Beli Wmw Ps 300 bekas (16.014)

Kondisi: bekas, Technical details: X-axis travel: 450 mm Y-axis travel: 150 mm Z-axis travel: 400 mm Distance column to table edge, min./max.: 100 / 250 mm Spindle speed range: 25, 44, 78, 130, 228, 400 / 6 steps rpm Feed rate X/Y: 10 - 100 / 8 steps mm/min Hjdsu Nc Nljpfx Al Isl Table size: 990 x 300 mm Clamping surface: 800 x 195 mm Table swiveling range +/-: 30° Total connected load: not specified kW Approx. weight: 1200 kg Dimensions (LxWxH): approx. 1.5 x 1.3 x 1.5 m Horizontal milling machine, currently fitted with a tool arbor Ø 32 mm and a gear milling cutter. Machine vice included.

Kondisi: bekas, Technical details: Hjdpfsv Sz Dijx Al Iol X-axis travel: 1000 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Distance from column to table edge: min. 150 / max. 550 mm Spindle speed range: 28 - 1400 rpm / 18 steps Tool holder: SK40 Spindle head swivel: left/right 90°, forward/backward 45° Feed rate (X/Y axis): 16 - 800 mm/min / 18 steps Table size: 1600 x 400 mm Clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Approx. weight: 4000 kg Machine dimensions (LxWxH): approx. 2.0 x 2.4 x 1.85 m Horizontal milling machine, retrofitted with vertical milling head *

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Hjdpfxevbhv Rs Al Iol Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: bekas, Technical Details: Number of spindles: 4 Drilling capacity in steel (diameter): 30 mm Drilling stroke: 200 mm Drill spindle Morse taper: MT3 Spindle outreach: 350 mm Spindle distance, center to center: 490 mm Spindle head adjustment: 500 mm Feed rate: 0.07; 0.15; 0.25; 0.33 / 4-step mm/rev Feed: manual and automatic Hjdou Idt Nepfx Al Iel Spindle speed: 70 ... 1,600 / 8-step rpm Distance spindle/table: max. 430 mm Distance spindle/table: min. 180 mm Table surface: 1820 x 400 mm Table adjustment: 250 mm with handwheel Total power requirement: 10.8 kW Machine dimensions (approx. LxWxH): approx. 1.0 x 2.1 x 2.8 m All spindle heads with clockwise and counterclockwise rotation Drilling heads 1 to 3: clockwise and counterclockwise rotation without threading function Drilling head 4: with automatic threading function, Röhm chuck up to Ø 33 mm All drilling heads and the table are height-adjustable. Equipment: Coolant supply internal diameter (i.d.)

Kondisi: bekas, en Hedpju Ng Npsfx Al Isl

Kondisi: bekas, Technical Details: Shearing capacity: 1 mm Max. round blank diameter: 1000 mm Shearing capacity: 1 mm Max. round blank diameter: 1000 mm Approx. machine weight: 0.2 t Approx. machine dimensions (LxWxH): 2.0 x 0.5 x 1.4 m Hedpfxeu Icqys Al Isl Application: manual cutting of round steel sheet parts Upper blade: Ø 69 mm x 11 mm; vertical adjustment 25 mm via hand lever Lower blade: Ø 74 x 15 mm; adjustment: NO = fixed Centering fixture with die The material is manually positioned using a hand grip: vertical stroke 15 mm, horizontal travel 500 mm, manual operation.

Kondisi: bekas, en-GB Hjdpfx Asu Idugsl Iel

Kondisi: bekas, fi Hjdpfx Aou Nc R Njl Ijl

Kondisi: bekas, Tahun pembuatan: 1981, en-001 Hedpfxsu Nc Hkj Al Iel

Kondisi: bekas, Technical details: z-axis travel: 400 mm Spindle speed range: up to 3,000 rpm, stepless Feed, stepless: not specified Quill stroke, vertical: 100 mm Spindle taper: MT2 Table surface: 445 x 315 mm Hjdpfx Alev A S Efo Iel Distance table to spindle underside: max. 520 mm Table travel (longitudinal): 250 mm Table travel (cross): 330 mm Table height above floor: 920 mm Total power requirement: 1.6 kW Machine weight approx.: 1,500 kg Machine dimensions LxWxH: 1.3 x 1.1 x 2.0 m Application: Milling and drilling of elongated holes Fine depth indicator gauge mounted on the drilling spindle head. 5x T-slots according to DIN 650: a=10; h=18; b=18; c=8 mm Equipment: Two-axis digital display ACU-RIDE

Kondisi: bekas, Technical details: Pressing force: 40 t Throat depth: 365 mm Hjdsu Nfuqspfx Al Ijl Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Through-hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Additional technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Kondisi: bekas, Tahun pembuatan: 2004, technische_details_schweisstisch Hedpfx Alsu Nkxuo Iel

Kondisi: bekas, Accessories for, e.g., a BFT 130 table-type boring mill Spindle head and swivel bracket can be rotated 360° around their own axes Two swivel planes Set angles are readable on circumferential scales Hedpfeu Nlgyjx Al Ijl Maximum speed: 600 rpm Spindle taper: ISO 50 Weight approx. 270 kg Includes coupling piece for SK 50 quill/head drive

Kondisi: bekas, en-001 Hedpfx Ajvadd Ijl Iol

Kondisi: bekas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height (table/ram at top position): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 75 mm Passage in table: Ø 180 mm Clamping surface of ram: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Approx. machine weight: 2.2 t Approx. dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Hodpfsvc Awxox Al Iol Continuous and single stroke operation

Kondisi: bekas, Tahun pembuatan: 1960, Technical details: Pressure: 10 t Throat depth: 255 mm Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height (table/ram, top): 630 mm Installation height (table/ram, bottom): 230 mm Table clamping surface: 420 x 400 mm Through-hole in table: 220 mm Hsdsu Nfudepfx Al Ijl Ram clamping surface: 200 x 200 x 65 mm Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions (LxWxH) approx.: 1.1 x 0.5 x 2.1 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1973, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Mesin bevel yang ditampilkan pada gambar tersedia untuk dijual, dalam kondisi berfungsi, lengkap dengan semua perkakasnya. Hjdpjxur Adofx Al Ijl

Kondisi: sangat baik (bekas), • Produsen: ABUS KG – Jerman • Tipe: K-300 1-4 • Daya motor: 3,8 kW • Catu daya: 400 V / 50 Hz • Dilengkapi dengan rem elektromagnetik – torsi pengereman 90 Nm • Poros bergigi – diameter sekitar 34 mm • Pemasangan: flange persegi • Konstruksi industri yang kokoh, didedikasikan untuk digunakan pada crane dan hoist ABUS • Kondisi: bekas, berfungsi (foto asli) Hsdpexbfutofx Al Isl

Kondisi: siap digunakan (bekas), Strung de fațetare DP 2000 Hodpfxsv Hx R No Al Iol Diametru mandrineă: 2000 mm Lungime: 3500 mm Greutate aprox.: 22 t

Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Hjdsygh Unopfx Al Ijl

Kondisi: bekas, Tahun pembuatan: 2026, WMW - ZFTK 500 CNC Hodpfxeyl I Hhs Al Iel - sistem NCT (kompatibel dengan FANUC) - retrofit sekitar tahun 2020 - tidak semua gerakan dikontrol CNC - dalam keadaan menyala - sedang digunakan

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, 400 mm swing diameter O F F E R We can offer you, subject to prior sale and errors excepted, available ex stock, on a non-binding basis: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Plunge Grinding Attachment Model: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Max. grinding depth: 315 mm Max. external grinding diameter: 400 mm Max. workpiece weight: 630 kg Workpiece swing diameter with/without chuck guard: 500 / 600 mm Centre height above table: 360 mm Hedoxyllvopfx Al Iel 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swivelling, max.: 30° Workpiece headstock transverse adjustment, max.: 400 mm Grinding spindle stock Z-feed: 70 mm Grinding spindle stock transverse adjustment, approx.: 100 mm Grinding head infeed, interval cycle: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Max. table travel: 630 mm Steplessly adjustable table speed: 0.1 – 8 m/min (10 m/min) Max. distance between workpiece headstock and grinding spindle: 1,250 mm Grinding spindle stock movement on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special Equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or multiple diameters, external grinding, and face grinding of narrow faces • Plunge grinding attachment, hydraulically swivelling, with automatic cycles for grinding one or multiple faces as well as stepped faces simultaneously • Electronic program control with large operator panel and ammeter for both grinding spindles • Belt-driven grinding spindle with built-in spindle and 5 separate interchangeable grinding spindles with various pulleys of differing diameters • Dressing units for both grinding spindles; large chuck guard on the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Comprehensive accessories including 4-jaw chuck approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, pulleys, spindle sleeves, grinding wheel holders, foot switch • Separate hydraulic unit, attached electrical cabinet, coolant system with magnetic separator Condition: Good to very good condition! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, jam operasional: 426 h, kapasitas angkut: 1.600 kg, tinggi angkat: 5.300 mm, pengangkatan bebas: 1.900 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.750 mm, panjang garpu: 1.150 mm, jenis penggerak: Elektro, Stacker Titik berat beban: 0 Jenis tiang: Triplex Kondisi teknis: sangat baik Jenis ban depan: poliuretan Jenis ban belakang: poliuretan Baterai volt: 24V Hedsymt Aqopfx Al Ijl Baterai Ah: 300Ah Tahun pembuatan baterai: 2023 Deskripsi: Telah diuji bengkel, UVV & inspeksi baru, pengecatan baru

Kondisi: baik (bekas), Tahun pembuatan: 2024, Welding positioner KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via geared motor from 0 to 90° Speed: 0.3 – 2.5 rpm Hodpfx Alsbvk I Ee Iol Incl. foot remote control Additional cost: Quick-change chuck Diameter 300 mm, €450

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, kendali jauh kaki, Protec KT 300 H Welding Turntable, 170/400 Special Version Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Hsdpfx Alsvbrqxo Ijl Table height: 500 mm Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional)