Beli Urban Mesin Las Kepala Ganda bekas (83.752)

Kondisi: bekas, Tahun pembuatan: 2007, Table diameter: 2500 mm Max. swing diameter over bed: 2700 mm Turning height: 2500 mm Control: Siemens 840D CNC Max. workpiece weight: 30 t Ncodpfx Aaoy Dvlwj Ust Workpiece diameter: 2500 mm Crossrail travel (increments of 100 mm): 1200 mm Ram stroke: 1500 mm Ram cross-section: 250 x 250 mm Travel speed: 8 m/min Max. vertical feed: 6000 mm/min Max. cross feed: 8000 mm/min Table speed: 180 rpm Tool change time: 1 min Cutting speed: 140 m/min Cutting depth: 14 mm Main drive power: 100 kW Machine weight: approx. 47 t Footprint: approx. 12.5 x 8.0 x 6.7 m Equipment/Accessories: - Crossrail adjustable in 100 mm increments incl. locking mechanism - 2 rams with cross-section 250 x 250 mm; stroke 1500 mm - Both rams traversable over center (each 100 mm, i.e. both ballscrews offset from each other with collision protection) - ZF gearbox for main drive AC 100 kW / S1 Siemens, speed range 0–180 rpm - 2 tool changers with 16 stations each - Max. tool weight 50 kg; max. 800 kg in tool changer - 2 Renishaw touch probes with zero-point detection - Renishaw probe for workpiece measurement

Tahun pembuatan: 2023, Kondisi: bekas, Kami menawarkan mesin las ultrasonik Weber Ultrasonics Saphir Digital Manual Station bekas ini, tahun produksi 2023. Dengan mesin ini, sekitar 92.500 unit telah diproduksi. Sonotrode TR35Ti Nsdpfxeyimqwe Aa Uect Frekuensi: 35kHz Daya: 1000W 230V AC Sistem pengukur jalur: 26,88 mm Gaya minimum: 34 N Gaya maksimum: 500 N Low Level: 0 N Low Offset: 0 N Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Motor pisau: 2,2 kW, 230/400 V (*) 50 Hz Diameter pisau: 400 mm Diameter lubang pisau: 30 mm Kecepatan rotasi pisau: 57 m/detik (2720 rpm) Diameter luar saluran hisap: 85 mm Ncsdpfxjypb Ite Aa Uet Volume udara hisap yang dibutuhkan: 600 m³/jam Tekanan kerja: 6 / 8 Bar Konsumsi udara: 40 liter/menit Dimensi: 4220 mm x 1700 mm x 1500 H Berat: 580 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Las: FUSION 4H Unit pelepasan panel Modul pengefraisan pertama Q-MATIC 1 Koneksi serial antara mesin las dan pembersih Ncodexzzxbopfx Aa Ust Meja putar Mesin pembersih (model kedua) TRIMMER 4A Meja ekstraksi Modul pengefraisan kedua (INTEGRA Q2) Q-MATIC 2 Laptop pengawas lini

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Offered from insolvency is a DC TIG welding machine. Manufacturer: Migatronic Model: Pilot 2400 Year of manufacture: 2004 Machine no.: 04050694 Technical data: - 380 Volt - Welding range: 5–240 Amps - Welding output: - 240 Amps at 35% duty cycle - 170 Amps at 100% duty cycle - 2/4-stroke operation - Pulse function - HF ignition Nedpfx Aaefthy Ro Uect - Additional water cooling unit KG 2 No. 25730509, 220 Volt - 8 meter torch package - With ground cable — without pressure regulator — - Dimensions (approx.) in mm: 510 x 370 x 220

Kondisi: baru, Tahun pembuatan: 2018, Mesin Las Sudut Otomatis Produsen: Diez Tipe: AWS4535 Ncsdpfx Aajwriuus Ust Tahun Pembuatan: 2018 Tidak ada jam operasi! Frame pengelasan: 500 x 350 mm Lebar sabuk: 32 mm Dimensi luar: 170 x 130 x 135 cm

Kondisi: bekas, Resonance vibrating screen Screening surface: 5,500 x 1,300 mm Njdpfx Aastpgdyo Uect with base frame and electric drive

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Diameter x width: 750 x 1,500 mm Max. operating pressure: 300 bar Cutting force: 60 kN Weight: approx. 2,800 kg 76 chisels Ncedpfjqnvtzsx Aa Uot

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Screening area: approx. 1,200 x 2,400 mm Nodpfewm Nfcox Aa Uoct 5.5 kW electric motor with piping and water spray nozzles semi-mobile steel construction with bypass platform

Kondisi: bekas, Tahun pembuatan: 1987, b07ccce7cbedcde7 Ncsdpfxsyz Db Uj Aa Ujt

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Kami menawarkan mesin frais portal bekas HAAS GR-510 ini, tahun pembuatan 2015. Opsi Mesin: Penukar Alat: - Penukar alat karusel 20 kantong Sumbu ke-4 & ke-5: - Penggerak dan kabel untuk sumbu ke-4 Sistem Pengukuran: - Sistem probing intuitif nirkabel Manajemen Serpihan & Pendingin: - Pelindung serpihan dan pendingin - Sistem pendingin router gantry - Nosel pendingin yang dapat diprogram Kontrol Haas: - Modul deteksi kegagalan daya awal - Tapping kaku (Rigid Tapping) Opsi Produk: Ncjdpoyxx Azsfx Aa Uet - Ruang sumbu Z diperpanjang 6" - Meja baja - metrik Opsi Legacy: - Penjepit penukar alat model CT - Spindel 10.000 rpm, 15 hp - Tuas jog remote dengan LCD warna

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Pengoperasian pertama: 2002 Kontrol: Heidenhain iTNC530 Jam mesin: menyusul Nodpeyzz R Hjfx Aa Uect Sumbu X: sekitar 6.000 mm Sumbu Y: sekitar 3.500 mm Sumbu Z: sekitar 1.100 mm Sumbu A: Sumbu C: Kepala frais 2-sumbu Kecepatan spindle: maks. 14.000 rpm Perlengkapan tambahan - Penutup samping ganda Kondisi mesin Berfungsi penuh, kondisi sangat baik. Mesin masih terpasang daya dan siap pakai segera.

Kondisi: bekas, Tahun pembuatan: 1994, 1994 Bacci FCH8 Mesin Penyerut Dua Poros dengan 4 Kepala per Sisi (3 untuk penyerutan dan 1 untuk pengamplasan) Daya motor: Sisi kiri: Nodpfx Aox Hwmbja Ujct motor penyerut 1 = 7,5 KW motor penyerut 2 = 5,5 KW motor penyerut 3 = 3 KW (pada 1440 rpm) atau 5 KW (pada 2880 rpm) motor pengamplasan 4 = 3 KW Sisi kanan: motor penyerut 1 = 7,5 KW motor penyerut 2 = 5,5 KW motor penyerut 3 = 3 KW (pada 1440 rpm) atau 5 KW (pada 2880 rpm) motor pengamplasan 4 = 3 KW Unit kontrol: 4,8 + 4 KW Total tanpa unit kontrol: 38 atau 42 KW Total dengan unit kontrol: 46,8 atau 50,8 KW Dimensi keseluruhan: 7,20 x 2,40 x 1,90 m Berat perkiraan: 5 ton

Kondisi: bekas, Tahun pembuatan: 2003, bekas, kondisi baik Ncedjyclxpopfx Aa Ujt Mesin telah dibersihkan, dilumasi, sebagian direkondisi. Berbagai suku cadang aus telah diganti. Uji coba operasi dengan pengaturan. Merek: Rapid Tipe: DGS 200 Tahun pembuatan: 2003 No. Seri: 404 Telah diuji sesuai standar CE Motor: 2 x 2,2 kW Lebar potong: 4000 mm Kedalaman potong: 130 x 140 - 100 x 230 - 60 x 270 mm Tinggi potong maks.: 280 x 50 mm Diameter mata pisau maks.: 420 mm Dapat dimiringkan secara manual 45° Maju linier secara pneumatis Indikator digital untuk panjang potong 4 x penjepit pneumatis benda kerja - 2 x horizontal, 2 x vertikal Silinder horizontal: 2 Silinder vertikal: 2 Kebutuhan ruang sekitar 5100 mm x 1180 mm x 1280 mm Berat sekitar 800 kg Lokasi penyimpanan: 97447 Gerolzhofen, bebas muat, tanpa kemasan Penyerahan dalam kondisi seperti dilihat, tanpa garansi dan jaminan.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 30 t, DURENDUS 30 T Heated Press – Double-Column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was already built and delivered on behalf of a customer. We can manufacture this machine for you at short notice – gladly with individual options to suit your specific requirements. This is a hydraulic heating press with electrically heated platens and a manually operated sliding table, designed for pressing, laminating, and forming processes involving temperature. Base price: €42,000 net Options (upon request): The listed options are based on realized customer projects and allow precise adaptation of the machine to each specific application. The base machine is a functional standard version – in practice, it is typically expanded with additional equipment and configured project-specifically. ==== Technical Data + Information: ==== General Specifications * Design: Double-column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heated plates: 700 × 500 × 65 mm * Max. installation height: 800 mm * Table traverse: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-point linear guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump output: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Control & Operation * SIEMENS S7-1200 PLC with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand safety operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200°C * Temperature monitoring with sensors * Passive pressure-holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Dual-layer painting as per RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, compression molding Heated press, hydraulic press, double-column press, thermo press, laminating press, industrial press Nedsy H Dtzepfx Aa Usct Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Moreover, our presses exceed both Canadian and European safety requirements, as they fully comply with all points of the Brazilian national safety guideline NR 12, which builds upon these standards. Our key strength lies in custom machine building and press automation. We offer customized hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 2007, Tornos Deco Sigma 20 Mesin Bubut Sliding Head, Spindle Ganda, 6 Sumbu & 2 Sumbu C, Spindle 1 - Utama, Chuck Collet, Maks. 10.000 rpm, Diameter Benda Kerja Maksimal 20mm, Dilengkapi 6 Posisi Alat Bubut, 4 Posisi Milling/Bor Samping (2 Posisi Bertenaga), 4 Posisi End Mill semuanya Bertenaga, Spindle 2 - Sub, Chuck Collet, Maks. 10.000 rpm, Diameter Maksimal Part 20mm, Dilengkapi 5 Posisi Alat Bubut, 2 Posisi Milling/Bor Bertenaga, Penangkap & Chute Part, Kontrol CNC Fanuc Seri 31i, Barfeeder Tornos Robobar SBF-532, Panjang Bar Maksimal 3000mm, (820kg). No. Seri 8277 (2007). Negara Asal: Swiss. Nedpjy Idcfjfx Aa Usct

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1982, elumatec-doppelgehrungssaege-e200-2024 Nodey Hk Thjpfx Aa Uoct

Kondisi: bekas, Tahun pembuatan: 1995, Faceplate diameter: 4000 mm Swing diameter: 4300 mm Turning height: 1750 mm Cross slide travel: 1000 mm Table load capacity: 18 t Speed range: 1-92 rpm Control: Siemens Type 840 D Number of tool posts: 2 Ram dimensions: 250x250 mm Feed rate: 1-4000 mm/min Main drive motor: 55 kW Total power requirement: 85 kVA Nsdeyquyfepfx Aa Uect Machine weight approx.: 64 t Space requirements approx.: 8 x 5.8 x 8 m The machine was overhauled in 2007 The machine is currently set up for ring machining, but can be converted back for machining tall parts. Additional Information: Chip conveyor The technical data are provided by the manufacturer or the operator and are therefore non-binding for us. Interim sale reserved; exclusively our terms and conditions of business and sale apply. About us: - Over 400 own machines in stock - More than 15,000 m² warehouse area, crane capacity 70 t - More than 10,000 accessories for your workshop If you would like to sell machines, production lines or your business, please do not hesitate to contact us. Further offers can be found on our website. Inspections by arrangement are possible. We look forward to your visit. Your Markus Hirsch Team

Tahun pembuatan: 1970, Kondisi: bekas, Spot welding machine Manufacturer: Dalex Model: SF 16 Njdpfjk Tt Hfex Aa Usct Continuous output: 16 kVA at 50% duty cycle

Kondisi: baik (bekas), Tahun pembuatan: 1980, TIG welding machine Messer Griesheim GW 200, AC/DC, 400 volts Ncjdpfstd Hhdjx Aa Uet

Tahun pembuatan: 2004, Kondisi: bekas, Panjang berguna: 4200 mm Nodpfey Hifcox Aa Ujct Diameter mata: 500 mm

Tahun pembuatan: 2007, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2007036, Farros BSA 5185/600 Mesin Gerinda & Poles Kepala Dish (2007) Njdpfx Aoy Azb Uea Ujct Kepala penggerinda Kombi KS 1200 Diameter gerinda minimum 1.000 mm Penggerindaan internal dan eksternal Kepala gerinda dapat diputar dari -20º hingga +30º Kompresor udara dan sistem ekstraksi debu dipasang pada rangka dudukan skid

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: E555 Touchscreen, berat keseluruhan: 2.300 kg, panjang pemotongan (maks.): 6.000 mm, diameter mata gergaji: 550 mm, kecepatan rotasi (maks.): 2.800 rpm, RINCIAN TEKNIS Panjang potong (maks.): 6000 mm Diameter pisau: 550 mm Kecepatan putaran pisau: 2800 rpm Ncedpfxey Egahj Aa Ujt DETAIL MESIN Kontrol: E555 Layar Sentuh Pasokan udara tekan: 7 bar Dimensi & Berat Dimensi (P x L x T): 7500 x 1500 x 2000 mm Berat: 2.300 kg

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), lebar kerja: 620 mm, nomor mesin/kendaraan: SE 01510 A10, HP60/40 Heating Element Welding Machine by BRANSON Drive system is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Low operating hours (approx. 6,800 hrs). Usable heating element area: Width 600 mm x Depth 400 mm Max. workpiece dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. part height (top): 350 mm - Max. part height (bottom): 350 mm (Combinations of part heights possible, depending on contour) Max. process temperature for contact welding: 400°C. The machine’s modular frame design allows for easy modifications. Side doors and the front door in the welding area can be easily opened for quick changeovers. The automatic safety lift door ensures a high level of operator safety. Temperature controllers on the operating panel are equipped with actual/target displays. The operating terminal is a Siemens PLC control panel. Machine is controlled via Siemens PLC (S7-300 control system). Heating elements are equipped with temperature sensors for precise temperature control and safety shutdown in case of overheating. The pin systems in the tool clamping areas enable reproducible fixture positioning. Advantages of heating element welding technology: - Secure welding of workpieces with low or varying wall thicknesses is possible. - Low rejection rate due to dimensionally accurate and reproducible welds. - Precise timing, temperature control, and force dosing allow even sensitive parts to be welded. - Nearly all thermoplastics can be welded with this method. - Different types of plastics can be welded together (compatibility must be checked). Technical data: - Power supply: 3 x 400 V AC + N + PE - Power rating: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 (power lines) x 6 mm² each - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m Njdpfx Aoykvdloa Uect - Machine width with control panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (door open) Machine weight: approx. 2,200 kg

Tahun pembuatan: 2014, Kondisi: baru, Double grinding machine REMA DS 40/400 Ncodsgkrxcjpfx Aa Uot Motor: 3 kW plus four boxes of grinding wheels