Beli Dreher Dhd 30 520 bekas (25.963)

Kondisi: bekas, Tahun pembuatan: 2019, produsen pengendali: Sonstige, model controller: , Double Decoiler with Drive Design: Short version Strip width min./max.: 230 – 520 mm Max. coil weight: 2 × 30 kN Number of mandrels: 1 Outer coil diameter min./max.: 1,500 – 2,000 mm Expansion range min./max.: 460 – 525 mm Coil provision: Material handling vehicle Mandrel loading: From the front (operator side) Coil unwinding: From the underside of the coil Material: Aluminium, soft Strip thickness min./max.: 0.8 – 1.2 mm Tensile strength (Rm) min./max.: 100 – 250 N/mm² Max. strip cross-section: 600 N/mm² Straightening capacity: See straightening chart Strip speed min./max.: 2 – 10 m/min Strip entry height above floor: 2,100 mm Level of automation: Fixed / ± XXX mm Mode of operation: Jog mode, visual monitoring System Parameters Strokes per minute: 45 1/min Working direction: Right to left, loading from the front with forklift Levelness of installation site: ± 15 mm Supply voltage: 400 V, 50 Hz Ambient temperature: 20 – 40 °C Compressed air connection: 5 bar Mandrel : Double mandrel with drive : Expansion : - Manual knee-lever system with hand crank : Coil stop : 22.11.2019 : 22.11.2019 : - Single arms, manually adjustable by scale, locked at the front via quick-release lever and at the rear via clamping screws : Brake / Drive : - 2 asynchronous motors, frequency controlled : - 2 dual-circuit safety air disc brakes : Swiveling : - Manual, with locking by pedal 180° : Pneumatic hold-down rollers with rubberized rollers on top : Mounted on consoles. : Hydraulic expansion : - Hydraulic expansion instead of manual expansion with hand crank : - Hydraulic unit with mounted valves and piping on the mandrel head Bsdpfxeycnf Sj Am Ielg : Strip extraction and introduction, loop control : - Control via ultrasonic sensor/laser on the decoiler side

Kondisi: bekas, nomor mesin/kendaraan: 29156, 27781, Haspel Berat coil / kapasitas angkat: 2 x 4,5 t Lebar pita maks.: 520 mm Diameter luar coil: 1800 mm Rentang penjepitan: 460 - 525 mm Unit pelurus Lebar bukaan pita: 30 - 500 mm Jumlah rol pelurus: 11 buah Blodpevg Iqxofx Am Isg Diameter rol pelurus: 90 mm Jumlah rol penarik: 2 buah Diameter rol penarik: 90 mm Jumlah rol pemasukan: 2 buah Diameter rol pemasukan: 90 mm Tebal pita: 0,8 - 8,0 mm Kecepatan lintasan: 3 - 30 m / mnt Perlengkapan standar Perlengkapan tambahan Bantuan pemasukan jembatan loop

Kondisi: bekas, Tahun pembuatan: 2011, Decoiler Coil weight / load capacity: 4.5 t Max. strip width: 520 mm Coil outside diameter: 1600 mm Expansion range: 460 - 530 mm Straightening Unit Strip pass-through width: 20 - 400 mm Number of straightening rollers: 7 pcs Diameter of straightening rollers: 60 mm Number of pinch rollers: 4 pcs Diameter of pinch rollers: 60 mm Strip thickness: 0.4 - 3.5 mm Line speed: 2 - 10 m/min Roll Feed Bjdpfxouqfa Ij Am Ijlg Max. strip width: 310 mm Max. strip thickness: 3.0 mm Strip thickness at max. width: 2.8 mm Strip thickness at max. cross-section: 850 mm² Number of feed rollers: 2 pcs Diameter of feed rollers: 80 mm Max. feed speed: 104 m/min Drive power: 1.5 kW Standard Equipment Coil loading car Usable stroke: 500 mm Load capacity: 5,000 kg Max. strip width: 500 mm

Kondisi: bekas, TECHNICAL DATA Curing tank for oil hardening with circulation. Bsdpfx Ajug U Thsm Islg - Power: 0.25 [kW] - Voltage: 3 x 380 [V]

Kondisi: bekas, Plate turning device for loading and unloading panels. Working dimensions: Bledpfsrzhfpjx Am Iog * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Rotation direction: from crosswise to lengthwise. This device is commonly used in the woodworking and furniture industry to facilitate the handling of panels during processing. If you have any questions or require further information, please do not hesitate to contact us!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 8.463 h, kapasitas angkut: 3.000 kg, tinggi angkat: 3.300 mm, jenis bahan bakar: gas, tipe tiang: dupleks, tinggi konstruksi: 2.270 mm, produsen motor: toyota, tipe perpindahan gigi: otomatis, Perlengkapan: Penandaan CE, geser samping, pelindung depan, pelindung kepala, pencahayaan, Spesifikasi: Tipe forklift: Bensin/Gas Kode produk: 10852 Produsen: TOYOTA Model: 02-8FGJF35 (30) Tahun: 2016 Kapasitas angkat (kg): 3000 Tipe tiang: Ganda Ketinggian angkat (mm): 3300 Tipe transmisi: Otomatis Jam operasi: 8463 Negara: Prancis Berat (kg): 4760 Dimensi (P x L x T, mm): 2850 x 1310 x 2270 Tinggi konstruksi (mm): 2270 Aksesori forklift: Side shift, Pemanas, Kaca depan dan belakang Bljdpfxjyrcv Rj Am Ieg Catatan: Forklift telah diperiksa - kondisi teknis baik. Perawatan teknis lengkap akan dilakukan sebelum pengiriman forklift.

Kondisi: bekas, nomor mesin/kendaraan: XLK30122410029414, konfigurasi gandar: 3 gandar, pendaftaran pertama: 08/2001, suspensi: udara, ukuran ban: 385/65, kondisi ban: 30 persen, warna: lain, Tahun pembuatan: 2001, Perlengkapan: ABS,

Kondisi: baru, HARGA: 2300 EUR Laminator adonan meja Ital Form Dimensi: 2350x910x650 mm Ukuran sabuk konveyor: 500x1980 mm Jarak dengan rol yang dapat diatur: 1–40 mm Daya listrik: 0,55 kW Bsdpjuuh Iisfx Am Islg Tegangan: 380V 50Hz Berat: 130 kg

Kondisi: baru, HARGA: 2300 EUR Laminator adonan meja Ital Form Dimensi: 2350x870x620 mm Daya listrik: 0,4 kW Tegangan: 220V 50Hz Bledpfxouuhn Ae Am Iog Jarak dengan rol yang dapat diatur: 1-35 mm Berat: 150 kg

Kondisi: baik (bekas), Tahun pembuatan: 2010, gaya penjepit: 1.600 kN, Perlengkapan: dokumentasi / manual, Sumitomo Demag Systec 160/520 - Injection Unit 430 Clamping Unit Clamping force: 1600 kN Locking force: 1760 kN Max stroke: 500 mm Min. mold height: 275 mm Max. mold height: 585 mm (685 mm with WA) Max. daylight between platens: 1085 mm (1185 mm with WA) Platen size: 770 × 770 mm Tie bar spacing: 520 × 520 mm Max. mold weight: 2200 kg Max. load on moving platen: 1300 kg Max. load on fixed platen: 1700 kg Ejector Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN Injection Unit 430 L/D ratio: 20 Screw diameter: 40 mm Injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating capacity: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper capacity: 35 l Bljdpfoyarfdjx Am Iog MACHINE OVERALL Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total power: 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95-364 / 1.75-364 / 1.75-364 Machine weight (without oil): 6800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)

Kondisi: baik (bekas), Tahun pembuatan: 1980, diameter pembubutan di atas alas geser: 1.040 mm, diameter pembubutan di atas carriage atas: 710 mm, panjang pembubutan: 2.000 mm, lebar tempat tidur: 600 mm, HU-20240620-001 Blodpfx Amox Tgr Te Iog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Ref:11056 . 2000 Hunkeler VEA 520-K-HHS 3000 Mesin Penempel Endsheet. Untuk pengeleman lembar akhir kertas bagian dalam & luar, sisipan kartu ucapan, dan lem ditempel. Bjdpfx Amex Uwzns Islg Terdiri dari: 1 x unit pengumpan produk (lengan pengumpan cadangan untuk produk format besar) 1 x pengumpan lembar/kartu Penghitung lembar Sistem lem dingin PVA Sistem lem Robatech Meja pengeluaran Kompresor terintegrasi Pengaman sinar lampu I.R. Termasuk alat & aksesori. Spesifikasi: Ukuran produk, pengeleman luar, Maks: 520 x 310 mm Min: 100 x 70 mm penyisipan/tipping-in, Maks: 320 x 260 mm (dengan aksesori) Pengeleman offset (hanya untuk pengeleman luar): - Maksimum 50 mm dari lipatan - Tidak ada batasan arah gerak Kecepatan mekanis, Maks: 8.400 siklus/jam.

Kondisi: siap digunakan (bekas), Heidenhain LS 706 batang pengukur panjang ML 520 mm Id. 277 504 18 SN:6304918F + AE LS 706 kepala pembaca . 276 504-31 , barang telah direkondisi total, bekas, terdapat tanda-tanda pemakaian normal, 100% berfungsi, ruang lingkup pengiriman sesuai foto. Bljdsx Er Idjpfx Am Iog

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 528 kW (717,88 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 3.098 kg, tegangan masuk: 400 V, lebar total: 2.300 mm, panjang total: 4.800 mm, tinggi total: 2.350 mm, daya: 267 kW (363,02 hp), arus masuk: 434 A, jenis perlindungan (kode IP): IP44, frekuensi input: 50 Hz, tekanan (maks.): 44,2 batang, Perlengkapan: Pelat tipe tersedia, unit pendingin, Unit pendingin Carrier Kapasitas pendinginan: 164 - 528 kW Blsdpfoyb E Uujx Am Isg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 75 kW (101,97 hp), Stein- und Erzbrecher (Backenbrecher) für den Einsatz in Steinbrüchen und im Bergbau Modell: PE600X900 Maximale Aufgabengröße: 500 mm Leistung: 80-135 t/h Motor: 75 kW Gewicht: 15 t Bjdpfsq H Shcox Am Ielg Neben diesem Modell bieten wir auch weitere Modelle wie PE900X1200, PE500X750, PE250X400, PE400X600 usw. an. Zusätzlich führen wir auch Prallbrecher, Kegelbrecher, Hammerbrecher, VSI-Brecher und können komplette Anlagen zur Aufbereitung und Absiebung von Gestein mit einer Kapazität von 30–1000 t/h liefern. Kontaktieren Sie uns gerne für weitere Informationen, falls Sie ein anderes Modell oder eine andere Brecherart benötigen. Sie können uns auch eine Nachricht hinterlassen, wenn Sie ein anderes Modell oder einen anderen Brechertyp wünschen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Dijual agregat lem profesional Robatech RoBa 30, buatan Swiss (Robatech AG CH-5630 Muri). Perangkat dalam kondisi kerja penuh, lengkap, dan siap digunakan. Ideal untuk lini pengemasan, gluing-folding machines, case erectors, serta mesin yang memerlukan aplikasi lem panas presisi. Spesifikasi teknis: * Model: RoBa 30 * Tahun produksi: 1984 Blodpfoum Hufex Am Iog * Kapasitas: 900 g/menit * Tekanan hidrolik maks.: 40 bar * Tekanan udara maks.: 5 bar * Suhu operasi maks.: 200°C * Daya: 240 V * Konsumsi arus: 10 A * Rasio pompa: 1:8 * Label identifikasi jelas, manometer berfungsi Kondisi: * perangkat dalam kondisi teknis baik * lengkap, tanpa kekurangan * kualitas Swiss – konstruksi sangat tahan lama

Kondisi: sangat baik (bekas), Professional granulator by German manufacturer Dreher – model S 26/26 GFS-SPEZIAL. The machine is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, easy service access, and a control cabinet with emergency stop button. The installed 3-phase low-speed motor provides high shredding power and stable operation. • Motor power: 7.5 kW • Supply voltage: 400 V 50 Hz • Speed: 1500 rpm Blodpfx Aovyumyjm Isg • Throughput suited for medium and large injection molding machines • German build quality • Durable frame and cutting assembly Condition: very good, mechanics inspected, ready for operation.

Kondisi: bekas, daya: 160 kW (217,54 hp), Mesin Pemotong DREHER 26/90 / Mesin Pemotong Blsdpoy Ic Nwjfx Am Iog Mesin ini dilengkapi dengan pisau yang diasah dan cocok digunakan sebagai mesin penggiling untuk sisa punch dan gulungan film. Data mesin: Penggerak: 7,5 kW Pisau rotor: 5x3 Pisau stator: 2x2 Diameter rotor: 260 mm Lebar rotor: 900 mm Dengan penarik rol

Kondisi: bekas, daya: 160 kW (217,54 hp), Mesin Pemotong DREHER 26/90 / Mesin Pemotong Mesin ini dilengkapi dengan pisau yang diasah dan cocok digunakan sebagai mesin penggiling untuk sisa punch dan gulungan film. Data mesin: Penggerak: 7,5 kW Pisau rotor: 5x3 Pisau stator: 2x2 Diameter rotor: 260 mm Lebar rotor: 900 mm Dengan penarik rol Bljdpsy Icgvsfx Am Ieg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 120 kg, panjang total: 900 mm, lebar total: 1.500 mm, tinggi total: 2.050 mm, tegangan masuk: 230 V, daya laser: 30 W, panjang gelombang laser: 1.064 nm, akurasi pengulangan: 0,01 mm, jenis laser: laser serat, Perlengkapan: Port USB, pencahayaan, The versatile LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser enables the marking of nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser for permanent marking has become essential. The powerful laser software allows users to easily create text, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software is also capable of automatically serializing numbers and part numbers after initial setup. Moreover, it can retrieve variable data (such as drawing numbers and project designations) from existing spreadsheets and automatically transfer this information into predefined fields. Integration of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long components, motorized Z-axis, drawer systems, and more, are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking area 150x150mm (larger sizes available as an option) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system for automatic focus distance determination • Optional: extraction system (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) Bodpfxsyxccrs Am Iolg • Focus finder for easy focus adjustment • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminium profile • Air-cooled • Door width approx. 700mm / door pass-through height: 400mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Arburg 520S 1300-800 / Machine in Very Good Technical Condition Year of Manufacture: 2008 Injection Unit: - Screw diameter: 50 mm - Injection weight: 359 g - Injection pressure: 2000 bar - Dosing volume: 392 cm³ Clamping Unit: - Clamping force: 130 t - Tie bar distance: 520 x 520 mm - Platen size: 695 x 695 mm - Ejector: hydraulic - Clamping unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: - Machine in very good technical condition - Euromap 67 - Euromap 12 - Robot interface - Air valve x 2 - Injection unit hardened - bimetallic - The machine has been regularly serviced by authorized Arburg service in Germany Dimensions: - Weight: 6,450 kg - Length/Width/Height: 4.81 x 1.57 x 2.19 m Drive: - Pump/Motor: 30 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Bsdpfx Amey Dqvko Ielg Price: On request

Kondisi: sangat baik (bekas), 7026 Blodpsyk Hfasfx Am Isg

Kondisi: sangat baik (bekas), Nomor katalog 7374 Bsdjy At Nqepfx Am Ielg DATA TEKNIS - Ukuran hopper pengisian atas (panjang/lebar): 840x620 mm - Ukuran hopper pengisian bawah (panjang/lebar): 300x300 mm - Lebar rotor: 340 mm - Motor: 22 kW - Saringan: 15 mm - Jumlah pisau: 6 unit - Outlet kayu cincang: diameter 160 mm - Dimensi (panjang/lebar/tinggi): 1400x800x2000 mm - Berat: 840 kg KEUNGGULAN – Produksi Jerman – Kondisi sangat baik – Mesin penghancur kayu bekas Harga netto: 23.900 PLN Harga netto: 5.690 EUR (tergantung kurs 4,2 EUR) (Harga dapat berubah mengikuti fluktuasi nilai tukar)

Kondisi: sangat baik (bekas), Nomor katalog 6726 DATA TEKNIS - Inlet corong pengisian: 280x300 mm - Outlet kayu hasil pencacahan: Ø 310 mm Blsdjignt Uopfx Am Iog - Lebar kerja rotor: 340 mm - Motor utama: 22 kW - Jumlah pisau: 6 buah - Dimensi (P/L/T): 1300x1150x1680 mm - Berat: 720 kg KEUNGGULAN – Kondisi sangat baik – Mesin pencacah bekas Harga netto: 19.900 PLN Harga netto: 4.740 EUR Harga netto dihitung menurut kurs 4,2 PLN/EUR (dalam hal fluktuasi kurs yang signifikan harga dapat berubah)

Kondisi: bekas, We are offering used grating panels for sale. TECHNICAL DATA Dimensions: 1,110 x 975 x 30 mm Mesh size: 30 x 30 mm Surface: galvanized Condition: used PRICE €162.00 net per unit (10 pieces) €192.78 gross incl. VAT Available quantity: 89 pieces YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. Additional costs depend on the delivery location and shipment size and can be provided upon request. PROJECT PLANNING Our sales team is happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon on conclusion of the order. The listed price is per piece/net price or as specified in the description (plus VAT). You will, of course, receive an invoice stating the VAT separately. ABOUT US The company DLK in Nordhorn supplies new and used products in the fields of warehouse logistics, conveyor technology, mezzanine platforms, textile storage as well as machinery for trade, industry, and crafts. Bodpfx Amoy H Hfge Islg We continuously offer a wide range of attractive second-hand deals from various manufacturers/brands. If you have any questions, feel free to contact us. Four pillars – The cornerstones of DLK: Storage Technology | Levelmaker® | Logistics | Solutions