Beli Bundler / Peregangan Bander bekas (811)

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp, 500 mm long Manual roping device mounted on the frame at the pallet for reinforcement of the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and cycle end Emergency stop switch as per CE regulations Turntable always stops at initial home position Fall protection for film carriage Pushbuttons for machine power-on, as well as start & stop function & reset, Ø 22 mm, according to CE standards ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program changes F02 - Continuously variable turntable speed 5–12 rpm Carriage speed independently adjustable for up/down F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Photocell delay for wrapping height F13–F16 - Film application tension for base/top wrap and up/down direction, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) PROGRAMMABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrapping (up/down) F01 - 2 - Simple wrapping (up only or down only) F01 - 3 - Pushbutton for manual functions F10–F11 - Wrapping cycle with predefined start and stop height Kdodpfx Ajykucmsa Djp F12 - Wrapping to a preset height (with height sensor deactivated) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio preset to 200% Film application tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm; height = 500 mm; core Ø76 mm Standard power supply: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Further machines available ex-stock Ludwigsburg.

Tahun pembuatan: 2026, jam operasional: 2 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_03, Exhibition machine – like new. EVA Rotary table / Raised base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm 150 mm - 200 mm raised base frame, adjustable for loading with electric pallet truck Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Beep signal at start of wrapping and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Drop safety system for the film carriage Pushbuttons for machine power on, and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of lower wraps (1 – 10 wraps) F06 – Number of upper wraps (1 – 10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01-1 – Cross-wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a preset height (disabling the photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start function to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on the film carriage Kodpfx Aaeykud Do Dedp Film specifications: Max. external diameter Ø 250 mm – Core Ø 76 mm – Height 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total rated output: 1.2 kW / 6A Further units available from stock immediately.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MARATHON01, Semi-automatic manual stretch film wrapper MARATHON TECHNICAL DETAILS The world’s only "PATENTED" non-electric, mobile stretch wrapper capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight, and size It is recommended to use pre-stretched film with a maximum roll diameter of Ø 230 mm Minimum load size: 650 x 400 mm Minimum load weight: 50 kg Wrapping height (including pallet): 2000 mm Simple operation, without requiring motor power Manual movement by the operator The film carriage is moved up and down manually The machine features simplified operations Replaces hand wrapping Kdedpfx Aajykuf Io Djp MANUAL WRAPPING OPTIONS The operator acts as the motor, wrapping upwards and downwards as needed TYPE "FM" FILM CARRIAGE WITH MECHANICAL BRAKE With manually adjustable brake roller on the film carriage Film specification: max. external diameter Ø 230 mm – core Ø 76 mm – height = 500 mm Optional: stretch film with core Ø 50 mm or coreless Additional units available from stock in Ludwigsburg.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S23Synthesi01, Stretch wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Crash protection for the film carriage Push buttons for machine power on, start & stop functionality, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Stepless turntable speed control 5-12 rpm Carriage speed upwards and downwards independently adjustable F03 - Carriage speed upwards from 1.3 to 5.4 m/min F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photoelectric cell wrapping height delay F13 - F16 - Film tension for base & top wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (upwards only or downwards only) F01 - 3 - Push button for manual functions Kdjdjykuddjpfx Aa Dsp F10 - F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a stored height (with deactivation of the height sensor) F22 / F23 - Wrapping cycle for top cover sheet F29 - Soft start cycle for application of edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope winding (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manual brake roller adjustment on the film carriage Film specification: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection data: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Optional available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200 % Turntable size up to Ø 2600 mm Mast height up to 3900 mm Ramp Installation frame Photoelectric sensor for black products Cutting device etc. Other systems available from stock in Ludwigsburg. Pictures may include optional equipment at extra charge.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MythoSarya05, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control Ksdpsykuh Nefx Aa Dsdp

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS06, Demonstration Unit ATLANTA NEOS Stretch Wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Adjustable pre-stretch ratio from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick-load system (IEF) for easy film roll change Film specifications: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Max wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Protective rail for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for film carriage Start & Stop push buttons Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min - Carriage ascent and descent speed individually adjustable - Ascent speed: 1.3 – 5.4 m/min - Descent speed: 1.3 – 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Adjustable wrapping height - Film application tension for base/top wrap, ascent/descent independently adjustable - Film pre-stretch for base/top wrap, ascent/descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) Kdodpjyktv Sefx Aa Dsp - Simple wrapping (only up or only down) - Wrapping cycle with defined start and stop heights - Wrapping to a stored height (disabling height sensor) - Wrapping cycle for large pallets - Wrapping cycle for top sheet application - Soft-start cycle for installing edge protection - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or powered rope formation (optional) Other machines available immediately from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control Kdodpfx Aasykud Ro Djp

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm - 200mm, suitable for loading with electric pallet truck and forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Turntable always stops in start position Drop protection for film carriage Pushbutton (Ø 22 mm) for machine power-on as well as start & stop functions according to CE standards ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Single wrapping (only upwards or only downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a preset height (photoelectric sensor deactivated) Kdedpfx Aoykuhcsa Dep F29 – Soft start cycle for application of edge protection Soft start to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard supply connection: 230 V – 1L+N+PE – 50 Hz Total connected load: 1.2 kW / 6A Further units available from stock immediately.

Tahun pembuatan: 2021, jam operasional: 10 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S21MythoEasyLow04, Demo machine - like new. MYTHO EASY Low Very low-profile system in height Wrapping height: 2400 mm Turntable diameter: 1650 mm LP flat turntable: 30 mm flat, 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double-rope formation - see pictures. Automatic cutting Ksdpfx Aaex Ta Nxo Dsdp Optional: film clamp on the turntable German Schuko plug 6 individually programmable programs Additional demo units immediately available from stock. Prices ex stock Ludwigsburg

Tahun pembuatan: 2024, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS04,

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control Kdodpfx Asyktrtsa Djp

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS04, Exhibition unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120-400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film tension electronically controlled via control unit IEF quick-change system for easy film roll replacement Film specification: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, pallet included): 2,150 mm Height detection via light sensor or manual input on display Protective bar for emergency stop of drive system Emergency stop switch according to CE regulations Acoustic warning signal and beacon on machine start-up Anti-drop device for film carriage Push buttons for start & stop Machine operation in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All operating parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet, up to 80 m/min - Film carriage speed up and down infinitely adjustable - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of bottom wraps (1 - 10 turns) - Number of top wraps (1 - 10 turns) - Pallet wrapping height setting - Film tension for bottom & top wraps / ascent & descent separable Kodpfx Aaeykug Se Dodp - Film pre-stretch for bottom & top wraps / ascent & descent separable - Ergonomic height for film replacement PROGRAMMABLE WRAPPING CYCLES VIA PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upwards/downwards) - Simple wrapping (upwards only or downwards only) - Wrapping cycle with predefined start and stop height - Wrapping to a preset height (disables light sensor height control) - Wrapping cycle for large dimension pallets - Wrapping cycle for top sheet application - Soft start cycle for corner protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Further units available immediately from Ludwigsburg stock.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiLow05, Demo machine, as new. SYNTHESI with flat turntable Turntable height 25 mm Short ramp 500 mm long TECHNICAL DETAILS: LOW PROFILE Turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage lift speed upwards/downwards Acoustic signal at start of wrapping and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power, start & stop, and reset in accordance with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards can be adjusted independently F03 - Carriage lift speed upwards from 1.3 to 5.4 m/min F04 - Carriage lift speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) Kdjdsykuiajpfx Aa Dep F06 - Number of wraps at pallet top (1–10 wraps) F09 - Delay of photocell for wrap height F13–F16 - Film application tension base & top wrapping / ascent & descent individually adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (photocell height sensing disabled) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start function to reduce film tears on sharp pallet edges Wrapping cycle with manual or powered rope-threading (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch set to 200% Film application tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection: 230V – 1Ph+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Additional machines available from stock in Ludwigsburg.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently Kodpfx Aasykub As Dedp F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge. Illustration similar

Kondisi: bekas, Tahun pembuatan: 2012, Kami menawarkan unit bekas WK WK-TNV holder alat / dudukan alat ini, tahun produksi 2012. Kodpfxsx Iguds Aa Dedp Tipe: WK-TNV Tahun produksi: 2012 Nomor unit: 1309 Volume udara buangan (di inlet): 36.000 m³/jam Suhu ruang bakar maksimum yang diizinkan: 780 °C Tipe burner: WK-KAT-025-00/0 Daya burner: 650 kW Daya kipas: 200 kW Tekanan kipas: 3.500 Pa Efisiensi pemanas udara: % Suhu masuk maksimum yang diizinkan: 230 °C Laju alir pelarut maksimum yang diizinkan: 500 kg/jam Media pemanas: GAS ALAM Nilai kalor media pemanas: 32.900 kJ/m³ Konsumsi media pemanas maksimum: 749 m³/jam Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: bekas, Details on request Kodpfx Aasb E Evms Djdp

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 90 mm, lebar benda kerja (maks.): 3.200 mm, panjang benda kerja (maks.): 3.200 mm, ketebalan tepi (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finish milling cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Kdjdpeyq Avhefx Aa Dsp Belt sanding (1 motor) Glue scraper Polishing (2 motors) Spraying device TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 90 mm Max. panel length: 3,200 mm Max. panel width: 3,200 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm EQUIPMENT Feed chain with carriers Pressure with rubber belt Panel guide rails with NC positioning Edge spool magazine with 6 positions Hot melt glue system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on top cabinets The machine is sold and delivered in its actual and legal condition ("as seen and agreed") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7685

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Kdodpfx Ajyttrxja Dep Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: sangat baik (bekas), Dijual satu paket mata milling cakram dan holder merek Sandvik. Selain itu, juga disertakan roughing-finishing cutter. Lingkup penawaran sesuai dengan yang terlihat di gambar. Cakram milling tersedia dalam berbagai ukuran hingga diameter 300 mm. Holder Sandvik. Antara lain tipe-tipe berikut: Kdsdpfoyrnqtjx Aa Dep 391.01-50 50 060 391.10-27 391.10.63.63.080 391.42 391.20

Kondisi: baik (bekas), The listed driven tools VDI 50 are designed for a tool turret by SAUTER and are in good condition and fully functional. These tools have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufactured by NACKE + WTO, VDI 50 for SAUTER brand tool turret: Item No.: XVI 24275 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Kjdpfebql S Hox Aa Dsdp Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, pl-hu-1 Ksdpfew H Rzxjx Aa Djdp

Kondisi: baik (bekas), 16 holder alat ukuran ini. €50/unit Penjualan hanya untuk negara anggota Uni Eropa! Kdedpfjyzd H Rjx Aa Djp Tidak dijual kepada pribadi. Segala bentuk garansi dikecualikan. Kami tidak menjamin keakuratan data teknis dan tahun pembuatan, kelengkapan aksesori dan perlengkapan alat, maupun pemenuhan semua persyaratan keselamatan dan perlindungan lingkungan yang tercantum dalam peraturan pencegahan kecelakaan.

Kondisi: bekas, Sekitar 80 holder alat ukuran ini. €30/buah Kedpeyzdn Uofx Aa Dedp Penjualan hanya untuk negara anggota Uni Eropa! Tidak dijual kepada perorangan. Segala bentuk garansi dikecualikan. Kami tidak bertanggung jawab atas keakuratan data teknis dan tahun pembuatan, kelengkapan aksesori dan peralatan alat, serta kepatuhan terhadap semua persyaratan keselamatan dan lingkungan yang disebutkan dalam peraturan pencegahan kecelakaan.

Tahun pembuatan: 2005, Kondisi: baik (bekas), 7 pieces of driven tool holders suitable for CNC lathe TRAUB TNA 480, toolholder size VDI 40. Also compatible with SAUTER tool turrets with VDI 40 mount. 7 pieces horizontal, nos. 3/4/5/6/7/8/9, for drilling and milling – price per piece €550 2 pieces horizontal, nos. 1 and 2, for tapping – price per piece €600 1 NC drill chuck VDI 40, clamping range 1–13 mm – price €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm – price €150 Kdedpfohwnfkex Aa Dop

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, panjang total: 4.350 mm, gaya penjepit: 500 kN, Pembawa alat, pembawa teknikum Zettelmeyer W26/20 Kjdpoywtyfsfx Aa Dedp Saat ini dalam kondisi dilepas dan dibagi menjadi dua bagian. Pembawa ini telah direkondisi menyeluruh oleh DEGUMA-SCHÜTZ GmbH dan dijual kepada kami. DEGUMA-SCHÜTZ GmbH telah mengambil alih semua dokumen dari perusahaan Zettelmeyer dan juga dapat menyediakan suku cadang serta melakukan perbaikan. Informasi/dimensi yang lebih rinci dapat Anda lihat pada gambar produk dan dokumen deskriptif yang terlampir.