Beli Cronosstech Ceehp 400 bekas (19.593)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 7.315 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4445, jarak pergerakan sumbu X: 2.320 mm, jarak lintasan sumbu Y: 1.980 mm, jarak gerak sumbu Z: 860 mm, model controller: Siemens Sinumerik 840D sl, kecepatan spindel (maks.): 40.000 rpm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Harga baru mesin adalah €425.000, belum termasuk PPN! Catatan: Penjualan ini adalah mesin saudara dari Hamuel Reichenbacher yang baru-baru ini dilelang, dengan spesifikasi yang sama. DETAIL TEKNIS Jarak pergerakan sumbu X1/X2: 2.320 mm Jarak pergerakan sumbu X3/X4: 2.320 mm Jarak pergerakan sumbu Y1/Y2: 1.980 mm Jarak pergerakan sumbu Z1/Z2: 860 mm Rentang putaran sumbu B1: ±181° Rentang putaran sumbu B2: ±181° Rentang putaran sumbu C1: ±361° Rentang putaran sumbu C2: ±361° Kecepatan spindel: 40.000 RPM Pemasangan alat: HSK-E40 Daya spindel: 7 kW Jumlah spindel: 2 Kecepatan pergerakan pada arah X: 90 m/menit Kecepatan pergerakan pada arah Y: 45 m/menit Kecepatan pergerakan pada arah Z: 90 m/menit Jumlah alat: maks. 6 buah Diameter alat pada 4 alat: maks. 40 mm Diameter alat pada 2 alat: maks. 240 mm Panjang alat dari permukaan datar: maks. 270 mm Berat alat: maks. 2 kg Berat total semua alat: maks. 24 kg DETAIL MESIN Pengontrol: Siemens Sinumerik 840D sl Pasokan udara bertekanan Kualitas udara bertekanan: sesuai dengan DIN ISO 8573-1 Tekanan: min. 7 bar Aliran volume udara: sekitar 1.000 Nl/menit Tegangan: 400 V (±5 %) Frekuensi: 50 Hz Koneksi jaringan: 3 fase, kabel netral, dan kabel pentanahan Ketahanan terhadap arus pendek Ic: 17 kA Dimensi & Berat Dimensi (X x Y x Z): sekitar 5.800 x 3.600 x 3.000 mm Berat mesin: sekitar 15,0 ton Jam Operasi Jam spindel spindel 1: 7.872 jam Jam spindel spindel 2: 7.315 jam Iodjztxczspfx Ahfoif PERALATAN Konveyor serpihan Probe pengukuran 3D Hexagon Catatan: Detail teknis lebih lanjut dapat dilihat pada penawaran terlampir. Peralatan penjepit dan alat tidak termasuk dalam penawaran.

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 16244, Tahun pembuatan: 2020, jam operasional: 7.200 h, kapasitas angkut: 2.000 kg, tinggi angkat: 4.300 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tegangan baterai: 48 V, panjang garpu: 1.000 mm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Kapasitas angkat: 2.000 kg Ketinggian angkat: 4.300 mm Perangkat tambahan Produsen: KAUP Model: 2 T 163 S Jenis: Pengatur posisi garpu dengan gerakan lateral Lebar bangunan: 1.120 mm Gerakan lateral: ±425 mm Rentang pembukaan: 140–990 mm Kelas ISO: 2 Berat sendiri: sekitar 129 kg Garpu Jenis: Garpu yang dapat dipasang Kapasitas angkat per pasangan garpu: 2.500 kg pada titik berat beban 600 mm Dimensi garpu: 120 × 40 × 1.000 mm Kelas ISO: 2 Berat per garpu: sekitar 57 kg Kapasitas angkat sisa Pada ketinggian angkat 3.000 mm dan titik berat beban 500 mm: sekitar 1.620 kg Pada ketinggian angkat 3.000 mm dan titik berat beban 600 mm: sekitar 1.440 kg Pada ketinggian angkat 3.000 mm dan titik berat beban 1.000 mm: sekitar 1.000 kg RINCIAN MESIN Tiang pengangkat: Tiang pengangkat triplex FSV4300 Katup hidrolik: 4 Penggerak: Elektrik Jam operasi dan pengangkatan: sekitar 7.200 jam Jam operasi keseluruhan: sekitar 16.800 jam Tegangan baterai: 48 V Catu daya PC: 24 V / 80 W Konektor pengisi daya: 400 V Baterai: 4 buah, 48 V / 750 Ah BFS Pengisi daya: 2 Hawker Werk HF, 48 V / 120 A PERLENGKAPAN Pengatur posisi garpu KAUP dengan gerakan lateral Ban Continental SE di bagian depan dan belakang, tahan abrasi, termasuk K64A Kursi pengemudi Grammer MSG65 dengan pelapis kulit sintetis Sakelar arah perjalanan di sandaran lengan Pengoperasian dengan tuas kecil Layar multifungsi dengan indikator jarak sumbu roda Kaca spion panorama 2 lampu kerja LED dengan pelindung Sinyal mundur akustik Lampu peringatan LED biru ke belakang Lampu berkedip di bawah kanopi pengaman pengemudi Sakelar kunci sabuk pengaman dengan sakelar kursi OPS Smart Access dengan kartu pengemudi Penutup baterai samping Iiedpfxjzt R A Tj Ahfof Tinggi bangunan dan berat forklift harus diperhitungkan saat memilih kendaraan pengangkut. Tidak ada landasan pemuatan di lokasi. Namun, sebuah forklift dengan kapasitas angkat 15 ton tersedia untuk pemuatan. Jika pengambilan tidak dilakukan tepat waktu, biaya penyimpanan sebesar €20,00 per lot dan per hari yang telah dimulai akan dikenakan. Biaya harus dibayar sebelum pengambilan. Penjualan dilakukan tanpa jaminan atau garansi apa pun. Spesifikasi data teknis diambil dari penawaran sebelumnya. Tidak ada jaminan untuk kesalahan pengetikan dan pengukuran. Jika ragu, silakan bandingkan spesifikasi dengan foto yang tersedia atau periksa barang di lokasi sebelum akhir lelang.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 917, Tidak ada harga minimum – penjualan dijamin dengan harga penawaran tertinggi! RINCIAN TEKNIS Jenis spindel: Z80-K530.04 Jenis penggerak: SIE / HD RINCIAN MESIN Iodpfxoztxgms Ahfoif Daya: 24,5 kW Tegangan: 230 / 400 V Frekuensi: 50 Hz Jenis motor: SERVO PERALATAN Tanda CE Probe pengukur Pemasang dan penyangga alat (sesuai gambar)

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 60 mm, lebar meja: 400 mm, panjang meja: 4.500 mm, penyesuaian langkah: 100 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, tr-hu-01 Isdexrbpnspfx Ahfjif

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar perataan: 430 mm, diameter alat: 120 mm, jumlah bilah: 4, jenis aktuasi: listrik, kecepatan rotasi (maks.): 5.000 rpm, panjang total meja penyerut: 2.900 mm, lebar total: 700 mm, tinggi total: 1.000 mm, berat keseluruhan: 750 kg, Mesin Perata SAC FS 400 | Mesin Serut dengan 4 Mata Pisau Standar! Kondisi Sangat Baik! Mesin Perata SAC FS 400 | Mesin Serut dengan 4 Mata Pisau Standar! KONDISI SANGAT BAIK! Mesin buatan produsen Italia. SPESIFIKASI TEKNIS: - Panjang meja 2900 mm - Lebar kerja 430 mm - 4 mata pisau standar - Motor 3kW - Kecepatan putar poros 5000 rpm - Diameter poros 120 mm - Kedua meja dapat disesuaikan - Rangka yang stabil dan kokoh - Sistem peredam kebisingan poros Dimensi mesin: - Panjang 290 cm - Lebar 70 cm - Tinggi 100 cm - Berat 750 kg Iiedszqlqmspfx Ahfjf KAMI MENYEDIAKAN LAYANAN PENGIRIMAN DI MANA ANDA DAPAT MELIHAT MESIN KAMI? JBS MESIN PERKAKAS KAYU WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, daya: 38 kW (51,67 hp), panjang langkah: 400 mm, lebar meja: 1.320 mm, panjang meja: 1.000 mm, tinggi total: 6.300 mm, jarak antara penyangga: 1.000 mm, penyesuaian silinder hidrolik: 200 mm, Преса за изрязване с усилие 400 тона ERFURT, Германия, модел PKZ 400 Isdelnlpxjpfx Ahfjif

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Tindo Kochkessel 400L Baujahr 2023 Kapazität: 400 Liter Vollständig aus Edelstahl Kippvorrichtung Doppelwandiges Becken mit Wärmeträgerflüssigkeit Mischgeschwindigkeit variabel regelbar Vertikaler Hub am Kesselkopf Iijdpfx Aet Tx Dlehfof Zustand: neuwertig Nur zu Testzwecken verwendet

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press that operates with force generated via an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process safety for applications involving large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton is designed for stable operation in high-volume production with a focus on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table - Die/equipment protection with hydraulic overload safety - Precision guidance with 8-guided ram + counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen - Enhanced operator safety with light curtain protection Applications - Punching/cutting/forming operations requiring large tables - Mass production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-guided ram Iiedpjx N Rzwefx Ahfef • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorised reverse motion • Hydraulic overload safety • Motorised ram adjustment mechanism • Light curtain protection • Sealed oil tank with gear group • Double-solenoid safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material disposal systems • Sliding safety guard in front of the table • Dies built to requested specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 3050 mm Press Depth: 3200 mm Press Height: 4700 mm Table Dimension: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 55 kW Weight: 51,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 150 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Guide Rails General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet forming, deep drawing, and flanging applications. Thanks to its 8-slider H-frame design, maximum rigidity is ensured during the pressing operation; parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. The CHSP 400/150 model, with a 400-ton main ram and a 150-ton cushion ram (blankholder), is designed for deep drawing and flanging applications requiring high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - Fully certified welding applications with TÜRK-AK accredited WPQR and WPS approvals (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke control for ram and cushion - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems to ensure operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 400 Ton - Capacity (Cushion/Blankholder): 150 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. daylight: 100 mm - Max. daylight: 1100 mm - Stress relief: Vibratory stress relieving - Welding application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (Welding procedures are supervised by ‘welding coordination engineers’ certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec Iisdpfx Ahsx N Uhhefof - Main Cylinder Bore: Ø450 mm – Ck45 - Cushion Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 5600 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Die Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.200 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, gaya penarikan balik: 400 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guideway General Description The CRONOSSTECH CHSP series H-type hydraulic spinning and deep drawing presses are engineered to provide maximum rigidity, precision, and process control in sheet metal forming applications that require high tonnage. The 8-guideway H-frame structure ensures stable maintenance of parallelism and perpendicularity tolerances, even with large bed dimensions. The CHSP 1200/400 model, with a 1200-ton main ram and a 400-ton cushion capacity, is designed for heavy industrial applications demanding deep drawing, spinning, and controlled material flow. The vibration stress-relieved steel construction body offers long-lasting and reliable operational performance. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding procedures by TÜRK-AK accredited authority (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel screen (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switching components • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Cushion): 400 Tons Movable / Fixed Table: 1500 × 2000 mm Iijdpfx Ahjx N Uirofsf Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Clearance (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 pieces) Cushion Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial solutions designed for sheet metal forming, straightening, assembly, and die press applications. The 8-guided H-frame construction ensures even distribution of high loads during pressing, delivering stable and repeatable performance. The CHP 400 model is engineered to provide durable and reliable operation for heavy-duty applications requiring high tonnage. CHP Series – Structural Features CHP series presses are designed for demanding industrial use. The frame and supporting components are stress-relieved via vibration. Bronze Zr14 guide bushings allow for smooth load distribution during ram movement, contributing to long-term repeatability and precision. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 guide bushings - WPQR & WPS welding procedures approved by TÜRK-AK-accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and built in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration unit - Two-hand operation control - Light curtain (operator safety – standard) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Ram Capacity: 400 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Qualification: EN ISO 15614-1/2017, WPQR & WPS approved/certified by TÜRK-AK, supervised by certified welding coordinators (EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Fast Descent Speed of Moving Table: 150 mm/s Pressing Speed of Moving Table: 12 mm/s Return Speed of Moving Table: 170 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Ground: 1400 mm Iijdpfx Asx N T Hpehfef Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, nomor mesin/kendaraan: 111302, Fungsionalitas: berfungsi sepenuhnya, suhu: -75 °C, panjang total: 1.300 mm, lebar total: 1.300 mm, tinggi total: 2.000 mm, kapasitas tangki yang dapat digunakan: 100 l, Peralatan tersebut dibongkar dan dinonaktifkan oleh produsen dengan cara yang tepat. Pelat-pelat tersebut ditumpuk menjadi satu. RINCIAN TEKNIS Volume kondensor es: 100 l Kapasitas kondensor es: 12 kg Kinerja kondensor es: 8 g/24 jam Suhu kondensor es: −75 °C RINCIAN MESIN Dimensi area penempatan: 350 × 450 mm Luas area penempatan: 0,48 m² Jarak area penempatan: 111 mm Iijdpfjzrfa Dox Ahfef Refrigeran: Isceon 89 Fluida pemanas: Syltherm HF Peralatan listrik: 400 Volt, 3 fasa, 50 Hz Dimensi & Berat Ruang yang dibutuhkan untuk peralatan pengering beku: 1.300 × 1.300 × 2.000 mm Ruang yang dibutuhkan untuk komponen tambahan: 1.800 × 600 × 2.000 mm Berat: sekitar 1.500 kg

Kondisi: sangat baik (bekas), Pengontrol mesin las titik Miyachi Unitek HF25, Sistem Pengelasan Resistansi DC. Perangkat ini berfungsi dengan baik, menyala dengan benar, layar berfungsi, dan semua fungsi merespons dengan tepat. Di layar, terdapat pesan “EMERGENCY STOP – OPERATOR ACTIVATED”, yang berarti rangkaian penghenti darurat telah diaktifkan – ini bukan merupakan kerusakan pada perangkat. Model ini dirancang untuk mengontrol proses pengelasan titik dengan arus searah (DC) secara presisi. Dilengkapi dengan layar yang mudah dibaca, keyboard numerik, kemampuan untuk memprogram parameter pengelasan, dan antarmuka komunikasi RS-232 dan RS-485. Catu daya 380–400 V AC, 50/60 Hz. Spesifikasi teknis: Produsen: Miyachi Unitek Model: HF25 Tipe: Sistem Pengelasan Resistansi DC Ijdpfx Aezma Sdehfsif Catu daya: 380–400 V AC, 50/60 Hz Arus keluaran maks.: 2400 A RMS Tegangan tanpa beban maks.: 10 V Antarmuka: RS-232, RS-485 Input, antara lain: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Kondisi: Berfungsi dengan baik. Kondisi visual sesuai dengan foto – terdapat tanda-tanda penggunaan normal. Kabel daya telah diperbaiki (bagian yang terisolasi terlihat di foto). Perbaikan ini tidak memengaruhi kinerja perangkat, namun informasi ini disertakan untuk transparansi penjualan.

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 30 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload * The upper and side rolls are driven by a hydromotor and planetary gearbox (all 3 rolls are motor-driven) * The positions of the rolls can be easily read with three digital indicators * Easy removal of bent parts thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system Iodpfx Aow Sl T Sjhfjif OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Rolling: 25/30 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 40 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * Lower, upper, and side rolls are operated by hydraulic cylinders attached to the frame, enabling precise up and down linear movement * Protected against overload * Upper and side rolls are driven by hydromotor and planetary reducer (all three rolls are motor-driven) * The position of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow easy removal of the bent workpiece * Very user-friendly operation with movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic synchronization system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Iijdpfxjxw Ebxs Ahfjf Height: 2350 mm Weight: 17800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in both industrial and laboratory environments. The device is commonly used for: • Quality control (QC) • End-of-line production testing • Laboratories and OEM test stations — Basic specifications • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38kg Iisdpfeyc H N Nox Ahfef — Equipment / included in the set • Main ATS 400 X8 unit with built-in touchscreen • Windows 10 Pro operating system (OEM) • Full set of test cables and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE marking — Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering, all connectors and interfaces are complete

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 700 mm, panjang meja: 1.200 mm, kedalaman tenggorokan: 370 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH C-Frame Eccentric Press 300 Ton An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism. It is used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Frame Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production environments. Key Advantages Iijdpfx Ahjx N Nfhofof - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement via central automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal mode Application Areas - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Two-hand/foot pedal operation system • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic lock system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per requested specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 tons Throat depth: 370 mm Table–ram distance: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (regulation): 150 mm Approx. press width: 2000 mm Approx. press depth: 2700 mm Approx. press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamp slot diameter: Ø60 mm Ram size: 780×400 mm Table height from ground: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approx. weight: 13,200 kg Note: Please inform us if you require any modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 200 t, panjang langkah: 800 mm, lebar meja: 750 mm, panjang meja: 1.000 mm, kedalaman tenggorokan: 400 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production environments with its high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction - Stabilized operation with vibration-dampened structure - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance costs Areas of Application - Heavy-duty metal forming - Deep drawing and metal spinning operations - High-tonnage pressing with dies - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, welded steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in accordance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerances compliant with ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system Iedpfx Asyzb Edshfsif - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Ton - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, lebar kerja: 4.000 mm, sudut pemotongan (min.): 0,5 °, sudut pemotongan (maks.): 3 °, laju langkah (min.): 12 rpm, ketebalan lembaran (maks.): 10 mm, ketebalan pelat baja (maks.): 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (according to material type and thickness) Automatic stroke reduction feature (increases speed for short cuts) High-precision, stress-relieved steel frame Hardened guides and roller-type upper table movement system 1,000 mm CNC-controlled, motorized and programmable backgauge Backgauge features: - Programmable retract function - Lift-up function for long workpieces - ±0.1 mm positioning accuracy Ball transfer sheet support at front table Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special knuckle joint system reduces maintenance needs Ruler, T-slotted and stop-fitted front support arms (1,000 mm) Cutting line illumination and shadow wire Front finger guard (flip-up type) Front and side safety guards Foot pedal Movable control lever Isdsx Nqphjpfx Ahfjif Emergency stop buttons Safety equipment complying with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with return-to-operator feature) Angle-adjustable front squaring arm (0–180°) Front support arms with custom lengths Full-length flip-up front finger guard cover Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual centralized lubrication system Electrical cabinet with air conditioning system CNC-controlled front sheet support and feeding arms Custom throat depth (500 mm) Light-duty protective covers TECHNICAL SPECIFICATIONS (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC controlled) Cutting stroke: Automatic adjustment Throat depth: 250 mm Backgauge travel (X-axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance requirement thanks to centralized automatic lubrication • Production-ready use with PLC control + two-hand/foot pedal operation Application Areas • Cold cutting and punching operations • Cold shearing applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Slides supported on 4 surfaces • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliance • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand–finger safety protection system • PLC control system • Two-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch-screen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One tooling set upon request • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Iedpfxsvtx Ins Ahfeif Approx. press height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: If you require any changes in the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 5,5 kW (7,48 hp), gaya penekanan: 80 t, lebar meja: 660 mm, panjang meja: 860 mm, gaya punching: 80 t, lubang tembus di meja: 180 mm, penyesuaian langkah: 110 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force generated through an eccentric mechanism used in cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. The rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for continuous production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Applications - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double coil safety valve • Manually adjustable stroke Iiedpfx Ahevtx H Refjf • Beam barrier finger and hand safety protection system • PLC control system • Dual hand/foot pedal control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Coil decoiler, feeder, and straightener • One set of die to spec • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed clearance: 420 mm Distance between side frames: 400 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table dimensions: 540×740 mm Die holding slot diameter: Ø40 mm Ram dimensions: 370×230 mm Table height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approx. weight: 4000 kg Note: Please contact us if you require changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, produsen pengendali: ELGO, model controller: P40T 5.7”, lebar kerja: 4.000 mm, sudut pemotongan (min.): 2,1 °, laju langkah (min.): 15 rpm, ketebalan lembaran (maks.): 13 mm, ketebalan pelat baja (maks.): 13 mm, penyesuaian pengukur belakang: dikendalikan CNC, daya: 22 kW (29,91 hp), masa garansi: 12 bulan, Perlengkapan: Pelat tipe tersedia, Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, perlindungan jari, Key Advantages ✔ 13 mm sheet cutting capacity (450 N/mm²) ✔ 4000 mm cutting length ✔ ELGO P40T 5.7” touch NC control unit ✔ NC controlled motorized backgauge system ✔ Program memory ✔ Automatic cutting program ✔ Dual-speed cutting system ✔ Energy saving standby mode ✔ Rexroth hydraulic system ✔ Premium front and rear protective cabin system ✔ Transfer table and ball transfer system ✔ Shadow-line cutting illumination ✔ Heavy-duty steel frame construction Standard Features ELGO P40T 5.7” Touch NC Control Unit - 5.7” TFT touchscreen - Manual operation mode - Single piece processing mode - Program memory - Digital outputs up to 2A - Automatic calculation of angle, pressure, and blade clearance based on material thickness - Automatic cutting program - Sheet support system control - RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Backgauge Retract System Automatic lift-up function for parts longer than 1000 mm CRONOSSTECH X Axis Motorized NC Controlled Backgauge System - NC controlled automatic X-axis movement - 1000 mm travel distance - 150 mm/s speed - ±0.05 mm positioning accuracy - Steel construction body - Hardened ball screw shaft Front Support Arms - Length: 1000 mm - Ruler-based measurement system - T-slot design - Swing-away stoppers Foldable Front Finger Protection System - 1000 mm foldable front guard cover Upper Blade - 2 cutting edges - 450 N/mm² material capacity Lower Blade - 4 cutting edges - 450 N/mm² material capacity Foot Pedal - Special design pedal with emergency stop - Activates pressure cylinders and cutting movement simultaneously Rear Safety System (Excl. CE) Model: EOS2E 2BX - 2 laser beams Ijdozbqw Iopfx Ahfoif - Type 2 – SIL1 safety level - 510 mm detection height - 3 ms response time - IP65 / IP67 protection class - Operating temperature: -30°C / +55°C - 24V DC power supply Emergency Stop Buttons Shadow-Line Cutting Indicator Ball Transfer Table Electrical Equipment - Schneider or Siemens - 400V / 50Hz CRONOSSTECH Premium Cabin System - Front and rear protective cabins - Wide field of vision - Ergonomic operation - Professional industrial design Hydraulic System - Rexroth hydraulic block - Dual-speed cutting system - Two different cutting speeds - High efficiency for short parts - High-speed operation up to 60% of maximum cutting capacity - Energy-saving standby mode Optional Equipment Automatic Blade Clearance Adjustment System - ELGO P40T touch control integration - Automatic blade clearance based on sheet thickness Pneumatic Sheet Support System Type 1 - Dual-position system Extended X Axis Backgauge - 1250 mm - 1500 mm Extended Front Support Arms - 1500 mm - 2000 mm - 3000 mm Full-Length Foldable Front Protection System Technical Specifications - Cutting Capacity (450 N/mm²): 13 mm - Cutting Capacity (700 N/mm²): 8 mm - Cutting Length: 4000 mm - Cutting Angle: 1.8° - Number of Hold-Down Cylinders: 18 - Cutting Speed / Fast Mode: 9 / 15 spm - Distance Between Columns: 4310 mm - Table Height: 930 mm - Table Width: 660 mm - Throat Depth: 250 mm - Backgauge Travel (X): 1000 mm - Machine Length: 5665 mm - Machine Width: 3785 mm - Machine Height: 2380 mm - Hydraulic Oil Tank: 350 Litres - Motor Power: 22 kW - Machine Weight: 18.5 Tons

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, FAMAR TANDEM 400 adalah mesin bubut vertikal CNC berkinerja tinggi dengan dua stasiun pemesinan independen. Mesin ini dilengkapi dengan perkakas yang digerakkan, pemuatan dan pembongkaran benda kerja otomatis, probe pengukuran, pendingin tekanan tinggi, dan filtrasi cairan pendingin. Konsep tandem memungkinkan produksi serial yang efisien dan pemanfaatan bersamaan dari dua stasiun pemesinan yang terpisah. Parameter teknis utama diameter chuck standar: 400 mm diameter chuck maksimum: 400 mm diameter bubut nominal: 300 mm diameter bubut maksimum: 400 mm diameter putaran maksimum: 480 mm panjang bubut maksimum: 300 mm jumlah spindel utama: 2 kecepatan maksimum spindel utama: 4.000 rpm daya nominal spindel listrik utama: 49,6 kW torsi nominal: 458 Nm daya S6 40%: 61,7 kW torsi S6 40%: 724 Nm dimensi mesin: sekitar 3.900 × 3.500 × 3.200 mm berat mesin: sekitar 21.000 kg koneksi listrik: 400 V / 50 Hz daya terpasang: 90 kW desain CE Perlengkapan perkakas UTTUM50 – turret untuk perkakas yang digerakkan, ukuran 50 kecepatan maksimum perkakas yang digerakkan: 8.000 rpm torsi: 100 Nm daya: 15,6 kW UTDUM50 – turret perkakas ukuran VDI 50 12 posisi perkakas penggerak langsung perkakas PPP40 – persiapan untuk 2 sirkuit hidrolik untuk penjepit benda kerja khusus saluran dan katup pengendalian menggunakan fungsi M Otomatisasi TRPAPE20 – 1 konveyor palet putar otomatis untuk pemuatan dan pembongkaran benda kerja satu sistem konveyor umum untuk pengumpanan dan pembuangan benda kerja rak palet putar desain sabuk sistem kontrol hunian palet sistem penyortiran palet tinggi kerja sekitar 950 mm pemuatan dan pembongkaran benda kerja otomatis melalui mesin TRPNVBPTE4 – Sistem shuttle dengan stasiun putar sistem shuttle pemuatan/pembongkaran stasiun putar terintegrasi termasuk 1 set rahang untuk benda kerja AZGRRB500 – set rahang untuk stasiun putar shuttle MPDM2 – probe pengukuran otomatis pengukuran otomatis benda kerja Pendinginan, filtrasi, dan pembuangan serpihan LBCVTT50 – konveyor serpihan konveyor terpisah untuk pembuangan serpihan terutama cocok untuk serpihan pendek, misalnya besi cor, kuningan, dan beberapa paduan aluminium LBVA760 – reservoir cairan pendingin volume 760 l LBAP10 – pompa tekanan tinggi tekanan 20 bar Ijdpszvd Unefx Ahfeif pendinginan internal perkakas LBFTC – filtrasi kertas cairan pendingin cocok untuk besi cor dan aluminium filtrasi partikel sekitar 0,08 mm laju aliran maksimum 60 l/menit LBFTTDF – filter ganda yang dapat dialihkan filtrasi partikel sekitar 0,1 mm sistem bypass yang memungkinkan penggantian elemen filter AZPL – kontrol posisi benda kerja pneumatik Peralatan tambahan Pengendali CNC Siemens 840D sl 2 spindel utama perkakas yang digerakkan sumbu C turret 12 posisi VDI 50 1 konveyor palet otomatis sistem shuttle dengan stasiun putar probe pengukuran otomatis konveyor serpihan terpisah pendinginan tekanan tinggi 20 bar filtrasi cairan pendingin sirkuit penjepitan hidrolik pelumasan terpusat penutup pengaman lengkap CE Mesin ini sangat cocok untuk produksi serial otomatis bagian yang diputar, di mana dua stasiun pemesinan independen, perkakas yang digerakkan, dan penanganan benda kerja otomatis dapat dimanfaatkan.

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, produsen pengendali: ELGO, model controller: ELGO P40T 5,7 ", lebar kerja: 4.000 mm, laju langkah (min.): 12 rpm, ketebalan lembaran (maks.): 16 mm, ketebalan pelat baja (maks.): 16 mm, penyesuaian pengukur belakang: dikendalikan CNC, daya: 30 kW (40,79 hp), masa garansi: 12 bulan, Perlengkapan: Pelat tipe tersedia, Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, perlindungan jari, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear Manufactured in Turkey by CRONOSSTECH, the HGM B16-4000 Hydraulic Guillotine Shear is designed for heavy industry, steel construction, shipbuilding, machinery manufacturing, and high-capacity sheet metal processing applications, featuring a 16 mm cutting capacity and a cutting length of 4000 mm. Equipped with the ELGO P40T touch CNC control unit, automatic blade gap adjustment system, motorized backgauge, and Rexroth hydraulic system, it delivers precise and efficient cutting performance. Standard Features - Throat Depth: 250 mm - Cutting Length: 4000 mm - Distance Between Columns: 4580 mm - Cutting Capacity: 16 mm - ELGO P40T 5.7” Touch CNC Control Unit - 5.7” TFT touch screen - Manual operation mode - Single-piece processing - Program memory - Digital outputs up to 2A - Automatic calculation of blade gap, cutting angle, and hold-down adjustment based on material - Automatic cutting program - Rear Sheet Support System with RTS Function - Automatic Blade Gap Adjustment System - Automatic calculation and adjustment according to the sheet thickness to be cut - Programmable Backgauge Return System - Automatic lifting for parts over 1000 mm - X-Axis Motorized NC Controlled Backgauge - X-axis travel distance: 1000 mm - Speed: 150 mm/s - Precision: ±0.05 mm - Steel frame - Hardened ball screw - Front Support Arms - Length: 1000 mm - Ruler - T-slot - Swing-away stop - Front Finger Guard (Openable) - 1000 mm openable front guard cover - Upper Blade - 2 cutting edges - 450 N/mm² capacity - Lower Blade - 4 cutting edges - 450 N/mm² capacity - Foot Pedal with Emergency Stop - Rear Safety System (EOS2E 2BX) - 2 laser beams - Type 2 – SIL1 safety level - 510 mm monitoring height - 3 ms response time - IP65 / IP67 protection class - Shadow Line Cutting Light - Ball Transfer Table - Schneider or Siemens Electrical Components (400V / 50Hz) - Premium Front and Rear Cabinet Guards - Rexroth Hydraulic System - Energy Saving Standby Mode Optional Features - Pneumatic Sheet Support System (Type 2 – 4 Position RTS Function) - 4-position pneumatic support system - Stable support for large sheets - Reduces sheet bending and deformation - RTS (Return To Sender) function - Enhances operator comfort and safety - Extended X-Axis Backgauge - 1250 mm - 1500 mm - Extended Front Support Arms - 1500 mm - 2000 mm - 3000 mm - Full-Length Openable Front Guard System Technical Specifications - Cutting Capacity (450 N/mm²): 16 mm - Cutting Capacity (700 N/mm²): 10 mm - Cutting Length: 4000 mm - Cutting Angle: 0.5° – 3.0° - Number of Hold-Down Cylinders: 18 - Cutting Speed / Fast Mode: 6 / 12 strokes per minute - Distance Between Columns: 4580 mm - Table Height: 1010 mm - Table Width: 700 mm - Throat Depth: 250 mm - Backgauge Stroke (X-Axis): 1000 mm - Machine Length: 5980 mm - Machine Width: 3750 mm - Machine Height: 2825 mm - Oil Tank Capacity: 390 L - Motor Power: 30 kW - Machine Weight: 21.5 Tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷 Iodpfx Aozbqzyohfsif

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), panjang langkah: 310 mm, kecepatan operasi: 8 mm/dtk, kecepatan mundur: 80 mm/dtk, tinggi meja: 1.055 mm, kedalaman tenggorokan: 510 mm, lebar kerja: 6.100 mm, gaya tekuk (maks.): 400 t, jarak antara penyangga: 5.100 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam system) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Iiedpox Nn Syefx Ahfof Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-V dies • Backgauge X distance: 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Tons) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank (L) 400 Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam system) Safety System Laser front safety Origin Turkey