Beli Bray Fc 4015 bekas (636)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following assemblies: - Housing + QLT - Housing + Heater Service Unit P450 - Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: - Welding unit - Sledge unit - Cleaning unit for welding electrode - Base - Linear unit - Analysis unit DMC Dimensions (L x W) mm: 1700 x 1200 Cycle time sec: ≤ 30 - 35 Technical availability %: ≥ 95 Operators required: 1 Voltage V: 400 AC Frequency Hz: 50 Control voltage V: 24 DC Main fuse A: 50 Rated current A: approx. 17 Compressed air supply bar: 6 Year of manufacture: 2020 System components: - Control cabinet - Safety enclosure - Linear unit - Tooth belt axis Festo DGE-25-700-ZR-LKRV - Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN - Gear ratio i=5 - Feed constant = 63 mm/rev - Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit - Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit - Horizontal spindle axis - Compact Module CKK 110-250 without brake - Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Podpfxozd Rmgs Aqvegt - i=1, p=5mm - Integrated reference switch: Hall PNP normally open - Vertical spindle axis - Compact Module CKK 110-100 with brake - Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN - i=1, p=5mm - Integrated reference switch: Hall PNP normally open - Welding tong - Crede PSZ-K - Control: ST-T13V2.0 - Power module: LT-L05-T13V13.0 (5,000A) - Water cooler: DLK 1002-C - Interface: ProfiNet - Proportional valve block PVB V1.0 - Adapter box AB V3.0 for SZ and PSZ - Extraction unit - TBH GmbH GL 265 Z - Flow monitor - Turck GmbH & Co. KG - FCS-M18-AP8X - Type: BDE11154003 Condition: unused, the machine has never been in productive operation. Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications may change!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Double clipper Brand: Poly-Clip System GmbH & Co. KG Model: FCA 50 Serial number: 115 Year of manufacture: 2010 Power: 4.0 kW Voltage: 400 V, 3 Ph, 50/60 Hz, 6.0 A Podpfx Aov Ur Nboqvegt Pressure: 5–7 bar Dimensions: 1700 mm x 1000 mm x 1850 mm

Kondisi: bekas, Wire electrode, welding wire, welding wire, flux-cored wire - Manufacturer: Böhler, partially used spool of shielded gas wire electrode - Type: AVESTA flux-cored wire FCW-2D 316L/SKR Ø 1.2 mm Pjdefw Rvwepfx Aqvogt - Dimensions: Ø 300 /100 mm - Spool weight: 11.9 kg

Kondisi: baru, Apakah Anda tertarik dengan produk ini atau ingin mendapatkan informasi lebih lanjut? Jangan ragu untuk menghubungi kami. Pgjdpjztcdiefx Aqvet Foto tambahan dapat disediakan jika diminta. Harga dapat dinegosiasikan. Untuk suku cadang dan material lainnya, Anda juga dapat mengunjungi situs web kami, CNC-Service. Apakah Anda memiliki pertanyaan atau sedang mencari sesuatu yang spesifik? Jangan ragu untuk menghubungi kami!

Kondisi: bekas, berat muatan maksimum: 29.990 kg, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2024, volume ruang muat: 52 m³, lebar total: 2.550 mm, Tahun pembuatan: 2024, Perlengkapan: ABS,

Kondisi: baru, Pressure: 40 Bending length: 1530 mm Distance between uprights: 1530 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 2660 x 1960 x 2500 mm Weight approx.: 4600 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model REVOLUTION DDM-4015 Servo-driven Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent tomorrow’s technology. The increased speed and accuracy of this new generation of machines provide you with greater efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a technology pioneer – bringing extensive experience and quality. Standard equipment: KK-Industries is the general representative for the DENER Group. We have assembled a premium model for the European market. The CNC Servo Electric Press Brake by KK-Industries made by DENER: Technological advantages – Model REVOLUTION DDM: The CNC Servo Electric Press Brake stands out due to its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Entire width between the frames is usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment: 3D color graphic controller Delem 66T, 17'' touch screen Y1, Y2, X and R axes CNC-controlled X-axis: 500 mm, R-axis stroke: 150 mm for 1.5 m and 2 m models X-axis: 750 mm, R-axis stroke: 250 mm for all other models We make no compromises with the top tool and die, equipping the KKI REVOLUTION CNC Servo Electric Press Brake with quality tools from EUROSTAMP Italy. Segmented gooseneck top tool 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) Backgauge with servo motors guided by linear rails and ball screw Of course, a machine is only as good as its service. That's why we focus on highly qualified staff with many years of experience in CNC sheet metal processing. Laser safety device on the upper beam CE safety equipment Operating instructions in GERMAN and ENGLISH Options: Additionally controlled backgauge axes X1, X2, R, Z1, Z2, Delta X ATF type 6-axis backgauge, X1, X2 - R-type backgauge Pgedpfxod Etfzo Aqvst X-Prime type backgauge Hydraulic upper and lower tool clamping for tools CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning          ¤ 2,330-- - CNC crowning              ¤ 4,658-- KK-Industries GmbH Something for everyone!

Kondisi: baru, Press force: 175 Bending length: 3570 mm Frame gap: 3570 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5340 x 2100 x 2680 mm Weight approx.: 11,500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model REVOLUTION DDM-17535 Servo-motorized press brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, thanks to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new generation of machines give you better efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes in various models and tonnages, Dener is a pioneer of this technology, with extensive experience and high quality. Standard equipment: KK-Industries is the general representative of the DENER group. We have assembled a high-quality model for Europe. The CNC Servo Electric Press Brake by KK-Industries, made by DENER: Technological advantages – Model REVOLUTION DDM: The CNC Servo Electric Press Brake distinguishes itself by its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter operation - Full-length utilization between the frames - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Psdped Etf Djfx Aqvogt Standard equipment: 3D color graphic control Delem 66T 17” touchscreen Y1, Y2, X, and R axes CNC controlled CNC crowning via 3D control X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m versions X-axis 750 mm, R-axis stroke 250 mm on all other press brakes We make no compromises with the upper tool and die either, equipping the CNC Servo Electric Press Brake KKI REVOLUTION with EUROSTAMP Italy quality tooling: - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35 and 50 mm) - Back gauge, servo-motor driven on linear guideways and ball screw Of course, every machine is only as good as the service provided. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. - Laser safety device on upper beam - CE safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional controlled back gauge axes X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis back gauge, X1, X2- R Type back gauge, - X-Prime Type back gauge - Hydraulic upper and lower tool clamping system - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Kondisi: baru, Tahun pembuatan: 2024, Kontainer cairan. • Dilengkapi dengan terpal penutup • Dimensi dalam 7000x2350x2500 mm • Kapasitas air 41 m³ • Sepenuhnya galvanis Pjdpfx Aov Apg Hjqvogt • Cocok untuk sistem hookarm dan kabel • 1 tangga di bagian luar • 1 tangga di bagian dalam • Roda lebar di sudut • Sudut lurus • Dilengkapi dengan 4 buah sambungan flens 6 inci, 2 di antaranya di dasar yang diturunkan Kondisi: Baru Tahun pembuatan: 2024

Kondisi: bekas, jarak tempuh: 1.100 km, daya: 110 kW (149,56 hp), pendaftaran pertama: 06/2026, jenis bahan bakar: diesel, berat keseluruhan: 2.800 kg, konfigurasi gandar: 2 gandar, bahan bakar: diesel, tipe perpindahan gigi: mekanis, suspensi: baja, jumlah tempat duduk: 3, lebar total: 2.147 mm, tinggi total: 1.984 mm, Perlengkapan: filter jelaga, kantung udara, kontrol traksi, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem immobilizer,

Kondisi: baru, Tahun pembuatan: 2026, panjang total: 1.450 mm, lebar total: 800 mm, tinggi total: 1.800 mm, berat keseluruhan: 500 kg, daya: 4,75 kW (6,46 hp), FC 120 ZK Working capacity Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush band dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Pjdpjt D D Nzjfx Aqvegt Brush band speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Power consumption: 12A, Extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: LC385, Used complete line for PET and glass bottles, 2007 Washing Machine: Manufacturer: Dipran Model: Marea 12P Year of manufacture: 2007 The used complete bottling line for PET and glass bottles includes a high-quality bottle washing machine. Manufactured by Dipran in 2007, the machine is a Marea 12P model. This machine ensures thorough and efficient cleaning of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year of manufacture: 2010 The line also features a reliable filling monoblock produced by NELDEN. The model is Giove FC VA 20-1 Big, built in 2010. Utilizing gravity filling technology, this monoblock accurately fills bottles with the desired product, ensuring precision and consistency. Labeling Machine: Pgedpjvgufvjfx Aqvot Manufacturer: Newtec Model: Fix S2 E2 Year of manufacture: 2007 A labeling machine from Newtec, model Fix S2 E2, manufactured in 2007, is included in the line. With its mechanical cam system, this machine efficiently applies labels to bottles, ensuring clear and professional product branding. Case Erector: Manufacturer: SistAI Model: HM 2000 Year of manufacture: 1995 To complete the packaging process, a case erector from SistAI is part of the line. The HM 2000 model, built in 1995, is a dependable machine that quickly forms cartons for efficient packaging and transportation of bottles. Additional Information: - The line achieves a production speed of 1,800 to 2,000 units per hour with 5-liter containers. - The washing machine uses microfiltered water for treatment. - The capping unit of the filling monoblock features interchangeable heads and channels to accommodate production requirements. - Closure types include aluminum screw caps 35 x 18 and plastic screw caps 48 x 17. Used complete line for PET and glass bottles, 2007 – this fully equipped line is in excellent condition and ready for immediate sale.

Kondisi: bekas, Fiber laser, fiber laser cutting system with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Model: HD-F III 3015 III BH-IPG 2kW Serial no.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Pgsdpfokdnv Tsx Aqvot Output power: 0.2–2 kW Wavelength: 1070–1080 nm IPG power requirement: 6.4 kW/hour - Random polarization - Collimation focal length FC 100 mm - Focusing focal lengths FF 150 mm - Fiber diameter in single mode: 50, 100, 200, 300 µm - Max. power consumption: 42 kW - Machine power consumption: 20 kW - Filter power consumption: 4 kW - Chiller power consumption: 10+1 kW - Resonator power consumption: 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis: 3060 mm Working area Y-axis: 1530 mm Working area Z-axis: 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator mounted adjacent - Water cooling unit for laser source and cutting head adjacent - Under-table extraction and extraction filter unit adjacent - With double exchange table - Tube laser with 4-jaw chuck and large spindle bore next to flatbed - Steadies for tube laser on linear guides - With CAD software - With nesting software - With tube laser software Very good condition

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2026, panjang ruang muatan: 8.880 mm, lebar ruang muat: 2.475 mm, tinggi ruang muatan: 2.165 mm, volume ruang muat: 47 m³, panjang total: 10.259 mm, lebar total: 2.550 mm, tinggi total: 2.165 mm, Tahun pembuatan: 2026,

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), de-to-hu-it-lt Pjdpfex R Duaex Aqvegt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, berat kertas (maks.): 208 g/m², lebar kertas (maks.): 350 mm, tinggi kertas (maks.): 500 mm, kapasitas produksi: 4.500 unit/jam, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Lelang lini produksi pembuatan brosur! RINCIAN TEKNIS Menara Pengumpulan Model: Horizon VAC-100a / VAC-100m Jumlah menara: 2 Stasiun per menara: 10 Sistem pengumpanan: Pengumpan vakum Tegangan: 230 V Frekuensi: 50 Hz Arus: 10,4 A per bagian Modul Penjahitan dan Pelipatan Model: Horizon SPF-200A Tegangan: 230 V Frekuensi: 50/60 Hz Arus: 3,4 / 3,2 A Kepala penjahitan: 2 Ketebalan brosur: hingga 4,5 mm Fungsi: Penjahitan kawat dan pelipatan tengah Pgsdpfozy Hhxsx Aqvst Pemotong Depan Model: Horizon FC-200A Fungsi: Pemotongan depan otomatis Mode operasi: Operasi inline dengan Horizon SPF-200A Kualitas pemotongan: Pemotongan yang sangat presisi Mesin Penumpuk Model: Horizon ST-40 Tegangan: 230 V Frekuensi: 50 Hz Arus: 4,7 A Fungsi: Penumpukan otomatis brosur yang telah selesai Kapasitas produksi: maks. 4.500 brosur/jam Stasiun pengumpanan: 10, dapat diperluas hingga maks. 60 Ukuran lembaran maks.: sekitar 350 × 500 mm Berat kertas: 52–208 g/m² Ketebalan jilid: maks. 2 mm untuk jilid sadel Proses: Pengumpulan, penjahitan, pelipatan, dan penumpukan dalam satu mesin RINCIAN MESIN Penghitung produksi: sekitar 1.800.000 brosur PERLENGKAPAN Menara Pengumpulan Horizon VAC-100a Menara Pengumpulan Horizon VAC-100m Modul Penjahitan dan Pelipatan Horizon SPF-200A Pemotong Depan Horizon FC-200A Mesin Penumpuk Horizon ST-40 Di lampiran, Anda akan menemukan lembar data untuk setiap komponen mesin dengan data teknis yang lebih rinci.

Kondisi: bekas, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/2023, inspeksi berikutnya (TÜV): 09/2026, panjang ruang muatan: 10.149 mm, lebar ruang muat: 2.325 mm, tinggi ruang muatan: 2.285 mm, volume ruang muat: 55 m³, Tahun pembuatan: 2023, Perlengkapan: ABS,

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 174 kW (236,57 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 1.660 kg, tegangan masuk: 400 V, lebar total: 1.100 mm, panjang total: 4.700 mm, tinggi total: 2.240 mm, masa garansi: 6 bulan, CHILLER BERPendingIN UDARA KTK JWA FC 172 S/K/P PS 174 KW Kapasitas pendinginan: 174,0 kW / 49,47 ton (15/10 — 35°C) Tahun pembuatan: 2019 Pilihan: Modul hidrolik. Pendinginan bebas (Freecooling). Sirkuit refrigeran: 2 unit. Penukar panas: Pelat Kondensor: Tembaga / Aluminium Kompresor: 4 unit. Danfoss DSH184A4ALB (scroll) Jenis refrigeran: R410A Jumlah kipas: 4 unit. (Inverter frekuensi) Modul hidrolik: 1 unit. Pompa air Lowara PLM90B14S2/330 E3 Dimensi: 4,7x1,1x2,24 m Berat: 1660 kg Jam kerja: 4174/4174/4174/4174 jam. Kondisi: Bekas, telah diuji, berfungsi penuh KONDISI, PENGUJIAN, & KESIAPAN Chiller / kaltwassersatz / menjalani tujuh tahap inspeksi teknis dan verifikasi parameter operasional. Chiller ini juga diuji di stasiun pengujian kami, dengan koneksi ke air (atau glikol) dan penyesuaian parameter sesuai dengan kebutuhan Anda. Pgodpozvbi Aefx Aqvst Setelah pengujian, Anda akan menerima laporan terperinci tentang kinerja operasional dan kondisi keseluruhan chiller. Chiller / kaltwassersatz / siap untuk diangkut dan dipasang. Insinyur kami akan membantu Anda dengan perhitungan kapasitas pendinginan, pemilihan skema pendinginan yang sesuai, dan konfigurasi opsi peralatan yang diperlukan. GARANSI & DUKUNGAN Kualitas peralatan dikonfirmasi dengan garansi mulai dari 6 hingga 36 bulan. Perusahaan kami juga dapat menawarkan: - Pengisian refrigeran; - Penggantian oli dan filter; - Dukungan teknis. LOGISTIK - Pengiriman ke seluruh dunia tersedia - Dukungan untuk pemuatan, dokumentasi ekspor, dan koordinasi logistik Dapatkan konsultasi terperinci. Foto, video, dan laporan pengujian lengkap dapat diberikan segera setelah permintaan.

Kondisi: baru, konfigurasi gandar: 3 gandar, volume ruang muat: 55 m³, Perlengkapan: ABS,

Kondisi: sangat baik (bekas), Ifsys Type: 114100 Type: VL 13 Servo Press Pgjdpozd Rk Ejfx Aqvot Bunker system with 2x Vibroliner and 2x Vibro Bunker 1x Return Conveyor 2x Control Unit FC 1000 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Kondisi: bekas, diameter putar di atas sled silang: 185 mm, panjang pembubutan: 250 mm, diameter pembubutan: 280 mm, lubang spindel: 50 mm, kecepatan spindel (min.): 6.000 rpm, jarak pergerakan sumbu X: 180 mm, jarak gerak sumbu Z: 285 mm, tinggi total: 1.730 mm, panjang total: 2.180 mm, lebar total: 1.610 mm, berat keseluruhan: 3.000 kg, Aplikasi Umum: Gildemeister CT 20 terutama digunakan dalam pemesinan presisi, khususnya dalam pembuatan komponen kompleks di industri seperti industri otomotif, dirgantara, dan rekayasa mesin umum. Berkat kemampuannya, mesin ini cocok untuk tugas-tugas yang membutuhkan akurasi dan efisiensi tinggi dalam pemesinan bubut. Keunggulan: Pgsdpfx Aezi Uqgoqvet - Desain yang ringkas memungkinkan pemanfaatan ruang yang efisien di lingkungan produksi. - Kecepatan putar yang tinggi, yaitu 6000 RPM, memungkinkan pemesinan yang cepat dan mengurangi waktu siklus. - Turret serbaguna dengan 12 alat dan 8 alat putar meningkatkan produktivitas, karena beberapa operasi pemesinan dapat dilakukan tanpa penggantian alat. - Daya motor spindel yang kuat sebesar 7,5 kW memastikan kinerja yang konsisten bahkan di bawah beban kerja yang tinggi. - Jalur perjalanan yang presisi pada sumbu X dan Z memudahkan pemesinan yang rumit dan berkontribusi pada produksi berkualitas tinggi. Baterai cadangan habis, data mesin harus diperiksa!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Referensi: 11137 . 2016 Horizon SPF-200L Model terbaru, kecepatan tinggi, mesin pembuat brosur otomatis sepenuhnya dengan kemampuan format lanskap A4. Dilengkapi dengan pemotong tambahan untuk pemotongan 3 sisi! Fitur: Otomatisasi Tingkat Lanjut – Semua pengaturan yang diperlukan untuk berbagai macam format brosur dapat dilakukan secara otomatis. Bahkan pengaturan celah rol pelipat juga otomatis, sehingga perubahan dapat dilakukan dengan sangat cepat dengan jumlah lembar uji yang minimal. Layar sentuh berwarna besar 10,4 inci dengan tampilan berbasis ikon untuk pengoperasian yang mudah. Penghematan Biaya – bekerja dengan lembaran 4 halaman yang sudah dipotong, bukan lembaran yang dilipat, untuk menghilangkan proses pelipatan. Dilengkapi dengan: 3 x menara Horizon VAC-600Ha+m+c (18 kotak) Konveyor PJ-77R untuk penataan lembaran di bagian belakang menara C Unit penghubung IFU-200 Mesin jahit dan pelipat SPF 200L 2 x kepala jahit Hohner 43/6-S Pemotong tepi depan FC 200L Pemotong atas dan bawah TBC-200L Konveyor pembuangan kertas bekas Pengedor PK-30 Konveyor LC-200 Spesifikasi: Ukuran Lembaran: Maks. 356 x 610 mm atau 14.000” x 24.000” Min. 120 x 180 mm atau 4.725” x 7.090” Rentang Berat Lembaran: Kertas Biasa: 64 hingga 157 gsm Pedpfx Aozuth Isqvegt Kertas Berlapis: 84,9 hingga 157 gsm Ketebalan Jahitan: Jahitan Atas/Sisi, Jahitan Sudut, dan Lipatan Maks. 4 mm atau 0,155” (sekitar 48 lembar kertas biasa 64 gsm) Kecepatan Produksi: Maks. 4.000 brosur per jam (format A4, potret) Maks. 3.500 brosur per jam (format A4, lanskap)

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 486 kW (660,78 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 8.234 kg, tegangan masuk: 400 V, lebar total: 2.500 mm, panjang total: 12.000 mm, tinggi total: 2.300 mm, masa garansi: 6 bulan, Luftgekühlter Kaltwassersatz SWEGON COBALT PRO SLN 58.2 FC 486 kW Kälteleistung: 486 kW / 138,19 Tonnen (12/7 — 35°C) Baujahr: 2015 Ausstattung: Freikühlung (370 kW) Kältemittelkreislauf: 2 Stück Wärmetauscher: Rohrbündel (Shell and Tube) Verflüssiger: Microchannel, Aluminium + Kupfer / Aluminium (Freikühlung) Verdichter: 1 x Bitzer CSH9563-160Y-40D (Schraubenverdichter) + 1 x Bitzer CSH8593-140Y-40D (Schraubenverdichter) Kältemitteltyp: R1234ze Anzahl der Ventilatoren: 20 Stück (EC-Ventilatoren) Abmessungen: 12 x 2,5 x 2,3 m Gewicht: 8.234 kg Betriebsstunden: 13.200 / 18.920 h Zustand: Gebraucht, geprüft, voll funktionsfähig ZUSTAND, PRÜFUNG & BEREITSCHAFT Der Kaltwassersatz / Chiller durchläuft sieben Prüfphasen zur technischen Überprüfung und Kontrolle der Betriebsparameter. Anschließend erfolgt die Testung auf unserem eigenen Prüfstand mit Wasser-/Glykolanschluss sowie die Parametrierung nach Ihren Anforderungen. Nach der Testung erhalten Sie einen detaillierten Prüfbericht mit den Betriebsleistungen und dem Gesamtzustand des Kaltwassersatzes. Das Gerät ist transportfertig und sofort einsatzbereit. Unsere Fachingenieure unterstützen Sie gern bei der Auslegung der Kälteleistung, der Auswahl des passenden Kühlkonzepts sowie der Konfiguration Ihrer gewünschten Optionen. Pedszxc Huspfx Aqvjgt GARANTIE & SERVICE Die Qualität der Anlage ist durch eine Garantie von 6 bis 36 Monaten bestätigt. Unser Service umfasst außerdem: - Befüllung mit Kältemittel - Austausch von Öl und Filtern - Technischer Support LOGISTIK - Weltweite Lieferung möglich - Unterstützung bei Verladung, Exportdokumenten und Logistikkoordination Individuelle Beratung gewünscht? Detaillierte Fotos, Videos und ein vollständiger Prüfbericht werden auf Anfrage sofort bereitgestellt.

Kondisi: bekas, Tahun pembuatan: 2016, The PDFD line consists of two primary components: the DFC 60 tenoning and profiling machine (where the ends of the slats are machined) and the PHSL longitudinal finger-jointing press, which joins elements into slats up to 6.6 meters in length with the option to program up to eight intermediate cuts, dividing the slat into sections of operator-defined length. Between these main machines, there are transport units that also perform initial tenoning. The presented line configuration allows for a productivity rate of approximately 8,500 to 10,500 linear meters per shift. The machine has undergone a complete overhaul and comes with a one-year warranty. A microprocessor-based control system enables flexible adjustment of work parameters to suit user requirements. The machine can process both ‘calzing’-type elements and components for the production of edge-glued panels (‘line-jointed’). The implementation of a receiving table with automatic feeding of slats onto the PHSL press infeed conveyor allows for operation of the line by a single operator handling material input. The receiving table is equipped with a buffer shield, which increases efficiency and smooth workflow. The line operates in an automatic cycle with manual material feeding. The line’s components can be assembled in various configurations (to be agreed with the buyer), allowing the machine to be adapted to user’s facility layout. Technical Specifications: - Maximum input package width (tenoning and profiling machine): 650 mm Pedpfxsc U Txkj Aqvsgt - Width of glued elements: 30 – 155 mm - Length of glued elements: 170 – 900 mm - Thickness of glued elements: 20 – 70 mm - Operating air pressure: 0.6 MPa - Compressed air requirement: approx. 25 m³/h - Operating efficiency: up to 4 cycles/min (6,600 mm slat) - Length of glued element: 4,500 – 6,600 mm - Operating voltage: 3/N/PE 400 V 50 Hz - Control voltage: 24 V DC - Power requirement: max 100 kW Operating process: Wooden slats are placed by the operator onto the cart of the first tenoning and profiling machine. Feeding the pieces initiates the machining cycle. The first machine evens up the ends of the package and then cuts the finger-joint pattern. The package then moves to the table of the second machine, where the opposite side is machined and glue is applied. Elements from the DFC-60 D tenoner are transported via a chain conveyor to the preliminary tenoning unit, where a set of rollers and a pressure device apply initial pressure to the finger-joint profile on the scantlings prior to entering the press. The pre-tenoned scantlings are conveyed onto the press table; once the target length is achieved, they are cut. Then, using a pusher bar and clamping strip, they are transferred into the press bed area for pressing. The glued and pressed, finished slat is pushed onto the press's outfeed table. While the scantlings are moved to the press bed, the process of feeding elements onto the press table is carried out simultaneously, maintaining continuous press operation for higher gluing productivity.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, mesin pen-dowel MLKT otomatis setelah overhaul total dengan sistem pemberian lem otomatis Pedpfx Aoyhnpnoqvjgt

Kondisi: baru, Tahun pembuatan: 2024, Mesin amplas belt tipe throughput untuk bagian datar atau pipa kotak. Pjdjg R Sxvepfx Aqvegt Kapasitas kerja (mm): 120x140 Kecepatan sabuk amplas (m/dtk): 20 Ukuran sabuk amplas (mm): 120x1850 Kecepatan konveyor (m/menit): 12 atau 6+12 Motor sabuk amplas (kW): 3 Konsumsi (A): 7 Dimensi sekitar (mm): 975x880x1800 Berat sekitar (kg): 350