Beli Hatastar Pb 135X4600 bekas (689)

Kondisi: bekas, jarak tempuh: 25.790 km, daya: 121 kW (164,51 hp), pendaftaran pertama: 08/1995, jenis bahan bakar: diesel, berat keseluruhan: 7.490 kg, warna: merah, tipe perpindahan gigi: mekanis, jumlah tempat duduk: 9, panjang total: 6.300 mm, lebar total: 2.500 mm, tinggi total: 3.050 mm, Perlengkapan: penggerak semua roda,

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 60 t, panjang langkah: 160 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 90 mm/dtk, kedalaman tenggorokan: 320 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, Standard Equipment Stroke: 160 mm Daylight (Lower – Upper Beam Gap): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Machine Features - Double-cylinder upper beam bending system - Steel main frame and upper beam construction for high static and dynamic rigidity - Upper beam movement supported by fiber slideways - High strength torsion shaft and eccentric bearing system for parallelism - Mechanically adjustable stroke within cylinder for motor-controlled angle setting - Wide operating opening suitable for use with various dies - Ton capacity adjustment and bottom dead center stop via NC control unit - Hydraulic safety system against overpressure - Dual-speed operation system featuring rapid approach, bending, and fast return - CE-compliant multifunctional foot pedal and emergency stop system - Compact hydraulic power unit with HAWE or Rexroth components - Remote service support with Siemens, Pizzato, and Balluff electrical components - LEUZE safety system and learning mode - NC control unit with memory for up to 500 programs and 200 steps per program - Easy program upload and download via USB - Standard upper and lower die set - NC-controlled, motorized backgauge on X-axis (600 mm) - Programmable, linear-guided backgauge system - 0.2 mm positioning accuracy - Motor-controlled Y-axis angle adjustment - Movable control panel - Linear-guided front support arms - Lower die centering and clamping bolts - Programmable precise backgauge retract function Optional Equipment - Motorized R-axis - Special bending dies - Special foot pedal system with dual hand and foot operation - DSP or FIESSLER safety systems - Extended backgauge distance - Additional backgauge fingers - Additional front support arms - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 60 tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/sec Rapid Descent Speed: 90 mm/sec Throat Depth: 320 mm Daylight (Lower – Upper Beam Gap): 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X Axis Motor: 0.75 kW Y Axis Motor: 0.37 kW Optional R Axis Motor: 0.25 kW Backgauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Lsdpfx Aozcmbfoh Tsac Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, daya: 3 kW (4,08 hp), gaya penekanan: 30 t, panjang langkah: 150 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 70 mm/dtk, kedalaman tenggorokan: 255 mm, panjang pelat penekan: 1.270 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, Standard Equipment Stroke: 150 mm Daylight (Ram Opening Height): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Frames: 1010 mm Machine Features - Dual-cylinder upper beam bending system - Steel frame construction providing high static and dynamic rigidity - Upper beam movement supported by fiber slide bushings - High-strength balance shaft and eccentric bearing system supporting parallelism - Mechanically limited stroke system inside cylinders with motor-controlled angle adjustment - Large opening and high stroke for different tooling options - Easy tonnage adjustment and bottom dead center stop via NC control - Hydraulic safety system against overpressure - Dual-speed operation system: free descent, bending, and fast return - Multi-function foot pedal with CE-compliant emergency stop - Top-mounted compact hydraulic power unit with HAWE or Rexroth components - Siemens, Pizzato, and Balluff electrical components - LEUZE safety system and learning mode - NC control unit with memory for 500 programs, 200 lines per program - Program transfer via USB - Standard top and bottom tool set - NC-controlled motorized X-axis backgauge (500 mm) - Linear guide backgauge system - Positioning accuracy: 0.2 mm - Motor-controlled Y-axis angle adjustment - Movable control panel - Linear guide front support arms - Bottom die centering bolts - Programmable precise backgauge retract function Optional Equipment - Motorized R axis - Special bending tools - Special pedal system with dual-hand + foot control - DSP or Fiessler safety systems - Extended backgauge travel - Additional backgauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 30 Ton Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Frames: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Fast Approach Speed: 70 mm/s Throat Depth: 255 mm Daylight (Ram Opening Height): 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X Axis Motor: 0.55 kW Y Axis Motor: 0.18 kW Optional R Axis Motor: 0.25 kW Backgauge Travel: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Ljdpfxezcl S Ne Ah Tjac Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Kondisi: baru, Tahun pembuatan: 2025, Condition: New Year of manufacture: 2025 Stock number: 080091 Delivery time: Prompt, subject to prior sale Country of origin: Turkey Price: €51,120 Leasing rate: €966.17 In stock: 1 unit Pressing force: 60 tons Bending length: 2,550 mm Axes: Y1 / Y2 and X axis Stroke: 160 mm Distance between uprights: 2,150 mm Throat depth: 250 mm Installation height: 350 mm Laedpfowva Igox Ah Toc Drive system: Hydraulic Rapid traverse Y-axis: 120 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 70 mm/s Backgauge travel X-axis: 620 mm (with optional R-axis) Backgauge speed X-axis: 250 mm/s Table height: 813 mm Table width: 104 mm Oil tank: 100 l Motor power: 5.5 kW Length: 3,250 mm Width: 1,200 mm Height: 2,350 mm Weight: 4,250 kg 3 axes (Y1, Y2, and X axis) CNC CONTROL DT-10 - 10" 2D graphic display - Intuitive touch screen operation (simple drawing of bending contour with finger) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of the flat length for sheet metal blanks - Graphical product and tool memory - Correction function - USB ports for backup and program transfer - PC software allows programs to be created on a PC and transferred to the machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning system in the table Intermediate adapters for top tool clamping Top tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground Fiessler AKAS laser safety system mounted on upper beam Sheet support arms Side and rear safety guards Compliance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH (Sample photo shows model PBF 30200) ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to series production of standardized models with no compromise on quality or precision OPTIONS: CNC-controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM import and simulation software (STEP, IGES, and DXF file import) WE HAVE OVER 600 REFERENCES!

Tahun pembuatan: 2009, Kondisi: bekas, Data Teknis Panjang Pemrosesan maks. [mm]: 7.200 Dimensi [mm]: 9.000 x 2.000 x 2.700 Berat [kg]: 3.500 Tekanan Operasi Pneumatik [bar]: 6 Akurasi Posisi [mm/1000mm]: ± 0,1 mm Sudut Rotasi maksimum sumbu A [°]: 180 Kapasitas Spindel Kerja [KW]: 7,5 pada 12.000 min⁻¹ Kecepatan maksimum Spindel Kerja [min⁻¹]: 24.000 Peralatan: Panjang Alat maks. [mm]: 160 Diameter Alat maksimal pada panjang maksimum [mm]: 50 Pada panjang maksimum [mm]: 120 Mounting Tool: SK 30 Laodoynkkuepfx Ah Toc Koneksi Listrik: Tegangan/Frekuensi Nominal [V/Hz]: 400/50 Jumlah Fase/Konduktor Netral/Tanah: 3/N/PE Konsumsi Arus Nominal [A]: 35

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 16 h, Mesin press bahan baku Dibeli untuk mengepress karton, namun akhirnya tidak digunakan! Oleh karena itu, mesin press dalam kondisi seperti baru. Lasdszdrf Rjpfx Ah Toc Di bawah pada dokumen telah saya lampirkan faktur asli.

Kondisi: bekas, Dalam paket ini termasuk: 1 x cross beam sepanjang 3.600 mm (kuning) 2 x pin pengaman Untuk sistem ini tersedia sekitar 170 upright frames dan 800 cross beam. Silakan hubungi kami untuk informasi lebih lanjut. Produsen: Jungheinrich Kondisi: bekas, kondisi baik Kedalaman rak: 1.100 mm Panjang cross beam: 3.600 mm Kapasitas beban per level: 3.200 kg Aksesori seperti, misalnya: - Penahan lantai - Penghubung - Label peringatan beban - Pelindung tabrakan - Pagar pembatas - Grating - Wire mesh belakang - Batang pendalaman - Pagar batas dan banyak lagi... Silakan tanyakan langsung ke kami! Syarat & Ketentuan Penjualan & Pengiriman (B2B) - Harga & Logistik: Semua harga adalah netto ex lokasi. Pengiriman ekspres dengan armada sendiri dapat dibicarakan secara individual. - Status Penawaran: Semua penawaran tidak mengikat. Penjualan sementara secara tegas dicadangkan. - Retensi Kepemilikan: Barang tetap menjadi milik kami sepenuhnya sampai pembayaran lunas (larangan pengalihan dan pengolahan barang). Lasdpfx Ahjyu Rbae Tsc - Garansi: Penjualan eksklusif hanya untuk pelaku usaha (§ 14 BGB Jerman). Untuk barang bekas & grade II, klaim cacat barang tidak berlaku. Untuk barang baru berlaku garansi pabrik sesuai ketentuan.

Kondisi: baru, Tahun pembuatan: 2025, AL-KO POWER UNIT® 300 P-BP 30-50 Suction connection: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 6,000 m³/h Rated air flow rate: 5,089 m³/h Vacuum: 2,587 Pa Lodpfxoh D If Hj Ah Teac Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquette diameter: 50 mm Weight: 1,570 kg The machine is brand new in STOCK - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2025, AL-KO POWER UNIT® 250 P-BP Laedjcdr E Aspfx Ah Tsc Suction connection: 250 mm Rated motor output: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4,900 m³/h Rated air flow: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Arriving at warehouse 54634 Bitburg Subject to prior sale

Kondisi: baru, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Lease rate: €1,451.90 Pressing force: 160 t Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm Installation height: 430 mm Drive concept: Hydraulic Rapid traverse Y axis: 160 mm/s Working speed Y axis: 10 mm/s Return speed Y axis: 140 mm/s Backgauge travel X axis: 620 mm Backgauge speed X axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Ljdpfx Ahewird He Teac Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2, and X axis) CNC CONTROL DT-10 - 2D graphics display 10” - Intuitive touch-screen operation (easy drawing of the bending contour with your finger) - User-friendly conversational programming - Automatic calculation of bending sequence - Automatic calculation of developed length for sheet metal blank - Graphical product and tool memory - Correction features - USB ports for backup and program transfer - PC software for programming at the PC, then uploading to the machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning system Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, sectionalized, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), sectionalized, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil fill included Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Economical model due to serial production of standardized models without compromise on quality and precision OPTION: CNC-controlled R-axis (adjustment range in X = 500 mm) DBend: 3D CAD/CAM import and simulation software (import of STEP, IGES, and DXF files) WE HAVE OVER 600 REFERENCES!

Kondisi: baru, Tahun pembuatan: 2026, daya: 15 kW (20,39 hp), gaya penekanan: 175 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 130 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 3.700 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB B175-3700 CNC Hydraulic Press Brake is engineered for precise and repeatable sheet metal bending operations, offering 175 tons of bending force and a bending length of 3700 mm. Standard Features - Stroke: 260 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm Lodpfezb Inksx Ah Toac - Bending Length: 3700 mm - Distance Between Frames: 3200 mm - ESA S830 CNC Control Unit - 10” 2D touch screen - Manual bending sequence and collision control - Automatic crowning calculation - Angle measurement and correction - 2D drawing function - 2 USB ports - Offline software CT-BEND Servo Motorized Backgauge - X axis: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R axis: 250 mm - Hardened ball screw - Linear guide system - Optional X axis: 1000 mm Tool System - 2 rear backgauge fingers - European standard Promecam quick-release tool clamping system - CRONOSSTECH proprietary narrow lower beam - Eurostamp ES1260 upper tool - Eurostamp ES2067 lower tool - Amada-compatible tooling system Standard Equipment - B Series open frame design - GIVI linear scales - LED lighting - VDE electrical cabinet - Schneider or Siemens electrical components - HAWE hydraulic block - Eckerle pump - Siemens drive - Single pedal system - Energy-saving Standby function - 2 adjustable front support arms Optional Features - CT-BEND X+R servo motorized backgauge - AKAS II front safety laser system - PLC safety module - Rear light safety curtains - Delem DA53Tx CNC control unit - CNC controlled motorized crowning system - X axis extension to 1000 mm Technical Specifications - Bending Force: 175 Ton - Bending Length: 3700 mm - Distance Between Frames: 3200 mm - Stroke: 260 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm - Table Height: 955 mm - Machine Length: 5300 mm - Machine Width: 2430 mm - Machine Height: 2990 mm - Approach Speed: 180 mm/s - Return Speed: 130 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Weight: 10,500 kg - Main Motor: 15 kW - X Axis Speed: 300 mm/s - R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey 🇹🇷

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 04.522, panjang total: 7.820 mm, lebar total: 2.550 mm, tinggi total: 2.670 mm,

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Vollständiges "Bag-in-Bag"-Formiersystem, vormals eingesetzt zur Herstellung von Multipackungen von Chips. Laedpeyvac Aofx Ah Toc Das System besteht aus: 1 x Einfülltrichter mit Stufen/Gerüst. 1 x Comek s.r.l. Zufuhr-Schwanenhals-/Z-Förderband. 1 x Comek s.r.l. / Propema VPB 400 vertikale Form-, Füll- und Verschließmaschine. Seriennummer – 0516. Baujahr – 2014. Schweißbacken: 380 mm horizontal & 620 mm vertikal. Folienbreite – bis 810 mm. 1 x Markem Imaje SmartDate X65 128 mm Thermotransferdrucker. Seriennummern – GP21062420 & GJ21063019. Baujahr – 2021. 1 x Flash Etikettierer (nie benutzt/war für die Produkte des Verkäufers nicht erforderlich). 1 x Lochstanze (3 mm), um die Multipackbeutel vor dem Verpacken in Großkartons zu entlüften. 1 x Comek s.r.l. Abführ-Schrägförderband. Gurtbreite – 400 mm. Förderbandlänge – 1.800 mm. 1 x Lazy Susan / drehbarer Packtisch aus Edelstahl, Durchmesser 1,2 m. Höhe – 750 mm (Füße höhenverstellbar). Das System wurde zur Produktion von Multipack-Großbeuteln mit 3 verschiedenen Chipsgeschmacksrichtungen verwendet. Leistung – bis zu 18 Packungen/Minute. Stellfläche – 7,3 m lang x 2,7 m breit x 3,5 m hoch (vom Einlauf-Förderband bis zur Lazy Susan).

Kondisi: hampir baru (bekas), de Lajdjzaq Rxjpfx Ah Tjc

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 220 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 110 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 6.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB B220-6100 CNC Hydraulic Press Brake is engineered for precise, powerful, and repeatable bending of long sheet metal components, featuring a bending force of 220 tons and a bending length of 6100 mm. It is ideally suited for heavy industry, steel construction, energy, machinery manufacturing, and metalworking applications. The machine offers high efficiency, equipped with the ESA S630 CNC control unit, servo-motorized backgauge system, European-style tool clamping system, robust frame construction, and professional-grade components. Standard Features - Stroke: 260 mm - Daylight Opening (Open Height): 465 mm - Throat Depth: 410 mm - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - ESA S630 CNC Control Unit - 10” 2D touchscreen graphic display - Manual bend sequence and collision control calculation - Angle correction calculation - Angle measurement and correction - 2D drawing capability - 2 USB ports - Offline software - CT-BEND Servo Motorized X-Axis Backgauge - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Positioning accuracy: ±0.05 mm - Manual R-axis travel: 250 mm - Heavy-duty steel frame (body) - Hardened ball screw - Hardened linear guides - Optional X-axis travel: up to 1000 mm Tool Clamping and Backgauge Systems - 2 flat-type, 3-stage backgauge fingers - Manual Z-axis movement - European-style quick-release Promecam upper toolholder - CRONOSSTECH special narrow lower beam - Standard upper die ES1260, H: 67 mm, 85°, R: 0.8 mm - Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm - Amada-compatible tooling system Other Standard Equipment - B-series open frame design - Black plexiglass safety guards - Single foot pedal system - GIVI linear scales - Upper beam LED lighting - VDE electrical cabinet - Schneider or Siemens electrical components - Hoerbiger / HAWE hydraulic block - Eckerle pump - Siemens drive - Energy-saving standby function - 2 standard sliding front support arms Optional Features - AKAS II front safety laser system + PLC + rear light curtains - Delem DA53Tx 15” CNC control unit - Delem DA58Tx 18.5” CNC control unit - CNC-controlled motorized crowning system - X-axis extension up to 1000 mm - Additional front support arms - Additional backgauge fingers - Special bending dies Lsdpfxszbyvto Ah Teac Technical Specifications - Bending Force: 220 Tons - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 260 mm - Daylight Opening: 465 mm - Throat Depth: 410 mm - Table Height: 1060 mm - Machine Length: 7560 mm - Machine Width: 2570 mm - Machine Height: 3440 mm - Approach Speed: 150 mm/s - Return Speed: 110 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 20,000 kg - Main Motor Power: 22 kW - Backgauge X-Axis Speed: 300 mm/s - Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 4 kW (5,44 hp), gaya penekanan: 60 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 1.250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A60-1250 CNC Hydraulic Press Brake is designed for precise sheet metal bending operations with a bending force of 60 tons and a bending length of 1250 mm. Thanks to features such as the ESA S630 CNC control unit, servo motorized backgauge system, compact frame construction, and professional tooling equipment, it ensures high accuracy and efficiency for workshops, metalworking companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight Opening (Upper–Lower Ram Distance): 415 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D touchscreen graphic display Manual bending sequence & collision calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X Axis Backgauge System X axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R axis travel: 190 mm Steel body construction Hardened ball screw spindle Hardened linear guideway system Optional 1000 mm X axis travel Backgauge Fingers 2 pcs Flat type 3 steps (10 mm / 20 mm / 30 mm) Manual Z axis movement Anti-sag design for sheet support European Type Manual Promecam Upper Tool Holder E7 Quick tool change Safe usage Drop-prevention design for tools CRONOSSTECH Special Narrow Lower Beam 70 mm or 90 mm lower beam T-slot available upon request Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Max. capacity: 100 T/m Compatible with Amada Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Max. capacity: 80 T/m Compatible with Amada A Series Open Frame Design CRONOSSTECH premium open frame Wide field of vision Ergonomic design Professional appearance Additional Equipment Single pedal system (P2) GIVI linear encoders Upper beam LED lighting Electrical panel to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height-adjustable Scale measurement system Operator assistance Optional Features AKAS II Front Safety Laser System + PLC + Rear Light Barriers Finger protection system Laser-based safety system Enhanced operator safety CE compliance Maximum operating distance: 4.3 meters Technical Specifications Bending Force: 60 Tons Bending Length: 1250 mm Lsdpfxszbyu No Ah Tjac Distance Between Columns: 1100 mm Stroke: 210 mm Daylight Opening (Upper–Lower Ram Distance): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 2.600 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Uprights: 2150 mm ESA S830 CNC Control Unit (3-4 Axis) 10” 2D touchscreen graphic display Manual bend sequencing and collision control calculation Crowning correction calculation (Deflection compensation) Angle measurement and correction 2D drawing support 2 x USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel: 750 mm Speed: 250 mm/sec Accuracy: ±0.05 mm Manual R-axis travel: 250 mm Heavy-duty welded steel frame construction Hardened ball screw Hardened linear guideways Optional 1000 mm X-axis travel Back Gauge Fingers 2 pieces Flat type 3 positions (10 mm / 20 mm / 30 mm) Manual Z-axis adjustment Sheet sag prevention structure European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation User-friendly and time-saving design CRONOSSTECH Special Narrow Bottom Table Available as 70 mm or 90 mm wide T-slot can be machined for tooling requirements Standard Upper Punch ES1260 Ljdpszbyt Sefx Ah Teac Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Bottom Die ES2067 4-way V-openings (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass safety panels Wide operator view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Control panel wired to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens inverter Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruled measuring system Operator support Optional Features CT-BEND Servo Motorized X + R-Axis Back Gauge System Servo-motorized movement of X and R axes X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm CNC-Controlled Motorized Crowning System MVD wedge-type and G.E.C. motorized system Automatic calculation via CNC Faster adjustment times Higher bending accuracy Extended machine life AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Enhanced operator safety Quick detection and response time CE compliant Maximum protection range: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Uprights: 2150 mm Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/sec Pressing Speed: 10 mm/sec Return Speed: 135 mm/sec Oil Tank Capacity: 170 L Machine Weight: 6430 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/sec Back Gauge R-Axis Speed: 250 mm/sec This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2024, Condition: New Year of manufacture: 2024 Stock number: 8319 Delivery time: Immediate, subject to prior sale Country of origin: Turkey Price: €77,982 Leasing rate: €1,326.78 In stock: 1 Special price: €70,200 Pressing force: 200 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 210 mm Distance between uprights: 2550 mm Throat depth (side frame): 250 mm Installation height: 445 mm Drive system: Hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 7 mm/s Return speed Y-axis: 73 mm/s Backgauge travel X-axis: 620 mm (with optional R axis) Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Oil tank capacity: 150 l Motor power: 15 kW Length: 3750 mm Width: 1390 mm Height: 2500 mm Weight: 8160 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 10" 2D graphic display - Intuitive touch-screen operation (simple drawing of bending contours with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of sheet blank length - Graphical product and tool memory - Correction function - USB ports for backup and program export - PC software for creating and transferring programs via USB CNC-controlled backgauge with linear guide and ball screw CNC-CONTROLLED CROWNING DEVICE IN TABLE Adapters for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms Side and rear safety guards Compliant with CE regulations Filled with oil Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model through series production of standardized models without compromising quality and precision OPTION: Motorized crowning device adjustable via CNC control Incl. CNC-controlled R-axis (adjustment range X = 500 mm) Incl. DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) Lasdowiqp Iepfx Ah Tjc WE HAVE MORE THAN 600 REFERENCES!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 982xxxxx, Tahun pembuatan: 2019, jam operasional: 3.079 h, kapasitas angkut: 2.000 kg, tinggi angkat: 122 mm, jenis bahan bakar: listrik, panjang garpu: 1.150 mm, berat kosong: 697 kg, panjang total: 2.325 mm, jenis penggerak: Elektro, lebar konstruksi: 770 mm, Hand pallet truck Nomor rangka: 982xxxxx Titik berat muatan: 575 mm Lebar fork: 510 mm Transmisi: AC-impuls Kondisi: Direkondisi ulang tanpa garansi Kondisi teknis: sangat baik Lodpjzc Sayefx Ah Teac Jenis ban depan: Poliuretan Ukuran ban depan: Roller tunggal poliuretan Jenis ban belakang: Poliuretan Ukuran ban belakang: Roda penggerak poliuretan Volt aki: 24V Kapasitas aki: 250Ah Produsen aki: IBV Tipe aki: PzS Tahun pembuatan aki: 2023 Deskripsi: diservis, diperbaiki secara teknis dan visual, inspeksi UVV dilakukan, tanpa jaminan/tanggung jawab atas cacat Kontrol impuls, pengangkat awal, platform tetap, lebar antar garpu 510 mm, kemudi elektrik, pengangkatan dan penurunan dua sisi, baterai (03/2023) dengan Aquamatik, charger eksternal sesuai

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 100 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 40 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Uprights: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touch Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis travel Backgauge Fingers 2 units Flat type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Sheet sag prevention structure European Type Quick-Release Tool Clamping System (Promecam E7) Quick die change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Bottom Table 70 mm or 90 mm bottom table (bed) T-slot can be applied according to tools to be used Standard Upper Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Compatible with Amada Standard Lower Die ES2067 4-way V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Compatible with Amada Ljdpezbrf Tofx Ah Tjac B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic manifold Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Integrated measuring scale Provides operator support Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motor controlled X and R axis motion X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE compliant Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touch graphic display 2D drawing and 3D product simulation User-friendly interface 1 GB hard disk Automatic bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Tons Bending Length: 2100 mm Distance Between Uprights: 1600 mm Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 60 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is specifically designed for precise sheet metal bending applications, featuring a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D touch graphic display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support Laedpfx Ahezbrfaj Tsc 2 USB ports Offline programming software CRONOSSTECH Servo-driven X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Precision: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis Backgauge Fingers 2 pieces Flat type 3 steps (10 mm / 20 mm / 30 mm) Manual Z-axis movement Anti-sag design for large sheets European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot option available based on tooling Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Metre Compatible with Amada Standard Lower Tool ES2067 4-channel V grooves (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Maximum capacity: 80 Tons/Metre Compatible with Amada B Series Open Frame Design Black plexiglass safety panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE-compliant electrical panel Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruler-based measuring system Operator support Optional Features Servo-driven X + R-axis Backgauge System Servo-driven movement for X and R axes X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhanced operator safety CE conformity Max operating distance: 4.3 metres Delem DA53Tx CNC Control Unit (15” Touch) 15” color touch screen 2D part drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and diagnostics Technical Specifications Bending Force: 60 Tons Bending Length: 2100 mm Distance Between Columns: 1600 mm Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 270 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 3.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for heavy industry, steel construction, machinery manufacturing, and precision sheet metal forming applications, offering a bending force of 270 tons and a bending length of 3100 mm. Standard Features - Stroke: 260 mm - Daylight (Open Height Between Upper and Lower Beams): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axes) - 10” 2D Touch Graphic Screen - Manual bend sequence and collision control calculation - Automatic angle correction (crowning calculation) - Angle measurement and correction - 2D drawing support - 2 USB ports - Offline programming software - Servo Motorized X-Axis Backgauge System - X-axis travel: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Heavy-duty steel frame construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X-axis Backgauge Fingers - 2 units - Flat type - 3-stage (10 mm / 20 mm / 30 mm) - Manual Z-axis movement - Structure prevents sheet sagging European Type Quick Clamping System (Promecam Type) - Fast tool change - Secure locking system - User-friendly operation European Type Narrow Lower Table - 70 mm or 90 mm special lower table - T-slot can be applied depending on tooling requirement Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Maximum capacity: 100 Ton/Meter - Amada compatible Standard Lower Die ES2067 - 4-channel V openings (16-22-35-50 mm) - Die height: 60 mm - Die angle: 85° - Material: C45 - Maximum capacity: 80 Ton/Meter - Amada compatible B Series Open Cabin Design - Black plexiglass safety panels - Wide viewing area - Professional appearance - Ergonomic design Additional Equipment - Single pedal system (P2) - GIVI linear encoders - LED lighting on upper beam - Electrical panel in accordance with VDE standards - Electrical components by Schneider or Siemens - High-quality hydraulic block system - Eckerle hydraulic pump - Siemens main drive - Energy-saving standby function Front Support Arms - 2 standard sliding front support arms - Height adjustable - Metric ruler measurement system Optional Features - Servo Motorized X + R Axis Backgauge System - Servo controlled X-axis movement - X-axis travel: 750 mm - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Hardened linear guides and ball screw system - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - Motorized wedge system - Automatic calculation by CNC - Faster setup times - Higher bending accuracy - Longer machine lifespan - Front Safety Laser System + Rear Light Curtains - Laser-based finger protection - Improves operator safety - Fast detection and response - Maximum working distance: 4.3 meters Technical Specifications - Bending Force: 270 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Daylight: 465 mm - Throat Depth: 410 mm - Table Height: 960 mm - Machine Length: 4840 mm - Machine Width: 2500 mm - Machine Height: 3040 mm - Approach Speed: 150 mm/s - Return Speed: 120 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 12,300 kg Lajdpfx Ahezbrc So Toc - Main Motor Power: 22 kW - Backgauge X-Axis Speed: 300 mm/s - Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 4 kW (5,44 hp), gaya penekanan: 40 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 1.250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A40-1250 CNC Hydraulic Press Brake is engineered for precise sheet metal bending applications, offering 40 tons of bending force and a 1250 mm bending length. Equipped with the ESA S630 CNC control unit, servo-driven backgauge system, compact frame design, and professional tooling, it provides an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D Touchscreen Graphic Display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 x USB ports Offline programming software CRONOSS Servo Motorized X Axis Backgauge X axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R axis travel: 190 mm Steel frame construction Hardened ball screw spindle Linear guide system Optional 1000 mm X axis Backgauge Fingers Quantity: 2 Flat type 3-stage adjustable (10 mm / 20 mm / 30 mm) Manual Z axis movement European Style Manual Promecam Upper Tool Holder E7 Quick tool change Safe operation Design prevents die from falling CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table Optional T-slot upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Max capacity: 100 Ton/Metre Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Max capacity: 80 Ton/Metre A Series Open Front Panel Enclosure CRONOSS Premium open cabin Wide field of view Ergonomic design Professional appearance Single Pedal System (P2) Encoder Linear Scales Top Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-saving Standby Function 2 Sliding Front Support Arms Height adjustable Rule (scale) measurement system Operator support system Optional Features AKAS II Front Safety Laser System + Rear Light Barriers AKAS® II laser safety system Finger protection system Laser guard at punch height Enhances operator safety CE compliance Max working distance: 4.3 meters Technical Specifications Bending Force: 40 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Lajdpfx Ahjzbrcre Tjc Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 200 mm/dtk, kedalaman tenggorokan: 410 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending, featuring a bending capacity of 100 tons and a bending length of 3100 mm. Thanks to its ESA S830 CNC control unit, servo-driven backgauge system, high-rigidity frame construction, and professional tooling, it delivers high performance for metalworking and industrial production facilities. Standard Features - Stroke: 260 mm - Open height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axis) - 10” 2D touchscreen graphical display - Manual bend sequence and collision check calculation - Angle correction calculation (crowning) - Angle measurement and correction - 2D drawing support - 2 x USB ports - Offline programming software - CRONOSS Servo Motorized X-R Axis Backgauge System - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Robust steel frame - Hardened ball screw - Linear guide system - X-axis extendable up to 1000 mm (optional) - Backgauge Fingers: 2 units, straight type, 3 levels (10 mm / 20 mm / 30 mm) - Manual Z-axis adjustment - European Type Quick-Release Promecam Upper Tool Holder E7 - Quick tool change - Safe operation - Practical and ergonomic design - CRONOSS Special Narrow Bottom Table - 70 mm or 90 mm bottom table, depending on tonnage - T-slot available upon request - Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Max capacity: 100 Ton/Meter - Standard Lower Die ES2067 - 4-groove V-opening (16-22-35-50 mm) - Die angle: 85° - Die height: 60 mm - Material: C45 - Max capacity: 80 Ton/Meter - Series B Open Frame Cladding - CRONOSS premium open cabin - Black plexiglass safety panels - Wide field of vision - Ergonomic design - Single Pedal System (P2) - GIVI Linear Scales - LED Lighting - VDE Electrical Panel - Schneider or Siemens Electrical Components - Hoerbiger (HAWE) Hydraulic Block - Eckerle Hydraulic Pump - Siemens Drive - Energy saving standby function - 2 Standard Sliding Front Support Arms Laedpfxezbrb Is Ah Tjc - Height adjustable - Ruler measurement system - Operator support system Optional Features - CT-BEND Servo Motorized X+R Axis Backgauge System - Fully automatic movement in X and R axes - Manual movement in Z1 and Z2 axes - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - CRONOSS wedge system - G.E.C. motorized structure - Automatic calculation by CNC - More precise and homogeneous bending - No operator intervention required - AKAS FPSC Front Safety Laser System + Rear Light Curtain - CE compliant safety system - Finger protection function - Maximum working range: 4.3 meters Technical Specifications - Bending Force: 100 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 905 mm - Machine Length: 4670 mm - Machine Width: 2230 mm - Machine Height: 2950 mm - Approach Speed: 200 mm/s - Return Speed: 135 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Machine Weight: 6780 kg - Main Motor Power: 7.5 kW - Backgauge X Axis Speed: 300 mm/s - Backgauge R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 40 t, panjang langkah: 160 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 90 mm/dtk, kedalaman tenggorokan: 320 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB NC 40-1550 – 40 x 1550mm Ton NC Hydraulic Press Brake The HPB NC 40-1550 Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for precise sheet metal bending applications with a 40-ton bending force and a bending length of 1550 mm. Its compact design, NC-controlled axes, high-rigidity steel frame, and user-friendly control system offer an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features Lodpfx Aszbq U Hjh Toac - Stroke: 160 mm - Daylight Opening: 380 mm - Throat Depth: 320 mm - Bending Length: 1550 mm - Distance Between Columns: 1260 mm - Dual-cylinder top beam design - Steel frame and top beam with high static and dynamic rigidity - Adjustable top beam system with fiber glide supports - High-strength balancing shaft and eccentric bearing system to support parallelism - Motorized angle adjustment via in-cylinder mechanical stroke system - Wide stroke and daylight opening for versatile tooling - Easy tonnage and bottom dead point adjustment via NC control - Hydraulic safety system against overpressure - Dual-speed operation (free fall, bending, rapid return) - Multi-functional foot pedal with emergency stop complies with CE standards - Top-mounted hydraulic power unit with HAWE or REXROTH components - Electrical equipment by SIEMENS, PIZZATO, and BALLUFF - LEUZE safety system and learning mode - NC control unit with memory for 500 programs, 200 steps per program - USB data uploading and backup function - Standard upper and lower tooling set - NC controlled motorized X-axis backgauge system - 500 mm travel distance - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Front support arms with linear guides - Lower die centering and fixing bolts - Programmable precise return function Optional Features - Motorized R-axis - Special bending tools and dies - Special dual-hand + foot pedal control system - DSP or FIESSLER safety systems - Extended backgauge system - Additional backgauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications - Bending Force: 40 Ton - Bending Capacity*: 4 mm - Working Length: 1550 mm - Distance Between Columns: 1260 mm - Stroke: 160 mm - Bending Speed: 10 mm/s - Rapid Descent Speed: 90 mm/s - Throat Depth: 320 mm - Daylight Opening: 380 mm - Table Width: 100 mm - Lower Table Height: 845 mm - Main Motor Power: 5.5 kW - X-axis Motor Power: 0.75 kW - Y-axis Motor Power: 0.37 kW - R-axis Motor Power (Optional): 0.25 kW - Backgauge Travel: 600 mm - Oil Tank Capacity: 120 L - Machine Length: 2000 mm - Machine Width: 1600 mm - Machine Height: 2235 mm - Machine Weight: 3450 kg This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷