Beli Kraussmaffei Km125-700C1 bekas (225)

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Working area: 2800x1600 mm, swivel angle: 90°, parallel stroke: 150 mm, clamping force: 700 kN, connected load: 50 kW, including documentation. Ppsdpfsh Nm S Hjx Af Eeu

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Throughput capacity: 140–180 kg/h, screw diameter: 50–103 mm, screw length: 1300 mm, max. screw speed: 43 rpm, connected load: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, cylinder cooling unit, and screw temperature control. Ppjdpfx Ashz Dyaef Eou

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 60.000 h, Injection molding machine Krauss Maffei 50-180 CX Podpfx Ajv Tmzpsf Eopu Year 2006 Screw diameter 30 mm

Kondisi: siap digunakan (bekas), Mesin bekas Mesin injeksi plastik Produsen: Krauss Maffei Tipe: KM 80 C1 Tahun pembuatan: 2000 Hanya tersisa 1 unit di stok Tanpa waktu pengiriman, siap kirim segera Kunjungan dapat dilakukan dengan janji terlebih dahulu Mesin tidak lagi terhubung ke listrik / Tanpa sambungan air pendingin Mesin disimpan secara profesional Data teknis: Gaya penutup: 800 kN Ppsdpfou Ti Srsx Af Eju Pelat pemasangan (mm): 610×610 Jarak antar tie-bar (mm): Tinggi pemasangan cetakan (mm): 250 Jarak pelat (mm): 750 Kontrol: MC4 Bahasa tampilan layar: Jerman (tidak dapat diubah) Diameter sekrup unit injeksi (mm): 45 Tekanan injeksi (bar): 1878 Volume langkah (cm³): 275 Daya penggerak pompa (kW): 18,5 Daya pemanas (kW): 13 Isi oli (l): 270 Dimensi (m): 4,3 x 1,4 x 2,1 Bobot total: 3,2 ton Foto tambahan atas permintaan.

Kondisi: baik (bekas), Tahun pembuatan: 1995, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 40 mm, jarak antara tiang: 470 mm, Mesin injeksi Krauss Maffei tipe KM110-390 C1 untuk dijual. Mesin dalam kondisi sangat bersih, karena digunakan untuk produksi produk medis (lihat ruang bersih di foto). Perawatan dilakukan oleh Krauss Maffei hingga akhir. Mesin siap digunakan segera dan sudah dibongkar. Muat menggunakan forklift. - Sekitar 60.000 jam operasi - No. seri: 114104 - Tahun pembuatan: 1995 - Sekrup 40mm - Gaya penutupan 1100 kN Pedjxbar Hopfx Af Eopu - Jarak batang 470x470 mm - Koneksi core pull: 1 - Dimensi 4,5x1,5x2,2 meter - Berat 5.800 kg Silakan hubungi kapan saja jika ada pertanyaan.

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Ppsdpfxouiykde Af Eeu

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), 2079916 Ppodpfexx Uf Ajx Af Eju

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Flange diameter: 160 mm, clamping force: 1,600 kN, tie bar spacing: 520 mm x 520 mm, min. mold diameter: 350 mm, min. mold installation height: 300 mm, opening stroke: 650 mm, daylight between platens: 950 mm, ejector stroke: 150 mm. Screw diameter: 45 mm, injection pressure: 2,336 bar, shot volume: 318 cm³, nozzle radius: 15 mm, injection volume: 134 cm³, injection weight: 289 g. Machine dimensions (L/W/H): approx. 4,900 mm x 1,600 mm x 2,200 mm, weight: approx. 7,400 kg, operating hours: approx. 71,187 h. The machine has an unknown defect. Documentation available. On-site inspection possible. Ppedpfx Aouabq Tof Eeu

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Clamping force: 1500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions (X/Y): 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2336 bar. Machine dimensions (X/Y/Z): approx. 4700 mm / 1550 mm / 2200 mm, weight: approx. 7000 kg, control system: MC4. Includes Sepro handling system. Documentation available. On-site inspection possible. Ppjdjw Hthzspfx Af Eeu

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), A total of 9 partially dismantled injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines include robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation available. On-site inspection possible. Ppodpsugmx Aofx Af Eou

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 Podpfx Aeud H Dmjf Eopu - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system Pjdpeuggb Defx Af Ejpu  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 Ppsdpfxew U N Ixe Af Eeu - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 504212, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, jarak antara tiang: 900 mm, tekanan injeksi: 1.742 batang, tinggi pemasangan: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Distance between tie bars (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (retraction): 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Pjdpfxew Dy Rwj Af Eepu Operating voltage: 400 V Frequency: 50 Hz Total nominal current (Iₙ): 306 A Motor nominal current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery as well as assembly and commissioning can be arranged at extra cost upon request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Ppedjnh Rnuspfx Af Eju Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) - Optional: Installation and commissioning (Not included in price) With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Kondisi: bekas, Tahun pembuatan: 2006, Mesin injection moulding Krauss Maffei KM 800-4300 MX, tahun 2006 Ppedpfxjw Hwr Ds Af Eju Mesin dilengkapi sebagai berikut: - 5 kontrol kaskade hidrolik - Unit injeksi dengan 90 - Sistem kontrol MT5 - Sistem penanganan Krauss Maffei - 2 sabuk konveyor

Kondisi: bekas, Tahun pembuatan: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Pjdpjw Hwthofx Af Espu

Kondisi: bekas, Tahun pembuatan: 1999, Mesin injeksi plastik Krauss-Maffei 800/5700MC tahun produksi 1999 untuk dijual. Data teknis tersedia berdasarkan permintaan. Ppodjyg Hbgopfx Af Eeu

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Sekrup ø 90-36D, 45-30D, 45-36D Desain kompak, satu panel kontrol bersama, kapasitas sekitar 800 kg/jam Ppedpoyilyksfx Af Eou

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019,

Kondisi: baik (bekas), Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Psdpfx Afohvml Do Eopu Model: SPA 12/25 RP Type: Hydraulic Power Unit Complete plant closure. Large selection of mezzanine platforms, pallet racks, shelving units, and vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. You will find more new and used items in our shop! International shipping costs on request!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 105 mm, jarak antara tiang: 1.400 mm, volume langkah: 4.546 cm³, tekanan injeksi: 1.778 batang, berat injeksi: 4.137 g, injection_molding_machine_specs Pedpfx Aex Hz I Nef Ejpu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 68.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd/rev: 23 kN Podpfx Afsydp D Ee Ejpu Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated power of pump motor: 22 kW Installed heating capacity: 16 kW Number of barrel heating zones: 5 Oil filling capacity: 489 liters Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration/isolation elements - Krauss Maffei Robot LR 100 (X: 550 mm, Y: 1200 mm, Z: 2500 mm, C: 0-90°) Additional equipment: - 1 x Air valve - 2 x Core pulls - Robot interface according to Euromap 67