Beli Bihler Mesin Pelubang Dan Pembengkok bekas (78.482)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Ausstattung: 1 Schlitteneinzug rechts Itedpetzlzasfx Afiof 1 Zweipunkt-Exzenterpresse 250 kN 4 Normalschlittenaggregate 1 Schmalschlittenaggregat 1 Steuerwelle Arbeitsbereich: Drahtstärkebereich: 0,5 - 5,0 mm Bandbreite: max. 40 mm Einzugslänge: max. 320 mm Leistung: max. 135/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1967, de-001 Itodpfx Ael D N Hvjfief

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan Itjdpfx Ajr D N Eqsfisf 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: bekas, Tahun pembuatan: 2007, Dijual mesin punch Amada EMK 3610NT termasuk unit pemuat MP300. Itedpow Hww Hjfx Afiof Mesin ingin kami jual lengkap beserta tool dan mesin pengasah Wilson X-Sharp. Tool standar tercantum dalam daftar terlampir. Dapat saya kirimkan melalui email.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1979, bihler-grm50-info Iodpfx Afotvar Ioijtf

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Perlengkapan: 1 unit kabin peredam suara BIHLER 1 unit penarik penjepit kanan 1 unit mesin press eksentrik 70 kN 4 unit agregat seluncur normal 1 unit agregat seluncur sempit Ruang kerja: Diameter kawat: 0,5 - 3,5 mm Lebar pita: hingga 32 mm Itsdpfx Afsfzr Aqsief Panjang penarikan: hingga 170 mm Kapasitas: hingga 250/min.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Equipment: - 1 right-hand gripper feed - 1 two-point eccentric press, 250 kN - 5 slide units Itedovuzvdjpfx Afiof Working area: - Wire diameter range: 1.5 – 5.0 mm - Strip width: max. 50 mm - Feed length: max. 200 mm - Output: max. 450 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Load capacity: max. 40 kg Itodpji T Ir Asfx Afisf Reel plate diameter: 650 mm Coil outer diameter: max. 600 mm Coil inner diameter: 170 - 310 mm Coil width: max. 200 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Equipment: - 1 gripper feed unit, right side - 1 eccentric press, 70 kN - 3 narrow slide units Itedetmtzkopfx Afisf - 1 camshaft Working Range: Wire diameter range: 0.5 - 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Capacity: up to 400 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Equipment: Iodpfetmty Nsx Afistf 1 right-side gripper feed 1 eccentric press, 70 kN 3 narrow slide units 1 control shaft Working range: Wire diameter range: 0.5 - 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Performance: up to 400 cycles/min

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Equipment: - 1 right-side gripper feed - 1 double-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit Iedpfx Aetqf Iqjfiotf - 1 control shaft Working range: Wire diameter range: 0.5 - 4.0 mm Strip width: up to 60 mm Feed length: up to 270 mm Performance: up to 350 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Equipment: 1 BIHLER P-CNC 200 Control System 1 BIHLER Soundproof Enclosure 2 Right-Side Gripper Feed Units 1 Left-Side Gripper Feed Unit 4 Wide Slide Units (Welding Press Slides) 1 BIHLER B 1000 Welding Unit Working Range: Wire diameter range: 0.5 – 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Isdpfxswxarqo Afijtf Output: max. 400 cycles/min

Kondisi: baik (bekas), BIHLER GRM100 Stamping and Forming Machine, Made in Germany. Machine originally refurbished by Bihler in 2010, upgraded with servomotor, pump, new wiring, new control system, etc. Equipped with 4 forming slides and 18-ton press station. Right-hand gripper feeder with straightening unit. Maximum strip width: 100 mm. Maximum wire diameter: 10 mm. Standard feed length: up to 250 mm. Maximum operating speed: approx. 135 strokes per minute. Servomotor. Touchscreen control. Air clutch. Itjdpfepm H Haox Afijf Weight: approx. 6,000 kg. Power supply: 400/480 V, 50 Hz. Additional high-speed presses from Bruderer, Schaal, and Mabu in stock. Also ideal butt-welding machines available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 20 t, lebar kerja: 1.250 mm, jarak lintasan sumbu Y: 1.270 mm, ketebalan lembaran (maks.): 6 mm, panjang kerja: 1.250 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mesin dari bengkel pelatihan dengan hanya 3 jam waktu punching! Penyerahan penawaran mewajibkan pengambilan tepat waktu hingga 21.11.2025! DETAIL TEKNIS Tekanan tekan: 200 kN Ketebalan plat maksimum: 6 mm Isdpfxsxn Rvis Afiotf Stasiun revolver: 51 Stasiun auto-indeks: 4 Gerakan sumbu Y: 1.270 mm Area kerja: 1.250 x 1.250 mm DETAIL MESIN Sistem kontrol: AMNC-F Berat: 12.500 kg Data listrik Arus penuh: 55 A Arus hubung singkat: 25 kA Daya terpasang: 19 kVA Tegangan nominal: 200 V Frekuensi: 50 Hz Jam operasional Waktu punching: 3 jam Waktu menyala: 895 jam PERLENGKAPAN Perangkat lunak offline Solution Pack Blank School AP100 2D CAD Production Designer 3D VPSS3i Blank Paket alat senilai 8.000 EUR

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, SPECIAL CLEARANCE SALE!! Itjdpfxovxr Tzo Afief PivaPunch Punching Center PCC 125-e – in excellent condition with few operating hours. System consisting of decoiler car, uncoiler, straightening machine, loop pit with hydraulic transfer tables, punching press, scrap removal conveyor, outfeed belt, blank rotation unit, stacking system, and Siemens system controller. Technical data: Coil weight: 10,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,600 mm Material thickness: 0.5 – 1.5 mm Material width: 60 – 1,250 mm Tensile strength: max. 400 N/mm² Product dimensions: max. 2,500 mm long For detailed technical specifications, please see the PDF.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2011, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 35114, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 4.000 rpm, model controller: HEIDENHAIN TNC 124, 1 Itjdpfoym Nuvsx Afijf

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, nomor mesin/kendaraan: 611080402022, Perlengkapan: pengumpan batang, TECHNICAL DETAILS Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminum/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulic system Tank capacity: 80 l Pump displacement: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75%, 24 h Electrical Data Supply voltage: 400 V ±5 % Supply type: three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Itedpfx Aeyzya Tsfijf Machine weight: 1,850 kg EQUIPMENT BLM bar loader BLM CARM 7 Bar loader weight: 650 kg Conveyor belt Note: The machine is sold without protective guard.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1235, produsen pengendali: Germany Beckhoff, lebar kerja: 1.200 mm, Sudut pembengkokan (maks.): 90 °, ketebalan pelat baja (maks.): 4 mm, tebal plat aluminium (maks.): 6 mm, panjang total: 1.685 mm, lebar total: 1.262 mm, jenis arus masuk: tiga fasa, panjang benda kerja (maks.): 1.200 mm, tinggi benda kerja (maks.): 430 mm, daya nominal (semu): 3 kVA, jumlah spindel: 6, lebar bukaan: 400 mm, - 德国Beckhoff系统，闭环控制，高弯曲精度。 - 意大利GIVI MEASURE高精度光栅尺。 - 机身经热处理后具有高强度。 - 无需更换折弯模具。 - 压料器根据板材长度可自动调节长度。 - 多边全自动连续折弯。 - 自动编程软件可完成全部工艺流程。 - 自动检测并优化工艺过程。 Itedpfewfwkqex Afisf - 全伺服电机控制，速度快且节能。 - 压力可自动调控。

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1032, masa garansi: 12 bulan, lebar total: 2.300 mm, panjang total: 1.685 mm, Sudut pembengkokan (maks.): 90 °, lebar kerja: 3.200 mm, panjang benda kerja (maks.): 3.200 mm, tinggi benda kerja (maks.): 370 mm, daya nominal (semu): 4 kVA, jumlah spindel: 4, tebal plat aluminium (maks.): 6 mm, ketebalan pelat baja (maks.): 4 mm, jenis arus masuk: tiga fasa, - Komplettbearbeitung des Maschinenrahmens - Doppelzylinder-Elektrohydraulische Synchronsteuerung Isdpfx Aowfwkwjfijtf - Verschiedene elektrohydraulische CNC-Systeme wählbar - Mechanischer Ausgleich - Segmentiertes Werkzeug - Hochpräzise Hinteranschlagskonstruktion - Erweiterbare Achsanzahl

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 170 kg, kecepatan spindle penggilingan: 45.000 rpm, kecepatan spindel (min.): 5.000 rpm, kecepatan spindel (maks.): 45.000 rpm, diameter penjepit: 140 mm, panjang penjepitan: 1.100 mm, de-1 Itedogb Ec Hjpfx Afief

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jam operasional: 8 h, nomor mesin/kendaraan: BD63CNC4A2SP, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, Diameter pipa (maks.): 63 mm, Sudut pembengkokan (maks.): 190 °, berat keseluruhan: 1.800 kg, panjang total: 4.000 mm, lebar total: 1.000 mm, tinggi total: 1.300 mm, daya: 18 kW (24,47 hp), tegangan masuk: 380 V, jenis arus masuk: AC (pendingin udara), jumlah tampilan digital: 1, masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, de Itodpfx Aoyaz Egefief

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Itsdpfxexnlflo Afiof Ideal stop system including: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Kondisi: baru, de-hu Iedpfxoy Dvlks Afijtf

Kondisi: baru, Tahun pembuatan: 2026, condition: new Year of manufacture: 2026 Stock no.: 090209 Delivery time: May 2026, subject to prior sale Country of origin: Italy Price: €7,780 Leasing rate: €150.15 Bestseller 1 Max. diameter (steel pipe): 42 mm Length: 400 mm Width: 570 mm Height: 1,000 mm Weight: 80 kg Max. bending modulus (E-Modulus): 4 cm³ Iodpfjwirzfox Afistf Standard steel pipe: 42 x 3 mm Furniture tubing: 48 x 1.5 mm St35 (for hydraulic lines): 42 x 4 mm Stainless steel AISI304-318: 42 x 2 mm Stainless steel AISI308 (for food industry): 42 x 2 mm Soft brass: 50 x 3 mm Hard copper and aluminium: 54 x 2 mm Soft copper: 54 x 2 mm Conduit pipe (TAZ): 60 x 2 mm Mepla, Geberit, and similar: 50 x 4 mm Round steel (S275JO): 30 mm Flat steel (S275JO): 40 x 20 mm (horizontal), 40 x 12 mm (horizontal) Max. bending radius: 260 mm Min. bending radius: 10 mm Max. bending speed: 3.3 rpm Motor: 1.1 kW Manual clamping Digital bending angle display Digital clamping point display 30 programs with 9 angles each Springback compensation Overload protection Mobile on castors and with handle Foot pedal Tools not included ALSO AVAILABLE AS THE FOLLOWING MODELS (PRICES ON REQUEST): MB 42M (single phase, 2 rpm) MB 42PM (portable, single phase, 2 rpm)

Kondisi: bekas, Mesin bekas Mesin bor lubang deret bekas merek Ganner tipe RB 107 No. mesin: 121627 Itsdpjw I Unwjfx Afiof Daya motor: 1,5 kW Kecepatan motor: 2800 rpm 1 balok bor dengan 26 spindel, jarak sumbu 32 mm 3 penahan benda kerja 1 saklar kaki Ketersediaan: segera Lokasi: Röllbach