Beli Eisele Gergaji bekas (4.600)

Tahun pembuatan: 1998, Kondisi: bekas, Long-cut saw for cutting aluminium profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed pusher stroke: 6,200 mm The machine is currently dismantled and stored in our warehouse. Cgjdpfx Aowx I Hvem Ist Further technical data available on request.

Kondisi: bekas, Saw Eisele VMS III PV Cgsdpfx Aewmk Hbem Iot Further information will follow.

Tahun pembuatan: 2004, Kondisi: bekas, de982b7c Cgedpfx Aoxn Iq Djm Iot

Tahun pembuatan: 2009, Kondisi: bekas, Aluminium cutting system with 2 saw motors, each capable of performing independent 45° cuts. Cgjdpfjqzmnujx Am Iot Material feed unit accommodating up to 8,100 mm. Cross conveyor, discharge table, chip conveyor, and extraction unit included. Soundproof enclosure. Control via Siemens S7 panel. Operating manual and additional documentation available; further technical details on request. The machine was operational up to the point of dismantling. Further technical specifications available on request or see photos.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1966, For sale: German-made circular saw, Eisele brand, model VMS II, in good condition. Csdpfx Amjvbwfnj Ijgt

Kondisi: baik (bekas), Tahun pembuatan: 2002,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Tahun: 2017 - secara teknis efisien, siap digunakan – setelah servis penuh - kepala terpisah - penggerak pneumatik Cjdsy Naz Tjpfx Am Ijgt - tinggi profil maksimum: 160 mm - unit resistansi diturunkan di bawah meja - kunci hidrolik untuk membalikkan unit resistansi

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), Mesin penyambung sudut PRESSTA EISELE PV-10P bekas, tahun 1993 Merek: Mesin penyambung sudut aluminium PRESSTA EISELE PV-10P Model: PRESSTA EISELE PV-10P Deskripsi: MESIN PENYAMBUNG SUDUT ALUMINIUM PRESSTA EISELE PV-10P, kondisi teknis: berfungsi dengan baik, mesin tidak dilengkapi 2 pedal pneumatik yang perlu dibeli dan dipasang, sistem pneumatik berjalan tanpa masalah. Terdapat juga 2 lengan yang telah dilepas dari mesin (persiapan untuk proses pengecatan). Mesin dapat diuji dalam waktu singkat di lokasi. Setelah kedua pedal terhubung, mesin berfungsi 100%. Codpfjy I Sm Sjx Am Isgt Peralatan dijual karena likuidasi perusahaan. Perangkat dirawat secara berkala, siap untuk digunakan. Tahun: 1993

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, EISELE besar sepenuhnya hidraulik: berat sekitar 0,75 ton, mata gergaji 440 mm Kecepatan putar: 12,5 / 25 rpm Cgodpfx Amoy Ncfuj Ijt Daya motor: 2,6 / 3,2 kW Umpan potong hidraulik Rahang penjepit hidraulik Kapasitas potong: 200 x 100 mm (pipa persegi) Kemiringan potong satu sisi 45°.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, diameter mata gergaji maks.: hingga 300 mm Bagian atas mesin dapat diputar: 45°-90°-45°-30° Diameter potong pada 90°: 100 mm Pipa kotak: 85 x 85 mm Profil datar, berongga: 130 x 85 mm Rentang putaran: 40 / 80 rpm Daya penggerak: 1,0 / 1,2 kW Dimensi mesin P x L x T: 650 x 600 x 1650 mm Berat: 185 kg Aksesori / Fitur Khusus: Cgedpjy E Ullofx Am Iot • Panduan vertikal kepala gergaji • Fitur pemotongan miter, stepless 45°-90°-45°-30° • Roller conveyor K + K, panjang sekitar 1 m masing-masing • Pendorongan manual • Sistem pendingin cairan • 1 pcs. mata gergaji • Konformitas CE VMS 300 dalam kondisi sangat baik ini berasal dari bengkel pelatihan. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Jerman

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Behringer VMS 370 A sangat terawat, termasuk meja rol masukan dan keluaran. Mesin sekarang tersedia di gudang, sudah direkondisi dan siap dikirim segera. Cgodpfx Amey Edcye Ijt

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operation via foot valve ■ Maximum stroke length: 40 mm ■ 25 double strokes per minute ■ Maximum installation height: 250 mm ■ Throat depth: 130 mm Cjdpoy Hriwjfx Am Iogt ■ Throat depth with rotary table: 90 mm ■ Table height: 950 mm ■ Ram force: 90 kN at 10 bar

Kondisi: bekas, 1 unit mitre saw EISELE VMSA-LO Tegangan: 380 Volt, di atas palet Warna: sesuai gambar, berdasarkan foto dan peninjauan Kondisi: bekas Cedpfx Aoy D Nbxjm Iegt Lokasi barang: gudang Metode pembayaran: pembayaran di muka melalui transfer bank Pengiriman: Hanya penjemputan sendiri di lokasi Ditzingen-Heimerdingen

Kondisi: sangat baik (bekas), Mesin penyambung sudut Pressta Esiele PV10 P pengiriman dalam UE ~350 euro Cgedpol Skl Iofx Am Ist

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Gergaji Ausklink untuk pemotongan sudut dan pemotongan miring. Mesin ini memiliki 2 diameter mata gergaji masing-masing 500 mm. Dilengkapi dengan alat penjepit pneumatik. Gerakan maju bersifat hidropneumatik dan dioperasikan dengan kendali dua tangan. Pemberhenti material dapat diputar dengan titik pengunci serta dilengkapi tampilan digital. Tinggi dan sudut potongan dapat disetel secara motorik dan dilengkapi tampilan digital. Cedpfx Aoyzcpdjm Ijgt Maks. tinggi profil: 280 mm Maks. lebar potongan: 300 mm Maks. tinggi potongan: 185 mm Maks. kedalaman potongan: 185 mm

Kondisi: bekas, Tahun pembuatan: 1990, saw_300mm_kaltkreissaege Cgodpfjy Ehx Esx Am Ijt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1587 / 1588, diameter mata gergaji: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. Punching is performed vertically from above, with punch tool cassettes accommodating up to 8 profiles simultaneously. Material Feed: The material is fed via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per stroke. Control System: Modern versions are often equipped with a Siemens S7 control unit featuring a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and offers the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on equipment). Dimensions (Saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also customized financing options tailored to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. Cgedpfx Ajyyz Txom Iot 📞 Feel free to contact us for further information or a non-binding offer. We will advise you personally and professionally. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1589 / 1590, diameter mata gergaji: 500 mm, Fully automated sawing and punching machine for aluminum and plastic profiles The Profilma 502 ST-V combines precision sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex operations, and processing bundled materials. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Up-cut saw motion, motorized feed Csdeyyz Ebjpfx Am Isgt - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round shaft guidance - Minimum offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punching unit (discharge side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2–3 seconds - Punch scrap ejection into frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2 × 3-liter tanks and fill level indicator - Soundproofing package: hood and saw blade guard insulated inside - Roller conveyor (740 mm) with reach-in guard on feed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety cover - Saw blade housing below tabletop Max. cutting capacity: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailored financing options designed to suit your needs. Whether down payment, installments, or individual financing models—we will find the right solution together. On request, we also handle complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you do not need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1591 / 1592, diameter mata gergaji: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic pass-through process. Based on the Profilma 502 model, it is specially optimized for high-volume applications and combined operations—including the processing of entire profile bundles. Control is via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router allows secure remote access via VPN. Up to 10 punching positions can be programmed per job. The horizontal punching unit can be deactivated as required. Saw range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Continuously variable speed adjustment - Saw cut from below, motorized feed - Material feed: 3–800 mm, reversing up to 4,000 mm - Ball screw with servo drive and round shaft guide - Offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical and horizontal hydraulic punching unit (output side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke continuously adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punching scrap is discharged laterally from the machine frame - Conveyor belt 250 × 800 mm for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free connection for extraction control - Minimum quantity lubrication system with two 3-liter tanks and fill-level display - Noise protection package: hood and internal blade guard sound-insulated Cgsdpfxjyyzxho Am Ijt - Roller conveyor (740 mm) with reach-in protection on feed side - Robust stationary frame, working height: 960 mm - Manually opening protective hood - Saw blade housing under the table Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available. ---- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailored financing solutions to suit your needs. Whether it's a down payment, installment plan, or custom financing models—together we'll find the right solution. On request, we can also take care of the entire transport organization. From planning to reliable delivery, we ensure smooth and timely handling so you don’t need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We will be happy to provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 171982, diameter mata gergaji: 350 mm, diameter utama gergaji: 350 mm, Kami menawarkan gergaji potong bekas EISELE LMS 350 P ini, tahun pembuatan 1994. Pabrikan: EISELE Model: LMS 350 P Nomor seri: 171982 Tahun pembuatan: 1994 Tegangan: 380 V Dilengkapi pengoperasian melalui tombol ganda dan penjepit pneumatik Cgsdey D H Dwepfx Am Ijt Dilengkapi dengan mata gergaji kayu Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirim pesan atau menghubungi kami.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Maximum profile width 270 mm, Siemens S7 control with touch display incl. piece counter Includes CPU 315 and a Flexisoft, quantity multiplier for processing material bundles Cycle time indication in seconds, chain dimensions, includes reversing device for sections up to max. 4 m length Automatic shut-off via limit switch at the end of the material, error diagnosis, incl. IXON router for VPN connection, see data sheet Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device from bottom to top, on both infeed and outfeed sides of the saw head, cutting gap expansion on both sides of the saw blade, electronic material feed unit, 800 mm feed length, with ball screw spindle and servomotor, including pneumatic horizontal and vertical clamping units. The profile support area in the feed section is equipped with a lift/lowerable roller, minimum remainder length from 75 mm (profile-dependent), horizontal and vertical clamping pressure reduction with 6 pressure regulators, cycle spray device with level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame lined with insulation mats on the inside 2 extraction nozzles Ø 100 mm, safety guard over the saw head and the feed unit, 740 mm roller conveyor with reach protection on the infeed side, 450 mm Pertinax table top with reach protection on the outfeed side Cgodpfsy Dtpmex Am Iot Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be swung out for easy emptying 2 outlets with 100 mm hose adapter, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow 2,600 m³/hr, negative pressure 30 mbar, with fan snail housing above the extractor Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 db (A) Selector switch for continuous operation or operation controlled by the saw, without electric cable, paintwork: RAL 7035 / 9016

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, 2013 metal circular saw. This PRESSTA EISELE Profilma 400 V features a Ø400 mm saw blade diameter and a powerful motor with approx. 12 kW output. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V we have for sale. Please contact us for further details on this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations Cgedpfx Asyyxxfsm Ijt • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Saw feed direction: Linear feed from top to bottom • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repeat strokes for longer cut lengths • Material separation: Before saw blade retraction (no post-cutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force individually adjustable; interchangeable plastic/PVC jaws • Control: PLC-based; operation via control panel with display • Features: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostic and error messages; machine status display • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor power: up to 22 kW (multi-stage motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction system (to connect to Ø100/Ø160 mm ports)

Kondisi: baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Type: VMS III - PV Machine No.: 8518 Year of Manufacture: 1980 Technical Data: Saw motor, 2-stage: 2.0 / 2.6 kW Saw blade: 350 mm Cgodpfxoy Dcmbo Am Ist 4 cutting speeds: 8.5 / 17 / 34 / 68 rpm Clamping range, flat/round: 200 / 120 mm Feed length, single stroke: 5 - 600 mm Feed length, double stroke: 1200 mm

Kondisi: bekas, Tahun pembuatan: 1971, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3229, jenis arus masuk: tiga fasa, kecepatan rotasi (min.): 35 rpm, kecepatan rotasi (maks.): 70 rpm, tegangan masuk: 500 V, Dijual: mesin gergaji lingkaran logam yang kokoh dari produsen Eisele, model VMS III. Mesin ini merupakan gergaji dingin klasik untuk penggunaan industri, terkenal karena konstruksinya yang stabil dan daya tahannya. Ideal untuk bengkel, konstruksi logam, atau bengkel las. Data Teknis: • Produsen: Eisele • Tipe: VMS III • Tahun pembuatan: 1971 • Nomor mesin: 3229 Cgedpjy Dc I Sefx Am Ijt • Kecepatan putar: 35 / 70 rpm • Tegangan: 500 V • Daya motor: sekitar 1,8 hingga 2,6 kW • Frekuensi: 50 Hz • Versi: tiga fase • Dilengkapi dengan ragum dan umpan mekanis Kondisi: Bekas pakai, sesuai usianya. Mesin dibangun sangat kokoh, cocok untuk direkondisi atau langsung digunakan. Secara visual terdapat tanda-tanda pemakaian.

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), Fungsionalitas: tidak berfungsi, Mesin punching hidrolik kompak dengan rangka C dan gaya punching 160 kN untuk aplikasi presisi pada penampang profil yang lebih kecil. Konstruksi rangka yang kaku terhadap puntiran memastikan hasil punching yang akurat pada aluminium, baja, atau plastik. Cjdoy Agqnopfx Am Isgt