Beli Wmw Aw 350X315X120 bekas (1.787)

Kondisi: bekas, Technical details: Table length: 865 mm Table width: 780 mm Table height: 40 mm Height above floor: approx. 815 mm Machine weight approx.: 140 kg Required space approx.: 0.87 x 0.8 x 0.82 m Marking plate – spotting plate Marking plate with 3 legs * Nedpfx Aou Nkn Aolksla

Kondisi: bekas, Technical details: Table length: 500 mm Table width: 500 mm Table height: 100 mm Height above floor level: 100 mm Njdpfx Alju Nkp Tjksla Machine weight approx.: 52 kg Space requirement approx.: 500x500x100 mm

Kondisi: bekas, Technical details: Diameter: 250 mm Passage: Ø 80.0 mm Width: 80 mm Machine weight approx.: 18.0 kg Dimensions: Ø 250 x W: 112 mm Three-jaw lathe chuck made of steel Nlsdpfou Nla Hox Alkea Flange mount Ø 210 mm with 3 holes M12x44 Including 1 set with 3 jaws *

Kondisi: bekas, Technical details: Faceplate diameter: 318 mm Faceplate width: 56 mm Maximum through-hole: Ø 54 mm Weight: 17 kg Nsdpeu Nlgmjfx Alkola Dimensions: Ø 318 x W: 101 mm Technical features: - Clamping jaws: 4 pieces, manual adjustment - Clamping range: external = max. Ø 280 mm, internal = min. Ø 40 mm

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Nsdpfx Alsu N Ddwekjla Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Ukuran meja: 1000x750 atau pelat penjepit mm Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) - Pengoperasian dengan kaki dan tangan tersedia Nsdpfeu N Dfhex Alksla - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter termasuk.

Kondisi: bekas, en-Technische Details: Plate length: 7040 mm Plate width: 2230 mm Plate height: 330 mm Machine weight approx.: 12,800 kg per piece 2 cast steel plates available for sale. Surface finish: planed Nedpfx Aeu N Dl Islkjla T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28mm, and distance between T-slots: 305mm The plates are equipped for side clamping/connection. Through holes: 11 pieces, Ø 28mm, continuous, with counterbore Ø 600mm x 260mm, and 12 pieces, Ø 28mm, continuous, with counterbore Ø 114mm x 270mm. Our price is per plate.

Kondisi: bekas, Technical details: Plate length: 385 mm Plate width: 205 mm Plate thickness: 65 mm Njdou N D Hropfx Alkola 8 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9; b = 24.2; c = 9.8; h = 19.9 mm

Kondisi: bekas, Technical Details: Plate length: 255 mm Plate thickness: 65 mm 4 plates available T-slots according to DIN 650 for T-slot bolts according to DIN 508 Nledpfx Aleu N D Icskoa a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Kondisi: bekas, Technical Details: Diameter: 375 mm Passage: 140 mm Width: 95 mm Machine weight approx.: 65 kg Nljdpfou N Ezdox Alksa 3-jaw chuck with external jaws with flange mount, size Ø 375 x 20 mm; 2x adjustment bores Ø 24 x 15 mm, pitch circle Ø 173 mm; 3x clamping bolts Ø 26.5 x 60 mm, pitch circle Ø 174 mm Turning range min./max.: Ø 100 / Ø 310 mm Equipment: 1x chuck key

Kondisi: bekas, Technical details: Drilling capacity in steel (diameter): 22 mm Nljdpfxovxf Iro Alkja Throat depth: 205 mm Drilling stroke: 100 mm Spindle taper: MT2 Spindle speed: 2-step rpm Feed: manual mm/rev Max. distance spindle/table: 150 - 600 mm Base plate clamping surface: 350 x 400 mm Table clamping surface: 360 x 280 mm Table rotatable: 360° Table height adjustment: 450 mm with hand crank Column diameter: Ø 100 mm Control voltage: 380 V Total power requirement: 0.8 kW Machine weight approx.: 270 kg Machine dimensions (LxWxH): approx. 0.6 x 0.5 x 1.95 m Column drilling machine incl. machine vice. In stock.

Kondisi: bekas, Technical Details: Drilling capacity in steel (diameter): 13 mm Throat depth: 160 mm Drilling stroke: 60 mm Spindle taper: MT2 Spindle speed: 210 - 2,580 / 16 steps rpm Feed: manual mm/rev Table clamping surface: 200 x 185 mm (fixed) Nledpfjvgbdxex Alkja Max. distance spindle/table: 620 mm Table clamping surface: 260 x 265 mm (adjustable) Distance spindle/table max.: 160 - 460 mm Rotating table: yes ° Table adjustment: 300 mm (hand crank) Column diameter: approx. Ø 70 mm Total power requirement: 900 Watts Approx. machine weight: 90 kg Approx. machine dimensions (LxWxH): 0.6 x 0.31 x 1.7 m The machine is equipped with a RÖHM 1-13 drill chuck including chuck key. Right-hand spindle rotation. Small machine vice included *

Kondisi: bekas, en-001 Nodpfxsu N Dz Aj Alksla

Kondisi: bekas, Tahun pembuatan: 1957, Detail teknis: Kapasitas pengeboran pada baja (diameter): 20 mm Overhang: 220 mm Stroke pengeboran: 85 mm Jarak spindel/meja maks.: maks. 260 mm Nodpfx Alsu Id D Uskola Rentang kecepatan: sabuk V rpm Taper spindel MK: 2 Ukuran bidang penjepitan meja: 220 x 280 mm Ukuran bidang penjepitan base plate: 225 x 280 mm Jarak pusat spindel ke base plate: maks. 380 mm Kebutuhan daya total: 0,33 kW Berat mesin sekitar: 125 kg Dimensi P x L x T: 0,8 x 0,4 x 0,8 m Meja dapat diputar 380 V dengan kabel sambungan 2500 mm

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Tailstock quill stroke: 180 mm Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. Nedpfeu Ix Hdsx Alksla It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Swing diameter over support: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Nsdpfxsu Ix Hqj Alkola Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, en1-Technical Details: Travel path – Y-axis: Saddle on beam: 200 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Quill stroke: 80 mm Nlsdpfxeu Ndb As Alkoa Speed range: 90 - 900 / 5 steps rpm Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table mounting surface: Attachment area: 760 x 200 mm Table clamping area: 630 x 200 mm Max. table load: 100 kg X-travel: table longitudinal: 320 mm Z-travel: table vertical: 350 mm Table swivels +/-: left/right 30° each Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table feed: Infinitely variable 14 - 71 mm/min Total power requirement: 4.0 kW Weight approx.: 1,200 kg Machine dimensions (LxWxH) approx.: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital readout for X and Y axes. Swiveling work spindle. Feed operates via variator gearbox. Swiveling table. Spindle rotational speed via 3-stage gear and 2-stage electric selection. Coolant system. Milling beam extendable by approx. 350 mm. The machine vice is recommended but not included in the scope of delivery. Can be purchased as an optional extra. *

Kondisi: bekas, Technical details: Table length: 1000 mm Table width: 1000 mm Approx. machine weight: 0.531 t Approx. space requirement: 1.0 x 1.0 x 0.8 m Nodpfeu Nkkkex Alkola The scribing plate is mounted on a sturdy welded construction made of 60 mm steel angle.

Kondisi: bekas, Technical details: Plate length: 660 mm Plate width: 450 mm Plate height: 70 mm Pass-through opening in the table: Ø 115 mm Machine weight approx.: 111 kg Required space approx.: 660x450x70 mm Njdpfeu Nkpysx Alksla Pass-through hole: 115 mm T-slots: according to DIN 650 and 508 - a = 22 mm - b = 38 mm - h = 40 mm - c = 17 mm

Kondisi: bekas, en001 Nljdeu Nurfopfx Alksa

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Nedpfx Alsu N A Uuokola Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Nljdpfxju N A U Ie Alksa

Kondisi: bekas, Technical details: Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Approx. machine weight: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Ram plate removed from a PYE 160S press - with central through-hole Ø 40 mm - with 6x pitch circle holes Ø 16 mm, pitch circle Ø 160 mm - diagonal T-slot according to DIN 650 (a = 19 mm; h = 25 mm; b = 38 mm; c = 16 mm) Nsdou N Dhiopfx Alksla - with support plate underneath = spacing approx. 410 mm

Kondisi: bekas, Technical details: Plate length: 1100 mm Plate width: 700 mm Njdou N Dyropfx Alkola Plate height: 85 mm Approx. machine weight: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48; c=24mm; Center distance 76mm

Kondisi: bekas, Technical details: Faceplate diameter: 800 mm Width: 140 mm Nlsdsu N E Anopfx Alksa Weight: 330 + 50 kg This faceplate does not include clamping claws. Clamping is done using the corresponding clamping plate Ø 790 x 26 mm. The clamping slots, each 300 mm in length, are arranged radially. T-slots according to DIN 650: a = 22 mm; h = 37 mm; b = 40 mm; c = 17 mm Flange mounting: Mounting surface external Ø 410 mm and internal Ø 195 mm 6x clamping bolts on a bolt circle Ø 235 mm Clamping plate: 4x through holes Ø 20.5 mm arranged on a bolt circle Ø 630 mm Various clamping holes M20 / M16 and M12 arranged in different positions Equipment: 4 pieces of clamping screws M20 with clamping straps