Beli Weiler Lunet bekas (372)

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Matador VS2, tahun pembuatan 1992, chuck tiga rahang, Multifix, pelindung cipratan belakang, pelindung chuck elektrik. Mesin dalam kondisi baik dan siap pakai, dapat didemonstrasikan dalam keadaan terhubung listrik setelah perjanjian. Djdpsx Sqvgjfx Anzscl

Kondisi: bekas, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Mounting DIN 55022 size 5 Tailstock quill: 3 MT Quill travel 90.0 mm Speed range 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Dcedpfoxacirjx Anzjl Voltage 380 V Machine weight approx. 620 kg Dimensions (LxWxH) 1420 x 700 x 1200 mm From a vocational school - very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium precision turned parts Equipment: - Robust lead- and feed-screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with a large range of collets - Hinged chuck guard - Chuck key - MULTIFIX tool holder size A, with 3x new inserts - Sliding tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for facing and top slide - Pole-changeable drive motor - Machine base with cabinet door (storage compartment) - Chip splash guard (rear panel) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Data teknis: Jarak senter sekitar 500 mm Tinggi senter di atas alas: 125 mm 16 tingkat kecepatan putar Tingkat 1: dari 110 – 900 rpm Tingkat 2: dari 440 – 3600 rpm Kebutuhan ruang, Panjang x Lebar: 1,2 x 0,6 m Perkiraan berat sekitar: 400 kg Dcedpfezd Urmsx Anzsl

Kondisi: baik (bekas), Tahun pembuatan: 1998, Mesin Bubut CNC Weiler E30 Dimensi Lebar: 1200 mm Dimensi Kedalaman: 1800 mm Dimensi Tinggi: 1700 mm Berat Mesin: 1300 kg Diameter Spindel: 42 mm Kedalaman benda kerja di atas meja: 330 mm Dilengkapi dengan dudukan Multifix B Penyangga tetap (opsional), rentang penjepitan: 15-100 mm Penyangga bergerak (opsional), rentang penjepitan: 10-85 mm Collet dari 3-28 mm (dengan interval 0,5 mm) Sentrum dengan chuck MK3 Daya penggerak 100% / 60%: 9/11 kW Torsi maksimum pada spindel: 180 Nm Rentang kecepatan total: 1-4500 rpm Penggerak umpan: Penggerak umpan arus bolak-balik Rentang umpan longitudinal: 0-20 mm/putaran Kecepatan umpan transversal/planar: 10/7,5/5/3,5 m/menit Dcjdozr Uc Uepfx Anzel Diameter pin: 50 mm Langkah pin: 110 mm Kerucut internal pin: MK 3 Diameter ayun di atas meja: 160 mm Lebar meja: 240 mm Gerakan geser meja: 180 mm Panjang rel meja: 395 mm Penampang pahat bubut (tinggi/lebar): 20 x 20 mm Kepala spindel sesuai DIN 55027, ukuran 5 Diameter spindel pada bantalan depan: 70 mm Kerucut internal spindel utama: MK 5 Benda kerja: Rentang ulir metrik: 0,1 - 400 mm Rentang ulir inci: G/1" 1/4 - 56 Rentang ulir modul: 0,125 - 28 mm Rentang ulir DP: 1-224 G/" Jumlah ulir maksimum: 50

Kondisi: bekas, Tahun pembuatan: 1992, Weiler mesin bubut poros utama dan tarikan Tipe / Model: Condor B Kondisi: Bekas Tahun pembuatan: 1992 Data teknis Tinggi senter: 165 mm Jarak antara senter: 750 mm Diameter ayun di atas alas: 330 mm Diameter ayun di atas eretan: 180 mm - 185 mm Spindel utama dan penggerak Kisaran putaran: 22 - 2800 rpm Lubang spindel: 40 mm Kepala spindel: DIN 55027 / Ukuran 5 (dengan pengunci bayonet) Daya penggerak: 3,2 kW Pemajuan dan pemotongan ulir Dcedpfxszfhgts Anzjl Pemajuan memanjang: 0,016 - 0,8 mm/putaran Pitch ulir metrik: 0,18 - 28 mm Senter belakang Tirus dalam pinol: MK 3 Jarak gerak pinol: 110 mm Dimensi (P/L/T) kira-kira: 2000 mm x 860 mm x 1600 mm Bobot kira-kira: 1.100 kg Biaya pengiriman oleh ekspedisi hingga tepi jalan dapat dilihat di keranjang belanja atau dalam penawaran individual untuk produk permintaan.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Dcedpfxjthd Shs Anzjl Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 165 mm, lebar di tengah: 750 mm, gores kuas bulu: 85 mm, panjang total: 1.800 mm, lebar total: 1.300 mm, kecepatan spindel (maks.): 2.800 rpm, kecepatan spindel (min.): 22 rpm, berat keseluruhan: 1.100 kg, Kepada Bapak/Ibu yang terhormat, Kami menawarkan untuk dijual mesin bubut dengan panduan dan spindel tarik tipe Weiler Condor B yang telah direkondisi secara menyeluruh! Model ini sangat menonjol karena kemudahan pengoperasiannya serta rasio yang sangat baik antara ruang yang dibutuhkan dan tinggi/jarak antar pusat. Condor B berada dalam kisaran ukuran antara Weiler Praktikant dan Weiler Commodor, sehingga merupakan mesin serbaguna yang ideal untuk setiap bengkel. Mesin ini akan direkondisi secara menyeluruh di bengkel kami, sehingga secara teknis dan visual akan tampak seperti baru! Berikut adalah pekerjaan yang akan dilakukan selama proses rekondisi: - Pembersihan menyeluruh - Pengecatan ulang - Perbaikan rel panduan - Penggantian semua pelumas - Penggantian semua komponen standar seperti pegangan, tombol, sekrup, dll. - Penggantian semua komponen yang aus seperti sabuk, rantai, wiper, dll. - Penggantian semua komponen elektronik seperti kontaktor, trafo, sakelar, dll. - Dokumentasi dengan protokol pengujian, daftar suku cadang, dan protokol geometri Ketersediaan: sesuai permintaan Tinggi antar pusat: 165mm Jarak antar pusat: 750mm Diameter lubang spindel: Ø 40mm Dudukan tirus kepala tetap: MK3 Dudukan chuck: kerucut pendek DIN55027 Uk.5 dengan pengunci bayonet Langkah pinol: 85mm Kecepatan putaran: 22-2800 RPM Jenis ulir yang mungkin: Metrik, inci, modul, diametral pitch Pitch ulir metrik: 0,18 - 28mm Rem spindel: dapat diaktifkan Tegangan: 400V Dimensi: sekitar 1,80x1,30x0,9m (PxLxT) Berat: sekitar 1100kg Peralatan dan aksesori tambahan: pelindung chuck (BARU), sistem pendingin, 2x tombol darurat, pelindung panduan dan spindel tarik (opsional), tampilan digital K+C BARU (opsional), manual pengoperasian, dokumen teknis, sesuai permintaan, banyak lagi... Janji layanan kami kepada Anda: - Kami adalah bengkel bersertifikat di bidang teknik mesin - Semua mesin akan diperiksa di bengkel, minimal. Dsdpoztf A Uofx Anzjcl - Semua pelumas dan komponen yang mungkin aus akan diganti terlebih dahulu - Sesuai permintaan, kami akan merekondisi mesin yang Anda pilih secara menyeluruh atau sebagian - Sesuai permintaan, kami akan mengecat ulang mesin yang Anda pilih dengan warna yang Anda inginkan - Sesuai permintaan, Anda dapat memesan aksesori tambahan seperti peralatan, dll. secara langsung - Sesuai permintaan, kami dapat memasang aksesori tambahan seperti peralatan keselamatan, dll. - Kami akan dengan senang hati mengurus pengiriman dan/atau pemasangan

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm Dsdpfx Asxu Hlasnzecl >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Accessories and Features: >> 3-axis Heidenhain digital readout >> 1 pc new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets (partially duplicate sizes) >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre Safety Features: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is fully functional, of course. For safety, the lead and feed screws are equipped with protective covers. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor dalam kondisi kerja yang baik. Spesifikasi: Diameter putar di atas bed: 380mm Diameter putar di atas dudukan silang: 190mm Jarak antara senter: 1000mm Lubang spindle utama: 56mm Kecepatan putar: 25-2000rpm Daya motor: 4kW Mesin dilengkapi dengan: Digital 3-sumbu Chuck 3 rahang dengan beberapa rahang Sistem pendingin Pemegang pahat Multifix dengan 4 dudukan Instalasi collet dengan collet Bedstop Dsdpfx Ajx Ngpdsnzjcl

Kondisi: bekas, Turning length 800 mm Turning diameter 280 mm Turning diameter over cross slide 150 mm Dsdjxacg Rjpfx Anzecl Spindle bore 42.0 mm Tailstock quill taper MK 3 Bed width 208 mm Speed range 42 – 2022 rpm Spindle mount DIN 55027/5 Quill stroke 90.0 mm Voltage 380 V Total power requirement 3.0 kW Machine weight approx. 750 kg Dimensions (L x W x H) 1800 x 800 x 1250 mm Due to its construction (design, performance, feeds, etc.), this machine can be successfully used both in training workshops as well as for toolmaking and repair shops. Equipment: - Heavy-duty conventional lead screw/feed shaft lathe - WMW 3-jaw chuck Ø 150 mm - Face plate 280 mm - MULTIFIX quick-change tool post with insert - Sliding tailstock - Chuck key - Machine base with storage compartment - Pole-change motor - Operating manual

Kondisi: bekas, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Spindle mount DIN 55022 size 5 Quill: 3 MT Quill travel 90.0 mm Spindle speed 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions L-W-H 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-precision turned parts Equipment: - Robust lead and feed screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - Collet chuck with a large assortment of collets - Chuck key - MULTIFIX tool holder A, with 3 new tool inserts - Movable tailstock Dcsdpfx Asxaccxjnzsl - Adjustable bed stop - Control panel, front left - Automatic longitudinal and cross feeds for facing and cross slide - Pole-changeable drive motor - Machine base with cabinet door (storage space) - Chip splash guard rear panel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm Dcjdpfxoyaimfj Anzjl • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm

Kondisi: baik (bekas), Tahun pembuatan: 1994, Mesin bubut kendali siklus Tipe mesin: Weiler E 35 Kontrol: Siemens 805 Tahun pembuatan: 1994 Tersedia: segera DATA TEKNIS Tinggi pusat: 200 mm Panjang pembubutan maks.: 950 mm Dcsdpfxjziy A Ie Anzel Diameter pembubutan: 410 mm Diameter pembubutan maks. di atas carriage: 200 mm Lubang spindle: 54 mm Rentang kecepatan putar: 20 - 3.000 rpm Senter putar: MK 4 Perjalanan sumbu Sumbu X: 230 mm Daya terpasang: 10 kW Berat mesin: 2.100 kg Fitur perlengkapan 46 collet 173 E DIN 6343

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 mesin bubut pandu dan ulir bekas Merek: Weiler Tipe: Commodor Tahun pembuatan: 1990 Data teknis: Tinggi antara pusat: 190 mm Diameter putaran di atas alas: 380 mm Dcsdpfxozutifs Anzol Diameter putaran di atas penyangga: 190 mm Jarak antara pusat: 1000 mm Lubang spindel: 56 mm Dudukan spindel: DIN 55027 ukuran 6 (A2-6) Kerucut spindel: MK 6 Diameter spindel pada bantalan depan: 90 mm Rentang kecepatan putar: 25 – 2000 putaran/menit Jumlah kecepatan putar: 18 tingkat Umpan longitudinal: 0,026 – 0,90 mm/putaran Umpan transversal: 0,013 – 0,45 mm/putaran Ulir metrik: 0,3 – 10 mm Ulir inci: 80 – 2,75 ulir/inci Langkah spindel: 150 mm Kerucut spindel: MK 4 Dimensi: Panjang: sekitar 230 cm Lebar: sekitar 110 cm Tinggi: sekitar 200 cm Berat: 1600-1700 kg Dilengkapi dengan tampilan digital Heidenhain

Kondisi: baik (bekas), Tahun pembuatan: 1989, 1 mesin bubut dan pembuat ulir bekas Merek: Weiler Dcjdpfjzuthhjx Anzol Tipe: Condor B Tahun Pembuatan: 1989 Data Teknis: Jarak antar pusat: 750 mm Tinggi antar pusat: 165 mm Diameter lubang spindel: 40 mm Kecepatan putar: 22 – 2800 RPM Kon dengan lubang tirus: MK 3 Daya penggerak: 1,6 / 3,2 kW Berat: 1040 kg Dimensi: 1.850 x 880 x 1.290 mm Dilengkapi dengan: Tampilan digital 3 sumbu Perangkat penjepit collet dengan tuas Pelindung chuck

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Dcsdpfx Aovivmyenzol Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: bekas, Tahun pembuatan: 2001, Rincian teknis: Diameter putar di atas tempat tidur: 410 mm Diameter putar di atas support datar: 200 mm Panjang putar: 950 mm Lebar tempat tidur: 330 mm Diameter putar di atas support: 410 mm Jangkauan support datar: 630 mm Tinggi senter: 200 mm Kontrol: Siemens/Weiler D2 Diameter spindle milling pada bantalan depan: 90 mm Lubang spindle: 54 mm Rentang kecepatan putar: 1 - 3000 rpm Kecepatan feeding: 0 - 20 mm/putaran Rapid traverse - longitudinal/plansupport: 10/5 m/menit Dcodszd Sg Ispfx Anzol Konektor tailstock MK: 4 Diameter pinol: 65 mm Stroke pinol: 120 mm Berat mesin sekitar: 2,1 ton Dimensi mesin (PxLxT) sekitar: 2,3 x 1,4 x 1,7 m E35 bukan mesin manual murni dan bukan juga CNC klasik, tetapi merupakan mesin hybrid: - Bekerja seperti pada mesin bubut konvensional - Siklus otomatis dengan sekali tekan tombol - Tidak perlu pemrograman yang rumit - Sangat cepat untuk satuan & produksi kecil - Cocok juga untuk operator tanpa pengetahuan CNC Weiler sendiri mendeskripsikan sebagai berikut: Komponen sederhana – seperti konvensional Komponen kompleks – seperti CNC, namun lebih mudah

Kondisi: sangat baik (bekas), Wilk Weiler 1109 Dodpfx Ajzlr Nrjnzscl Tinggi: 2100 mm Lebar: 1200 mm Panjang: 1800 mm Berat: 1800 kg Catu daya listrik: 400V 50Hz 3N Kapasitas: 22.000 kg/jam Daya total: 75 kW Sistem pengisian: Tidak ada sistem pengisian, opsi untuk menambahkan sistem pengisian kolom ke mesin Diameter corong: 279 mm Jenis wolf: Wolf standar Sistem pengumpanan adonan ke sekrup: Hopper pengumpan

Kondisi: bekas, Tahun pembuatan: 1999, panjang pembubutan: 1.000 mm, diameter pembubutan: 500 mm, lubang spindel: 80 mm, kecepatan spindel (maks.): 2.500 rpm, capacità 1000 x 570 mm foro mandrino 80 mm torretta Multifix controllo Siemens lunetta mandrino autocentrante a 3 griffe Rotas 315 mm Dsdsy E Hvvjpfx Anzscl

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, revolver bekas – penukar 6 posisi – untuk Weiler 260 Dcjdpfjzu Tf Tjx Anzel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, kecepatan spindel (maks.): 2.500 rpm, jarak pergerakan sumbu X: 340 mm, jarak gerak sumbu Z: 1.100 mm, berat keseluruhan: 3.800 kg, jumlah sumbu: 2, Horizontal lathe from 2007. This WEILER E55X1000 features a maximum turning diameter of 315 mm and a distance between centers of 1100 / 2100 mm. It is equipped with a Sauter 8-station tool system and a spindle speed range of 1–2500 rpm. If you are seeking a high-quality lathe, you should consider the WEILER E55X1000 we have for sale. Please contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Max. turning diameter: 315 mm • Max. torque: 1600 Nm • Tool system: Sauter 8-station turret • Number of tool stations: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of cross slides: 1 • Centre distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MT 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Max. tailstock travel: 1000 / 2000 mm • Continuous speed (S1): Gear stage I: 89 rpm / Gear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Rated current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: The ball screw in the Z-axis generates some noise, but dimensional accuracy is not affected. Additional equipment Dcsdpoy Em A Aefx Anzel • Extraction system Technical Specification Counter spindle: No Driven tools: No

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out in particular due to its stepless speed control, which makes working on the already highly user-friendly machine even easier. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine and its condition at our premises. Availability: on request Machine no.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20-3000 rpm, stepless Tailstock quill taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Threading options: Metric, Inch, Module, Diametral Pitch Metric thread pitch: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Dcodpoq H D U Eefx Anzol Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and additional accessories available on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can carry out a complete or partial overhaul of your chosen machine - Upon request, we repaint your machine in your desired colour - Upon request, you can directly order further accessories such as tools, etc. - Upon request, we can fit additional accessories such as safety features, etc. - We are happy to take care of shipping and/or installation.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Mesin bubut siklus Weiler E 50/1 1997 Data teknis: WEILER Tipe E 50 / 1 Tahun pembuatan 1997 Tinggi senter 280 mm Jarak antara senter 1000 mm Diameter ayun 500 mm Diameter putar di atas alas 570 mm Diameter putar di atas support 340 mm Dcjdpsymdw Ssfx Anzsl Kecepatan spindel 0 - 2500 rpm Chuck

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm Dsdpfjvtp Edex Anzjcl >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm Dcsdpfsu Aftgsx Anzel >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.