Beli Stapler Center Fritz Gmbh Troli Transportasi Industri Platform bekas (105.381)

Kondisi: bekas, Technical details: Sheet thickness: 1 mm Gap between uprights: 2,255 mm Maximum bending angle: 130 ° Total power requirement: 2.25 kW Machine weight approx.: 1,400 kg Machine dimensions approx. (LxWxH): 2.7 x 1.15 x 1.3 m Bodpfx Aewq I U Rjiyjlh Machine without foot switch, but pre-wired for one. The previous owner retrofitted the upper beam for 60 mm adjustment; greater heights only possible by reverting the modification. Foot control is missing for automatic operation. Manual operation is functional. No back gauge.

Kondisi: bekas, Technical details: Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Longitudinal table travel: 1250 mm Table rotation: 360° Table positioning: 4x90° Blsdpou N D Szofx Aiysh Longitudinal feeds: 0.63 – 2,000 mm/rev Total power requirement: 6 kW Machine weight approx.: 7.6 t Machine dimensions (LxWxH): 3.82 x 2.25 x 0.92 m Conventional boring mill table *

Kondisi: bekas, Technical details: Table length: 2000 mm Bedpfx Aieu N Ebdoyelh Table width: 1800 mm Table load capacity: 12.5 t Table longitudinal travel: 1250/1400 mm Table rotation: 360° motorized Table positioning: 4x90° Feed rate – longitudinal: 0.63 - 2,000 mm/min Height above floor: 920 mm Voltage: 380 V Total power requirement: 6 kW Machine weight approx.: 7.6 t Machine dimensions (LxWxH): 3.8 x 2.25 x 0.95 m Conventional boring mill table, operated via control panel T-slots according to DIN 650: a = 28 mm; h = 49 mm; b = 52 mm; c = 21 mm

Kondisi: bekas, Tahun pembuatan: 2010, en Bsdpfsytcf Uex Aiyjlh

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.064 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 50 W, jenis pendinginan: udara, lebar total: 1.500 mm, tinggi total: 2.050 mm, panjang total: 900 mm, jangkauan kerja: 600 mm, berat keseluruhan: 120 kg, masa garansi: 12 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, panjang meja: 600 mm, lebar meja: 600 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, tinggi kerja: 950 mm, frekuensi input: 50 Hz, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 50-watt fiber laser. In many industries, the use of a laser for permanent marking has become indispensable. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no advanced programming skills required. The software automatically increments serial and part numbers according to your specifications. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. Use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber Laser 50 Watt • Laser Class 1 • Wavelength 1064nm • Marking field size 150x150mm • Signal lamp to indicate operating status Bledpfx Aisy Urpysyoh • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction system (incl. activated carbon filter) • Marking software EZCAD in German / English (other software available on request) • Pilot laser (easy preview, readable text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Aluminum profile frame • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.550 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jarak gerak sumbu Z: 300 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.050 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is indispensable for permanent marking. Bsdpoxd Az Nsfx Aiyslh The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software according to preset parameters. In addition, the software is capable of reading data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. Use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150 mm (larger options available) • Signal light to indicate operational status • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Extensions for large workpieces (single- or double-sided) • Marking software EZCAD in German / English • Pilot laser (easy preview, plaintext preview) • Focus finder (simple focus adjustment) • Maximum workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, panjang total: 900 mm, lebar total: 1.550 mm, tinggi total: 1.900 mm, tegangan masuk: 230 V, daya laser: 30 W, panjang gelombang laser: 1.064 nm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), Laser for Product Marking – The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking tasks. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser is essential in many industries. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. The software automatically increments serial and article numbers after initial setup. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use with a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are possible. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) Bsdpfeunh H Sox Aiyolh • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – system for automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operation status indication • Max. component height approx. 300mm • Electronically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and height-adjustable keyboard tray • Frame made of aluminum profiles • Air-cooled • Door width approx. 700mm / door pass-through height: 400mm • 230V connection • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, berat keseluruhan: 160 kg, panjang total: 1.300 mm, lebar total: 800 mm, tinggi total: 1.930 mm, tegangan masuk: 230 V, frekuensi input: 50 Hz, panjang gelombang laser: 10.600 nm, jenis arus masuk: AC (pendingin udara), jenis laser: Laser CO₂, Perlengkapan: pencahayaan, With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without extensive programming knowledge. Serial and article numbers are automatically incremented by the software, after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side-mounted arms for marking long components, are available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10640 nm • Marking field size: 220x220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction system (including activated carbon filter) • Optional: Extensions for large workpieces (double-sided possible) • Marking software EZCAD (German / English) • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height: approx. 300 mm • Electrically adjustable Z-axis • Laptop with mounting bracket and Windows operating system • Frame made of aluminum profiles • Air-cooled • Door width: approx. 720 mm / door height: 400 mm • Power supply: 230 V Blodpfx Aswkpyheiyoh • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 45 kg, panjang total: 600 mm, lebar total: 400 mm, tinggi total: 690 mm, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 20 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Its compact design makes the system highly practical and suitable for use anywhere. The device is very easy to operate without any programming knowledge required. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and no extensive programming expertise. Serial and article numbers are automatically incremented by the software after prior configuration. Furthermore, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Bledpfjy Emthex Aiysh - Fiber laser 20 watts (Optional: 30 watts, 50 watts) - Laser class 1 - Wavelength 1064nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 100 kg, panjang total: 800 mm, lebar total: 600 mm, tinggi total: 1.660 mm, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 20 W, panjang gelombang laser: 1.064 nm, jenis pendinginan: udara, jenis laser: laser serat, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is designed for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many sectors. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers after presetting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long components, can also be implemented. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength: 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measurement system • Optional: Fume extraction (including activated carbon filter) • Optional: Autofocus system – automatic focus distance detection • Signal beacon for operating status display • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (work level adjustment) • Frame made of aluminum profile • Connection: 230V • Air-cooled Bjdpfx Ajv Sybyoiyjlh • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, tahun perombakan terakhir: 2025, Technical Data Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (infeed chute): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Blsdpfx Aey Urvaoiysh Total current consumption: 70 A Output for empty beverage cans with: - one press stroke: approx. 1.7 t/hour - two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight of press: approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant S355 steel Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal scrap, steel sheet, as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press was completely overhauled in our workshop. The press is in very good condition - see the functional video after refurbishment. During relocation, the machine sustained transport damage: the control cabinet was hit by a forklift and is slightly dented, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Notes: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is available. Viewing by appointment is possible. We are not liable for technical data or possible errors.

Kondisi: bekas, en Bodjy Urtfepfx Aiyjlh

Kondisi: baik (bekas), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina výroby: Západné Nemecko (Kelberg / Eifel) Typ: jednozávitovkový plastový extrudér Dokumentácia: Súčasťou dodávky (pôvodný nemecký manuál a korešpondencia z roku 1987) Stav: Použitý, ale kompletný a funkčný Miesto uloženia: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer závitovky: 30 mm L/D pomer: 25 D Hlavný motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot/min) Bodjxu E E Sspfx Aiyelh Napájanie: 3 × 380–420 V / 50 Hz Riadiace napätie: 220 V Chladenie: Vzduchom chladený valec s vykurovacími zónami Riadiaca skriňa: Súčasťou dodávky, vrátane relé, ističov a analógových meradiel Popis: Kompaktný, jednozávitovkový laboratórny alebo malosériový extrudér od spoločnosti Plastik-Maschinenbau GmbH vyrobený v Západnom Nemecku. Určený na spracovanie termoplastických materiálov, testovanie materiálov alebo pre menšie extrúzne linky (napr. výroba hadičiek, profilov alebo na poťahovanie). Obsahuje originálny elektrický rozvádzač, manometer a kompletnú dokumentáciu. Po mechanickej aj elektrickej stránke je kompletný, vyžaduje už len štandardné uvedenie do prevádzky.

Kondisi: bekas, Tahun pembuatan: 1986, Mesin: TC800 Nomor seri: 25132 Tahun pembuatan: 1986 Pengendali: Sinumerik System 8. Spindel alat: SK50 Perjalanan sumbu X: 1600 Y: 1000 Z: 1100 Sistem pengukuran optik pada sumbu X, Y, Z 2 palet, luas meja: 800x800 Bsdpfx Aiox Eyt Ujyelh Sistem pergantian palet Majalah alat: 60 alat Catu daya: 380V 50Hz 55kW.

Kondisi: bekas, Tahun pembuatan: 2009, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 600 mm Dimensions (LxWxH): 6,400 x 3,200 x 3,100 mm Weight approx.: 10,500 kg Waterjet Cutting System Stein-Moser GmbH CNC 5-axis 4020 x 2020 x 600 mm Technical specifications: - Working range X, Y 2D: 4,020 x 2,020 mm - Support surface X, Y: 4,400 x 2,400 mm - Z-axis: 600 mm - Swivel range A, B: +/- 46° - Rotational axis C, 360° rotatable: +/- 3,600° - Positioning speed: 10 m/min - Repeatability: +/- 0.1 mm - Pneumatic connection: min. 6.5 bar - Water connection: 2 – 5 bar - Machine dimensions LxWxH: 6,400 x 3,200 x 3,100 mm - Weight (with water): approx. 10,500 kg - Operating temperature: +10°C to +40°C - Max. operating pressure high-pressure waterjet unit: 4,000 bar TOOLS / SPARE PARTS WORTH APPROX. €25,000 INCLUDED. Original price approx. €300,000 for the waterjet system 3 tons of cutting sand included. Series: WS2040HB/090601 Type: WS 2040 HB Tank 4.2 PC cabinet (Rittal) on castors with climate control, fitted with: servo controller, TYM NUM AXIUM POWER, drive system NUM MDLU 3, control PC, monitor, water-resistant keyboard and mouse, handheld device for manual operation of the system - Connected load: 400 V AC, 16 A - Control voltage: 24 V DC Servo controller NUM AXIUM POWER: - Central unit for CNC, PLC, and communication functions - Decentralized I/O modules with 32/32 digital inputs/outputs via fiber optic Drive system MDLU 3: - Fully digital, compact, integrated power supply - Integrated position, speed, and current control Bljdpfx Aijwiatisyeh - Brushless digital servo motors - High-resolution measuring system via integrated SinCos encoder - Motor nominal power: 2 kW CAD/CAM Software Complete program for creating or importing drawings, setting process-specific waterjet parameters, and controlling the machine. - Direct machine control - 32-bit Windows software - Automatic approach strategies - Automatic correction sequence - Cutting direction freely selectable for every contour - Jet correction - Material database - Visual cut inspection - HPGL and DXF import - Automatic pump pressure setting

Tahun pembuatan: 2020, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tinggi konstruksi: 2.200 mm, jumlah spindel: 3, persyaratan ruang panjang: 5.000 mm, lebar yang dibutuhkan: 5.500 mm, nomor mesin/kendaraan: 50844458, tingkat otomatisasi: otomatis, kapasitas produksi: 3.000 unit/jam, We are offering this used PIA Automation production line for surgical disposable masks, year of manufacture 2020. The line operated for only 2.5 years in single-shift mode and its condition can be described as “very good”. The production system is additionally equipped with a connected compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Main fuse: 25 A Short-circuit rating: < 10 kA Bodpfxsy Ddnms Aiyelh Concept: The line consists of a total of three units, interconnected by conveyor belts. In the first section, the individual consumables are fed via rollers, folded, the nose wire is integrated, welded, and then cut to the correct length. The finished, cut masks are transported via an indexing belt and conveyor systems to the next units, which are set up in parallel. In these, the ear loops are fed in and welded to the mask. If you have any questions or require further information, please feel free to send us a message or give us a call.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PA12704, 110610702, PA12707, mobilitas: bergerak, Fish sorting machine Badeer – complete documentation included in both Polish and English. The onboard computer operates on the MES – B’Logic software. It features two modules: B’Logic Grading and the B’Logic label design program. The set includes: - CAB label printer, - Feed hopper, - Acceleration conveyor, - Weighing machine, - Sorting conveyor, - PC computer The computer located by the machine next to the label printer is a touchscreen, while the main computer for setting the specifications of the currently processed product does not need to be placed directly at the machine. Specification: - 100 – 120 fish per minute, - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by the user (as shown in the video), - Airborne noise: < 70 dB Machine dimensions: Sorting section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m, Belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Belt width: 45.6 cm Motor: Drum motor Power consumption: 0.37 kW Bodpfxsy Hiyas Aiyolh Dynamic scale: Belt width: 250/350 mm Product weight: up to 1 kg (calibration possible) Motor power: 0.18 kW Speed: 0.25 m/s – 2.0 m/s

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: fungsi terbatas, fischerscope-de-en-1 Blsdpfx Ajyu Nabsiysh

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Rated voltage: 100V AC±10% Power consumption: 340VA Rotary Microtome The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise preparation of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. This unit combines motorized automatic functionality with manual fine control to ensure reproducible section quality even at high throughput rates. Technical features: - Motorized sectioning with adjustable speed and powered coarse feed, optimizing workflow for both routine and challenging specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments, allowing adaptation to a range of material requirements. - Specimen advance: 27 mm feed via stepper motor - Vertical stroke: 70 mm - Maximum cutting range without retraction: 65 mm (without specimen orientation) Blsdpsytrpvjfx Aiysh - Maximum cutting range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm, adjustable by speed and can be deactivated - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm, can be deactivated - Knife holder base can be shifted: N/S ±25 mm, E/W ±20 mm - Maximum specimen size (W x H x D): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming stages: 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return speed: approx. 120 – 420 mm/s Areas of application: Production of consistent tissue sections for microscopic analyses in histology, pathology, neuropathology, as well as materials science examinations; suitable for research and routine environments with high demands for sectioning precision and reproducibility. The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application range, making it a long-term investment for demanding laboratory processes. Includes: Power cable, knife holder base, NZ knife holder, standard chamber, disposable blade chamber, tungsten carbide knife 16 cm, manual.

Tahun pembuatan: 2012, Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, stand uji otomatis penuh untuk pengujian komponen sel bahan bakar Daya maksimum 500 W (arus maksimum: 100A, tegangan maksimum: 35V) Gas dapat dikondisikan suhu, dilembabkan, serta diberi tekanan; tersedia pembilasan nitrogen Anoda: 0,04-2 Nl/menit hidrogen, Katoda: 0,1-5 Nl/menit udara atau 0,02-1 Nl/menit oksigen Blsdpfjytr R Hjx Aiyoh Termasuk kabel daya, perangkat lunak asli pabrikan Testwork®, komputer pengukuran Unit kontrol pusat (PLC) rusak

Kondisi: baru, Cutting width 115 and 82 mm Cutting height 55 mm Motor power 2.0 kW Machine weight approx. 45 kg Mitre Saw KS for (glass) strip cutting with manual and electronic length stop suitable for wood, PVC, aluminium ----- Brief manufacturer description: - Crosscut and mitre circular saw for precise and user-friendly trimming in the molding/strip sector - Robust cast iron construction - A double ball-bearing shaft acts as the swing pivot below the material support table, optimizing material cutting. Cutting always occurs at the rear upper side. - Quick mitre adjustment up to 45° - Re-adjustable fixed stops at 90° and 45° - Upper blade guard can be connected to extraction system ----- Technical Data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade Ø: 250 mm Extraction connection Ø: 45 mm ----- Technical Description: Pos. 1.1 Crosscut and mitre saw type KS, Bljdjy T R Sqspfx Aiyeh 2 kW, 400 V, 30/40 mm blade mount Pos. 1.2 Pivot point LEFT Pos. 1.3 Pneumatic material clamping for KS, both sides of blade, 2 horizontal pneumatic cylinders, activated via roller valve during saw stroke, can be switched off Pos. 1.4 Carbide-tipped circular saw blade for wood, 250 x 2.8 x 40 mm 80 teeth, negative angle ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- Options at extra cost: Pos. 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery supply, reading via magnetic tape and sensor, resolution 0.1° Pos. 1.6: EUR 695.00 Machine stand for mitre saw KS ----- Pos. 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for strip cutting Travel distance 1.8 m, total length 2.0 m 10” touch display, connection 230 V Feed speed 40 m/min Direct measurement system – repeatability ± 0.1 mm Operating modes: (1) automatic absolute stop, (2) cut lists, (3) pusher cut lists, (4) incremental, (5) fine adjustment Program memory for up to 999 cut lists USB import and direct processing of cut lists at terminal Stop can be folded backwards With support foot Pos. 2.2: EUR 295.00 Support 2.0 m, right side, 110 mm wide, with support leg ----- Pos. 3.1: Manual length stop EUR 600.00 Length stop 2.0 m, left, with 110 mm wide support, with scale, stop carriage foldable and with support leg Pos. 3.2: EUR 295.00 Support 2.0 m, right side, 110 mm wide, with support leg ----- (technical data as per manufacturer – subject to change!) All prices quoted are net. Plus statutory VAT.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Bljdpfx Aijw A Nnpeysh

Tahun pembuatan: 2025, jam operasional: 2 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, panjang total: 900 mm, lebar total: 800 mm, tinggi total: 1.900 mm, jam kerja laser: 2 h, daya laser: 30 W, panjang gelombang laser: 1.064 nm, jenis pendinginan: udara, jenis laser: laser serat, produsen sumber laser: Raycus, The universally applicable laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser for permanent marking has now become essential. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be generated with just a few clicks and without extensive programming knowledge. Serial and part numbers can be automatically incremented by the software after initial setup. Furthermore, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables, and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with holder, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Bodpfjqfcviex Aiyslh Fiber laser 30 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German/English • Signal tower for indicating operating status • Optional: rotary axis (3-jaw chuck) • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arm for large components (one-sided or double-sided) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with Windows operating system • Frame made of aluminium profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.064 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.500 mm, tinggi total: 2.050 mm, panjang total: 900 mm, jangkauan kerja: 600 mm, berat keseluruhan: 120 kg, masa garansi: 12 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, panjang meja: 600 mm, lebar meja: 600 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, tinggi kerja: 950 mm, frekuensi input: 50 Hz, The versatile LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become essential in many industries. The powerful laser software allows you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. A handheld scanner can also be used. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options such as side arms for marking long parts, movable Z-axis, drawer systems, etc., are also feasible. Made in Germany Fiber Laser 30 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm • Signal light for operational status display • Optional: rotary axis (3-jaw chuck) • Optional: extraction system (incl. activated carbon filter) • Marking software EZCAD in German/English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard stand • Frame made from aluminum profiles • Air-cooled Bledpfxey T Ixnj Aiyoh • Door width approx. 700mm / Door pass-through height: approx. 400mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH)  with monitor bracket approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baru, Tahun pembuatan: 2026, We offer the Kehrfix push broom attachment in various models, with working widths ranging from 1.50 m to 4.00 m. Mounting brackets (e.g., pallet fork mount, bucket hooks, or Euro mount) can be discussed separately based on your requirements. This attachment broom is suitable for forklifts, wheel loaders, tractors, mini loaders, mini dumpers, and many other vehicles and machines! Bledjh T A Tnjpfx Aiyoh With a range of mounting options for fast installation on various vehicles, the KehrFix is the ideal solution for maintaining cleanliness over large areas. KehrFix push brooms are a professional choice for simple and efficient sweeping and cleaning. The robust KehrFix broom is engineered to perform these tasks quickly and thoroughly in virtually any application. KehrFix push brooms are high-quality, durable, maintenance-free, and universally compatible sweeping systems.