Beli Bruderer Press Bsta30. Kapasitas 30 Ton, Layar Digital. bekas (49.700)

Kondisi: bekas, Bruderer Press BSTA30. Kapasitas 30 ton, layar digital. Rentang variabel 100-600 RPM. Penyesuaian langkah 8-40mm. Penyesuaian ram 40mm. Motor penggerak 5,5KW. Lebar material maksimum 120mm. Ketebalan material maksimum 3mm. Gjdpfjx Sr Nbjx Aiyjit

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 125 t, lebar meja: 700 mm, panjang meja: 900 mm, lubang tembus di meja: 210 mm, penyesuaian silinder hidrolik: 100 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES o Steel construction frame o Vibration stress relief applied to the frame and welded parts o Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards o Pneumatic clutch and brake combination – OMPI-Italy o Slide guided in 8 bronze bushings o Ram with cushion cylinder o Steel cast parts: ram, connecting rod, and pitman – GS52 o High-strength solid crankshaft – 4140 o Bronze bushings inside the connecting rod (Zr14) o Rear-mounted flywheel o Spare bolster plate o Hydraulic overload protection o Motorized table-ram adjustment o Automatic central lubrication o Pneumatic pedal with latch and dual-hand control with timer o Electric counter o PLC control and touchscreen – DELTA o Electrical switchgear: SIEMENS-SCHNEIDER o CE conformity – OPTIONAL o Finger protection light curtains – SICK, LEUZE o Safety PLC (controls all electrical system, valve, dual-hand and pedal) – PILZ o Double-coil safety valve – GPA, TOPAIR o Locked position switch and control panel o Safety block o Protective guards in compliance with CE safety directives TYPE D-TYPE MONOBLOCK FRAME Gisdevxhqvopfx Aiyjt Capacity 125 Ton Bed – Ram Distance 500 mm Distance Between Housings 1000 mm Ram Adjustment 100 mm Approx. Press Width 1250 mm Approx. Press Depth 1750 mm Approx. Press Height 2850 mm Table Bore Diameter 210 mm Table Size 700 / 900 mm Die Clamping Slot Diameter 55 mm Ram Size 340 / 550 mm Table Height from Floor 850 mm Stroke Adjustment 10 / 125 mm Strokes per Minute 50 spm Motor Power 11 kW Motor Speed 1450 RPM Approximate Weight 8,500 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, panjang langkah: 500 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 30 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 80/30 TON COLUMN TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 80/30 ton column type hydraulic deep drawing press is an industrial press solution with a four-column rigid frame, specifically engineered for high-precision metal deep drawing, forming, and die testing applications. Its St52 grade steel construction is stress-relieved by vibration technique, ensuring high parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and cushion systems operate independently, with precise stroke and pressure adjustments available via the operator panel. Featuring hydraulic components from REXROTH or PARKER, an IE3 class motor, and PLC control, this model ensures long service life, safety, and energy-efficient operation. Automatic lubrication and contamination alerts for filters minimize maintenance requirements. This machine is ideal for small to medium series production, die testing, and precision forming tasks. Key Advantages - Four-column rigid press frame design - Independent stroke and tonnage adjustments for ram and cushion - Full control via touchscreen panel - High repeatability and accuracy - Low maintenance costs, long service life Areas of Application - Metal deep drawing applications - Deep drawing processes - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons Gijdpfxjx N Ults Aiyjt CAPACITY (CUSHION): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 microns/m PERPENDICULARITY TOLERANCE: 60 microns/m STROKE (RAM): 500 mm STROKE (CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE DRAWING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s CUSHION FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 200 mm – Ck45 CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROXIMATE MACHINE HEIGHT: 3300 mm APPROXIMATE MACHINE WIDTH: 1050 mm APPROXIMATE MACHINE DEPTH: 1050 mm BED HEIGHT FROM GROUND: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (adjustable via touch panel) RAM / CUSHION STROKE & TONNAGE SETTING: Adjustable via touch panel SYSTEM & PRESS STATUS INFORMATION: Viewable via touch screen DIE MEMORY: Adjustable via touch panel LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons

Kondisi: baru, Tahun pembuatan: 2025, OMCN P30/SA hydraulic press with dual-speed hand pump, 30 tons. The OMCN P30/SA hydraulic press features a manual drive via a dual-speed hand pump and a robust base frame that ensures maximum stability with minimal floor space requirement. Thanks to the perforated frame, the support base can be height-adjusted in 9 different positions, allowing the press to handle workpieces of various sizes. The integrated winch facilitates easy and quick adjustment of the worktable height. + Rapid approach + Precision Essential in workshops and industrial settings, this press is ideal for metal pressing tasks such as assembly operations for mechanical components, fitting of bearings or pulleys onto shafts. Gijdpfoklyvtjx Aiyst Manufactured in Italy and CE certified, the press is constructed from durable materials to ensure long-term reliability, and it can generate a pressing force of 30,000 kg. Dimensions: 2180 x 1300 x 600 mm Weight: 280 kg Pressing force: 30 tons Distance between uprights: 695 mm Piston stroke: 190 mm Piston diameter: 60 mm

Kondisi: bekas, Mackey Bowley Hydraulic Press, kapasitas 100 ton, stroke 400 mm, meja 700 x 750 mm, diameter ram sekitar 160 mm, diameter pelat dasar ram 700 mm, model CM507/04. Gsdpfxsyabf Hj Aiyoit

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, penyesuaian silinder hidrolik: 40 mm, tinggi pemasangan: 2.500 mm, gaya penekanan: 30 t, panjang langkah: 40 mm, Automatic high-speed punching press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with two synchronized double-roll feeders for strip widths from 5 mm to 150 mm. Logical interface control via PLC touchscreen. Numerically controlled punching operation (NC). With stroke and speed counter, programmable length, automatic stop. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Operating manual in English. Pressing force: 300 [kN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Worktable: 540 x 300 [mm]. Giodpjvkfmrsfx Aiyot Adjustable speed 100 – 600 strokes per minute, up to 10 per second. Maximum strip thickness 2.5 [mm]. Centralized lubrication. Power consumption 5.5 [kW] Technical air 5-10 [bar]. Warranty: 1 year. All specifications subject to change without notice.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs - Number of openings (daylights): 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - Accessible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with embedded heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90°C - Max. temperature: 120°C Giedpfodx R Tfex Aiyot - Operating voltage: 400 V/50 Hz - Safety standards compliant with CE regulations Standard equipment: - Press table movement with rack-and-pinion and parallel guides at two corners, made of self-lubricating material - Electronic control unit with touch screen for machine operation and monitoring - Digital timer for setting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for setting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety stop for lower press table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Available ex stock 54634 Bitburg - Immediately available -

Kondisi: baik (bekas), Technical Data Gijdpfex Triwex Aiyst Pressing force: 30 t Stroke rate: 100 – 600 mm Ram stroke, adjustable: 8 – 40 mm Installation height: 200 mm Various coil reels in stock up to 300 kg. Ongoing purchase of German used machines without NC or CNC control.

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5255, Press force: 30 t Gsdpfjcxxu Nex Aiyeit Strokes per minute: 100-600 spm Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left-hand side Adjustable stroke: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, stroke counter, separate control cabinet, pneumatic clutch, left-hand BRUDERER precision double-roll feeder.

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m Giedpfx Aocxxycoiyjt High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: bekas, nomor mesin/kendaraan: 8483, Pressure: 30 t Strokes per minute: 100-600 spm Sheet width: 115 mm Table size: 450x450 mm Bruderer precision double roll feed: BBV 190/85 left Adjustable stroke range: 16-40 mm Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Shut height: 290 mm Entry width: 120 mm Feed length: 15-80 mm Giodecxxrdopfx Aiyet Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Pass-through opening in table: 315 x 100 mm Total connected load: 5.5 kW Approx. machine weight: 3 t High-speed punching press in 3-column design, equipped with BRUDERER BBV 190-85 feeder on the left, cooling fan, swivel safety guard, pneumatic clutch, electric two-hand operation, manual roller venting on the feeder.

Kondisi: bekas, Tahun pembuatan: 1971, nomor mesin/kendaraan: 1967, Pressure: 30 t Stroke rate: 100 - 600 strokes/min Adjustable stroke range: 8 - 40 mm Ram adjustment: 40 mm Feed width: 198 mm Tool installation height - min./max.: 230 - 270 mm Roller width: 110 mm Pass-through opening in table: 310 x 80 mm Column distance (left-right): 330 mm Column distance (front-rear): 280 mm Table height above floor: 990 mm Column diameter: 50 mm Voltage: 380 V Frequency: 50/60 Hz Control voltage: 24 V Table size: 475 x 450 mm Ram diameter: 190 mm Total power requirement: 0.96 - 5.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 1.2 x 1.16 x 2.15 m Precision high-speed punching press in 3-column design, with: - Optionally available with original Bruderer precision double roller feed, pull and push operation on right and left side (see photo), - Electro-hydraulic VARI drive, - Pneumatic clutch with safety valve, - Three operating modes: single stroke, single cycle, and continuous operation, - Central lubrication, - Cooling fan for consistent machine temperature, - Pressure gauge for air pressure monitoring, - Stroke counter integrated in the control panel, - Separate, lockable control cabinet, - Two-hand operation, and Giedpfx Aijcxxxmjyot - Emergency stop safety feature. Newly painted, visually in good condition!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Completely overhauled BRUDERER stamping press BSTA300 incl. new press control system Technical data: ----- Gedpfx Aietvnlbjyoit Press force 300 kN Die mounting opening 750 mm Stroke rate 80–1400 (depending on selected stroke) Adjustable stroke 13, 16, 19, 25, 32, 38, 44, 47 mm Ram adjustment range 51 mm Die height 171–239 mm (depending on selected stroke) Bolster plate 740 x 480 mm Ram area 630 x 360 mm Material pass line width 206 mm Bed opening 710 x 160 mm Material entry height 50–120 mm Material flow direction left to right Feed Servo feed Machine weight approx. 5,150 kg Machine color RAL 1013 pearl white Attachment color RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 30.000 kg, Perlengkapan: kendali jauh kaki, 30-ton load capacity, self-centering, new 380V Hand and foot remote control Rotation speed: 100 - 1000 mm/min Diameter range: 600 - 4500 mm Drive wheel diameter: 350 mm x width 180 mm Material: heat-resistant PU, non-slip Dimensions: 2350 x 1460 x 1050 mm Dual drive, synchronized Gjdpfswrpfgox Aiysit

Kondisi: bekas, Press Eksentrik, MABU-PRESSEN 6 TF, Mesin Bekas Produsen: MABU-PRESSEN Maschinenfabrik K. Burkard KG Tipe: 6 TF Dimensi keseluruhan: Lebar: 700 mm Kedalaman: 770 mm Gsdpfoy R Ebusx Aiyjit Tinggi: 1570 mm Berat: 310 kg Tahun pembuatan: 1973 Gaya tekan: 6000 kg (6 ton) Panjang langkah: 6 / 60 mm Jumlah langkah: 220 langkah/menit Daya motor yang dibutuhkan: 0,7 PS Ukuran meja: 400 × 215 mm

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Giedpfx Aiswp Nv Hjyst Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: baik (bekas), gaya penekanan: 100 t, lebar total: 3.000 mm, Manufacturer: AMADA Model: HFE 100-3L + ASTRO 50Y Control: Operateur Year of manufacture: 2007 Long stroke CNC press brake 8-axis control AMADA ASTRO 50Y robot The ASTRO 50 Y bending cell consists of an HFE press brake paired with a 7-axis robot. Designed for machining medium/fine thickness and large-sized parts. The machine is extremely versatile thanks to a 4-meter linear axis and a variety of grippers. Giodpfx Aijvwcdueyot Programming is especially user-friendly via EASY CAM software. Safety: CE-compliant safety fencing around the machine and robot. Specifications Metric / US Standard Currently, there are no specifications available for this machine. Dimensions (estimated) Length: 8000 mm Width: 4000 mm Please note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. Details are provided in good faith but accuracy cannot be guaranteed. Therefore, no representation or contractual obligations are made. We recommend verifying all critical details independently.

Tahun pembuatan: 2010, Kondisi: baik (bekas), Manufacturer: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year of manufacture: 2010 Rebuilt in 2010 with SIEMENS TOUCH Rebuild cost: EUR 200,000 Distance measuring device with dual sensor Large package of pressing tools in various diameters Specifications Metric Imperial Center height: 550 mm Max. wheel diameter: 1100 mm Max. frame length: 2500 mm Max. pressing force: 250 T Giodpfx Aokvnggsiyet Ram stroke: 500 mm Cylinder diameter: 300 mm Working speed: 10 - 80 mm/min Ram speed: 1300 mm/min Return speed: 1300 mm/min Dimensions (approximate) Length: 6100 mm Width: 5730 mm Height: 3750 mm Weight: 15,900 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representations or terms of contract. We recommend verifying all critical details yourself.

Kondisi: baik (bekas), Tahun pembuatan: 1978, exzenterpresse-erl135b-de Gedpjyvuq Nefx Aiyeit

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 10 t, panjang langkah: 65 mm, lebar meja: 450 mm, panjang meja: 320 mm, lebar pelat tuas: 280 mm, panjang pelat penekan: 180 mm, panjang total: 1.145 mm, lebar total: 970 mm, tinggi total: 1.930 mm, berat keseluruhan: 1.250 kg, Perlengkapan: dokumentasi / manual, Press Eksentrik LEN 10C. Tahun produksi: 1987 (SMERAL TRNAVA, Ceko). - Tekanan: 10 Ton - Jumlah langkah ram pada operasi kontinu: 80 atau 160 /menit - Jumlah langkah tunggal: 45/menit dan 60/menit - Langkah ram yang dapat diatur: 6-65 mm - Rentang penyetelan antara meja dan ram: 45 mm - Jangkauan: 160 mm - Jarak antara meja dan ram: 225 mm Gsdjy Ry Tfepfx Aiyoit - Ukuran meja: 450 x 320 mm - Ukuran ram: 280 x 180 mm - Dimensi keseluruhan (panjang x lebar x tinggi): 1145 x 970 x 1930 mm - Kopling pneumatik (tekanan udara minimum: 0,4 MPa) - Daya motor: 1,1/1,5 kW - Berat mesin press: 1250 kg.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, xerox-c70-1980846 Gisdpfxsy Rvdmo Aiyet

Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Giodpfxsyxda So Aiyjt

Kondisi: bekas, konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 10.000 kg, beban gandar yang diizinkan (gandar 2): 10.000 kg, beban gandar yang diizinkan (gandar 3): 10.000 kg, pendaftaran pertama: 03/2007, panjang total: 9.410 mm, lebar total: 2.500 mm, suspensi: udara, ukuran ban: 275/70 22,5, jarak roda: 4.870 mm, warna: abu-abu, Tahun pembuatan: 2007,

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 7 A, gaya penekanan: 150 t, panjang langkah: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DOUBLE SPEED AND FAST ADVANCE CAPACITY: 150 TON The monolithic frame is fully laser-cut and bolt-assembled in a stack. This feature ensures our presses are deformation-resistant even in highly stressed areas. All components are manufactured in Italy. Hydraulic power unit with ICME submersible motor, 400 V, 50/60 Hz; cylinders and frames manufactured in Italy. GALTECH monoblock valve. Gjdpfey E Rr Iex Aiyjit No. 2 Unidirectional external gear aluminum pumps by VIVOIL—one for fast approach and rapid return (set at 20 bar), and one with adjustable pressure via handwheel to set the required power. Maximum pressure valve with mechanical lock to prevent overpressure. Top-range CETOP 2 MP valve block. Standard manometer to display delivered pressure. INTECH electrical panel, certified in compliance with current regulations and independently CE marked. Maximum capacity: 150 TON Fast approach speed: 1450 mm/min Working speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Rod end diameter: M30 Tank capacity: 50 liters Max pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1300 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVABLE CYLINDER Capacity: 150 tons. Automatic dual-speed operation with rapid approach. Special electrical control panel with rapid/slow switch for one-hand operation. Transversely movable cylinder, stroke: 816 mm. Internal daylight (column to column): 1500 mm Ram stroke: 300 mm Godpfxolruhdo Aiysit No. 01 ELECTRO-HYDRAULIC PRESS WITH MOVABLE PISTON AXA PM150/15 – NEW CONDITION, CE MARKED. -AUTOMATIC DUAL-SPEED WITH FAST APPROACH. -COMPLETE WITH SPECIAL ELECTRICAL PANEL AND RAPID/SLOW SWITCH FOR ONE-HAND CONTROL. -TECHNICAL DATASHEET ATTACHED. - Pressing force: 150 tons - Cylinder stroke: 300 mm - Internal clearance: 1504 mm - Approach speed (rapid): 1450 mm/min - Working speed (slow): 105 mm/min - Cylinder piston stroke: 300 mm - Cylinder rod diameter: 110 mm - Shank diameter: M30 - Tank capacity: 50 liters - Max pressure: 350 bar - Voltage: 400 V, Frequency: 50-60 Hz - Motor power: 3 kW - Max absorbed current: 7.3 A - Weight: 1500 kg Features: - GALTECH distributors. - 2MP block. - Two unidirectional VIVOIL external gear pumps: one for rapid approach and return (set to 20 bar), and one with pressure control handwheel for setting required pressing force. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard pressure gauge for monitoring delivered force. - INTECH control panel certified to current standards with independent CE marking.