Beli Smicon Tekan Sabuk bekas (8.076)

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. Ijdpfxjfz A D No Akastg High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Kondisi: bekas, Tahun pembuatan: 1994, Tekanan 600 t Langkah 100 mm Jumlah langkah 45 /menit Jarak antar tiang 580 mm Tinggi pemasangan 460 mm Luas meja 550 x 620 mm Luas pelat tekan 550 x 430 mm Penyesuaian pelat tekan 50 mm Daya penggerak 15,0 kW Berat 13,5 t Isdpfxjw U Ekps Akajtg Ruang yang dibutuhkan (PxlxT) 1,5 x 2,45 x 2,75 m Jarak gaya nominal 1,7 mm Energi nominal 10,2 kJ dengan penggerak engkol, rem roda gila, kopling hidrolik, penyeimbangan rangka, kontrol dengan pengawasan mandiri

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 210 batang, berat kosong: 62 kg, tegangan masuk: 400 V, bahan bakar: listrik, masa garansi: 6 bulan, The Kärcher HD 10/21-4SX high-pressure cleaner is a highly efficient machine, suitable even for the toughest tasks in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly tested the machine for every function. All mechanical parts showing any signs of wear or damage were replaced with new components, including: ceramic pistons, seals, bearings, and all O-rings. This ensures a long, trouble-free operation without requiring additional investment in the machine in the future. Product advantages: - The device comes with brand new accessories, including a spray gun from German manufacturer R+M, a stainless steel lance, a steel-braided hose, and a nozzle. - The integrated hose reel with 20 m hose facilitates storage and daily handling. - Robust brass pump head with new ceramic pistons and seals guarantee long-lasting, reliable operation. - Thanks to its operating parameters of 210 bar and 1000 l/h, the machine can be effectively used for heavy-duty applications in construction, logistics, and agriculture. - Each unit we offer comes with individually taken photos – you purchase exactly the machine you see. Technical data: Model: HD 10/21-4SX Power supply: 3-phase – 400 V – 50 Hz Pump capacity (l/h): 1000 Ijdpjy S Uapjfx Akaotg Working pressure (bar): 210 Maximum pressure (bar): 250 Power input (kW): 8.0 Weight (kg): 62 Hose length (m): 20 Dimensions (L x W x H) (mm): 556 x 500 x 1090 Equipment: - INTEGRATED HOSE REEL - NEW R+M German-made spray gun - NEW 900 mm stainless steel lance - NEW reinforced 20 m steel-braided hose - NEW nozzle - Water filter and GEKA coupling included free of charge in the set.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 180 batang, berat kosong: 69 kg, tegangan masuk: 400 V, bahan bakar: listrik, masa garansi: 6 bulan, en Ijdoy S T E Rspfx Akaetg

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 210 batang, berat kosong: 62 kg, tegangan masuk: 400 V, bahan bakar: listrik, masa garansi: 6 bulan, The Kärcher HD 10/21-4S high-pressure cleaner is a highly efficient device, suitable even for the toughest jobs in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly checked the machine for full functionality. All mechanical components subject to wear and tear were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures a long and trouble-free operation, without the need for further investment in the machine in the future. Product advantages: The unit comes with brand-new accessories, including a spray gun from the renowned German brand R+M, a stainless steel lance, a reinforced hose with steel braiding, and a new nozzle. A robust brass pump head, new ceramic pistons, and new seals guarantee a long service life and dependable operation. Thanks to its performance parameters—210 bar pressure and 1000 l/h flow rate—the machine is ideal for heavy-duty tasks in construction, logistics, and agriculture. Each machine we offer features custom-made photos; you buy exactly the machine you see. Technical specifications: Model: HD 10/21-4S Power supply: 3-phase – 400 V – 50 Hz Isdpoy S Tcvsfx Akaetg Pump capacity (l/h): 1000 Working pressure (bar): 210 Maximum pressure (bar): 250 Power consumption (kW): 8.0 Weight (kg): 62 Hose length (m): 10 Dimensions (L x W x H) (mm): 556 x 500 x 1090 Equipment: NEW R+M German spray gun NEW 900 mm stainless steel spray lance NEW reinforced 10 m steel-braided hose NEW nozzle Water filter and GEKA connector included in the set free of charge.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Barang yang saya tawarkan adalah konveyor sabuk dengan panjang 15m dan lebar sabuk 0,6m. Terdapat kemungkinan pengiriman. Itedpev T H R Refx Akaog

Kondisi: baik (bekas), tegangan masuk: 400 V, frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 03/2027, jenis arus masuk: tiga fasa, Mesin pembagi dan pembulat adonan Record Automat Itsdpfxsrhfp Uo Akajg Mesin press roti untuk membagi dan membulatkan 30 bagian / 25 hingga 85 gram per potong dengan 3 piring pembulat Koneksi 400V, steker CEE 16A Dimensi: 690 x 580 x 1650 mm (P x L x T) Mesin bekas pakai Layanan pengiriman Banyak mesin press roti lainnya tersedia di stok!

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 230 batang, berat kosong: 66 kg, berat keseluruhan: 66 kg, masa garansi: 6 bulan, The Kärcher HD 1050 B high-pressure cleaner is a highly efficient unit, ideally suited for even the toughest jobs in large-scale installations. During the comprehensive inspection and refurbishment, our service team meticulously checked the machine for every function. All mechanical components showing signs of wear were replaced with new parts, including ceramic pistons, seals, bearings, and all O-rings. This guarantees a long, trouble-free operation with no further investment required in the future. Product advantages: - The machine includes brand-new accessories, such as a spray gun by German manufacturer R+M, stainless steel lance, steel-reinforced hose, and nozzle. - Robust brass pump head with new ceramic pistons and seals ensures long-term, trouble-free performance. - The powerful and efficient Honda GX 390 petrol engine provides excellent performance. - With working parameters of 230 bar and 930 l/h, the unit is suitable for heavy-duty applications in construction, logistics, and agriculture. - Each piece of equipment we offer comes with individually made photos—what you see is exactly what you get. Technical Data: Engine: Honda GX 390 petrol engine Pump Output [l/h]: 930 Operating Pressure [bar]: 230 Maximum Pressure [bar]: 250 Weight [kg]: 66 Dimensions (L x W x H) [mm]: 1044 x 549 x 662 Hose Length [m]: 10 Equipment: - NEW spray gun by German brand R+M - NEW 900mm stainless steel lance - NEW reinforced 10m steel-braided hose Isdpfey S Sh Dox Akaotg - NEW nozzle - Water filter and GEKA coupling included in the set free of charge.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 230 batang, berat kosong: 66 kg, bahan bakar: Super E10 95, masa garansi: 6 bulan, The Kärcher HD 1050 B high-pressure cleaner is a highly efficient unit, ideally suited for even the toughest jobs in large-scale installations. During the comprehensive inspection and refurbishment, our service team meticulously checked the machine for every function. All mechanical components showing signs of wear were replaced with new parts, including ceramic pistons, seals, bearings, and all O-rings. This guarantees a long, trouble-free operation with no further investment required in the future. Product advantages: - The machine includes brand-new accessories, such as a spray gun by German manufacturer R+M, stainless steel lance, steel-reinforced hose, and nozzle. - Robust brass pump head with new ceramic pistons and seals ensures long-term, trouble-free performance. - The powerful and efficient Honda GX 390 petrol engine provides excellent performance. Itsdpfx Aksy S Satsasg - With working parameters of 230 bar and 930 l/h, the unit is suitable for heavy-duty applications in construction, logistics, and agriculture. - Each piece of equipment we offer comes with individually made photos—what you see is exactly what you get. Technical Data: Engine: Honda GX 390 petrol engine Pump Output [l/h]: 930 Operating Pressure [bar]: 230 Maximum Pressure [bar]: 250 Weight [kg]: 66 Dimensions (L x W x H) [mm]: 1044 x 549 x 662 Hose Length [m]: 10 Equipment: - NEW spray gun by German brand R+M - NEW 900mm stainless steel lance - NEW reinforced 10m steel-braided hose - NEW nozzle - Water filter and GEKA coupling included in the set free of charge.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, The subject of my auction is a conveyor belt with a length of 15 m and a belt width of 0.8 m. Possibility of transport. Itodpfxjy S Nyds Akasg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, The subject of my auction is a conveyor belt with a length of 15 m and a belt width of 0.8 m. Iedpsy S Nx Tofx Akastg Possibility of transport.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, The subject of my auction is a conveyor belt with a length of 15 m and a belt width of 0.8 m. Itodpfxey S Nx Hs Akasg Possibility of transport.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, The subject of my auction is a conveyor belt with a length of 15 m and a belt width of 0.8 m. Itsdpfxey S Nxye Akasg Possibility of transport.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Barang yang saya lelang adalah konveyor sabuk dengan panjang sekitar 10m dan lebar sabuk 0,6m. Itodpfx Aey S Nxtokasg

Kondisi: siap digunakan (bekas), Objek lelang saya adalah konveyor sabuk dengan panjang sekitar 10 m dan lebar sabuk 0,3 m. Kemungkinan pengiriman tersedia. Isdpfjq Rdbvox Akaetg

Kondisi: bekas, Pabrikan: Kuderer Maschinenbau GmbH Model: AZ-2 Tahun: 1992 Itjdpey N Nw Rsfx Akaeg Mesin Gerinda Sabuk Dimensi keseluruhan: 1000 x 440 x 1080 mm Ukuran sabuk: 150 x 1440 mm Daya: 1,5 kW Penghisap Debu Dimensi keseluruhan: 560 x 560 x 690 mm

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slide H-frame design ensures balanced distribution of the high loads generated during pressing, guaranteeing stable and repeatable operation. Model CHP 500 is engineered for long-lasting and reliable performance in heavy-duty production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty conditions. The frame and load-bearing components are stress-relieved through vibration. Bronze Zr14 slide bearings ensure smooth load distribution and long-term precision throughout the ram’s travel. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame and carrier parts by vibration - Bronze Zr14 slide bearings - Welding applications approved for WPQR & WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Display of hydraulic unit oil temperature and system status on-screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 Type: Steel construction, 8-slide H-frame press Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 500 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Clearance: 100 mm Max. Clearance: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR & WPS certification accredited by TÜRK-AK according to EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 5800 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Isdpfox N T H Ajx Akastg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1000 H-Frame Single-Acting Hydraulic Press – 8 Guideways General Description Iedpfex N T Rbox Akaetg The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, providing maximum rigidity, precision, and long service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered to withstand the demanding conditions of heavy industry. The frame and main supporting structures are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Stress-relieved frame structure by vibration • Bronze Zr14 guide bushings • WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination indicator • Monitoring of hydraulic unit oil temperature and system status via display • Cooling system • Off-line filtration • Two-hand control system • Light curtain (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: EN ISO 15614-1/2017 certified by TÜRK-AK for WPQR and WPS Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table - Fast Approach Speed: 150 mm/sec Moving Table - Pressing Speed: 12 mm/sec Moving Table - Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Distance from Floor to Lower Table: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.200 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, RONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8 Way Guided General Description The CRONOSSTECH CHP Series H-Type Hydraulic Deep Drawing Presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. The 8-way guided H-frame structure ensures maximum rigidity, stability, and precision under high tonnage loads. The CHP 1200 model delivers reliable and long-lasting performance for demanding industrial production lines requiring high force. The frame is stress-relieved by vibration, ensuring even load distribution during pressing operations and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-way guided H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slideways - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination alert - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-way guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration-based stress relieving Welding Application: WPQR and WPS certified welding, accredited by TÜRK-AK and compliant with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø560 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 6100 mm Approximate Press Width: 3550 mm Approximate Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Isdpfjx N T Rujx Akajtg Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.500 t, panjang langkah: 1.000 mm, lebar meja: 1.800 mm, panjang meja: 2.600 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and metal spinning applications that require extremely high tonnage. The 8-slide H-frame design ensures maximum rigidity throughout the pressing operation, maintaining parallelism and squareness tolerances consistently over long strokes. The CHP 2500 model features large table dimensions, a multi-cylinder main pressing system, and a high-capacity hydraulic unit, making it suitable for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8-guided slides - Vibration stress-relieved welded frame - Bronze Zr14 slide bearings - Welded joints approved by WPQR and WPS in accordance with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touchscreen control panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 - Type: Steel construction, H-frame with 8-guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2500 Tons - Moving Table Size: 1800 × 2600 mm - Fixed Table Size: 1800 × 2600 mm - Parallelism Tolerance: 120 microns/m - Squareness Tolerance: 60 microns/m - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: By vibration - Weld Certification: WPQR and WPS certified by TÜRK-AK, per EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Rapid Down Speed (Moving Table): 150 mm/s - Forming Speed (Moving Table): 12 mm/s - Return Speed (Moving Table): 170 mm/s - Main Cylinder Bore: Ø565 mm – Ck45 (4 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6500 mm Itsdpfx Akox N T S Eoasg - Approx. Press Width: 3950 mm - Approx. Press Depth: 2600 mm - Bed Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Control Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications, featuring a robust steel construction. The 8-guide H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered for heavy-duty use. The frame and supporting components are stress-relieved via vibration methods. The slide bearings use bronze Zr14 material, providing long-lasting and stable operation. Key Advantages - 8-guide H-frame structure - Stress-relieved steel construction via vibration - Welding procedures compliant with ISO standards - PLC control with touchscreen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved frame and support parts by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system and off-line filtration - Dual-hand operator control system - Light curtain safety barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Isdpfjx N Tx Ssx Akaetg Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Ton Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 600 mm Stress Relief: Vibratory stress relief Welding: EN ISO 15614-1/2017 certified by TÜRK-AK accreditation with WPQR and WPS approval (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height Above Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 600 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-guide H-frame body, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is engineered for applications requiring medium to high tonnage, with a focus on reliable performance and long service life. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial use. The frame and carrier components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth ram movement and long-term precision stability. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press body - Stress-relieved body and carrier parts via vibration - Bronze Zr14 slide bushings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically-controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS and SCHNEIDER electrical components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration Welding Application: TÜRK-AK WPQR and WPS certified welding (with EN ISO 15614-1/2017 welding application certificate, supervised by certified welding coordinators according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Iedpfx Akex N T D Ueaetg Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 150 H-Frame Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 guiding slides ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long-term use for medium tonnage applications. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty usage. The frame and supporting parts are stress-relieved through vibration. Bronze Zr14 guide bushings provide smooth load transfer and long-term stability. ⚙️ Standard Equipment • Steel construction, 8-slide guided H-frame press body • Stress-relieved frame and supporting parts by vibration Itedpsx N T Dzefx Akaog • Bronze Zr14 guide bushings • TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and production in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Two-hand control system • Light barrier (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relieving: Vibration stress relieving Welding Application: WPQR and WPS certified welding accredited by TÜRK-AK, in compliance with EN ISO 15614-1/2017, supervised by certified welding coordination engineers as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 100 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operational principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the entire stroke. The CHSP 300/100 model, with a 300-ton main ram and a 100-ton blankholder (pot) capacity, is designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved via vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Vibration stress-relieved frame - Bronze Zr14 guideway bearings - Welding applications approved by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” touch panel display (DELTA) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, H-frame body with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Tons - Capacity (Pot): 100 Tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Pot): 300 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 900 mm - Weld Stress Relief: Vibratory stress relieving - Welding Application: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017; applications audited by certified "welding coordination engineers" in accordance with EN ISO 14731) - Max. Working Pressure: 250 Bar Isdpfx Akex N Uhbeastg - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/s - Moving Table Drawing Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Pot Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Pot Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 4400 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 21 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, masa garansi: 24 bulan, Excentric press is a type of mechanical press that operates with a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability due to their rigid frame structures. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, die protection, and operator safety. With its monoblock frame, 8-guided ram system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance suited for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety device - Controlled, user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain - Low maintenance requirement thanks to automatic lubrication infrastructure Applications - Punching / cutting / die forming operations - Series production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch & brake • Additional extra plate with T-slots • 8-guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload safety device Ijdpfx Aex N Sccjkaetg • Motorized ram adjustment mechanism • Light curtain safety system • Gear group in sealed oil reservoir • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Special dies as requested ✅ TECHNICAL DATA (CEHP-TB-200) Capacity: 200 Ton Table-ram distance: 500 mm Housing width: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimension: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.