suited for straightening, assembly, pressing, and extraction work. ===== Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Maximum opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Version: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Max. operating pressure: 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank volume: 120 l - Hydraulic block / valves: Hydropack - Pressure display: Manometer - Pressure adjustment: adjustable - Pressure switch: available - Power unit: side-mounted ==== Operation - Manual lever control - Sensitive speed adjustment - Pressure adjustment via rotary knob ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Operating mode switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Features and Special Characteristics - Integrated tool holder in the ram (up to Ø 250 mm) - Customizable table design - Structure can be tailored to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 Psdpsyia D Refx Aa Sogk - EN ISO 4413 ===== Straightening, assembly, press-fitting, extraction work, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, press-fitting press, frame press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machine directives, as well as European directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the Brazilian national safety directive NR 12, which builds on these standards. Our great strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, nomor mesin/kendaraan: 4293, gaya penekanan: 40 t, Tuschierpresse – Manufacturer Hidralmac – 40 t Tryout Press – Table 1,000 × 700 mm For sale is a tryout press from the manufacturer Hidralmac with a pressing force of 40 t. The machine features an extendable and tiltable table (up to 45°), an installation height of 1,200 mm, as well as a precisely controllable hydraulic system, and is especially suitable for spotting, adjustment, and tryout operations in tool and mold making. ==== Technical Data & Information: Tryout Press Hidralmac – 40 t Tryout Press ==== General Information - Manufacturer: Hidralmac - Model: Tryout Press - Type: Tryout / Spotting Press - Pressing Force: 40 t - Machine Weight: approx. 8.5 t - Dimensions (L × W × H): 4,300 × 2,700 × 4,500 mm ==== Working Area - Installation Height (Table – Ram): 1,200 mm - Area Between Columns: 1,250 × 1,000 mm - Stroke: 1,200 mm - Table Height Above Floor: 700 mm ==== Table System - Table Size: 1,000 × 700 mm - Table Extension: 1,200 mm - Table Tilting: up to 45° - Table Travel Speed: 25 mm/s - Max. Table Load: 5 t ==== Tool Holder - Upper Tool Foldable: 170° ==== Hydraulics and Drive - Number of Cylinders: 1 - Column and Cylinder Material: SAE 1045 (C45), induction hardened and chrome plated ==== Speeds - Approach Speed: max. 95 mm/s - Return Speed: 80 mm/s - Working Speed: 0 – 10 mm/s and 10 – 155 mm/s ==== Control System - Siemens Monitor: 9 inches - Linear measurement system for position monitoring - Adjustable: Travel path, stopping points, changeover points - Working speed freely programmable - Control system monitors hydraulics, pump, and safety areas - Separate control cabinet - Operator panel on swivel arm ==== Safety - Light sensors (SICK): 1,200 mm ==== Scope of Delivery - CE Declaration (2006/42/EC) - Manuals and operating instructions ===== Spotting operations, die adjustment, tryout operations, mold making, toolmaking, tryout processes, adjustment processes Pjdpfjdxrqxox Aa Sjgk Spotting press, tryout press, tool tryout press, die spotting press, tryout press, hydraulic press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our major strength is in special-purpose machinery and press automation. We supply customized hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we use components primarily from leading European manufacturers.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, AMADA MODEL HFE 103-3, press brake hidrolik dengan kapasitas 100 ton dan panjang tekuk 3000 mm, dilengkapi kontrol CNC OP 2000 7 AXIS, penjaga elektronik ERWIN SICK terpasang di mesin, serta pagar pengaman samping dan belakang dengan interlock. Pgedeyt H Awepfx Aa Sok

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 40 t, Tryout press – Manufacturer HIDRALMAC – 40 t – Table 1,000 × 700 mm For sale is a ready-to-use hydraulic tryout press from HIDRALMAC with a pressing force of 40 t. The machine features an extendable, tiltable, and rotatable table, an installation height of 1,200 mm, and a modern monitor-based control system. It is ideally suited for spotting, adjustment, and tryout operations in tool and mould making. ==== Technical Data & Details: Tryout Press HIDRALMAC – 40 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Tryout Press - Type: Tryout press / Spotting press - Pressing force: 40 t - Machine weight: approx. 9 t - Space requirement: approx. 4,000 × 4,400 × 1,800 mm ==== Working Area - Installation height: 1,200 mm - Stroke: 1,050 mm ==== Table System - Table size: 1,000 × 700 mm - Table extendable: 1,050 mm - Table tilt: up to 50° - Table rotation: 180° - Table travel speed: 25 mm/s - Max. table load: 5 t ==== Tool Mounting - Upper tool foldable: up to 180° - Ram plate hydraulically foldable: up to approx. 175° ==== Hydraulics & Drive - Main cylinder: 1 unit - Hydraulics: Bosch Rexroth - Motors: WEG ==== Speeds - Approach speed: 100 mm/s - Return speed: 100 mm/s - Working speed: 0 – 10 mm/s (adjustable) ==== Control - Siemens control with monitor (9") - 200 memory slots Pgodpfx Aajhtm E Nj Sek - USB interface - Remote function for remote maintenance - Adjustable: pressure, travel, speed - Linear measurement system for position monitoring - Programming of stop and switching points ==== Safety - Light sensors SICK (1,250 mm) - Complete monitoring of the working area ==== Equipment - Operator panel on swing arm - Two-hand operation on a movable stand - Interior lighting - Control cabinet left of the machine - Maintenance balcony with marine ladder - Robust welded construction acc. DIN 8651 - Columns and cylinder made from SAE 1045 (C45), induction-hardened and chrome-plated ==== Scope of Delivery - CE certificate - Operating manual and technical documentation (German) ==== Spotting operations, tool adjustment, tool tryouts, mould making, tool making, tryout processes, adjustment procedures, tool handling Spotting press, tool trial press, tryout press, tool adjustment press, tool try-out press, hydraulic press Looking for a hydraulic press tailored to your specific application? Contact us for an individual offer! Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed both Canadian and European safety requirements, as they also fully comply with the Brazilian national safety directive NR 12, which builds upon these standards. Our great strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly attractive prices. The hydraulics of our presses predominantly use components from leading European manufacturers.