Beli Cronosstech Hpb Nc 60-2100 bekas (26.616)

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 60 t, panjang langkah: 160 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 90 mm/dtk, kedalaman tenggorokan: 320 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, Standard Equipment Stroke: 160 mm Daylight (Lower – Upper Beam Gap): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Machine Features - Double-cylinder upper beam bending system - Steel main frame and upper beam construction for high static and dynamic rigidity - Upper beam movement supported by fiber slideways - High strength torsion shaft and eccentric bearing system for parallelism - Mechanically adjustable stroke within cylinder for motor-controlled angle setting - Wide operating opening suitable for use with various dies - Ton capacity adjustment and bottom dead center stop via NC control unit - Hydraulic safety system against overpressure - Dual-speed operation system featuring rapid approach, bending, and fast return - CE-compliant multifunctional foot pedal and emergency stop system - Compact hydraulic power unit with HAWE or Rexroth components - Remote service support with Siemens, Pizzato, and Balluff electrical components - LEUZE safety system and learning mode - NC control unit with memory for up to 500 programs and 200 steps per program - Easy program upload and download via USB - Standard upper and lower die set - NC-controlled, motorized backgauge on X-axis (600 mm) - Programmable, linear-guided backgauge system - 0.2 mm positioning accuracy - Motor-controlled Y-axis angle adjustment - Movable control panel Fedszcmbfjpfx Am Seph - Linear-guided front support arms - Lower die centering and clamping bolts - Programmable precise backgauge retract function Optional Equipment - Motorized R-axis - Special bending dies - Special foot pedal system with dual hand and foot operation - DSP or FIESSLER safety systems - Extended backgauge distance - Additional backgauge fingers - Additional front support arms - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 60 tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/sec Rapid Descent Speed: 90 mm/sec Throat Depth: 320 mm Daylight (Lower – Upper Beam Gap): 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X Axis Motor: 0.75 kW Y Axis Motor: 0.37 kW Optional R Axis Motor: 0.25 kW Backgauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 60 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is specifically designed for precise sheet metal bending applications, featuring a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Open Height (Daylight): 465 mm Fpodpfx Amozbrfao Ssh Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D touch graphic display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo-driven X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Precision: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis Backgauge Fingers 2 pieces Flat type 3 steps (10 mm / 20 mm / 30 mm) Manual Z-axis movement Anti-sag design for large sheets European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot option available based on tooling Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Metre Compatible with Amada Standard Lower Tool ES2067 4-channel V grooves (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Maximum capacity: 80 Tons/Metre Compatible with Amada B Series Open Frame Design Black plexiglass safety panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE-compliant electrical panel Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruler-based measuring system Operator support Optional Features Servo-driven X + R-axis Backgauge System Servo-driven movement for X and R axes X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhanced operator safety CE conformity Max operating distance: 4.3 metres Delem DA53Tx CNC Control Unit (15” Touch) 15” color touch screen 2D part drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and diagnostics Technical Specifications Bending Force: 60 Tons Bending Length: 2100 mm Distance Between Columns: 1600 mm Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, daya: 3 kW (4,08 hp), gaya penekanan: 30 t, panjang langkah: 150 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 70 mm/dtk, kedalaman tenggorokan: 255 mm, panjang pelat penekan: 1.270 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, Standard Equipment Stroke: 150 mm Daylight (Ram Opening Height): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Frames: 1010 mm Machine Features - Dual-cylinder upper beam bending system - Steel frame construction providing high static and dynamic rigidity - Upper beam movement supported by fiber slide bushings - High-strength balance shaft and eccentric bearing system supporting parallelism - Mechanically limited stroke system inside cylinders with motor-controlled angle adjustment - Large opening and high stroke for different tooling options - Easy tonnage adjustment and bottom dead center stop via NC control - Hydraulic safety system against overpressure - Dual-speed operation system: free descent, bending, and fast return - Multi-function foot pedal with CE-compliant emergency stop - Top-mounted compact hydraulic power unit with HAWE or Rexroth components - Siemens, Pizzato, and Balluff electrical components - LEUZE safety system and learning mode - NC control unit with memory for 500 programs, 200 lines per program - Program transfer via USB - Standard top and bottom tool set - NC-controlled motorized X-axis backgauge (500 mm) - Linear guide backgauge system - Positioning accuracy: 0.2 mm - Motor-controlled Y-axis angle adjustment - Movable control panel - Linear guide front support arms - Bottom die centering bolts Fodpfx Amjzcl S Ns Seph - Programmable precise backgauge retract function Optional Equipment - Motorized R axis - Special bending tools - Special pedal system with dual-hand + foot control - DSP or Fiessler safety systems - Extended backgauge travel - Additional backgauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 30 Ton Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Frames: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Fast Approach Speed: 70 mm/s Throat Depth: 255 mm Daylight (Ram Opening Height): 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X Axis Motor: 0.55 kW Y Axis Motor: 0.18 kW Optional R Axis Motor: 0.25 kW Backgauge Travel: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 100 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 40 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Uprights: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touch Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis travel Backgauge Fingers 2 units Flat type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Sheet sag prevention structure European Type Quick-Release Tool Clamping System (Promecam E7) Quick die change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Bottom Table 70 mm or 90 mm bottom table (bed) Fpjdpfx Amjzbrf Te Sjh T-slot can be applied according to tools to be used Standard Upper Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Compatible with Amada Standard Lower Die ES2067 4-way V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Compatible with Amada B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic manifold Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Integrated measuring scale Provides operator support Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motor controlled X and R axis motion X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE compliant Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touch graphic display 2D drawing and 3D product simulation User-friendly interface 1 GB hard disk Automatic bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Tons Bending Length: 2100 mm Distance Between Uprights: 1600 mm Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 40 t, panjang langkah: 160 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 90 mm/dtk, kedalaman tenggorokan: 320 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB NC 40-1550 – 40 x 1550mm Ton NC Hydraulic Press Brake The HPB NC 40-1550 Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for precise sheet metal bending applications with a 40-ton bending force and a bending length of 1550 mm. Its compact design, NC-controlled axes, high-rigidity steel frame, and user-friendly control system offer an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features - Stroke: 160 mm - Daylight Opening: 380 mm - Throat Depth: 320 mm - Bending Length: 1550 mm - Distance Between Columns: 1260 mm - Dual-cylinder top beam design - Steel frame and top beam with high static and dynamic rigidity - Adjustable top beam system with fiber glide supports - High-strength balancing shaft and eccentric bearing system to support parallelism - Motorized angle adjustment via in-cylinder mechanical stroke system - Wide stroke and daylight opening for versatile tooling - Easy tonnage and bottom dead point adjustment via NC control - Hydraulic safety system against overpressure - Dual-speed operation (free fall, bending, rapid return) - Multi-functional foot pedal with emergency stop complies with CE standards - Top-mounted hydraulic power unit with HAWE or REXROTH components - Electrical equipment by SIEMENS, PIZZATO, and BALLUFF - LEUZE safety system and learning mode - NC control unit with memory for 500 programs, 200 steps per program - USB data uploading and backup function - Standard upper and lower tooling set - NC controlled motorized X-axis backgauge system - 500 mm travel distance - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Front support arms with linear guides Fpjdszbq U Hjpfx Am Ssh - Lower die centering and fixing bolts - Programmable precise return function Optional Features - Motorized R-axis - Special bending tools and dies - Special dual-hand + foot pedal control system - DSP or FIESSLER safety systems - Extended backgauge system - Additional backgauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications - Bending Force: 40 Ton - Bending Capacity*: 4 mm - Working Length: 1550 mm - Distance Between Columns: 1260 mm - Stroke: 160 mm - Bending Speed: 10 mm/s - Rapid Descent Speed: 90 mm/s - Throat Depth: 320 mm - Daylight Opening: 380 mm - Table Width: 100 mm - Lower Table Height: 845 mm - Main Motor Power: 5.5 kW - X-axis Motor Power: 0.75 kW - Y-axis Motor Power: 0.37 kW - R-axis Motor Power (Optional): 0.25 kW - Backgauge Travel: 600 mm - Oil Tank Capacity: 120 L - Machine Length: 2000 mm - Machine Width: 1600 mm - Machine Height: 2235 mm - Machine Weight: 3450 kg This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 4 kW (5,44 hp), gaya penekanan: 60 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 1.250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A60-1250 CNC Hydraulic Press Brake is designed for precise sheet metal bending operations with a bending force of 60 tons and a bending length of 1250 mm. Thanks to features such as the ESA S630 CNC control unit, servo motorized backgauge system, compact frame construction, and professional tooling equipment, it ensures high accuracy and efficiency for workshops, metalworking companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight Opening (Upper–Lower Ram Distance): 415 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D touchscreen graphic display Manual bending sequence & collision calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X Axis Backgauge System X axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R axis travel: 190 mm Steel body construction Hardened ball screw spindle Hardened linear guideway system Optional 1000 mm X axis travel Backgauge Fingers 2 pcs Flat type 3 steps (10 mm / 20 mm / 30 mm) Manual Z axis movement Anti-sag design for sheet support European Type Manual Promecam Upper Tool Holder E7 Quick tool change Safe usage Drop-prevention design for tools CRONOSSTECH Special Narrow Lower Beam 70 mm or 90 mm lower beam T-slot available upon request Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Max. capacity: 100 T/m Compatible with Amada Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Fpodpfx Ajzbyu Nsm Sjh Max. capacity: 80 T/m Compatible with Amada A Series Open Frame Design CRONOSSTECH premium open frame Wide field of vision Ergonomic design Professional appearance Additional Equipment Single pedal system (P2) GIVI linear encoders Upper beam LED lighting Electrical panel to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height-adjustable Scale measurement system Operator assistance Optional Features AKAS II Front Safety Laser System + PLC + Rear Light Barriers Finger protection system Laser-based safety system Enhanced operator safety CE compliance Maximum operating distance: 4.3 meters Technical Specifications Bending Force: 60 Tons Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight Opening (Upper–Lower Ram Distance): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 2.600 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Uprights: 2150 mm ESA S830 CNC Control Unit (3-4 Axis) 10” 2D touchscreen graphic display Manual bend sequencing and collision control calculation Crowning correction calculation (Deflection compensation) Angle measurement and correction 2D drawing support 2 x USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel: 750 mm Speed: 250 mm/sec Accuracy: ±0.05 mm Manual R-axis travel: 250 mm Heavy-duty welded steel frame construction Hardened ball screw Hardened linear guideways Optional 1000 mm X-axis travel Back Gauge Fingers 2 pieces Flat type 3 positions (10 mm / 20 mm / 30 mm) Manual Z-axis adjustment Sheet sag prevention structure European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation User-friendly and time-saving design CRONOSSTECH Special Narrow Bottom Table Available as 70 mm or 90 mm wide T-slot can be machined for tooling requirements Standard Upper Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Bottom Die ES2067 4-way V-openings (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Fpedpfxozbyt Ss Am Sjh Black plexiglass safety panels Wide operator view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Control panel wired to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens inverter Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruled measuring system Operator support Optional Features CT-BEND Servo Motorized X + R-Axis Back Gauge System Servo-motorized movement of X and R axes X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm CNC-Controlled Motorized Crowning System MVD wedge-type and G.E.C. motorized system Automatic calculation via CNC Faster adjustment times Higher bending accuracy Extended machine life AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Enhanced operator safety Quick detection and response time CE compliant Maximum protection range: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Uprights: 2150 mm Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/sec Pressing Speed: 10 mm/sec Return Speed: 135 mm/sec Oil Tank Capacity: 170 L Machine Weight: 6430 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/sec Back Gauge R-Axis Speed: 250 mm/sec This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 15 kW (20,39 hp), gaya penekanan: 175 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 130 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 3.700 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB B175-3700 CNC Hydraulic Press Brake is engineered for precise and repeatable sheet metal bending operations, offering 175 tons of bending force and a bending length of 3700 mm. Standard Features - Stroke: 260 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm - Bending Length: 3700 mm - Distance Between Frames: 3200 mm - ESA S830 CNC Control Unit - 10” 2D touch screen - Manual bending sequence and collision control - Automatic crowning calculation - Angle measurement and correction - 2D drawing function - 2 USB ports - Offline software CT-BEND Servo Motorized Backgauge - X axis: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R axis: 250 mm - Hardened ball screw - Linear guide system - Optional X axis: 1000 mm Tool System - 2 rear backgauge fingers - European standard Promecam quick-release tool clamping system - CRONOSSTECH proprietary narrow lower beam - Eurostamp ES1260 upper tool - Eurostamp ES2067 lower tool - Amada-compatible tooling system Standard Equipment - B Series open frame design - GIVI linear scales - LED lighting - VDE electrical cabinet - Schneider or Siemens electrical components - HAWE hydraulic block - Eckerle pump - Siemens drive - Single pedal system - Energy-saving Standby function - 2 adjustable front support arms Optional Features - CT-BEND X+R servo motorized backgauge - AKAS II front safety laser system - PLC safety module - Rear light safety curtains - Delem DA53Tx CNC control unit - CNC controlled motorized crowning system - X axis extension to 1000 mm Technical Specifications - Bending Force: 175 Ton - Bending Length: 3700 mm Fpedpfozb Inksx Am Seh - Distance Between Frames: 3200 mm - Stroke: 260 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm - Table Height: 955 mm - Machine Length: 5300 mm - Machine Width: 2430 mm - Machine Height: 2990 mm - Approach Speed: 180 mm/s - Return Speed: 130 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Weight: 10,500 kg - Main Motor: 15 kW - X Axis Speed: 300 mm/s - R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 220 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 110 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 6.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB B220-6100 CNC Hydraulic Press Brake is engineered for precise, powerful, and repeatable bending of long sheet metal components, featuring a bending force of 220 tons and a bending length of 6100 mm. It is ideally suited for heavy industry, steel construction, energy, machinery manufacturing, and metalworking applications. The machine offers high efficiency, equipped with the ESA S630 CNC control unit, servo-motorized backgauge system, European-style tool clamping system, robust frame construction, and professional-grade components. Standard Features - Stroke: 260 mm - Daylight Opening (Open Height): 465 mm - Throat Depth: 410 mm - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - ESA S630 CNC Control Unit - 10” 2D touchscreen graphic display - Manual bend sequence and collision control calculation - Angle correction calculation - Angle measurement and correction - 2D drawing capability - 2 USB ports - Offline software - CT-BEND Servo Motorized X-Axis Backgauge - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Positioning accuracy: ±0.05 mm - Manual R-axis travel: 250 mm - Heavy-duty steel frame (body) - Hardened ball screw - Hardened linear guides - Optional X-axis travel: up to 1000 mm Tool Clamping and Backgauge Systems - 2 flat-type, 3-stage backgauge fingers - Manual Z-axis movement - European-style quick-release Promecam upper toolholder Fpedjzbyvtspfx Am Soh - CRONOSSTECH special narrow lower beam - Standard upper die ES1260, H: 67 mm, 85°, R: 0.8 mm - Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm - Amada-compatible tooling system Other Standard Equipment - B-series open frame design - Black plexiglass safety guards - Single foot pedal system - GIVI linear scales - Upper beam LED lighting - VDE electrical cabinet - Schneider or Siemens electrical components - Hoerbiger / HAWE hydraulic block - Eckerle pump - Siemens drive - Energy-saving standby function - 2 standard sliding front support arms Optional Features - AKAS II front safety laser system + PLC + rear light curtains - Delem DA53Tx 15” CNC control unit - Delem DA58Tx 18.5” CNC control unit - CNC-controlled motorized crowning system - X-axis extension up to 1000 mm - Additional front support arms - Additional backgauge fingers - Special bending dies Technical Specifications - Bending Force: 220 Tons - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 260 mm - Daylight Opening: 465 mm - Throat Depth: 410 mm - Table Height: 1060 mm - Machine Length: 7560 mm - Machine Width: 2570 mm - Machine Height: 3440 mm - Approach Speed: 150 mm/s - Return Speed: 110 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 20,000 kg - Main Motor Power: 22 kW - Backgauge X-Axis Speed: 300 mm/s - Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 270 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 3.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for heavy industry, steel construction, machinery manufacturing, and precision sheet metal forming applications, offering a bending force of 270 tons and a bending length of 3100 mm. Standard Features - Stroke: 260 mm - Daylight (Open Height Between Upper and Lower Beams): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axes) - 10” 2D Touch Graphic Screen - Manual bend sequence and collision control calculation - Automatic angle correction (crowning calculation) - Angle measurement and correction - 2D drawing support - 2 USB ports - Offline programming software - Servo Motorized X-Axis Backgauge System - X-axis travel: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Heavy-duty steel frame construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X-axis Backgauge Fingers - 2 units - Flat type - 3-stage (10 mm / 20 mm / 30 mm) - Manual Z-axis movement - Structure prevents sheet sagging European Type Quick Clamping System (Promecam Type) - Fast tool change - Secure locking system - User-friendly operation European Type Narrow Lower Table - 70 mm or 90 mm special lower table - T-slot can be applied depending on tooling requirement Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Maximum capacity: 100 Ton/Meter - Amada compatible Standard Lower Die ES2067 - 4-channel V openings (16-22-35-50 mm) - Die height: 60 mm - Die angle: 85° - Material: C45 - Maximum capacity: 80 Ton/Meter - Amada compatible B Series Open Cabin Design - Black plexiglass safety panels - Wide viewing area - Professional appearance - Ergonomic design Additional Equipment - Single pedal system (P2) - GIVI linear encoders - LED lighting on upper beam - Electrical panel in accordance with VDE standards - Electrical components by Schneider or Siemens - High-quality hydraulic block system - Eckerle hydraulic pump - Siemens main drive - Energy-saving standby function Front Support Arms - 2 standard sliding front support arms - Height adjustable - Metric ruler measurement system Optional Features - Servo Motorized X + R Axis Backgauge System - Servo controlled X-axis movement - X-axis travel: 750 mm - Accuracy: ±0.05 mm - R-axis travel: 250 mm Fedpfezbrc Sjx Am Ssph - Hardened linear guides and ball screw system - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - Motorized wedge system - Automatic calculation by CNC - Faster setup times - Higher bending accuracy - Longer machine lifespan - Front Safety Laser System + Rear Light Curtains - Laser-based finger protection - Improves operator safety - Fast detection and response - Maximum working distance: 4.3 meters Technical Specifications - Bending Force: 270 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Daylight: 465 mm - Throat Depth: 410 mm - Table Height: 960 mm - Machine Length: 4840 mm - Machine Width: 2500 mm - Machine Height: 3040 mm - Approach Speed: 150 mm/s - Return Speed: 120 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 12,300 kg - Main Motor Power: 22 kW - Backgauge X-Axis Speed: 300 mm/s - Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 4 kW (5,44 hp), gaya penekanan: 40 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 1.250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A40-1250 CNC Hydraulic Press Brake is engineered for precise sheet metal bending applications, offering 40 tons of bending force and a 1250 mm bending length. Equipped with the ESA S630 CNC control unit, servo-driven backgauge system, compact frame design, and professional tooling, it provides an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D Touchscreen Graphic Display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 x USB ports Offline programming software CRONOSS Servo Motorized X Axis Backgauge X axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R axis travel: 190 mm Steel frame construction Hardened ball screw spindle Linear guide system Optional 1000 mm X axis Backgauge Fingers Quantity: 2 Flat type 3-stage adjustable (10 mm / 20 mm / 30 mm) Manual Z axis movement European Style Manual Promecam Upper Tool Holder E7 Quick tool change Safe operation Design prevents die from falling CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table Optional T-slot upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Max capacity: 100 Ton/Metre Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Max capacity: 80 Ton/Metre A Series Open Front Panel Enclosure CRONOSS Premium open cabin Wide field of view Ergonomic design Professional appearance Single Pedal System (P2) Encoder Linear Scales Top Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-saving Standby Function 2 Sliding Front Support Arms Height adjustable Rule (scale) measurement system Operator support system Optional Features AKAS II Front Safety Laser System + Rear Light Barriers AKAS® II laser safety system Fpodpfjzbrcrox Am Soh Finger protection system Laser guard at punch height Enhances operator safety CE compliance Max working distance: 4.3 meters Technical Specifications Bending Force: 40 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 200 mm/dtk, kedalaman tenggorokan: 410 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending, featuring a bending capacity of 100 tons and a bending length of 3100 mm. Thanks to its ESA S830 CNC control unit, servo-driven backgauge system, high-rigidity frame construction, and professional tooling, it delivers high performance for metalworking and industrial production facilities. Standard Features - Stroke: 260 mm - Open height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axis) - 10” 2D touchscreen graphical display - Manual bend sequence and collision check calculation - Angle correction calculation (crowning) - Angle measurement and correction - 2D drawing support - 2 x USB ports - Offline programming software - CRONOSS Servo Motorized X-R Axis Backgauge System - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Robust steel frame - Hardened ball screw - Linear guide system - X-axis extendable up to 1000 mm (optional) - Backgauge Fingers: 2 units, straight type, 3 levels (10 mm / 20 mm / 30 mm) - Manual Z-axis adjustment - European Type Quick-Release Promecam Upper Tool Holder E7 - Quick tool change - Safe operation - Practical and ergonomic design - CRONOSS Special Narrow Bottom Table - 70 mm or 90 mm bottom table, depending on tonnage - T-slot available upon request - Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Max capacity: 100 Ton/Meter - Standard Lower Die ES2067 - 4-groove V-opening (16-22-35-50 mm) - Die angle: 85° - Die height: 60 mm - Material: C45 - Max capacity: 80 Ton/Meter - Series B Open Frame Cladding - CRONOSS premium open cabin - Black plexiglass safety panels - Wide field of vision - Ergonomic design - Single Pedal System (P2) - GIVI Linear Scales - LED Lighting - VDE Electrical Panel - Schneider or Siemens Electrical Components - Hoerbiger (HAWE) Hydraulic Block - Eckerle Hydraulic Pump - Siemens Drive - Energy saving standby function - 2 Standard Sliding Front Support Arms - Height adjustable - Ruler measurement system - Operator support system Optional Features - CT-BEND Servo Motorized X+R Axis Backgauge System - Fully automatic movement in X and R axes - Manual movement in Z1 and Z2 axes - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - CRONOSS wedge system - G.E.C. motorized structure - Automatic calculation by CNC - More precise and homogeneous bending - No operator intervention required - AKAS FPSC Front Safety Laser System + Rear Light Curtain Fpjdpezbrb Isfx Am Sjh - CE compliant safety system - Finger protection function - Maximum working range: 4.3 meters Technical Specifications - Bending Force: 100 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 905 mm - Machine Length: 4670 mm - Machine Width: 2230 mm - Machine Height: 2950 mm - Approach Speed: 200 mm/s - Return Speed: 135 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Machine Weight: 6780 kg - Main Motor Power: 7.5 kW - Backgauge X Axis Speed: 300 mm/s - Backgauge R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 55 kW (74,78 hp), gaya penekanan: 1.250 t, panjang langkah: 510 mm, kecepatan operasi: 6 mm/dtk, kecepatan mundur: 55 mm/dtk, kedalaman tenggorokan: 810 mm, jarak antara tiang: 7.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 1250 Ton 8.1 Metre CNC Press Brake – New / 12-Month Warranty Press brakes are heavy-duty industrial production machines designed for the precise, repeatable, and controlled bending of large-format sheet metal. The CRONOSSTECH 1250 Ton CNC Press Brake, featuring an 8,100 mm bending length and high tonnage capacity, is specifically engineered for heavy steel construction, energy sector, and large-scale industrial projects. Fpedpfx Ajyzb Hnjm Seh Key Advantages - High-precision bending over 8.1 meters - 1250-ton maximum bending capacity - Advanced automation with ESA S840W CNC control unit - Servo-motorized X+R axis precision backgauge - WILA motorized crowning system for uniform bending - Heavy-duty, high-strength machine frame Applications - Heavy steel construction - Energy sector and infrastructure projects - Shipbuilding and shipyard industries - Defense and heavy machinery manufacturing - Large-format sheet metal bending applications Standard Features - ESA S840W CNC control unit (3–8 axes) - 15.6” touchscreen, 2D graphics & offline programming - Automatic bending sequence and collision control - Angle measurement and automatic crowning correction - Servo-driven X + R axis backgauge system - High-precision linear guideways and ballscrew system - 2 backgauge fingers (3-position adjustable) - Promecam quick tool clamping system (E20) - Eurostamp standard punch and die set - D-Series full cabin safety enclosure - Dual foot pedal (up/down) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Parker pump - LED lighting and energy-saving mode - Heavy-duty front support arms - WILA motorized crowning system Technical Specifications - Bending Capacity: 1250 Tons - Bending Length: 8,100 mm - Distance Between Columns: 7,100 mm - Stroke: 510 mm - Open Height (Daylight): 775 mm - Throat Depth: 810 mm - Table Height: 750 mm - Pit Depth: 2,375 mm - Machine Dimensions (LxWxH): 10,600 x 3,650 x 4,500 mm - Approach Speed: 70 mm/s - Bending Speed: 6 mm/s - Return Speed: 55 mm/s - Oil Tank: 1,000 L - Motor Power: 55 kW - Weight: 136,000 kg Optional Features - Advanced multi-axis backgauge systems (4–6–8 axes) - WILA hydraulic tool clamping systems - Hydraulic punch clamping rolls - Widened table (for Multi-Vee dies) - 1,000 mm X-axis stroke - AKAS / DSP laser safety systems - Additional backgauge fingers General Information - Country of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 320 t, panjang langkah: 310 mm, kecepatan operasi: 9 mm/dtk, kecepatan mundur: 110 mm/dtk, kedalaman tenggorokan: 410 mm, jarak antara tiang: 5.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 320 Ton 6 Meter CNC Press Brake – HPB C320-6100 – New / 12-Month Warranty Press brake machines are essential equipment in sheet metal bending operations, providing high precision, repeatability, and production efficiency. Manufactured by CRONOSSTECH, the HPB C320-6100 CNC Press Brake is engineered for precise and stable processing of large-format sheets with a bending capacity of 320 tons and a bending length of 6100 mm. Key Advantages - High-precision bending over 6 meters - Advanced programming via ESA S840 CNC control unit - High-precision servo motorized backgauge system - Homogeneous bending with WILA crowning system - Heavy-duty frame with high stability - European origin hydraulic and electrical components Applications - Large-scale sheet metal bending - Steel construction manufacturing Fedpsyzb Ewofx Am Sjph - Energy and infrastructure projects - Machinery and equipment production - Industrial production lines Standard Features - ESA S840 (3-6 axis) CNC control unit - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angle measurement and automatic angle correction (crowning) - CRONOSS X+R axis servo motorized backgauge (±0.03 mm accuracy) - Hardened linear guide and ball screw system - Two adjustable backgauge fingers - Promecam quick clamping system - Eurostamp standard punch & die set - Full cover safety system - Dual foot pedal (up/down control) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic block, Eckerle pump - LED lighting, energy-saving mode - Front support arms (high-strength, adjustable) - Manual WILA crowning system Technical Specifications – HPB C320-6100 - Bending Capacity: 320 tons - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 310 mm - Daylight: 535 mm - Throat Depth: 410 mm - Table Height: 1065 mm - Machine Dimensions (LxWxH): 8150 x 2655 x 3170 mm - Approach Speed: 150 mm/s - Bending Speed: 9 mm/s - Return Speed: 110 mm/s - Oil Tank Capacity: 290 L - Motor Power: 22 kW - Weight: 27,000 kg General Information - Place of Manufacture: Turkey - Warranty: 12 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 60 t, panjang langkah: 500 mm, lebar meja: 600 mm, panjang meja: 800 mm, kedalaman tenggorokan: 250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable and stable performance in both workshops and production lines thanks to its compact design, robust frame, and precise operating capability. Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - Hydraulic and electrical components meet European standards - Long service life and low maintenance cost Applications - Metal forming - Deep drawing and forming processes - Cutting and punching operations - Assembly and pressing operations - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method - PLC control and touch panel - Argon welding applications - Certified welding (EN ISO 15614-1 / 2017, WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤ 120 micron/meter) - Hydraulic system by PARKER or REXROTH - Electrical components by SIEMENS / SCHNEIDER - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 60 - Pressing Force: 60 Ton - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm Fjdpfx Ajyzb Dmom Ssph - Table Size: 600 x 800 mm - Press Depth: 1150 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2500 mm - Main Cylinder Diameter: Ø175 mm - Motor Power: 7.5 kW - Weight: 5500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new, unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 110 mm/dtk, tinggi meja: 955 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 3.100 mm, gaya tekuk (maks.): 320 t, jarak antara penyangga: 2.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick tool clamping system • Sliding front support system • Manual crowning system (Original WILA wedge) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Rear gauge expansion from X+R to 4-6-8 axis options • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel die • Rear gauge X-axis up to 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge supports TECHNICAL SPECIFICATION VALUE Bending Force (Tons) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Lower-Upper Jaw Gap) (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank (L) 290 Machine Weight (kg) 14700 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedge) Fpedpfxox Nn Eae Am Sjh Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 18,5 kW (25,15 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 140 mm/dtk, kedalaman tenggorokan: 410 mm, lebar kerja: 3.100 mm, gaya tekuk (maks.): 220 t, jarak antara penyangga: 2.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo-motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick tool clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel dies • Backgauge X travel 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Frames (mm) 2600 Stroke (mm) 310 Daylight (mm) 515 Throat Depth (mm) 410 Fpodpfxex Nnzbo Am Seh Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank (Lt) 290 Machine Weight (kg) 11300 Main Motor (kW) 18.5 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 130 mm/dtk, tinggi meja: 935 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 3.100 mm, gaya tekuk (maks.): 175 t, jarak antara penyangga: 2.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo-driven back gauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam fast tool clamping system • Sliding front support arms • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Back gauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-groove tooling • Back gauge X travel up to 1000 mm • AKAS or DSP laser front safety system • Additional back gauge fingers • Additional back gauge brackets TECHNICAL SPECIFICATION VALUE Bending Force (Tons) 175 Bending Length (mm) 3100 Fpedpfx Amox Nn U Uo Sjh Distance Between Frames (mm) 2600 Stroke (mm) 310 Daylight Opening (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Press Speed (mm/s) 10 Oil Tank (L) 180 Machine Weight (kg) 9700 Main Motor (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 60 t, panjang langkah: 400 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 20 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 60/20 TON COLUMN-TYPE HYDRAULIC SPINNING PRESS General Description The CRONOSSTECH 60/20 ton column-type hydraulic spinning press is a rigid and compact press solution designed for precision metal forming, deep drawing, and spinning applications. Its four-column construction ensures stable maintenance of parallelism and perpendicularity tolerances throughout the pressing operation. The frame, manufactured from St52 grade steel, undergoes stress relief by vibration. Ram and pot systems can be controlled independently; stroke and pressure settings are precisely configured via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and an automatic lubrication system, this press ensures long service life, safety, and efficient operation. PLC-controlled architecture minimizes operator errors. This model provides an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid, four-column press frame construction - Independent stroke and tonnage control for ram and pot - Settings adjustable via touchscreen panel - High precision and repeatability - Low maintenance requirements, long service life Fields of Application - Metal spinning operations - Deep drawing processes - Die testing and prototype production - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened, hard chrome-plated shafts SLIDE BEARING: Bronze Zr14 RAM CAPACITY: 60 ton POT CAPACITY: 20 ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 400 mm POT STROKE: 100 mm MIN. CLEAR OPENING: 100 mm MAX. CLEAR OPENING: 500 mm WELD STRESS RELIEF: Vibratory stress relief WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE SPINNING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 Fpedpfx Asx N Ulgom Soh POT CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm MAIN CHARGING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via panel) RAM / POT STROKE & TONNAGE ADJUSTMENT: Adjustable via panel SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 ton Note on Production This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 110 mm/dtk, tinggi meja: 955 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 320 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge (X=750 mm, R=250 mm) with ±0.03 mm precision Fpsdpfex Nn I Ujx Am Sjh • European type Promekam quick tool clamping system • Sliding front support system • Manual crowning system (Original WILA cam) • Narrow lower table (European type) • GIVI linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove, V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options starting from X+R axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Back gauge X travel up to 1000 mm • AKAS or DSP laser front safety system • Additional back gauge fingers • Additional back gauge tongue TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (Daylight) (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 16800 Main Motor Power (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA cam) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), panjang langkah: 310 mm, kecepatan operasi: 8 mm/dtk, kecepatan mundur: 80 mm/dtk, tinggi meja: 1.055 mm, kedalaman tenggorokan: 510 mm, lebar kerja: 6.100 mm, gaya tekuk (maks.): 400 t, jarak antara penyangga: 5.100 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam system) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-V dies • Backgauge X distance: 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Tons) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Fpjdpfxex Nn Sys Am Ssh Pressing Speed (mm/s) 8 Oil Tank (L) 400 Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam system) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 18,5 kW (25,15 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 140 mm/dtk, tinggi meja: 965 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 220 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, STANDARD FEATURES CNC-controlled hydraulic press brake. CNC-controlled Y1 – Y2 – X – R axes (4 axes). CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display). Offline PC programming capability. Stress-relieved, heavy-duty steel frame. CNC-controlled synchronized cylinder system. 310 mm stroke. 410 mm throat depth. ±0.03 mm precision, servo-motor rear gauge. Rear gauge travel distances: X axis: 750 mm R axis: 250 mm Ball screw and linear guide rear gauge system. Sliding-type front support arms. Manual crowning system (wedge type). European style narrow lower table. European style quick-release upper tool clamping system (Promecam type). High-precision linear scales. Standard upper punch (H: 67 mm – 85° – R: 0.8). Standard lower die (60×60 mm – 4 V-channels: 16 / 22 / 35 / 50 mm). Front laser safety system. LED lighting. Foot pedal. Emergency stop buttons. CE-compliant safety equipment. OPTIONAL FEATURES 4 / 6 / 8-axis rear gauge systems starting from X + R. Extension of rear gauge X-axis stroke up to 1000 mm. Additional rear gauge fingers. Hydraulic upper and lower tool clamping systems. Motorized crowning system. Wider lower table for multi-channel dies. Front safety laser system (AKAS or DSP). Rear safety light barrier. CNC-controlled sheet front support systems. Automatic angle measuring system. Oil cooler or heater. Air-conditioned cooling system for electrical cabinet. Deep throat option. TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Fsdpex Nqqrofx Am Sjph Bending force: 220 tons. Bending length: 4100 mm. Distance between side frames: 3600 mm. Stroke: 310 mm. Daylight opening: 515 mm. Throat depth: 410 mm. Table height: 965 mm. Rear gauge axes: X = 750 mm / R = 250 mm. Approach speed: 180 mm/s. Working speed: 140 mm/s. Return speed: 10 mm/s. Main motor power: 18.5 kW. Oil tank capacity: 290 liters. Machine weight: approx. 13,650 kg. Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm.

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), panjang langkah: 310 mm, kecepatan operasi: 8 mm/dtk, kecepatan mundur: 80 mm/dtk, tinggi meja: 985 mm, kedalaman tenggorokan: 510 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 400 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • 4-axis CNC (Y1, Y2, X, R) (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge system) • Narrow lower table (European type) Fedpfxox Npals Am Soph • GIVI brand linear encoders • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Backgauge X-axis distance 1000 mm • AKAS or DSP laser light front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/sec) 100 Return Speed (mm/sec) 80 Press Speed (mm/sec) 8 Oil Tank (L) 400 Machine Weight (kg) 22500 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 5,5 kW (7,48 hp), gaya penekanan: 60 t, lebar meja: 590 mm, panjang meja: 800 mm, gaya punching: 60 t, lubang tembus di meja: 140 mm, diameter silinder: 40 mm, penyesuaian langkah: 100 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press; is a type of mechanical press driven by an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance, suitable for serial production. Fpedpfxevtx D Ns Am Soh Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready with PLC control + dual-hand/foot control Applications: - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide guideways • Nodular cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 normalized steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directive compliant • Double-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual-hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD panel (standard on 150–300 ton) • Hydraulic safety system (standard on 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of custom die as requested • Eight-sided slide guideways ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Die table–slide distance: 360 mm Ram–table distance: 395 mm Distance between uprights: 380 mm Ram adjustment (stroke regulation): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchor dimension: 630 mm Side anchor dimension: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die holder slot diameter: Ø40 mm Ram size: 340×220 mm Table height from ground: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please inform us if you require any changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2024, Diameter pipa (maks.): 60 mm, daya: 2,2 kW (2,99 hp), masa garansi: 12 bulan, kecepatan operasi: 45.000 mm/dtk, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 12 MONTHS Standard Equipment Self-memory NC Control panel provides professional and easy operation of the machine Capable of bending pipes up to Ø60mm x 4 mm Clamp fixture supports the pipe during fixation to the machine Pre-drilled holes for mounting special fixtures Welded steel construction body Thermal, power, and reset indicator lights Emergency stop button Machine has internal memory for 500 programs Minimum bending radius is 3 times the pipe diameter (Ø), depending on wall thickness and material Ø33.7 mm Standard 1 set of pipe dies included User manual Fjdpjvkua Uefx Am Seph MODEL NBM 60 Minimum Diameter mm 80 Maximum Diameter mm 320 Working Speed m/sec 3 Motor Power kW 2 Weight kg 250 Dimensions (L x W x H) 750 x 850 x 1050 Bending Capacity NBM 60 Heavy-Walled Pipe mm 60×4 Black Steel Pipe mm 48×4 Aluminum Pipe mm 60×8 Solid Round Bar (Black Steel) mm 40 Square Pipe (Black Steel) mm 40x40x4