Beli Umpan Gripper bekas (2.277)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de-001 Nledpex Nbk Nefx Alkja

Kondisi: bekas, OMA \ 60 \ A Mesin bubut kayu otomatis dengan pemuat, panjang maksimum benda kerja 600 mm. Dimensi mesin: 240 x 140 x 175 cm. Berat perkiraan: 2200 kg. Nljdjyhghvjpfx Alkoa

Kondisi: bekas, Tahun pembuatan: 2007, FMB Turbo 3-36/3200/C Bar material diameter: 3 – 38 mm Nljdpfsh Nf N Sjx Alkoa Maximum bar length: 3,200 mm Year of manufacture: 2007 Weight without oil filling: approx. 750 kg

Kondisi: bekas, bekas, kondisi baik diremaj, dengan 4 rol pengumpan baru Merek: Holz-Her Tipe: ETZ No. mesin: 47884 Motor dapat diubah kutub, 2 kecepatan Diameter rol: 110 mm Lebar rol: 50 mm Rol pengumpan: 4 buah dengan statif Kecepatan: 2-30 m/menit, 4 pilihan kecepatan Kebutuhan ruang sekitar 1200x600x700 mm Nlodoyvvtfjpfx Alkea Berat sekitar 60 kg Daya total terpasang: 0,75 kW Lokasi penyimpanan: 97447 Gerolzhofen, siap muat, tanpa kemasan Penyerahan dalam kondisi apa adanya, seperti dilihat, diuji fungsional Tanpa garansi dan penjaminan

Kondisi: baik (bekas), Tahun pembuatan: 2007, Diameter batang (min.): 3 mm, Diameter batang (maks.): 32 mm, - Saluran pemandu (peredam oli) - Panjang batang maks. 3.200 mm - Saluran pemandu yang disertakan: D 33 mm - Panjang penggeser material L - Perangkat pemusat - Perangkat sinkronisasi Nlsdpfoyni N Nsx Alkoa - Terakhir dipasang pada mesin bubut otomatis panjang - Berat sekitar 900 kg - Dimensi PxLxT 4.000x700x1.200 mm

Kondisi: baik (bekas), Tahun pembuatan: 2011, - Saluran panduan (peredam oli) - Panjang batang maks. 3.200 mm - Saluran panduan yang disertakan: D 52 mm (atas permintaan, bagian saluran baru € 1.500,-, sekitar 4 minggu) - Panjang pendorong material LL - Perangkat pemusat Nlodpfsyniulsx Alkja - Perangkat sinkronisasi - Terakhir dipasang pada Gildemeister Twin 32 - Berat sekitar 900 kg - Dimensi PxLxT 4.000x700x1.200 mm

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Iemca Genius 112/32 terpasang pada Traub TNL12/7. Njdpfsyvf Rljx Alksla

Kondisi: bekas, bekas, kondisi baik, sedikit digunakan Merek: Holz-Her Tipe: ETZ117 Nedpfxsyu U Ece Alkela No. Mesin: 6999 Motor dengan pengubah kutub, 2 kecepatan Diameter rol: 110 mm Lebar rol: 50 mm Jumlah rol pengumpan: 3 buah dengan statif 8 kecepatan, 4 tingkat peralihan Berat ca. 60 kg Lokasi penyimpanan: 97447 Gerolzhofen, muat bebas, tanpa kemasan Penyerahan sesuai kondisi saat ini, seperti dilihat, telah diuji fungsionalitas, tanpa perbaikan menyeluruh, tanpa garansi dan jaminan

Kondisi: bekas, Tahun pembuatan: 2005, Capacity bottle filler: 10,000 PET bottles/h for 485 ml bottles Nedpovcqq Hjfx Alksla Equipment: Open feed hopper, closed container with bottle unscrambling carousel, format sets for 500 g and 285 g PET bottles.

Kondisi: baru, Diameter rol: 140 mm Lebar rol: 50 mm Diameter lubang: 35 mm Alur pasak: 10 mm Harga per buah: 37 EUR Nlsdpfx Aleyucufskoa

Kondisi: baru, Kami menawarkan rol penggerak dalam stok kami. Rolnya baru. Harga per unit - 20 EUR. Nljdpfx Aloyuctuskea

Kondisi: hampir baru (bekas), Mesin siap pakai, bunker dengan feeder rol inspeksi. Nledpfsytnf Tox Alkja

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, lebar gulungan: 200 mm, lebar produk (maks.): 200 mm, berat keseluruhan: 80 kg, masa garansi: 12 bulan, lebar kerja: 200 mm, tinggi produk (maks.): 3 mm, lebar rol: 64 mm, Silicon+ SFS 200 Servo Roll Feed Unit Compatible with all types of presses, primarily used on Bruderer, Schaal, and Mabu machines. Feed length – min. 0.10 mm to max. 9999.99 mm Feed width – max. 100 mm, 200 mm, or 300 mm, depending on the required model. Material thickness – 0.20 – 3.20 mm Feed angle – 180° Stamping line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatic system Control – NC touchscreen Brushless servo motor – 0.75 kW, 1.8 kW or 2.3 kW Approx. feed unit weight: 80–150 kg Nlsdpfxevptz Ie Alkoa Feed unit dimensions: 780 x 730 x 680 mm – The unit is driven by a brushless direct-drive servo motor, eliminating gear backlash and wear. This results in silent operation with no need for lubrication, and provides a safe, synchronized roller segment pair. – Rollers can be supplied with a polyurethane (PU) surface for feeding sensitive raw materials, upon request. – Synchronization between the feeder and the stamping press is easily achieved via a cam signal from the press’s PLC. – The feeder can be programmed for up to 10 groups of feeding steps and saved as recipes. Feed length can be infinitely adjustable during operation. EUR.1 Certificate for European origin and CE conformity. Specifications subject to change without notice. Upon request, we can customize feeders to your specific requirements.

Kondisi: baru, Tahun pembuatan: 2026, 1 Nsdpeyuwtiofx Alkola

Kondisi: bekas, Transistor pulse inverter for three-phase feed drives with analog control, servo amplifier SIEMENS type Simodrive 610 6SC6101-3A-Z Serial No.: A 822M103 Nedeh D Syvspfx Alksla Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters are designed to power three-phase servo motors of type 1FT5/1FS5. The dynamic properties of these motors are meant to be utilized to the fullest. Depending on the configuration of the power module, the pulse inverters can be used for a wide range of applications. This flexibility is further enhanced by extension modules for the power section. Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included) Output voltage: 3 DC 200 Volt Efficiency: approx. 95 % Number of feed axes: 4 Speed setpoint: ±10 Volt Auxiliary voltage: 24 Volt Relay contact for fault/ready-for-operation notifications Dimensions W x H x D: 339 x 440 x 300 mm Weight: approx. 25 kg The servo amplifier is still operational in a Gildemeister GDM42. Further components from the Gildemeister are available under stock numbers: 60343, 60347, 60348

Kondisi: bekas, EN0001 Nsdjfx Hyfepfx Alkola

Kondisi: bekas, Material clamp, material grab, load clamp, carrying clamp, lifting clamp, block tongs Manufacturer: NORDGREIF Type 7548 Year of manufacture: 1997 Load capacity: 500 kg Gripping range: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective covering on gripping surfaces - suitable for crane operation - with CE marking Dead weight: 50 kg Nlododz Spnepfx Alksa Good condition

Kondisi: bekas, Flatbed Die Cutter - Swing-Frame Die Cutter - Flatbed Press - Platen Press - Eccentric Press Die cutter + feeder for use with strip steel rule die cutting tools Flatbed Die Cutter HELMERDING Type PSH 25 Order No. EP 97784 Machine No. 6073 Year of manufacture 1998 Press force 25 tons Clearance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = mounting frame width 510 x depth 440 mm, plate thickness 20 mm Ram area 800 x 670 mm Drop-through hole in table 490 x 420 mm Ram stroke 45 mm Adjustable ram travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Power supply 400 Volt, 50 Hz - regulated drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - ram balance cylinder - automatic central lubrication VOGEL - solid base plate with 4 vibration-damping elements under the machine Space requirement (L x W x H) approx. 3000 x 2000 x 3000 mm Nledpjdzqmzjfx Alkoa Weight 4.5 tons Good condition Previously, the machine was used for punching cardboard blanks. Ideal for punching nonwoven materials or similar, e.g. for respirator masks.

Kondisi: bekas, C-frame Eccentric Press EBU Type 75 SKU Machine No. P 4598462 Year of manufacture: 1962 Pressing force: 75 tons Throat depth: 300 mm Table size: 800 x 620 mm Drop-through hole: 325 x 225 mm Nledpodzqltjfx Alkea Ram area: 470 x 180 mm Clamping shank bore: Ø 40 mm Table height above floor: 845 mm Stroke adjustment: 16 - 140 mm Slide adjustment: 80 mm Max. installation height: approx. 420 mm Stroke rate: 60 + 105 strokes/min. Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with rupture plate in ram - Tool monitoring UNIDOR, type APS MINI - Mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds via two V-belt stages on gear set - Two-hand control - Simple swing-away work area guarding - Table height adjustment in lowest position = threaded spindles for 50 mm below-floor adjustment - Control cabinet and operator panel for tool monitoring placed alongside - Automatic central lubrication - 4 machine feet Required installation space (L x W x H): 2600 x 2300 x 2450 mm Weight: approx. 5.5 tons Good condition

Kondisi: sangat baik (bekas), Dijual konveyor aluminium dengan ukuran 1000 cm x 50 cm, tersedia beberapa unit. Harga yang tertera berlaku untuk satu unit. Nodpfx Aloyr Sg Sokola

Kondisi: baru, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Height: 2680 mm Weight approx.: 14,400 kg Technical Data: Nedpfxsh Alh He Alksla - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), Load capacity: max. 360 kg Extendable: 700 mm x 1400 mm Nledpspu D Dzofx Alkea Swivel angle around longitudinal swivel bearing: 360°

Kondisi: sangat baik (bekas), Mechanical grab for concrete blocks - I have several units available, with gripping widths ranging from 120 cm to 250 cm. For sale: a mechanical grab designed for handling concrete blocks, edging stones, curbstones, and other precast elements. Robust steel construction with a chain-driven mechanism. Mounting for construction machinery (excavator, lorry-mounted crane, forklift). Nlodjwpl Rgepfx Alkea

Kondisi: baik (bekas), Tahun pembuatan: 2007, For sale: feeder for salt, feed, etc. Nljdsv A Rqmspfx Alksa

Kondisi: baru, Tahun pembuatan: 2025, de-feeder-description-1 Nlodpfxevz E Ukj Alkoa