Beli Grieser Disolver Laboratorium Berdiri bekas (1.949)

Kondisi: sangat baik (bekas), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser Laboratory Stand Dissolver Type: GFD 11 LST Intended use: This machine is designed for mixing powdered solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from low-viscosity to pasty materials. Machine Design: The laboratory stand dissolver essentially consists of the machine stand, lifting device, drive for the mixing tool, telescopic hood with spring-pressure closing, clamping chuck, and control cabinet (not Ex-rated) with controller and compact controller. In the operating position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, serving its purpose according to the application. The mixing tool drive is equipped with variable speed control via frequency converter. The arrangement, power ratings, and speeds of the motors can be found in the attached project drawing. On the compact controller display, the mixing tool speed, mixing time/remaining mixing time, mixing sequences, and other functions can be displayed. Operation Switching on and off is performed using the appropriate buttons on the control cabinet. Raising the mixing tool drive Raising is performed by activating the lifting motor. It operates only while the push-buttons (two-hand safety control UP-UP) are pressed. Releasing the buttons stops the arm at any desired height. Lowering the mixing tool drive To lower the arm, the appropriate buttons (two-hand safety control DOWN-DOWN) must be pressed on the control panel. Mixing tool change The mixing tool shaft features an M8 connection thread. Depending on requirements, the mixing tool (customer-supplied stirring star) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Bdedpfx Afszdtfljpeg Control voltage: 24 V DC Mixing tool speed: 25 – 500 rpm via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring star, customer-supplied Operating panel / Display The machine is predominantly operated via the compact PLC controller “Vision 560-T25B.” Safety-related functions, such as main switch disconnection, emergency stop activation, and two-hand operation for opening/closing the mixing chamber, are excluded from this. The operating panel consists of a backlit LCD display and membrane click buttons. The letter-marked buttons are assigned fixed functions, which can be activated at any time regardless of the menu. Once a function is activated, the relevant status appears in the upper right section of the “Operating Display” menu screen. The M up and down buttons allow the user to scroll through the menu pictures. Type: GFD 11 LST Condition: used Scope of delivery: (see picture) (Technical data and specifications may change and are subject to errors!) We will be happy to answer further questions by phone.

Kondisi: bekas, Fungsionalitas: belum diuji, nomor mesin/kendaraan: LD 50, Dissolver laboratorium Pendraulik LD 50 bekas Pabrikan: Pendraulik-Ruhrwerk Bodoxp Hw Espfx Afpjdg Model: LD-50 Maks. 8400 rpm

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), A complete Grieser vacuum dissolver plant for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75 kW, mixing shaft speed: 1500 rpm, total volume: 550 l, mixing volume: 400 l, mixing tool diameter: 450 mm, vacuum capacity: 160 m³/h, weight: approx. 2800 kg. 2) Grieser FB 2000 fluidization vessel, year of manufacture: 2009, total volume: 2000 l, usable volume: 1300 l, discharge rate: 10 l/min, outlet speed: 0.9 m/s, weight: approx. 2000 kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000 l. 5) Radial fan V30/2, air flow: 410 m³/h. Documentation available. On-site inspection is possible. Bsdpfx Aowtg Ihefpodg

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A Grieser pilot plant vacuum dissolver for high-viscosity liquids is available. Volume: 150 L, dissolver power: 22 kW, vacuum pump power: 2.2 kW, toothed disc diameter: 250 mm, disc speed: 1800 rpm. Includes hydraulic power unit for lift column, feed hopper, sight glass with lamp, product temperature sensor, explosion-proof design, and control cabinet with inert gas purging. Documentation is available. On-site inspection possible. Bdsdsucw Tpepfx Afpsg

Kondisi: bekas, GRIESER Model: VPL 3.0 Total mixing chamber volume: 3.0 liters Usable volume: 0.3 to 2.0 liters Pressure in mixing chamber: 0 to 1.2 bar abs. Pressure in stainless steel double jacket: N/A Critical speed: 1800 rpm Speed range under load: - Paddle mixer: 38–282 rpm - Scraper: 9–90 rpm Rated voltage: 3/PE/50Hz, 400V; L/PE/N/50Hz, 230V Control voltage: 24V DC Bjdszix Ehspfx Afpsdg Power: 1.3 kW Rated current: 5.0 A Main switch: 32 A Fuse protection: 16 A Weight: 250 kg Ex works sale! Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) For further questions we are happy to assist you by phone.

Kondisi: bekas, en-001 Bjdpfx Aeyma E Ejfpjdg

Kondisi: bekas, Tahun pembuatan: 2011, Panjang pemotongan: 4300 mm Tinggi pemotongan (vertikal): 2240 mm Tinggi pemotongan (horizontal): 2100 mm Kedalaman pemotongan: 80 mm Motor gergaji: 5,5 kW Diameter mata gergaji: 300 mm Kecepatan putaran: 4750 RPM Lubang penyedot debu: 1x 160 mm Dimensi: 5535 x 1500 x 2901 mm Berat: sekitar 900 kg Lokasi penyimpanan: Pemasok Bedpjzxqffofx Afpsdg

Kondisi: bekas, Tahun pembuatan: 1992, lebar pemotongan maks.: 5300 mm, tinggi pemotongan maks.: 2200 mm, diameter pisau: 300 mm, ketebalan pemrosesan maks.: 80 mm, lubang pisau: 30 mm, penopang bawah: rol tetap, kemiringan kepala gergaji: manual, pengumpanan gergaji: otomatis, penghisap: penghisap eksternal, berat kira-kira: 1500 kg, daya motor: 5,5 kW Lokasi gudang: Nattheim Bedpevvkq Tefx Afpsdg

Kondisi: bekas, Lokasi gudang: Nattheim Bsdovvkrdopfx Afpodg

Kondisi: bekas, Tahun pembuatan: 1992, maks. lebar pemotongan: 5300 mm maks. tinggi pemotongan: 2200 mm diameter mata gergaji: 300 mm maks. ketebalan pengerjaan: 80 mm Bdedpjy H E Utjfx Afpjg lubang mata gergaji: 30 mm penopang bawah: rol tetap penopang material: palang plastik fleksibel sistem pengukuran: skala kemiringan kepala gergaji: manual pengumpanan gergaji: manual penempatan: berdiri bebas penyedotan: eksternal penguncian balok gergaji: manual Berat kira-kira: 1500 kg dimensi: 6300 x 1300 x 2900 mm daya motor: 5,5 kW Lokasi penyimpanan: Nattheim

Kondisi: baik (bekas), Tahun pembuatan: 2008, Striebig Gergaji Panel Compact 5220, Tahun Pembuatan 12/2008 Rangka gergaji yang kokoh, menopang sendiri, dilas dengan kuat, dan tahan terhadap puntiran. Konstruksi baja balok gergaji yang stabil dan tahan lama. Penyangga motor yang kuat memastikan presisi pemotongan yang tinggi. Motor 3,0 kW (S1) yang bertenaga dan menghasilkan getaran rendah. Sistem penyedot debu TRK. Kisi-kisi aluminium yang secara otomatis menyesuaikan diri dengan lapisan plastik. Perangkat untuk pemasangan di dinding. Rol penyangga yang menggunakan bantalan bola. Penyangga tengah yang terpisah pada ketinggian kerja yang optimal, dengan kisi-kisi aluminium. Penyangga untuk bagian-bagian kecil yang terintegrasi, terbuat dari kayu. Isolasi suara Super Silent untuk mengurangi kebisingan mata gergaji. Rem motor elektromagnetik. Berat gergaji sekitar 910 kg. Kedalaman pemotongan 60 mm. Daya motor gergaji 3,9 kW (5,3 HP). Diameter mata gergaji 250 mm. Lubang mata gergaji 30 mm *1. Tingkat tekanan suara emisi di tempat kerja LpA 82 dB *2. Kecepatan mata gergaji 5250 RPM. 2 lubang penghisap debu, diameter 100 mm. Daya sambungan 4,8 kW. Sambungan listrik 3 x 400 V / 50 Hz. Bdjdpfx Afszp Nt Aopeg Rentang pemotongan: Panjang: 4600 mm; Tinggi (vertikal): 2200 mm, Tinggi (horizontal): 2100 mm. Perlengkapan: - Compact 5220 - Penyangga mandiri, lengkap. Lokasi: Tersedia di gudang 54634 Bitburg. - Tersedia segera -

Tahun pembuatan: 2007, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: CN5ED08442, Nitech Pol Eko CLN 53 Labor-Inkubator, Baujahr 2007, Seriennummer: CN5EC07031 Anwendungsbereiche: - Inkubation von Proben für mikrobiologische Bestimmungen - Analyse der thermischen Beständigkeit von Proben bei erhöhten Temperaturen - Antikörpertests - Bakteriologische Untersuchungen - Kristallisationsbeobachtungen - Kultivierung thermophiler Mikroorganismen - Prüfungen zur pharmazeutischen Stabilität - Tests zur Beeinflussung oder Verfälschung in der Lebensmittelindustrie Technische Daten: - Nutzinhalt: 56 l Bdsdpfxjfiav Ue Afpsg - Temperaturbereich: +5°C über Umgebungstemperatur ... +100°C - Innenraum aus säurebeständigem Stahl - Tür mit horizontaler Öffnung - Selbstdiagnosesystem - Wiederherstellung des Arbeitsprogramms bei Stromausfall - Alarmfunktion temperaturgesteuert - Natürliche Luftumwälzung - Anzahl der Innenregale: 2, höhenverstellbar Abmessungen [mm]: - Außenbreite: 590 - Außenhöhe: 700 - Außentiefe: 620 - Innenbreite: 400 - Innenhöhe: 390 - Innentiefe: 360 - Gewicht [kg]: 50 - Spannung: 230V 50Hz - Leistung [W]: 450 Einwandfreier technischer und optischer Zustand. Preis: 900 EUR zzgl. MwSt., FCA Oradea, Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch. / Wir sprechen Deutsch / Beszélünk magyarul / Nous parlons français / Vorbim româna.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Striebig Control 6216 (tahun pembuatan 2008) adalah gergaji pemotong panel vertikal kelas premium dengan ukuran area pemotongan sekitar 5300 x 2160 mm, yang dirancang untuk memotong kayu, plastik, dan panel komposit aluminium dengan presisi. Bjdpfx Aszpbcvefpodg Fitur Teknis Area pemotongan: sekitar 5300 mm (panjang) 2160 mm (tinggi) Pengendalian: pemosisian elektronik penuh dan pengoperasian layar sentuh untuk pemotongan serial. Kedalaman pemotongan: hingga 80 mm. Aplikasi: dioptimalkan untuk proses kerja yang sepenuhnya otomatis dan akurasi pengulangan yang tinggi. Lokasi: akan tiba pada minggu ke-33 di gudang 54634 Bitburg.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, STRIEBIG III TRK pre-scoring unit (scorer) In wooden crate Can be retrofitted to a Striebig Standard TRK Location: ex stock 54634 Bitburg Bdsdpfovluwvex Afpeg - immediately available -

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 1.997 h, kapasitas angkut: 1.400 kg, tinggi angkat: 4.716 mm, pengangkatan bebas: 1.545 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.065 mm, jenis penggerak: Elektro, Mesin forklift dengan kursi pengemudi Jenis tiang: Triplex Kondisi: Siap digunakan dan berfungsi penuh Kondisi teknis: baik Bodpezxkkzsfx Afpjdg Voltase baterai: 24V Jenis baterai: Lithium-ion

Tahun pembuatan: 2008, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, FREWITT MF-LAB – MESIN PENGGILING LABORATORIUM / GRANULATOR UNTUK INDUSTRI FARMASI Dijual: Mesin penggiling laboratorium / mesin ayak berosilasi FREWITT MF-LAB yang sebelumnya digunakan dalam industri farmasi, dalam kondisi bekas yang sangat baik. Mesin ini dilengkapi dengan satu set lengkap yang terdiri dari 13 sisipan ayak asli dengan berbagai ukuran, serta dokumentasi asli dan dokumentasi kualifikasi yang lengkap. DATA TEKNIS Produsen: FREWITT SA, Swiss Model: MF-LAB Tahun: 2008 Nomor Seri: 6180310817 Catu daya listrik: 400 V / 50 Hz Arus: 16 A Spesifikasi: ATEX APLIKASI MF-LAB dirancang untuk aplikasi laboratorium dan farmasi dan dapat digunakan untuk mengurangi ukuran, kalibrasi, dan penyaringan produk kering atau lembap dengan lembut. Sangat cocok untuk: - Penelitian dan pengembangan farmasi - Aplikasi laboratorium dan skala pilot - Kalibrasi granul - Penghancuran aglomerasi - Pengukuran dan penyaringan Bdsdpfx Ajzxdgijfpsg - Produk yang sensitif terhadap panas PAKET AYAK LENGKAP Keunggulan utama mesin ini adalah jumlah sisipan ayak yang disertakan sangat banyak. Terdapat 13 sisipan ayak yang diberi tanda, dalam 9 jenis/ukuran yang berbeda. Semua ayak yang ditampilkan dalam foto disertakan dalam cakupan pengiriman. DOKUMENTASI Dokumentasi asli dan dokumentasi kualifikasi yang lengkap tersedia bersama dengan mesin. KONDISI Kondisi bekas yang sangat baik dan bersih, sebelumnya digunakan dalam industri farmasi. Inspeksi dan demonstrasi dapat diatur dengan perjanjian di CYCRON GmbH di 4226 Breitenbach, Swiss. Pengiriman ke seluruh dunia dapat diatur berdasarkan permintaan. CYCRON GmbH Swiss Faktur akan diterbitkan oleh CYCRON GmbH. Tergantung pada ketersediaan dan kesalahan yang mungkin terjadi.

Kondisi: baik (bekas), We offer here a second-choice column guard from the manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Column guard, second-choice Material colour: yellow Design: V-shape Total height: approx. 400 mm Total width: approx. 112 mm Internal width: approx. 104 mm Total depth: approx. 60 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Grid/hole pitch: approx. 250 mm Number of holes: 04 pcs. (02 pcs./side) Hole diameter: approx. 9 mm 04x Hexagon bolt: M8 x 35 mm 04x Serrated nut: M8 04x Washer: M8 General information about the item: Bodpfx Ajhr U S Uefpedg This item is offered for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Kondisi: seperti baru (mesin pameran), We offer here a second-choice (II. Wahl) column protector from the manufacturer SSI Schäfer for purchase. Scope of delivery includes: 01x Column protector, second-choice Material color: yellow Design: V-shape Total height: approx. 750 mm Bjdpfohr U Trsx Afpedg Overall width: approx. 124 mm Internal width: approx. 116 mm Total depth: approx. 65 mm Leg dimension: approx. 65 x 65 mm Material thickness: approx. 4 mm Grid/hole spacing: approx. 300 mm Number of holes: 6 pcs. (3 pcs./side) Hole diameter: approx. 9 mm 06x Hexagon bolt: M8 x 35 mm 06x Serrated nut: M8 06x Washer: M8 General information about the item: This item is only available for collection. Additional transport or shipping of this item is subject to extra costs, which can be specified separately depending on the delivery location and scope of delivery. Please contact us for individual quotes.

Tahun pembuatan: 2018, Kondisi: baru, Here are your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a new column protector from the manufacturer Mecalux for purchase here. The column protector is suitable for frame profile widths up to a maximum of 120 mm. Scope of delivery includes: 01x Column protector, new Material colour: orange For upright profile width: approx. 120 mm Overall height: approx. 600 mm Overall width: approx. 132 mm Internal width: approx. 126 mm Total depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (centre-to-centre): approx. 400 mm Weight per unit: approx. 4.298 kg 04x Hexagon bolt: M8 x 25 mm 04x Locking nut: M8 04x Washer: M8 Bsded Rxyrspfx Afpodg Our services at a glance: (prices on request) Assembly and installation Our general assembly terms and conditions apply. Racking inspection Inspection according to DIN EN 15635, carried out as per requirements of BGR 234 visual checks for all racking systems. Delivery with our own fleet (unloading not included)

Kondisi: baik (bekas), We are offering a used pallet rack upright from the manufacturer Polypal for sale. Technical data for the pallet rack upright: Racking system: Polypal Type: Stockpal Included in the scope of delivery: 01x pallet rack upright, used Material finish: Sendzimir galvanized Profile dimensions: 85 x 63 x 2.00 mm Profile type: SKMO5220P Including horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss design) Height: 1,800 mm Depth: 1,100 mm Bdodpfsht Rq Usx Afpeg General information about the item: This item is offered for pick-up only. Should you require delivery or shipping, this will incur additional costs that can be provided upon request depending on the delivery location and scope.

Kondisi: baik (bekas), The scope of delivery includes: Bdodpoilg Evsfx Afpog 01x Roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile dimensions: C 80 x 35 x 12 mm Cross-brace dimensions: approx. 380 x 60 x 50 mm Mounting plate dimensions: approx. 140 x 135 x 3.00 mm Drill hole Ø: approx. 9 mm Drill hole spacing: approx. 100 mm Frame profile wall thickness: approx. 2.50 mm Material finish: Sendzimir galvanized

Kondisi: bekas, Your contacts at our company: Bdedpfxsdf S Eye Afpsg Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We offer you here a used framework for roller conveyors for purchase. When placing an order, please specify the required upright heights & upright depths! Scope of delivery includes: 01x framework, used Material finish: fully galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm (freely selectable by you) Other heights & depths can be manufactured upon request. Our services at a glance: (prices upon request) - Assembly, installation Please observe our general assembly conditions. - Racking inspection Racking inspection in accordance with DIN EN 15635, performed according to the requirements of BGR 234 Visual inspection for all racking systems - Delivery with our own fleet (without unloading) Shipping costs upon request!

Kondisi: baik (bekas), The scope of delivery includes: 01x Roller conveyor stand, used Total width with base plates: 275 mm Frame width: approx. 245 mm Minimum height: approx. 660 mm Maximum height: approx. 900 mm Overall depth with base plates: approx. 160 mm Bsdpoilg E Isfx Afpodg Frame profile dimensions: C 80 x 35 x 12 mm Cross brace dimensions: approx. 180 x 60 x 50 mm Mounting plate dimensions: approx. 140 x 220 x 3.00 mm Drill hole diameter: approx. 9 mm Hole spacing: approx. 100 mm Frame profile material thickness: approx. 2.50 mm Material finish: sendzimir galvanized

Kondisi: baik (bekas), Here are your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are pleased to offer you a used column guard manufactured by Gemac for purchase. The column guard is suitable for a frame profile width of up to 90 mm. Scope of delivery includes: 01x Column Guard, used Material color: cream white Design: V-shape For upright profile width: approx. 90 mm Total height: approx. 600 mm Total width: approx. 113 mm Deflector height: approx. 60 mm Material thickness: approx. 4 mm Hole diameter: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight per piece: approx. 4.888 kg 02x Mounting Plates, used Material color: cream white Dimensions: 130 x 91 mm (W x D) Material thickness: approx. 7 mm 04x Hexagon bolts: M10 x 35 mm 04x Serrated nuts: M10 04x Washers: M10 Bjdpfx Afsfdqkaepodg Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspections according to DIN EN 15635, performed in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (unloading not included)

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Centrifuge Thermo Micro CL 17, tanpa pendingin, 17000g, rotor 24 tempat untuk tabung 1,5/2ml. Seperti baru! Direkomendasikan! Pengiriman tersedia. Bdedpfx Afsw Rmrmjpog