Beli Cleco Obeng Sudut bekas (1.625)

Kondisi: baik (bekas), de-001 Fgsdpfsw Iftqsx Airjc

Kondisi: sangat baik (bekas), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Fgjdpfxowxv Hko Airsc Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller Ranging from simple start-up operations to complex sequencing applications—with up to 20 phases and 250 cycles—for optimal speed, accuracy, and operator comfort on every fastener. The controller is equipped with a variety of interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 Volt). The CVI II controller can operate either a hand-held electric tool of the ER series or a stationary EM series screwdriving spindle. Please note: The CVI II can also be used in combination with a transducer-controlled angle screwdriver such as the Desoutter ERA40J, which features a torque range of 8–40 Nm and a 3/8" output drive. Storage capacity Stores between 2,500 and 8,500 tightening results per station depending on the number of cycles and mode of operation (asynchronous or synchronous). Tightening strategies – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Prevailing torque – Yield point detection – Stalling torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Compatible tools: Angle screwdrivers / inline screwdrivers / pistol grip screwdrivers / stationary screwdriving spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg Financing through our bank is also available. komplett-konzept.leasingo.de For more new and used items, visit our shop! International shipping costs on request!

Kondisi: bekas, 48EAE28AL3, Cleco, Angle screwdriver Model: 48EAE28AL3 Fedpjvrggpjfx Airjgc Condition: Used

Tahun pembuatan: 2014, jam operasional: 10 h, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 6151656290, Desoutter cordless angle shut-off screwdriver ELS15-480-A Demonstration tool with charger 230 V + 2 batteries (18 V 2.6 Ah) No-load speed: 200 to 480 rpm Torque range: 5.0 to 15 Nm Drive: 3/8" square Length: 410 mm Weight without battery: 1.2 kg Fgjdpfjcr H Eaex Airsc

Tahun pembuatan: 2011, Kondisi: bekas, nomor mesin/kendaraan: 6151653640, Used Desoutter ERAL2-60 angle screwdriver, electrically controlled, including 2.5 m motor cable compatible with Desoutter CVI 2 screw controller Output drive: 3/8" Torque: Min.: 8 Nm Max. continuous: 45 Nm Max. peak: 60 Nm No-load speed: 918 rpm Length: 443 mm Weight: 1.80 kg Fedpfecpbcvsx Airegc

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Fungsi telah diuji; barang berasal dari pembongkaran fasilitas pemasok otomotif Pabrikan: Cleco / Apex Tool Group Fsdeyq R T Ujpfx Airegc Tipe: TSE 961446PT Tegangan: 380 V DC Arus: 2–10 A DC Suhu operasional: –20 hingga +70 °C Kelembapan: 0–90% tanpa kondensasi Unit kontrol baut terkait juga tersedia di toko kami!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Telah diuji fungsinya; Berasal dari pembongkaran instalasi produksi pemasok otomotif, dibongkar secara profesional. Fgodpsyq R Tzjfx Airsc

Kondisi: bekas, 48EPE150D4, Cleco, pistol grip screwdriver Model: 48EPE150D4 Condition: Used Fgedpfsvrggcex Airoc

Kondisi: bekas, Tahun pembuatan: 2010, de Fedpfxoy U Tg Hs Airogc

Kondisi: siap digunakan (bekas), Number of drilling motors: 1 unit Corner hinge drilling: 1=yes, 0=no -> 1 yes Olive drilling: 1=yes, 0=no -> 1 yes 1 HESS Fitting Insertion Station for Corner Hinges and Olives High-performance drilling technology at a low price—this HESS insertion station is ideal for trades professionals. A complete station for drilling both corner hinges and olives, equipped with all essential features: 2 clamping cylinders, drilling depth measurement, efficient suction/extraction, stop systems for hinge and olive drilling, drill head with quick-change chuck, adjustable feed speed, and automatic program sequence. This means technology for perfect results: just one machine, with a single drilling unit and only one drill head for two operations. System Features: - Base frame designed as a setting wall for sashes and frames up to 100 mm - Drilling unit centrally positioned, height-adjustable manually via leadscrew - Borehole position and depth preset for the target fitting type; adjustable via stop system for type changeover - Drilling feed speed variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic program cycle for: fix workpiece – start drilling motor – drill unit moves forward – drill – drill unit retracts – drilling motor stops – release workpiece fixing - Fixed stop systems Standard Equipment / Technical Data: Fgodsvu Hgzopfx Airec Sturdy base frame as setting wall, precise support made of abrasion-resistant and dimensionally stable plastic, designed for sashes and frames up to 100 mm thick. Drilling for both corner hinges and olives in one machine with a single drilling unit. Simple and convenient vertical operation, easy handling, no templates, minimal time required for secure workpiece positioning, guaranteed accurate and precise holes. 2 clamping cylinders for immovable securing of sash or frame, adjustable for different wood thicknesses. Lateral rebate stop for corner hinges, ergonomically arranged stop system for olive drilling with 14 foldable stops and additional color markings. Fixed stop system for determining borehole height when switching from hinge to olive. Automatic drilling depth sensing for both applications. Drilling unit with quick-change chuck for different tools for hinges and olives; tool change in seconds. Automatic program sequence, clean working thanks to efficient dust extraction, compact footprint and mobile on swivel/castor wheels. Electrical equipment compliant with VDE standards. Power connection: 0.55 kW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4–8 bar Extraction connection port: 1 x 100 mm diameter Extraction speed: 25 m/sec. Dimensions required: Width: 2,600 mm Height: 1,250 mm Depth: 800 mm Support height: 300 mm Paintwork: RAL 7030 Stone Grey with RAL 1018 Zinc Yellow 1 Drill Set with 1 x 25 mm and 2 x 10 mm drills, plus 1 additional 34 mm drill (Technical data as provided by manufacturer – subject to change without notice!)

Kondisi: sangat baik (bekas), Panjang 690 mm Utas M16 Tinggi 1020 mm Berat mesin sekitar 360 kg Meja sudut dengan pola lubang meja Ukuran PxLxT: 1020x690x40 mm Pemasangan PxL: 330x690 mm Fsdozcgk Topfx Airjgc Utas: M16 Berat: 360 kg

Kondisi: bekas, Panjang 800 mm Fedpfjzcgfwex Airogc Lebar 600 mm Tinggi 600 mm Berat 410 kg

Kondisi: baru, Produsen: HEIDENHAIN Tipe: ROD 780 Nomor ID: 383600-02 Metode pengukuran: Inkremental Jenis konstruksi: Alat pengukur sudut dengan bantalan internal Tipe poros: Poros penuh Diameter poros: 14 mm Untuk kopling poros terpisah Jumlah garis: 18.000 Sinyal keluaran: 1 Vss / 1 Vpp gelombang sinus Akurasi sistem: ±2 detik busur Fgodpfx Aszcgufsirjc Koneksi listrik: Steker M23, 12 pin Panjang kabel: 1,0 m Toleransi aksial: hingga ±1 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, jenis arus masuk: AC (pendingin udara), lebar produk (maks.): 400 mm, tegangan masuk: 230 V, minipack-modular-50s-en Fgodpfx Aox Tr Tcsirjc

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, jenis arus masuk: AC (pendingin udara), lebar produk (maks.): 400 mm, tegangan masuk: 230 V, MINIPACK_Modular_70_de_en Fsdpjx Tr Umjfx Airjgc

Kondisi: bekas, nomor mesin/kendaraan: 008402, de-1 Fgedpfx Aisygtbmsrec

Kondisi: bekas, Penggerak elektrik Pemicu siklus melalui sakelar kaki Berbagai alat disertakan dalam pengiriman: 1 x pisau atas/bawah dengan radius 4 mm 1 x pisau atas/bawah dengan radius 6 mm 1 x pisau atas/bawah dengan radius 7 mm Fodpfx Asythzujirsgc 1 x pisau atas/bawah dengan radius 8 mm 1 x pisau atas/bawah dengan radius 9 mm 1 x pisau atas/bawah dengan radius 15 mm (saat ini terpasang)

Kondisi: baru, Tahun pembuatan: 2018, de20240614a1 Fgsdpfxswriuue Airsc

Kondisi: sangat baik (bekas), Clamping angle plate Height: 2550 mm Width: 1190 mm Depth: 1100 mm Material thickness: 80 mm Fsdpfx Aiohk I Hgorsgc Weight: 4.1 t

Kondisi: baik (bekas), Tahun pembuatan: 1993, 1 x Graule gergaji potong dan mitre model ZS 170 Data teknis: - Motor: 400 V / 3,0 kW - Putaran: 3500 rpm - Panjang potong: 410 mm - Lebar potong: 410 mm pada 90° / 290 mm pada 45° - Tinggi potong: 170 mm pada 90° / 115 mm pada 45° - Rentang mitre horizontal: 45°-90°-25° - Diameter mata gergaji: 420 mm Fgodpfx Aijyxxzworoc - Diameter konektor ekstraktor: 100 mm - Berat: 120 kg Lokasi: tersedia dari stok, 54634 Bitburg - tersedia segera -

Kondisi: baru, Tahun pembuatan: 2021, Demonstration machine Year of manufacture: 2021 (Bench-mounted machine) For stationary profile milling of leading edges on softforming and postforming workpieces. Also suitable for trimming/milling thick PVC edges on right-angled workpieces and those with multi-sided edge banding. Processing of symmetrical and asymmetrical softforming and postforming profiles is possible after manual adjustment of profile depth. The motor is guided manually by tracing along the workpiece. Standard equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, infinitely variable up to 27,000 rpm, equipped as standard with radius cutter R=2. Tracing is performed by a guide ring on the workpiece. - Unit guidance on precision round guideways. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (dependent on edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1Ph Total power: 0.8 kW Pneumatic connection: 6 bar Required space: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Availability: short-term Fgjdpfxjkwhape Airsc Location: Solingen

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ALFAMACCHINE T350 Double Mitre Saw Double mitre saw for cutting at 45° angles Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2 × 1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Fedjyyna Eopfx Airjgc Cutting height: 10–80 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ALFAMACCHINE T350 Double Mitre Saw Fsdpfx Asyybyfsirogc Double mitre saw for cutting at 45° angles Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2 × 1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ALFAMACCHINE T350 Double Mitre Saw Fgedpeyzrgxefx Airjc Double mitre saw for cutting at 45° angles Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2 × 1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Kondisi: baik (bekas), Included in the scope of delivery: 01x Holder for push-through safety device, used Material color: sendzimir galvanized Total length: approx. 200 mm Total width: approx. 80 mm Opening dimensions: approx. 42 x 37 mm (WxH) For rectangular tube: 40 x 35 mm Hole spacing: approx. 50 mm Number of holes: approx. 2 pcs Hole diameter: approx. 9 mm Material thickness: approx. 3.00 mm Weight per piece: 0.320 kg Your contacts at our company: Fgjdpfopbcfgsx Airec Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If shipping or transport of this item is required, additional costs will apply. These costs depend on the place of delivery and/or delivery scope and can be provided upon request.