Beli Degraf Concept 201C bekas (638)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat gulungan: 2.000 kg, diameter mandrel: 508 mm, panjang mandrel: 420 mm, diameter meja putar: 1.350 mm, tr-coil-2024-001 Nedpfx Aoy Sl Rxoa Ujlb

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tingkat otomatisasi: manual, jenis aktuasi: manual, berat gulungan: 500 kg, diameter mandrel: 508 mm, panjang mandrel: 300 mm, diameter meja putar: 1.200 mm, Daya angkut: 2x 500 kg Nodsy Slu Djpfx Aa Uslb Tinggi lantai ke tengah poros: 850 mm Diameter luar stop: 1200 mm Panjang poros: 300 mm Rentang penjepitan poros: 300-610 mm Cincin pembatas coil: di kedua sisi Pengereman: handwheel, rem pita Penyesuaian poros: melalui handwheel, roda gigi bevel Penguncian bearing putar: pedal kaki Berfungsi sempurna dalam produksi hingga pembongkaran di pabrik pelanggan. Kami dapat mendukung Anda dalam integrasi dengan: Perencanaan Overhaul mekanis Pembuatan kontrol Pengecatan Konsep keselamatan Dokumentasi CE

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jenis aktuasi: manual, berat gulungan: 500 kg, lebar gulungan: 320 mm, diameter mandrel: 508 mm, diameter meja putar: 1.300 mm, Daya angkat: 2x 500 kg Tinggi dari lantai ke tengah poros: 1080 mm Diameter luar penahan: 1300 mm Lebar pita: maks. 320 mm Nljdoy Slrcjpfx Aa Uob Diameter nominal poros: 508 mm Cincin pembatas coil: kedua sisi Pengereman: Roda tangan, rem pita Pengembangan poros: Spindel ulir dengan kunci pas Penguncian bantalan putar: Pedal kaki Berfungsi dengan baik dalam produksi hingga dibongkar di pabrik pelanggan. Saat integrasi, kami dapat membantu Anda dengan: Perencanaan Perbaikan mekanis Pembuatan kontrol Pengecatan Konsep keselamatan Dokumentasi CE

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2002, berat gulungan: 1.500 kg, lebar gulungan: 425 mm, diameter mandrel: 508 mm, diameter meja putar: 1.500 mm, Daya angkut: 2x 1500 kg Tinggi dari lantai ke tengah poros: 1090 mm Diameter luar penahan: 1500 mm Panjang poros: 425 mm Diameter nominal poros: 508 mm Cincin pembatas coil: di kedua sisi Pengereman: pneumatik, cakram rem/kaliper Pelebaran poros: spindel ulir dengan kunci sok Penguncian bantalan putar: pedal kaki Nljdpfey Slp Ujx Aa Ueb Beroperasi dengan baik di produksi hingga pembongkaran di pabrik pelanggan. Sistem kontrol tidak tersedia. Kami dapat membantu Anda dalam integrasi dengan: -Perencanaan -Perbaikan mekanis -Pembuatan kontrol -Pengecatan -Konsep keselamatan -Dokumentasi CE

Kondisi: bekas, 1 Nljdpfxsy Sldfo Aa Ueb

Kondisi: baru, Trolley putar untuk pelat Nlodpfx Aajw I U A Is Usb baru cocok untuk panel saw bar tekanan Fimal Concept 350 lengkap termasuk 4 roda putar (2 buah dapat dikunci) 12 rol serbaguna dan meja penyangga yang dapat dilipat Ketersediaan: siap dalam waktu singkat Lokasi gudang: Hochheim

Kondisi: bekas, jarak tempuh: 10 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 02/2026, jenis bahan bakar: diesel, warna: oranye, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.590 mm, panjang ruang muatan: 3.201 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.961 mm, Perlengkapan: ABS, kunci sentral, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 26.977 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 09/2024, jenis bahan bakar: diesel, warna: merah, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 6.836 mm, lebar total: 2.040 mm, tinggi total: 2.590 mm, panjang ruang muatan: 4.118 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.961 mm, Perlengkapan: ABS, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 21.681 km, daya: 110 kW (149,56 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, pendaftaran pertama: 01/2025, kelas emisi: Euro 6, warna: hitam, jumlah tempat duduk: 6, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Siemens, produsen sumber laser: Max Photonics, model sumber laser: Max Photonics 6kW mit CE, daya laser: 6.000 W, ketebalan lembaran (maks.): 10 mm, ketebalan pelat baja (maks.): 10 mm, ketebalan maksimum lembaran baja tahan karat: 8 mm, tebal plat aluminium (maks.): 6 mm, ketebalan lembaran kuningan (maks.): 6 mm, ketebalan pelat tembaga (maks.): 6 mm, Diameter pipa (maks.): 240 mm, Panjang pipa (maks.): 6.050 mm, panjang kerja: 8.050 mm, lebar kerja: 250 mm, tinggi kerja: 250 mm, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 6.500 mm, jarak gerak sumbu Z: 280 mm, kecepatan pemakanan sumbu X: 116 m/menit, laju pemakanan gandar Y: 131 m/menit, laju pemakanan sumbu Z: 30 m/menit, akurasi pemposisian: 0,03 mm, akurasi pengulangan: 0,05 mm, berat benda kerja (maks.): 100 kg, daya: 6.000 kW (8.157,72 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: air, sambungan udara terkompresi: 8 batang, berat keseluruhan: 5.000 kg, panjang total: 12.500 mm, lebar total: 2.400 mm, tinggi total: 2.550 mm, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, With a completely redesigned machine concept, it combines maximum stability, highest efficiency, precise processing, and intelligent automation into one system. It is optimally suited for machining a wide variety of metal tubes and profiles—flexible, reliable, and powerful. A patented, innovative design combined with an exclusive automatic loading and unloading system ensures significantly increased productivity. The system operates faster, more stably, and intelligently, and is available in various configurations to suit your individual requirements. Thanks to improved dynamics and higher performance, the machine delivers outstanding results in all machining processes—whether cutting, drilling, or complex contour cutting. The cutting quality is at the highest level: smooth surfaces, minimal thermal impact, and virtually no residues or reworking required. Numerous patented core technologies guarantee consistently high machining accuracy and constant perfect results—even in demanding continuous operation. Even after many years of intensive use, the system’s performance remains at an exceptionally high level. Thus, you are investing in a sustainable, future-proof solution for your production. Njdpfx Asy R I R Esa Ujlb Cutting power 6000W Laser source MAX Photonics Laser head BOCI Autofocus Maximum tube length 6500mm Tube diameter 240mm Acceleration 1.2G

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Siemens, produsen sumber laser: Max Photonics, model sumber laser: Max Photonics 3kW mit CE, daya laser: 3.000 W, ketebalan lembaran (maks.): 8 mm, ketebalan pelat baja (maks.): 8 mm, ketebalan maksimum lembaran baja tahan karat: 6 mm, tebal plat aluminium (maks.): 4 mm, ketebalan lembaran kuningan (maks.): 4 mm, ketebalan pelat tembaga (maks.): 4 mm, Diameter pipa (maks.): 240 mm, Panjang pipa (maks.): 6.050 mm, panjang kerja: 8.050 mm, lebar kerja: 250 mm, tinggi kerja: 250 mm, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 6.500 mm, jarak gerak sumbu Z: 280 mm, kecepatan pemakanan sumbu X: 116 m/menit, laju pemakanan gandar Y: 131 m/menit, laju pemakanan sumbu Z: 30 m/menit, akurasi pemposisian: 0,03 mm, akurasi pengulangan: 0,05 mm, berat benda kerja (maks.): 100 kg, daya: 3.000 kW (4.078,86 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: air, sambungan udara terkompresi: 8 batang, berat keseluruhan: 5.000 kg, panjang total: 12.500 mm, lebar total: 2.400 mm, tinggi total: 2.550 mm, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, With a fully re-engineered machine concept, it combines maximum stability, highest efficiency, precise processing, and intelligent automation in one system. It is perfectly suited for machining a wide variety of metal tubes and profiles – flexible, reliable, and powerful. A patented, innovative design combined with an exclusive automatic loading and unloading system ensures significantly increased productivity. The system operates faster, more stably, and more intelligently, and is available in various configurations – tailored to your individual requirements. Thanks to improved dynamics and enhanced performance, the machine delivers outstanding results in all processing operations, whether cutting, drilling, or complex contour cutting. Cutting quality is at the highest level: smooth surfaces, minimal thermal impact, and virtually no residues or post-processing required. Numerous patented core technologies guarantee consistently high machining accuracy and consistently perfect results – even under demanding continuous operation. Even after many years of intensive use, the system’s performance remains at an exceptionally high level. This makes it a sustainable, future-proof investment for your production. Nljdpfey R I Rxsx Aa Uob Cutting power 3000W Laser source MAX Photonics Laser head BOCI Autofocus Max tube length 6500mm Tube diameter 240mm Acceleration 1.2G

Kondisi: baik (bekas), Tahun pembuatan: 2005, Ref. No.: 16369 Manufacturer: BATTENFELD Model: EM 75-120 Unilog B4 All-electric Year of manufacture: 2005 Clamping Unit Clamping force: 75 tons Opening stroke: 800 mm Tie bar spacing (h x v): 405 x 405 mm Minimum mold height: 150 mm Maximum mold height: 480 mm Injection Unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight (PS): 27 g Injection pressure: 2440 bar Dimensions and Weights Dimensions (LxWxH): 4.5 x 1.7 x 2.0 m Machine weight: 4,500 kg Additional information: BATTENFELD EM 75/120 UNILOG B4 Fully electric precision injection molding machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality, fully electric injection molding machine manufactured in Austria. The EM series from BATTENFELD was among the most advanced servo-electric machine concepts of its class at the time, designed specifically for energy-efficient and highly precise production processes. All main movements of the machine are powered by state-of-the-art servo drives. As a result, the machine offers: * Extremely low energy consumption * High repeatability * Smooth and quiet operation * Low maintenance costs * Stable and precise production processes This machine is especially suitable for: * Technical plastic parts * Electronic components * Precision parts * Small- and medium-batch production runs Thanks to the all-electric technology, the machine delivers significantly better energy efficiency and process stability compared to conventional hydraulic machines. Nedpfxewl Rucs Aa Uelb Equipped with the proven BATTENFELD UNILOG B4 control system, the machine offers: * User-friendly operation * Precise process control * Stable cycle times * Reliable servo axis control The machine has approximately 69,094 operating hours and is in good visual and technical condition. Highlights include: * A clean control cabinet * Well-maintained mechanical components * Well-preserved servo units * A clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastics production.

Kondisi: bekas, jarak tempuh: 31.295 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 04/2025, jenis bahan bakar: diesel, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.590 mm, panjang ruang muatan: 3.201 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.961 mm, Perlengkapan: ABS, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 10 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 03/2026, jenis bahan bakar: diesel, warna: abu-abu, tipe perpindahan gigi: otomatis, jumlah tempat duduk: 7, panjang total: 7.004 mm, lebar total: 2.098 mm, tinggi total: 2.321 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 10 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 03/2026, jenis bahan bakar: diesel, warna: abu-abu, tipe perpindahan gigi: otomatis, jumlah tempat duduk: 7, panjang total: 7.004 mm, lebar total: 2.098 mm, tinggi total: 2.321 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP),

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 300570120020, masa garansi: 6 bulan, lebar total: 1.000 mm, panjang total: 3.000 mm, tinggi total: 2.800 mm, tahun perombakan terakhir: 2026, Lini produksi roti WP Selecta SC48 Mesin untuk produksi roti: bulat polos, ganda, dan berbentuk lonjong. Spesifikasi teknis: Waktu fermentasi awal adalah 12 menit. Konsep mesin yang fleksibel dan modular, Konfigurasi mesin dapat disesuaikan dengan spesifikasi produk yang dibutuhkan, Konstruksi dari stainless steel, Tersedia integrasi dengan robot pemuat loyang, Nljdpfx Asy N Ubhja Usb Kapasitas produksi variabel, Proses produksi otomatis, Kualitas produk konsisten, Berat: 35 - 90 g, Kapasitas: maks. 4.500 pcs/jam.

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 22 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61035145, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, volume langkah: 393 cm³, tekanan injeksi: 2.429 batang, berat injeksi: 140 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 120 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 450 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 6.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we are offering our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry solution for all-electric injection moulding, enabling quick and innovative responses to market demands. It combines high performance, simple operation, and short delivery times. The machine is suitable for a wide variety of applications, including packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine concept – Fast and reliable delivery due to the base machine concept featuring a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, Year 2013) CONTROL - MC P1 with 15'' TFT colour display featuring multi-touch functionality CLAMPING UNIT - Clamping force: kN 1200 - Maximum mould opening force: kN 180 - Clear space (h x v): mm 520 x 470 - Mounting platen dimensions (h x v): mm 690 x 640 - Minimum–maximum mould height: mm 180–450 - Maximum opening stroke: mm 850 - Maximum mould opening travel: mm 450 - Ejector drive: electric - Ejector stroke: mm 120 - Ejector force fwd/rev: kN 27 / 33 - Ejector speed fwd/rev: mm/s 300 / 300 - Maximum mould weight: kg 850 INJECTION UNIT - Screw diameter / type: mm 35 / standard - Effective L/D ratio: 22.9 - Injection pressure: bar 2429 - Shot volume: cm³ 154 - Shot weight at max. stroke for PS: g 140 - Injection speed: mm/s 200 - Injection rate: cm³/s 192 - Screw speed: rpm 374 - Plasticising rate (standard screw): g/s 18.9 Nsdpfxoy Rmwdj Aa Ujlb - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 22.7 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight including control cabinet: t 6.7 - Length x width x height: m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve: single (BWAP) - Pneumatic control for hot runner shut-off: single - Electrical interface for pneumatic cascade: 4-fold - Euromap interfaces for automation: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold: 4-fold - Electrical prewiring for external hydraulic unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding function - Graphic analysis package - Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 1.609 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61008195, gaya penjepit: 800 kN, diameter sekrup: 40 mm, jarak antara tiang: 420 mm, volume langkah: 201 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 183 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 750 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g, Injection moulding machines direct from the manufacturer! As a manufacturer, KraussMaffei offers you our inspected and flexible stock machines: The fully hydraulic CX series features an especially compact, efficient, and flexible two-platen machine. The highly compact two-platen design with cantilevered clamping unit provides generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further offers a powerful basis to meet the highest demands, ensuring the right solution for any application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display with multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Maximum mold opening force: kN 55 Njdjy Rlmwjpfx Aa Uslb - Clear space between tie bars (H x V): mm 470 x 420 - Mounting platen size (H x V): mm 670 x 670 - Minimum/maximum mold height: mm - Maximum opening stroke: mm 750 - Maximum mold opening travel: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force fwd/back: kN 23 / 10 - Ejector speed fwd/back: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT - Screw diameter/type: mm 40 / Standard (customization possible) - Effective L/D ratio: 20 - Injection pressure: bar 1,860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow rate: cm³/s 126 - Screw drive/rotation speed: 1/min 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phases with neutral WEIGHT & DIMENSIONS - Net weight with control cabinet: t 3.55 - L x W x H: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control circuit for nozzle heating - 1-way air valve (BWAP) - Pneumatic hot runner shutdown control, 1-way - Hydraulic core pull, 1-way (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression function - Graphic analysis package The machine is located at our facility in Parsdorf and is available at short notice. Additional options are available upon request. We look forward to your inquiry.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 240 kg, panjang total: 1.010 mm, lebar total: 515 mm, tinggi total: 450 mm, laju aliran volumetrik: 250 m³/jam, tekanan akhir: 100 batang, tegangan masuk: 400 V, frekuensi input: 50 Hz, arus masuk: 11 A, jenis arus masuk: tiga fasa, jenis pendinginan: udara, kecepatan rotasi (maks.): 3.000 rpm, masa garansi: 12 bulan, INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY & LOW MAINTENANCE For sale: BUSCH MINK MM 1252 AV vacuum pump – this model is designed for those seeking energy savings (60%) and zero maintenance. ✅ Outstanding Technical Features: Nlsdpfxjy Rrt Ro Aa Usb Mink Technology: Two claw rotors turn in opposite directions without contact. This ensures no component wear, eliminating the need to replace vanes or lubricants in the compression chamber. Energy Efficiency: Up to 60% energy savings compared to conventional technologies with equivalent pumping speed. Dry Operation: No operating fluids required, eliminating oil purchase and disposal costs. Zero Maintenance: Inspection and component replacement tasks are reduced to an absolute minimum. ✅ Included Equipment: Integrated check valve on suction side (G2). Integrated silencer for quiet and stable operation. Inlet filter with protective paper cartridge pre-installed. High-efficiency IE2/IE3 asynchronous motor, directly coupled. ✅ Ideal Applications: Perfect for CNC machining centers, pneumatic conveying, plastics industry, and industrial processes requiring constant, clean vacuum 24/7. Thanks to the non-contact compression design, performance remains high throughout the device’s lifetime. Commercial Advantages: ✔ Original Busch unit (Global leader) ✔ Install & Forget technology ✔ Ready for delivery and warranty included

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W1T96340410709809, jarak tempuh: 252.534 km, daya: 390 kW (530,25 hp), pendaftaran pertama: 09/2023, jenis bahan bakar: diesel, berat kosong: 8.236 kg, berat muatan maksimum: 9.764 kg, berat keseluruhan: 18.000 kg, ukuran ban: 315/60 + 295/60 R 22.5, kondisi ban: 40 persen, konfigurasi gandar: 4x2, jarak roda: 3.700 mm, inspeksi berikutnya (TÜV): 04/2027, bahan bakar: diesel, kapasitas tangki bahan bakar: 940 l, rem: retarder, warna: kuning, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, jumlah tempat tidur: 2, Tahun pembuatan: 2023, Perlengkapan: ABS, AdBlue, Bluetooth, Port USB, Tachograph, asisten tetap jalur, bantuan mulai menanjak, filter jelaga, kantung udara, kendali jelajah, komputer bawaan, kontrol traksi, kulkas, kunci diferensial, kunci sentral, lampu depan tambahan, lampu kabut, pemanas jok, pemanas parkir, pendingin udara, pendingin udara parkir, pengaturan jendela elektrik, program stabilitas elektronik (ESP), retarder, sistem navigasi, spion elektrik, spoiler, tangki bahan bakar kedua,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 2.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7023000520B, panjang pembubutan: 705 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 50 mm, jarak gerak sumbu Z: 795 mm, diameter ayun di atas peluncur silang: 742 mm, diameter ayun di atas peluncur melintang: 920 mm, Attention – Images of milling accessories from other machines were mistakenly included in this auction listing and have now been removed. Please refer to the updated scope of delivery as shown in the current images – approximately half of the accessories pictured belong to this machine. TECHNICAL DETAILS Working Area Swing diameter over bed (max.): 920 mm Swing diameter over cross slide (max.): 742 mm Turning length (max.): 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Sub-Spindle Power: 11/7.5 kW Nodpfjy Rxtwox Aa Uslb Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank cross-section: 25 mm Driven tool speed (max.): 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation dimensions: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Sub-spindle Main spindle with 10-inch chuck Sub-spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring system Parts catcher Workpiece ejector Interface for bar feeder

Kondisi: baru, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €123,713 Leasing rate: €2,338.18 Pressing force: 320 tonnes Bending length: 4,050 mm Axes: Y1 / Y2 / X axis Stroke: 365 mm Distance between uprights: 3,600 mm Throat depth (side frame): 450 mm Installation height: 630 mm Drive concept: hydraulic Rapid approach speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 250 l Motor power: 18.5 kW Length: 5,250 mm Width: 1,770 mm Height: 2,850 mm Weight: 20,000 kg Standard equipment: - 3 axes (Y1, Y2, X) - CNC CONTROL DT-15 - 2D graphic display 15” - Intuitive touch-screen operation (easy contour drawing with finger) - User-friendly dialog-guided programming - Automatic bending sequence calculation - Automatic calculation of blank length for sheet cutting - Graphical product and tool memory - Correction functions - USB ports for backup and program storage - PC software to create programs on PC and transfer to machine via USB - Servo-driven backgauge on linear guides and ball screws - Backgauge fingers on double linear guides - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Fiessler AKAS laser safety device, mounted on upper beam - Sheet support arms on linear guides - Equipment in accordance with CE standards - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Greater stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Faster backgauge - Backgauge fingers on double rather than single linear guides - More available options such as additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bend supports, laser angle measurement, tandem design, alternative CNC controls, etc. Options: - R-axis - R/Z1/Z2 axes - DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) Nsdpowirfqefx Aa Uslb - CNC control SKY22 - CNC control Delem DA66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import

Kondisi: bekas, jarak tempuh: 10 km, daya: 151 kW (205,30 hp), pendaftaran pertama: 01/2026, jenis bahan bakar: diesel, warna: abu-abu, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 5, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.355 mm, panjang ruang muatan: 2.250 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.626 mm, Perlengkapan: ABS, kunci sentral, pemanas parkir, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 418.041 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 03/2022, jenis bahan bakar: diesel, berat kosong: 8.432 kg, berat muatan maksimum: 9.568 kg, berat keseluruhan: 18.000 kg, ukuran ban: 385/55 R22,5, jarak roda: 3.700 mm, inspeksi berikutnya (TÜV): 05/2027, rem: retarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat tidur: 2, panjang total: 25.000 mm, lebar total: 39.290 mm, tinggi total: 61.580 mm, Tahun pembuatan: 2022, ukuran ban depan: 315/70 R22,5, Perlengkapan: ABS, kendali jelajah, kunci diferensial, pemanas parkir, pendingin udara, sistem navigasi, spoiler,

Kondisi: baru, Tahun pembuatan: 2025, Ref. No.: 10465 Manufacturer: IGREK Model: FR 1000 T Year of manufacture: 2025 Control type: CNC control Control system: Siemens / Heidenhain Location: Istanbul Country of origin: Türkiye X-axis travel: 1,350 mm Y-axis travel: 1,500 mm Z-axis travel: 900 mm B-axis: ° C-axis: 360° Spindle taper: HSK-T100 Rotary table diameter: 1,000 mm Table load capacity: 2,000 kg Tool magazine with: 48 pcs. Spindle speed: 15,000 rpm Rapid traverse X/Y/Z: 48 m/min Spindle motor power: 35 kW Max. spindle torque: 220 Nm Machine length: 3,200 mm Machine width: 6,400 mm Machine height: 4,050 mm Approx. machine weight: 40 t Additional information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center offering 5-axis simultaneous machining, combining advanced technology in a compact design. Manufactured in 2024, this machine is available for immediate use and ideally suited for precise machining of medium-sized workpieces across various industries. Key features: Compact performance: Travel distances of 1,350 mm (X), 1,500 mm (Y), and 900 mm (Z), with a table load capacity of up to 2,000 kg, provide optimal conditions for flexible applications. 5-axis simultaneous machining: Featuring a B-axis (°) and a C-axis (360°), even complex geometries can be machined with high accuracy. High-performance spindle: The spindle achieves speeds up to 15,000 rpm, a maximum torque of 220 Nm, and a drive power of 35 kW—ideal for demanding milling tasks. Enhanced capacity: A tool magazine with 48 stations and HSK-T100 interface ensure quick tool changes and efficient processes. First-class speed: With rapid traverse rates of 48 m/min on all axes, machining times are reduced to a minimum. Technical highlights at a glance: - Travel distances: X 1,350 mm / Y 1,500 mm / Z 900 mm - Rotary table diameter: 1,000 mm - Max. table load: 2,000 kg - Spindle power: 35 kW - Spindle speed: up to 15,000 rpm - Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm - Weight: approx. 40 tons Nledpfx Aasxmd S Ie Uob Additional advantages: Thanks to state-of-the-art controls (Siemens or Heidenhain) and a robust machine design, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer provides international service and comprehensive warranty coverage. Discover the IGREK FR 1000 T as your dependable partner for precise and efficient manufacturing—now available from stock. Contact us for further information!