Beli Sunmaster Konv. Bubut. bekas (7.368)

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4,000 mm Center distance: 4,000 mm Faceplate diameter: 800 mm Control: Siemens 810D Speed: 1 – 1,600 rpm / 2-step Spindle torque: 6,000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse X-axis: 4 m/min Rapid traverse Z-axis: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 size 11) Operating hours/power on hours: to be read out Tailstock quill taper: ISO MK 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centers: 5,000 kg Max. workpiece weight – unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power consumption: approx. 52 kW Nodpfxeu Ix Izj Aa Uolb Machine weight approx.: 14.0 t Approx. machine dimensions LxWxH: 2.6 x 9.1 x 2.5 m Cycle turning lathe with Siemens cycle control Motor: 37 kW, nominal speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gearbox shift ranges Stage II: spindle torque 258.9 to 1,364.6 Nm Stage I: spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electrical cabinet Parat quick-change tool holder Coolant system Including various accessories (see photo), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Kondisi: bekas, en-GB Nlodpfou Ix Rpjx Aa Ueb

Kondisi: bekas, Tahun pembuatan: 2016, Technical Details: Swing over bed: 402 mm Swing over cross slide: 245 mm Turning length: 1000 mm Distance between centres: 1000 mm Centre height: 200 mm Faceplate swing diameter: 560 mm (with gap) Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Njdovav Sdepfx Aa Uslb Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper: ISO MK4 Tailstock quill stroke: 180 mm Total installed power: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.4 x 1.0 x 1.7 m The lathe is not equipped with rapid traverse. Axis positioning: 2 axes Read-out: Pinacho Lathe Controller Multifix tool holder with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Kondisi: bekas, Tahun pembuatan: 2006, en-GB: Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Centre distance: 850 mm Longitudinal travel (Z-axis): 900 mm Cross travel (X-axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x steps rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X-axis): 8 m/min Longitudinal travel (Z-axis): 10 m/min Operating hours (power on hours): approx. 34,600 h Tailstock taper ISO: MK 5 Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions (LxWxH) approx.: 2.2 x 3.2 x 1.9 m Multifix tool holder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Live centre in tailstock Operation via control panel and monitor Nlodpswtct Hefx Aa Uob Accessories: 4-jaw chuck Ø 250 mm with inner jaws Various chuck keys Machine lighting 8x base plates 4x wedge lifters Various pairs of jaws 1x closed steady rest Ø 100 mm

Kondisi: bekas, Tahun pembuatan: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height (measured in bed): 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 – 2240 rpm, 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev, 32 steps Cross feeds: 0.02 – 0.71 mm/rev, 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Machine dimensions (LxWxH): approx. 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation), available free of charge in Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with internal/external jaws, rated for 2000 rpm Thread cutting: metric, module, imperial threads Nedpfx Aov A Sqhja Uelb Chip guard Chuck guard (mechanical) MULTIFIX tool post with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection device Machine feet UVV safety preparation complete

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Turning length (face/longitudinal): face: 165 mm / cross: 160 mm Center height over bed: 200 mm Gap length: no gap mm Speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Feeds: longitudinal: 0.021...2.34 mm/rev / cross: 0.09...1.6 mm/rev Tailstock quill taper: MT 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Njdou Ixydepfx Aa Uslb Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200 mm with internal jaws - Multifix quick-change tool post - Foot brake - Coolant pump (delivery line not included)

Kondisi: bekas, Tahun pembuatan: 2014, Technical Details: Swing diameter over bed: 356 mm Swing diameter over cross slide: 220 mm Turning length: 1000 mm Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 38 mm Speed range: 45 - 1800 rpm Longitudinal feeds: 0.043 - 0.653 mm/rev, 42 steps Tailstock quill taper: MT3 Nsdpfx Aajw D Dcqo Ujlb Tailstock quill travel: 95 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Machine dimensions approx. LxWxH: 1.92 x 0.8 x 1.49 m (incl. display unit) Various accessories

Kondisi: bekas, tech-001 Nodpfx Ajydvfcsa Uslb

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Nledpfxevbhv Rj Aa Usb Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: bekas, Tahun pembuatan: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over support: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 rpm / 8 steps Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.3 x 0.9 x 1.3 m Nlsdpfsu Ix D Aox Aa Ueb Equipment: Röhm 3-jaw chuck, Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slots for copying attachment Live center

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Tailstock quill stroke: 180 mm Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Njdpfx Asu Ix Hdoa Uelb Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Swing diameter over support: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm Nlodpfx Aasu Ix Hqo Usb - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, Tahun pembuatan: 2004, en-GB Nedpfx Aaou Ix I Uj Ujlb

Kondisi: bekas, Tahun pembuatan: 2011, Technical Details: Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 500 mm X-axis travel: 190 mm Z-axis travel: z1: 335 / z3: 370 mm Y-axis travel: 80 mm Spindle speed: 6000 rpm Control: Heidenhain CNC Pilot 4290 Spindle bore: 73 mm Bar diameter: 50 mm Tool turret – number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min Operating hours (power-on): 36,443 h Operating hours (spindle): 8,545 h Interface: yes Total power requirement: 20 kVA kW Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m CNC Slant Bed Lathe With 3-jaw chuck Ø 160 mm incl. matching flange (max. speed 4,500 rpm) and additionally 2 sets of spare jaws. Nljdpfxew S Efze Aa Ueb 12-station turret, all stations driven; Sauter disc turret (C-axis = 300 rpm). Main spindle torque: 95 Nm at 100%, 127 Nm at 40%. Chip conveyor 450 K-1/250; year of manufacture: 2000 Electrical cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is for sale in non-functional condition. There is an unknown malfunction in the turret, so reference runs and axis movement are not possible. Therefore, machining operations cannot currently be performed. The machine is offered for sale as in need of repair! i.D. *

Kondisi: bekas, Tahun pembuatan: 1990, en-001 Nodpfx Aaju Iwyvo Ujlb

Kondisi: bekas, Tahun pembuatan: 1987, en-GB: Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Max. workpiece diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on): 23,495 h Tool turret: 12 stations Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shaft DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200 mm, hydraulic clamping Operation via double foot switch and control panel/operator desk Coolant system The TRAUB features an integrated chip conveyor with an ejection height of 1,100 mm (currently not functional). Accessories: various small parts 8 machine feet (various) without tailstock Nedpfx Aju Ix N Sja Uolb as is.

Kondisi: bekas, en-GB-001 Nljdpfx Aaou Ix Sgj Uob

Kondisi: bekas, Tahun pembuatan: 1998, 4a0b45bd Nsdpou Ngaujfx Aa Ujlb

Kondisi: bekas, Tahun pembuatan: 2008, en Nsdpjvvtpxjfx Aa Uelb

Kondisi: bekas, Tahun pembuatan: 1999, Detail teknis: Diameter putar di atas alas: 554 mm Diameter putar di atas cross slide: 370 mm Panjang putar: 1000 mm Jarak antara senter: 1100 mm Kontrol: Fanuc 210i Jarak memanjang (sumbu z): 1000 mm Gerak lintang (sumbu x): 290 mm Kecepatan spindel: 16 - 1800 rpm Gerak spindel: 178 mm Nsdpev Azdwjfx Aa Uolb Feed: 10 m/menit Lubang spindel: 104 mm Hidung spindel: D1 - 11 Kopling tailstock ISO: 6 MT Motor spindel: 11/7,5 kW Tegangan sambungan: 380 V Spesifikasi listrik – Tegangan/Frekuensi: 3 Ph / 400 V / 50 Hz Kebutuhan daya total: 11 kW Berat mesin kira-kira: 4,0 t Dimensi mesin (P x L x T): 3,3 x 1,8 x 1,7 m

Kondisi: bekas, Tahun pembuatan: 2010, Technical details: Spindle bore: 92 mm Turning length: 1000 mm Z-axis: min. 404 mm, max. 1130 mm Cross slide travel (X-axis): min./max.: 15 / 335 mm Control: Sinumerik SL840D Spindle torque: 2500 Nm Tool turret: 12 axial stations Operating pressure: 6.0 bar Rapid traverse: 20 m/min Total connected load: 88 kVA Machine dimensions (approx. LxWxH): approx. 4.45 m Bar feeder dimensions (approx. LxWxH): approx. L: 5.7 x W: 2.65 x H: 2.4 m Lathe with bar feeder - SL 840D control with NCU software 2.6, system software 1.4, Shop Turn software 6.4, with orientable C-axis, without driven tools - Power chuck KNCS 260-72, SMW Autoblok - Clamping force transmitter via clamping cylinder VNK-200/86 / SMW Autoblok - Heidenhain measuring system - Sauter tool turret, VDI50, electrically driven Bar loader Master 80HF, type 33LL: - Bar stock diameter min./max.: Ø 20mm / 80mm - Minimum workpiece length: 33-38-43 to 1000mm - Maximum workpiece length: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm - Feed speed (adjustable) 150mm/sec. – Return speed (adjustable) 950mm/sec. Nlodowf Nraspfx Aa Usb - Maximum remnant length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm - Minimum remnant: 120mm Chip conveyor/hinged belt, Richter, type SP 450/63 - Discharge height: 1000mm, discharge side right Equipment: - Various tool holders VDI 50 - Measuring adapter SK50--> VDI 50 - Hainbuch Toplus Kombi Axial-pull power chuck GR100 - Various sleeves, guide jaws for bar feeder Ø 20 – 75mm i.d.

Kondisi: bekas, Tahun pembuatan: 1999, 9b475c94 Nljdjy Emfqopfx Aa Uob

Kondisi: bekas, en-001 Nsdovadd Iopfx Aa Ujlb

Kondisi: bekas, Tahun pembuatan: 1963, Technical specifications: Nlsdpou Ix Arsfx Aa Ueb Swing diameter over bed: 1,000 mm Swing diameter over cross slide: 620 mm Turning length: 3,150 mm Centre distance: 3,150 mm Swing diameter in gap: 1,200 mm Gap length: 800 mm Machine weight approx.: 11.5 t Approximate machine dimensions (LxWxH): 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Kondisi: bekas, Tahun pembuatan: 1974, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross-slide: 300 mm Turning length: 2100 mm Distance between centers: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse X-axis: carriage 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Nledpfx Aaeu Ix Dcs Uob Thread cutting possible, e.g., metric, module, and inch threads Rapid traverse on cross-slide Chuck guard 2x chip trays Accessories: (see comparable on photo) 2x steady rests (1x closed, 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers Various gears