Beli Unit Logika Kontrol Cnc bekas (47.531)

Kondisi: baru, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature and 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: Hnjdpfx Aasfnvwqezsr - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring via magnetic float switch - Dirt filter in the return line of the circulation and cooling water supply - Reversal switch for leak stop operation (usable up to system shutoff temperature) - Ball valve on supply and return - Automatic temperature-dependent system shutoff - Filling duration monitoring and Aquatimer - Adjustable pump post-run - Adjustable temperature alarm - Options: Interface cable - Control unit SBCmini, with relay for collective alarm, 230V, terminal mounted on rear of controller - Heating control SSR - Control panel IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater via upstream heating protection - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Maximum flow rate: 27 l/min Maximum delivery pressure: 4.5 bar Motor power: 0.5 kW Design: submersible pump / peripheral impeller *Dimensions/Weight/Colors Dimensions L/W/H: 600 mm x 240 mm x 493 mm (excluding connectors) Weight: approx. 43 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: G1/2" female Cooling water: G3/8" female *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in offers or order confirmations.

Kondisi: baru, *Technical Specification: -Air-cooled, 25.5 kW rated at +10°C supply temperature at an ambient temperature of +32°C -Temperature range supply: +5°C to +30°C (Optional lower temperatures down to -5°C possible) -Air volume: 8,000 m³/h -Max. air inlet temperature: +30°C -Optional heating capacity up to 24 kW *Pumps: -Delivery rate up to 150 l/min -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -Unladen weight: approx. 480 kg -Process medium connection: DN 32 internal thread *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -SBC-T control and regulation unit -Display for setpoint and actual value, alarm indicator -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve in accordance with DIN EN 378 -Power control -Frost protection monitoring -Flow monitoring -Grill cover over condenser -Oil sump heating -Drain facility -Level monitoring via float magnetic switch -Installed dirt trap in return line of process medium -Bypass valve between supply and return as pump protection, factory set -High and low pressure limiter according to DIN EN 378 -Stainless steel tank, capacity: 80 litres, open system, fully insulated -Self-supporting housing with castors, mobile Hsdpjg Ewwrofx Aazenr -System for indoor installation -Control cabinet IP 54 Other performance classes available on request. Visit our homepage for more details. *This unit complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requirements deviating from the standard are shown in quotations or order confirmations.

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats included. PC control system type ICOS OPEN CNC with IMAWOP software. Work tables configured as console tables (No. 8 consoles, table width 1400 mm). Console table with LED/strip lighting. Automatic tool change system (magazine capacity – 18 slots). Useful working area (X-Y-Z): 4000 x 2100 x 300 mm. Useful working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. 2 working areas. Vacuum pump / capacity: 140 m³/h. Chip conveyor. With separate electrical and control cabinet. Total connected load: 32 kW. Hnsdpfxehu U Nxo Aazjr Working units (Upper): - No. 21 independent vertical drilling spindles (4 x 1.2 kW) - No. 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edgebanding unit, edge banding aggregate (hot melt glue) VT 100 - Edgebanding material (rolls), thickness (min/max): 0.4 / 3 mm - Edgeband magazine for rolls (No. 2 compartments) OPTIONS: - Saw unit, max diameter 200 mm - Combination unit (flush milling and profile scraper) - Drilling head (with No. 4 horizontal drilling spindles)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control unit: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area (X - Y - Z) for edgebanding (mm): 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - mm 1200 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity: 140 m3/h) Safety enclosure for the working head, safety foot mats Chip conveyor belt No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool stations No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit - edgebander (hot melt glue) VT 50 Edge magazine for rolls (compartment no. 6) OPTIONALS: No. 1 adapter unit for saw, fixed at 90 degrees, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraping No. 1 adapter unit, horizontal drilling and milling head (cross head), 4 horizontal spindles Hnsdpefbmqtsfx Aazor

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axes (5 Axes with FLEX 5) Portal machine (mobile in X-axis) Hodpfx Asw Dc Nisazenr Control Powertouch (PC85), woodWOP software Work head safety enclosure Clamping table with K-Table model consoles Console support arms (qty) 8, Clamping table dimensions (mm) 1340 Automatic positioning of consoles (X-axis) LED indicators show the programmed position of vacuum cups (Y-axis) Workpiece clamp, Automatic tool change system – POWERCLAMP Carousel tool changer – magazine positions (tool stations) 18 Max. working area (X-Y-Z) mm 4000 x 1550 x 60 Max. working area (X-Y-Z) in edge-banding mode mm 4000 x 1500 x 60 Work area – Vacuum pump (capacity in m³/h) 100/140 Chip conveyor With separate electrical and control cabinet Total connection load (52 A) WORKING UNITS (TOP): No. 17 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 on X-axis + 2 on Y-axis) Drilling head motor power (kW) 2.2 No. 1 Vertical main spindle (milling unit) HSK 63 (kW 15) Edge-banding unit Power Edge (Y-axis), edge-banding aggregate (hot-melt adhesive + pre-melter) Roll material (edge banding) thickness (min/max) mm 0.4 – 3 Edge band magazine for rolls (compartment position no. 1) Pre-trimming station (cutting unit) No. 1 Traverse unit (4 horizontal drilling spindles) No. 1 Circular saw unit (diameter mm 125) Combination unit (flush trimming – profile scraper knife)

Kondisi: sangat baik (bekas), 4-axis CNC MACHINING CENTER for milling, drilling, cutting, and edge banding. Swan-neck machine – safety tread mats in front CNC control system Type PowerControl PC 85 (Software: WoodWop) 10 supports/consoles (1340 mm) LEDs indicate the programmed vacuum pod positions (Y-axis) Hsdpfsh Ucn Rjx Aazjnr Automatic tool change system (rotary changer, 18 positions) Usable working area (X - Y - Z): 6175 x 1550 x 60 mm Usable working area for edge banding (X - Y - Z): 6000 x 1475 x 60 mm 2 working zones – 2 vacuum pumps (capacity: 100 m³/h) Chip conveyor for efficient waste removal from the working process Total connected load: 27 kW Working units (top) - 17 independent vertical drilling spindles (2.2 kW) - 4 independent horizontal drilling spindles - 1 vertical electrospindle HSK F63 (main spindle 11 kW) - 1 grooving saw aggregate (0°-90°), diameter 125 mm Edge banding unit: Power Edge (Y-axis), glue application aggregate (hot-melt glue + pre-melter) Edging material (rolls) thickness (min/max): 0.4 – 3 mm Edge roll magazine (2 positions)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Hsdpetixpujfx Aazjnr Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Hedpfow A Ruqox Aazjnr Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Hnsdpfx Asq Nmutjazer Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) in edge banding (mm): 3100 x 1925 x 60 No. 6 clamping table with consoles (number of consoles) – mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety tread mats No. 1 vertical main spindle (milling units) HSK F63 (18 kW) Automatic tool change system (rotary tool changer) with 18 tool positions No. 14 independent vertical drilling spindles (2 × 1.2 kW) Cross-unit with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – application head (hot melt glue) VT 100 No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Tahun pembuatan: 2000, Kondisi: baik (bekas), 0107058 Cooling capacity: 1,100 W at +6°C Cooling capacity: 1,270 kcal/h at +6°C Maximum temperature: 44°C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Hnsdpfx Aajhri Ahszor Weight: 80 kg

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), 24 V, 100 VA, max. 7 bar Hnodpfx Aaslqwz Tezsr

Kondisi: bekas, CNC cycle-controlled lathe HARRISON Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose size: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed range (Step 1): 15-275 rpm Spindle speed range (Step 2): 35-795 rpm Spindle speed range (Step 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 V, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC – language in French (France) - Automatic gearbox range switching in 3 steps (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various scaling factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolpost size B with 2 holders - 1 live center - 1 quick-release drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged work area safety doors Hnsdpfxsh Hvk Aj Aazjr - Chip tray with coolant device under the machine bed - Control cabinet attached to the machine - RS 232 interface Required floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Tersedia 5 unit alat tempering merek Wittmann untuk dijual, harga tercantum untuk 1 unit. Media: Air Suhu operasi: maks. 90°C Hedpfoy In Dyex Aazenr Daya pemanas: 9 kW Daya pendingin: 25 kW

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), The device is available for sale: Hsdpfx Aencdwyoazsnr It has low operating hours and is in full working order. For technical details, please refer to the type plate. A complete operating manual is, of course, included with the device.

Kondisi: bekas, CNC control unit in operator panel / machine operator terminal Hnsdpfxelb I D To Aazor CNC path control FANUC Model A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions (W x H x D): 600 x 260 x 350 mm Weight: approx. 40 kg Originates from a GILDEMEISTER CNC lathe. From stock, functionality not tested, ideal for use as a spare parts donor.

Kondisi: bekas, CNC control unit, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Hodpfxsflrtxj Aazsnr Rack with 20 module slots – 12 modules installed Installed modules: 1 pc. 0.651.406-19.3 UNI Universal Interface 1 pc. 0.650.847-56.1 O32 Output Card 2 pcs. 0.651.708-57.3 I32 Input Card 1 pc. 0.652.138-36.1 APC 1 pc. 0.651.928-25.3 LAB Position Control 1 pc. 0.651.400-22.3 1 pc. 0.860.204-59.1 B32 1 pc. 0.652.128-35.0 RE4 1 pc. 0.651.269-26.0 ITY Serial Interface 1 pc. 0.651.974-23.2 ABS Termination Card 1 pc. 0.651.298-18.3 CPU Central Processor Unit Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, BIHLER P-CNC 3E control unit for BIHLER GRM 80E, consisting of: Control cabinet complete with SIEMENS SIMODRIVE Hjdetqdb Repfx Aazsnr SIEMENS motor 1PH6137-4NB 40-Z

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2-017-95-2630, Spindle motor untuk mesin CNC Weeke BOF dan BAZ. - Tersedia 7 pcs (dari jumlah tersebut 2 pcs dengan sumbu C); Hodpfjxnbmfjx Aazsnr - 12000 - 24000 Rpm; - 16kW - HSK 63

Kondisi: baru, Pressure Controllers (Πιεσοστάτες) RT-116 017-520366 / RT200 017-5237 / RT5A (AMMONIA) 017-504666 / RT112 017-519166 Hnjdpoum Rlbsfx Aazsr

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), CNC control system FANUC FANUC 15TF Complete control system with X and Z axis drives Hodpfxjgqucpo Aazsnr for CNC lathe.

Tahun pembuatan: 1989, Kondisi: baik (bekas), Complete Fanuc CNC control system, year 1989 Type: 0-Mate T. Housed in cabinet. Hnodpfx Ash Iz Disazsr

Tahun pembuatan: 2016, Kondisi: Pembawa suku cadang rusak (bekas), nomor mesin/kendaraan: 00050, de Hsdpfxohgr Ihs Aazenr

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 00069, de Hodpfxshgfnbe Aazonr

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2310-028, de Hnsdpfjhgg Rrjx Aazsr

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3 kg, panjang total: 500 mm, lebar total: 500 mm, tinggi total: 200 mm, tegangan masuk: 24 V, arus masuk: 4 A, jenis arus masuk: Arus searah (DC), dijual ̶1̶.̶ FANUC A13B-0202-B002, panel 15 inci 2. Unit Kontrol Mandiri FANUC - A02B-0323-B804 dengan 4 opsi: A20B-8101-0742 (FSSB-3) A20B-8101-0050 (Master CN1) Hnedpfxowq Dpdo Aazjr A20B-8101-0770 (ETHERNET CD38R) A20B-8101-0770 (ETHERNET CD38R) ----- 3. Keyboard untuk FANUC - A02B-0323-C231 bisa dibeli terpisah