Beli Denios Polysafe Euroline F2-200 bekas (17.095)

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter pressure vessel is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a built-in water separator, which removes moisture from the compressed air to prevent the blasting media from clumping due to excess humidity. For safe operation, our safety shut-off system is included. This starts and stops the blasting process with the actuation of the hand lever, which is mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently installed - Water separator 1 1/4", permanently installed - SAPI safety shut-off system Technical data - Pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosage valve (suitable for all common media) - Capacity: 200 liters - Total height: 1,420 mm - Vessel diameter: 600 mm - Total diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest shut-on and shut-off times in compliance with trade association regulations (VBG 48) - Pressure can be precisely set before blasting – continuously adjustable from 0.1 to 12.0 bar Nodpfxowc Rk Ej Aa Uslb - Lower media consumption, as the pressure vessel remains constantly pressurized and no unnecessary run-on is required - Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up required → less consumption & less hose wear - No condensate formation in the vessel, as it remains constantly pressurized → no venting or aeration required at each start/stop - Optimum blasting media dosing through hardened fine dosing valve - Reduced compressed air requirement → noticeably lower diesel consumption - One-man operation, as the pressure can be displayed and adjusted directly at the manometer – also possible without starting the machine - No sensitive components such as control valves, membranes, or seals → low-maintenance and reliable - Only the blasting hose at the safety shut-off requires regular inspection and replacement if necessary

Tahun pembuatan: 2018, Kondisi: baik (bekas), We are selling a Klepp gas filtration system certified to ATEX "e" II 3 G. This unit provides a permanent and optimal solution for the extraction and filtration of gaseous pollutants. Nedpjm Ak Rmofx Aa Uolb

Tahun pembuatan: 1960, Kondisi: belum diuji (bekas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. drawing force: 20 t Max. stroke: 2000 mm Max. cutting speed: 5.6 m/min Nledpfx Aajhu E Egs Usb Max. return speed: 30 m/min Max. workpiece diameter: Ø 300 mm Max. tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Kondisi: bekas, nomor mesin/kendaraan: SN: R050A-24E0011, Feeder I-PULSE F2 F2-44mm___1 unit F2-32mm___2 unit Nodpfxeww Etwj Aa Uslb F2-24mm___4 unit F2-16mm___5 unit F2-12mm___6 unit F2-84mm___39 unit F2-82M_mm___6 unit Feeder Stick____1 unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, Hans Schoen NH/LF 200 (UVV) – powerful & robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on unit) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing operations • Hydraulic drive system for precise force and stroke control • Column gap: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient working distances • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (usually PLC/Siemens control available) • Safety and UVV approval for hand-insertion work – enhanced operator safety 💡 With its robust design, this press is ideal for series production, drawing and forming processes, as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable fixed stop • Pressure shut-off • Pressure switch • UVV-compliant safety measures → all for efficient and safe workshop operation Currently UVV-inspected. ⸻ 🛠️ Applications This press is highly versatile, suitable for: • Metal forming / drawing operations • Assembly and joining part production • Testing and quality assurance processes • Small and large series production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – heavy-duty industrial construction Nlodpfsx Ry Nyex Aa Ueb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 450 kg, panjang total: 1.600 mm, lebar total: 1.100 mm, tinggi total: 1.700 mm, daya: 7,5 kW (10,20 hp), jenis arus masuk: tiga fasa, For sale is a pulverizer previously used for trial fine grinding applications in the food industry. The machine is robust, reliable, and powerful. Technical specifications: + Power output: 7.5 kW + Processing capacity: 20–50 kg per hour + Weight: 450 kg Nedpfxsudvt Re Aa Uelb With the use of liquid nitrogen, the machine is immediately ready for operation—simply plug it in and start. It is still in near-new condition and can be inspected by appointment. The sale price is subject to an additional 19% VAT. If you are interested or have any questions, we look forward to your inquiry.

Kondisi: sangat baik (bekas), 56c2ca1180f116f2 Njdpfx Aexbq Irsa Uelb

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2035601, panjang total: 1.350 mm, lebar total: 730 mm, tinggi total: 700 mm, jenis bahan bakar: listrik, Kompresor sekrup Mycom F200VMDD-MS bekas dengan Freon. Spesifikasi Merek: Mycom Tipe: F200VMDD-MS Refrigeran: Freon Tahun pembuatan: 2001 Dimensi: 1350x730x700 mm (PxLxT) Nledjrlk Aqopfx Aa Ujb Jumlah stok: 3 unit

Kondisi: bekas, MRF FBF 2000 CNC Bed Mill, Kepala Universal, Sistem Kontrol Fagor, meja slot-T 2000mm x 500mm, kecepatan 45-1700 rpm, spindle 45 int, (6) holder alat, nomor seri 2000023, pelumas Intza, sistem keselamatan rem Jet, pedal kaki operator, pelindung meja dengan interlock, pelindung spindle dengan interlock, Servomotor ISOFLUC, tangki pendingin, (2) ragum self centring terpasang di meja. Njdpfx Aajx I Sb Ao Uolb

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Tahun pembuatan: 2000, jam operasional: 50.000 h, nomor mesin/kendaraan: L00620269, Ersetzte LASMAC LC-1212 x III Lasermaschine, defekt. Könnte renoviert werden oder eignet sich als Ersatzteilspender beziehungsweise zum Ausschlachten für Schrott. Nedpfxew Dqt Nj Aa Uslb

Kondisi: hampir baru (bekas), Als neue Stapelbehälter (Tote Bins) Nledpfxsu Ti Slj Aa Ujb Fassungsvermögen: 200 Liter Mobil auf 4 Nylonrollen Teilweise komplett mit Deckel Menge: 10 Stück verfügbar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 13.006 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190433, panjang pembubutan: 1.050 mm, diameter pembubutan: 660 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 1.050 mm, model controller: Mazatrol Matrix, de-hu-01 Nlsdpfoy Slqfex Aa Ueb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 63.778 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06800002061, kecepatan rotasi (maks.): 6.000 rpm, lubang spindel: 56 mm, diameter spindel: 90 mm, berat kosong: 6.000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse speed X: 100 m/min Rapid traverse speed Z: 45 m/min Chuck diameter: 200 mm Spindle nose, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Positioning accuracy (static): < 0.02 degrees Number of tool stations: 12 Shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Nljdpfx Aaoy T Ikks Usb Speed: max. 6,000 rpm MACHINE DETAILS Main drive (three-phase): 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Clamping device pressure: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 74.523 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06800001121, kecepatan rotasi (maks.): 6.000 rpm, lubang spindel: 56 mm, diameter spindel: 90 mm, berat kosong: 6.000 kg, en-001 Nedoy T Id Dspfx Aa Uslb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 77.119 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06810000041, kecepatan rotasi (maks.): 6.000 rpm, lubang spindel: 56 mm, diameter spindel: 90 mm, berat kosong: 6.000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse speed X: 100 m/min Rapid traverse speed Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, brake holding torque: 240 Nm Positioning accuracy at standstill: < 0.02 degrees Number of tool stations: 12 Njdpfey T Iddsx Aa Uslb Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Three-phase main drive power: 25 kW Torque at 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Clamping device pressure: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 7.610 h, tegangan masuk: 400 V, arus masuk: 10 A, tinggi total: 1.650 mm, panjang total: 4.400 mm, lebar total: 1.000 mm, de-to-hu-it-lt-001 Njdpfx Aasy Tnuve Uelb

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 300 kW (407,89 hp), berat keseluruhan: 65.000 kg, ukuran ban: 6*2, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, konfigurasi gandar: 3 gandar, kelas emisi: Euro 3, Tahun pembuatan: 2026, nomor mesin/kendaraan: V9638J96, Perlengkapan: hidrolik, komputer bawaan, penggerak semua roda, Sand- und Kiesaufbereitungsanlage | MINGYUAN Schwerindustrieausrüstung Eine Sand- und Kiesaufbereitungsanlage ist ein integriertes System zur Herstellung hochwertiger Baustoffe wie Sand, Kies, Splitt und künstlichem Sand. MINGYUAN bietet komplette Lösungen für das Brechen und Sieben von Zuschlagstoffen für Steinbrüche, den Bergbau, den Bau sowie Infrastrukturprojekte und gewährleistet dabei eine effiziente Materialaufbereitung und gleichbleibende Produktionsleistung. Allgemeine Beschreibung Die Sand- und Kiesproduktionslinie von MINGYUAN kombiniert fortschrittliche Brech-, Sieb-, Wasch- und Fördertechnik, um Rohmaterialien wie Kalkstein, Granit, Basalt, Flusskies und Quarz zu Baustoffsanden und Kies unterschiedlicher Körnung zu verarbeiten. Die Anlage umfasst in der Regel Backenbrecher, Prallbrecher, Kegelbrecher, Vibrationssiebe, Sandwaschanlagen, Bandförderer und Entstaubungsanlagen und bildet so ein vollständiges, automatisiertes Produktionssystem. Anwendung findet sie im Straßenbau, in Betonmischwerken, im Baustoffsektor und in Wasserkraftprojekten. Leistungsspektrum: 30–1.000 Tonnen pro Stunde (kundenspezifisch anpassbar) Aufgabekörnung: ≤800 mm (abhängig vom Brechertyp) Endkörnungen: 0–5 mm (Sand), 5–10 mm, 10–20 mm, 20–40 mm (Kies) Hauptausstattung: Backenbrecher (PE/PEX-Serie), Kegelbrecher, Prallbrecher, VSI-Sandhersteller, Vibrationsförderer, Vibrationssieb, Sandwaschanlage, Bandförderer, Steuerungssystem Energieversorgung: Elektrisch oder dieselbetrieben wählbar Automatisierung: PLC-Steuerung mit Echtzeitüberwachung und einstellbarer Kornverteilung Die MINGYUAN Heavy Industrial Equipment Co., Ltd. bietet komplette Lösungen für Sand- und Kiesaufbereitung mit zuverlässiger Leistung, wettbewerbsfähigen Preisen und professionellem After-Sales-Service für Kunden weltweit in der Bergbau-, Bau- und Zementindustrie. 2. Brechen und Sieben: - Die gewonnenen Rohstoffe müssen häufig gebrochen und gesiebt werden, um die Teilchengröße zu verringern und nach Korngrößen zu sortieren. Nledpfx Asq Nia Ioa Ujb - Brecher zerkleinern größere Gesteinsbrocken, und Siebe trennen das Material nach Korngröße. 3. Waschen: - Durch das Waschen werden Verunreinigungen wie Ton, Schluff und Staub aus den Rohstoffen entfernt. Dies ist besonders bei Zuschlagstoffen für den Bau wichtig. 4. Klassieren und Sortieren: - Nach der Wäsche werden die Materialien häufig klassiert und sortiert, um sie nach Kornfraktionen und Qualitätsstufen separieren zu können. 5. Lagerung und Haldenbildung: - Aufbereitete Materialien werden in Halden zwischengelagert. Geeignete Lagermöglichkeiten sind notwendig, um verschiedene Körnungen zu managen. 6. Förderung und Transport: - Förderbandsysteme transportieren die Materialien zwischen den verschiedenen Verfahrensstufen. Den Abtransport zur Verteilung übernehmen Lkw oder Förderbänder. Schlagworte Sandproduktionslinie, Kiesaufbereitungsanlage, Zuschlagstoff-Brecheranlage, Steinbrecher, Sandherstellungsmaschine, Sandwaschanlage, Vibrationssieb, Backenbrecher, Kegelbrecher, Prallbrecher, VSI-Brecher, Steinbruchausrüstung, Bergbaumaschinen, Baustoffzuschlagstoffe, künstlicher Sand, Splitt, Flusskies, Kalksteinbrecher, Basaltbrecher, Granitbrecher, Sandwaschanlage, Siebanlage, Fördersystem, MINGYUAN Sandanlage, Aufbereitungsmaschinen für Zuschlagstoffe, Steinbrechlinie, Sand- und Kieswaschanlage, Hochleistungsbrecher, Umweltfreundliche Sandanlage, Hersteller von Zuschlagstoffproduktionsanlagen.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 170 kg, kecepatan spindle penggilingan: 45.000 rpm, kecepatan spindel (min.): 5.000 rpm, kecepatan spindel (maks.): 45.000 rpm, diameter penjepit: 140 mm, panjang penjepitan: 2.000 mm, masa garansi: 12 bulan, DE2001 Nledexrnchopfx Aa Uob

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 450 kW (611,83 hp), Tahun pembuatan: 2025, de Nedpfx Aaeq Nfvue Uelb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, IN11803-37 Nsdjwn Hfiopfx Aa Uslb

Kondisi: sangat baik (bekas), Electric Handheld Nibbler TruTool PN 200 Product Description Nledpfx Aeuhm E Sea Usb The new TruTool PN 200 electric nibbler is primarily used for cutting C, L, and U profiles, trapezoidal sheet metal, and similar components. This machine features a short tool, suitable for processing sheet metal with profile depths up to 85 mm and for C, L, and U profiles. Also suitable for corrugated sheets. Ideal for hard-to-access areas. The working direction can be adjusted 360° easily and tool-free in 45-degree increments. Minimal retooling time; punch and die can be changed quickly without interruptions or tools. Unrivalled cutting speed: fast and efficient, 2.1 meters per minute on mild steel (400 N/mm²). Applications: Trapezoidal Sheet For cutting profiles with depths up to 86 mm and widths of 132.5 / 40 mm. Suitable for straight and angled cuts. Profiles For cutting C, L, and U profiles. Corrugated Sheet For trimming and cutting. Suitable for angled cuts as well as interior and radiused cutouts. • MAXIMUM SHEET THICKNESS: • MAX. SHEET THICKNESS – STEEL 400 N/MM²: 2 mm • MAX. SHEET THICKNESS – STEEL 600 N/MM²: 1.5 mm • MAX. SHEET THICKNESS – STEEL 800 N/MM²: 1 mm • MAX. SHEET THICKNESS – ALUMINIUM 250 N/MM²: 3 mm • RADII: • MINIMUM RADIUS: 50 mm • GENERAL INFORMATION: • WORKING SPEED: 2.1 m/min • STROKES AT RATED LOAD: 1500 /min • STARTING HOLE DIAMETER: 24 mm • NOMINAL POWER CONSUMPTION: 550 W

Kondisi: bekas, Technical details: Sheet width – max.: 200 mm Sheet thickness: 10 mm Nedpeu Icqajfx Aa Ujlb Blade length: 175 mm Round section: Ø 20 mm Square section: 18 mm Height above floor level: 900 mm Machine weight approx.: 200 kg Machine dimensions approx. LxWxH: 0.73 x 0.66 x 2.3 m Frame/table dimensions L x W x H: 0.73 x 0.66 x 0.60 m MECHANICAL HAND LEVER SHEAR Welded steel construction with angle sections - with base frame - Hand lever length = 1,300 mm, with safety lock *

Kondisi: bekas, Rincian teknis: Lebar material: 400 mm Nledpsu Ic Dyofx Aa Ujb Ketebalan material: 2 mm Jumlah rol penyearah: atas: 5x / bawah: 6x Lebar rol: 410 mm Kecepatan proses: 9-20 m/menit Kebutuhan daya total: 5,5 kW Berat mesin sekitar: 1,3 t Kebutuhan ruang sekitar: P:2,1 x L:1,0 x T:1,35 m Deskripsi: - Rol atas dapat diatur hingga 14 mm, tidak digerakkan - Rol bawah tidak dapat diatur, digerakkan - Masing-masing 1x rol masuk/keluar (Ø 35x410mm) Perlengkapan: - Dudukan drum (P:1,2xL:0,7xT:1,16m) dengan 4 roda jalan dan kereta pemandu - 2 pembatas masuk/keluar Mesin penyearah ini harus terintegrasi secara elektrik ke mesin lain oleh pihak pelanggan! SIAP DIGUNAKAN.

Kondisi: bekas, Technical details: Diameter: 200 mm Passage: 50 mm Nledpfxeu Nln Do Aa Ueb Width: 65 mm Approx. machine weight: 45 kg Stationary vise SSH 200 Hydraulic power chuck Features: • Chuck flange Ø 280 x 17 mm with 4x / 18x30 mm clamping grooves • Base flange Ø 290 x 30 mm • Flange mount Ø 140 x 10 mm • 20 sets of various shaped jaws

Kondisi: bekas, Technical details: Material width: 200 mm Material thickness: 1.5 mm Number of straightening rollers: 5x upper Number of rollers: 6x lower Pass-through speed: unknown m/min Electric supply: 220/50 A/Hz Total power requirement: 1.5 kW Machine weight approx.: 0.447 t Space requirement approx.: L:0.88 x W:0.76 x H:1.26 m Njdeu Ic D Tepfx Aa Uolb Description: The machine is equipped with 11 rollers. Upper roller: width 210 mm; Ø approx. 60 mm; powered; adjustable Lower roller: width 210 mm; Ø approx. 60 mm, powered, not adjustable.