Beli Holz-Her 1220 Automatic bekas (28.777)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, penggerak gergaji: 3.000 W, holz-her-1220-automatic-vertical-panel-saw Fsdjx Eyqyopfx Airogc

Kondisi: bekas, Tahun pembuatan: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials, such as chipboard, MDF boards, veneer boards, multiplex, etc. Base machine - Fully welded frame with extremely high rigidity - Precise guidance of the saw beam / saw unit for accurate cuts - Automatic feed for vertical and horizontal cuts - Cutting depth: max. 60 mm Saw beam - Sturdy saw beam mounted on precision guides - Pneumatic locking of the saw beam at the top and bottom - Electrically monitored during vertical cuts Fgsdjyuld Aopfx Airec Saw unit - Smooth and ergonomic operation for plunging in and retracting the saw unit - Plunge lever can be folded down in the upper position for precise lowering of the saw unit - Generously sized levers for easy tilting - Housing cover opens the entire saw unit for easy tool changes, including ProLock quick-release chuck - Light cut-out: riving knife can be retracted Automatic functions - Automatic plunge, cutting, retraction, and stop, or - Automatic plunge, cutting, retraction, and return - Shortened return (selector switch) - Short return function avoids unnecessary carriage travel when working pieces are positioned to the right Speed control: stepless from 6 to 24 m/min Cutting depth: max. 60 mm Control panel - Efficient machine operation; ergonomically positioned at eye level Lower workpiece support - Sturdy, wear-resistant stainless steel support - Support up to the cutting line: narrow workpieces cannot tip or fall through Extraction - Effective extraction with two ports: saw unit Ø 120 mm; frame end Ø 100 mm (for TRK version) Lifting roller transport system - Manually liftable and lowerable rollers for easy and gentle panel transport Measuring tape - For horizontal cut measurement with three manual measurement displays: - Absolute measurement from the lower workpiece support - Absolute measurement from the middle workpiece support - Series cuts from the panel top edge Power package The package includes the following options: 1. TRK extraction device 2. SuperCut scoring unit 3. Digital vertical display 4. Stepless speed regulation * Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Including carbide-tipped circular saw blade Ø 250 x 30 x 3.2 mm, Z48, hollow flat tooth * TRK unit according to CE directives SH 2200 (less than 2 mg fine dust/m³ air) – mandatory for all CE-compulsory countries (extraction system by customer) Pneumatic shifting grid Continuous shifting grid across the entire machine length for stable workpiece support; automatically, pneumatically retracting during horizontal cuts; prevents cutting into the shifting grid during horizontal cuts * Digital measurement display for horizontal cuts at the control panel; Including electrical fine adjustment Displays: - Absolute measurement from the lower workpiece support - Off-set measurement from the middle workpiece support - Series cuts from the panel top edge - Saw blade compensation (blade thickness can be individually programmed) ...if the unit is braked via the carriage...

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Otomatis penuh, posisi berdiri, Area pemotongan: 5.300 x 2.200 mm (lebar potong x tinggi potong), Diameter mata gergaji: 300 mm, Kontrol untuk pemotongan vertikal dan horizontal, dengan stopper lipat ALU dan penyangga tengah ALU, Fgsdpfx Aiex Rr D Asroc dengan perangkat scoring SUPER-CUT Motor: 3 kW - 400 V Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) Fjdpfxewka Upj Airogc - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: 974/1-810, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 1.483 h, tinggi benda kerja (maks.): 60 mm, kecepatan pemakanan sumbu X: 18 m/menit, model controller: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Fgedpfxjy Tw Edo Airjc Joint milling unit 1802 Motor output: 2 x 2.0 kW 1st cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for joint milling unit 2nd cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for joint milling unit Edge feeding unit 1901 SYNCHRO (fully automatic) Gluing station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: storage chamber for 14 cartridges (1.4 kg) GluJet collection container Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor output: 2 x 0.65 kW Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm left-hand rotation Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm right-hand rotation Profile milling unit 1833 MOT4 1st cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM-technology 2nd cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM-technology Scraper unit 1929 MOT4 HW reversible knives for scraper holder R = 2 mm (2 pcs. required) Flat scraper FK 701 Polishing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spraying device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Minimum workpiece length: 160 mm Minimum workpiece width: 60 mm Workpiece thickness: 8 - 60 mm Max. edge height: 65 mm Edge thickness (coil material): 0.4 - 3 mm Edge thickness (strip material) max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed fence length: 1,350 mm Electrics for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - vertical feeler shoe top & bottom Edition 18 package ECO MODE energy saving mode ITronic system

Kondisi: bekas, Tahun pembuatan: 2023, nomor mesin/kendaraan: 08523V3, Mesin dirawat dengan baik dan dalam kondisi baik. Fgedpfx Aiezb Hw Rersc

Kondisi: bekas, holzher-1057xl-de-hu Fsdpozcau Ejfx Airsgc

Kondisi: bekas, Tahun pembuatan: 2022, Used machine Year of manufacture: 2022 Features and technical data: Base machine DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS 'Better Nest' free-form nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 drilling unit, complete with 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction n(max.) 1000-7,330 rpm, continuously variable Fgedpfx Ajygn Ibeirec 1 rear stop rail for processing field (field D) with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-slot linear pick-up, pneumatically liftable with integrated HSK holder covers 2 additional holders for HSK adapters for tool changer 7873 Tool changer 7872, single-position aggregate magazine, swiveling in X and Y direction 2 x vacuum pump, 140 m³/h, dry-running Vacuum unit complete (VP8) 250 m³/h, 400 V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, ALIGN COMPLETE POINT LASER COMPLETE OPTION ZB8 Lubrication system complete, central lubrication, sender side 2 x vacuum suction cups for smooth table surfaces, complete, 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction cups for smooth table surfaces, complete, 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, discharge belt AUT 5 10.7 push-off table Additional extraction via discharge conveyor belt Pusher on gantry, controlled Incl. simultaneous extraction for wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: - Machine completely overhauled: - New Glue Jet 301 gluing system (top part 1 mm) - All units checked - All cutters resharpened - All blades replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical equipment for stepless feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing/milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Fully automatic edge feed 1901 - Automatic glue application station Glu Jet GJ301: - 2.3 kW; 50 Hz - Granulate reservoir - Pressure section 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Contour milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology Fgsdpfx Ajwka Iisiroc - Scraper unit 1929 MOT2: - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Polishing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Fodpjwka Nysfx Airjgc Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, HOLZ-HER Evolution 7405 Connect Manufacturer: HOLZ-HER Model: Evolution 7405 Connect Machine type: CNC woodworking / vertical CNC machining center Year of manufacture: 2022 Serial number: XXXX Control: HOLZ-HER Software: Campus V7-EVO Operating voltage: 400 V / 50–60 Hz Power consumption: 10.3 kW Safety enclosure: fully enclosed cabin Color: grey Number of previous owners: 1 Spindle / Milling Unit Spindle speed: 1,000 – 24,000 rpm Fedpfx Aszcm Ufeiregc Tool holder: HSK-F 63 Tool magazine: 6 positions Milling unit: Type 7830 Max. tool diameter: 110 mm XL boring unit: 1.7 kW Boring unit: 19 spindles Angle gear unit: 7869 Working area / Workpiece Data Max. working dimensions: 3,200 x 1,190 x 70 mm Min. working dimensions: 200 x 70 x 8 mm X-axis max.: 3,200 mm Y-axis max.: 920 mm Max. workpiece weight: 75 kg Machine Data Machine weight: approx. 2,000 kg Dimensions L x W x H: 3,800 x 1,800 x 2,500 mm Equipment Campus V7-EVO software Campus standard macro package Handheld control device for remote operation 21.5" flat screen monitor Wired keyboard 2D barcode scanner Laser workpiece length measurement Milling unit 7830 with 6-position magazine XL boring unit 1.7 kW with 19 spindles Angle gear unit 7869 Workpiece support with infeed table ECO vacuum system Automatic central lubrication Air conditioning unit for control cabinet cooling Fully enclosed safety cabin Comments on condition: Machine was not connected during inspection in May Test run therefore not carried out at this time Spindle test run also not performed Operating hours could not be read out due to lack of power Machine is dirty, cleaning recommended Maintenance / accident prevention inspection (UVV) undocumented, performance recommended Equipment, tools, and accessories are present in machining area, but area could not be accessed due to lack of power Functional check and trial run recommended before commissioning Check software for updates and latest status Machine documents / purchase invoice available as copies The machine can be connected and test run by Montrasio Werkzeugmaschinen GmbH.

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Fgjdpfx Aswka N Tsirec Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja minimum: 180 mm Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Kondisi: bekas, Tahun pembuatan: 2023, Used machine Year of manufacture: 2023 177 operating hours Equipment and technical specifications: - Edge Control PPC 322 W control system with 21.5'' 16:9 color touchscreen - ECO MODE energy-saving mode - Motorized pressure bridge adjustment - Extendable workpiece support, 600 mm Fgjdey Rgwqjpfx Airoc - Extension for extendable workpiece support - 3-color LED entry light - Motorized adjustment of infeed fence - Long infeed fence - Air cushion table BS 301 - iTronic package - Jointing unit FG201 with 2 milling heads, 64 mm height - Edge feed 1903 - GluJet GJ 301 adhesive application system - Automatic glue height adjustment (sensor nozzle) - Magazine for 4 glue cartridges - GluJet collection container - Pressure unit DW 301 with motorized NC axis - Spray unit GM301 after pressure unit with lubricant for high-gloss edges - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Milling unit FR301 MOT6 - Corner copying unit FF 301 MOT 1, including motorized horizontal axis adjustment - Shelf program - Scraper unit ZK301 MOT4 with high-gloss package - Surface scraper FK701 - Complete spray unit for separating and cleaning agents - Polishing unit Availability: short notice Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 1989, Mesin bekas Tahun pembuatan: 1989 Kondisi: Telah diuji fungsinya Perlengkapan dan data teknis: Ketebalan edge band maksimal: 20 mm Fgsdpfx Asw I U E Aoirec Tinggi edge band maksimal: 51 mm Ketebalan material roll maksimal: 3 mm Panjang benda kerja minimal: 140 mm Lebar benda kerja minimal: 60 mm Sistem lem: 1906 Cartridge Unit penekan Unit frais 1920 – frais rata & miring hingga 20 mm Kebutuhan ruang (P x L x T): 3150x1800x1375 mm Berat sekitar: 800 kg Lokasi: Flörsheim Ketersediaan: Segera

Kondisi: bekas, Tahun pembuatan: 2001, Used machine Year of manufacture: 2001 Features and technical data: The machine will be completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cuts PLC control with 2-line display and plain text messages for operation mode and error diagnostics infinitely variable feed speed up to 24 m/min automatic workpiece end detection calculator function in the control panel (for calculating workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height: 2100 mm max. scoring height, vertical: 2100 mm max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4500 rpm Saw blade diameter: 300 mm Air requirement: 1200 m³/h Air velocity: 20 m/s Static negative pressure: 1200 Pa Extraction connection: 2 x 120 mm Fsdpfjw Nac Aex Airjgc Dimensions (L x W x H): 5620 mm (plus extraction connectors) x 1480 mm x 2948 mm Room height: 2990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connected load: 5.7 kW with Supercut pre-scoring unit with pneumatically swiveling saw unit with longitudinal fence for lower workpiece support with short, complete folding rail Availability: by arrangement Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2005, Mesin bekas Tahun pembuatan: 2005 Kondisi: Rel pemandu sedikit aus, hanya cocok untuk pemotongan kasar Perlengkapan dan data teknis: - Panjang potong: 4300 mm - Ketinggian lewat maksimum: 2200 mm - Ketinggian pemangkasan maksimum: 2100 mm - Ketinggian scoring vertikal maksimum: 2100 mm - Kedalaman potong: 80 mm - Motor: 5,5 kW - Kecepatan putar mata gergaji: 4500 rpm - Diameter mata gergaji: 300 mm - Ekstraksi debu: 2 x 100 mm - Konsumsi udara bertekanan: 60 NL/menit Dimensi: 5620 x 1480 x 2990 mm Fgjdpfxowqifkj Airsc Ketersediaan: segera Lokasi gudang: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2002, panjang total: 5.050 mm, lebar total: 2.420 mm, tinggi total: 800 mm, 01 Fgodpfx Aiezcng Njrjc

Kondisi: bekas, Tahun pembuatan: 2019, Used machine Year of manufacture: 2019 Condition: Good (The machine has undergone extensive annual maintenance. Last serviced in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - SPS-controlled infeed fence adjustment - Automatic chain lubrication – Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM GRADUAL. 400V50HZ 2.2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format Fgjdpfsy Hyl Tex Airsc ECO MODE energy-saving mode (automatic standby mode) Planing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 planing units for trimming the panel edge Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation. Air Stream System (HOLZ-HER / LEUCO patent) Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation. Air Stream System (HOLZ-HER / LEUCO patent) Edge feed 1901 SYNCHRO – Automatic transport for roll and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) DW501 SPS MOT. SPRINT MOTORIZED Spray unit GM501 after the printing unit with lubricant. Recommended for high-gloss edges End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically tiltable 0/10° Milling unit FR701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 Contour milling unit FF701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, left-hand rotation with CM technology Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, right-hand rotation with CM technology Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of sensing rollers HW reversible inserts for scraper holder, R = 2.0 mm (2 pcs required) Flat scraper FK701 With pre- and post-tracking for removing glue residue Spray unit TR501 for infeed and outfeed (separating + cleaning agents) Incl. nesting shoes bottom with their own spray unit Location: Hesse Availability: Approx. July 2026

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 11.517 h, Color: Grey Empty weight: 6,000 kg - Year of manufacture: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11,517 - Number of milling spindles [pcs]: 1 - Milling spindle 1: - Number of controlled axes [pcs]: 4 - C-axis present: Yes - Type of milling table: Flat table - Boring tool included: Yes - Horizontal boring spindles [pcs]: 6 - Vertical boring spindles [pcs]: 18 - Tool changer positions [pcs]: 12 - System/Software: TWINCAT - Safety features: Safety fence, safety mat - Vacuum pump included: Yes - Quantity [pcs]: 2 - Brand: Becker - Year of manufacture: 2023 - Main motor power [kW]: 18.5 - Capacity [m³/h]: 600 - Vacuum [bar]: 250 Fgodox E Uk Uopfx Airsc - CNC documentation included: USB stick - Working area X [mm]: 7,220 - Working area Y [mm]: 1,580 - Z-axis working area [mm]: 180 - Transport weight [kg]: 6,000 kg Financial Information VAT: The stated price is exclusive of VAT VAT/Margin taxation: VAT deductible for businesses Delivery and trade-in available at any time for all types of industrial equipment Glenn Smeets

Kondisi: bekas, Tahun pembuatan: 2010, tinggi total: 2.580 mm, panjang total: 5.500 mm, lebar total: 1.500 mm, Weight: 1,500 kg Price: On request - Year of manufacture: 2010 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 161/1-10 - Number of units: 7 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Gluing unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Rough trimming unit - Tools included: Yes - 6th unit type: Corner rounding unit - Tools included: Yes - 7th unit type: Flat scraping unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500 mm x 1500 mm x 2580 mm (L x W x H) - Transport weight [kg]: 1,500 kg Fgodoyu Tkkjpfx Airjc - Number of transport packages: 1 Financial information: VAT: The stated price is net plus VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2011, tinggi total: 1.730 mm, panjang total: 6.100 mm, lebar total: 1.440 mm, Color: Grey Weight: 2,500 kg - Year of manufacture: 2011 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 5/1-107 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - Tools included: Yes - └ 2nd unit type: Gluing unit - └ 3rd unit type: Pressure rollers - Tools included: Yes - └ 4th unit type: End trimming unit - Tools included: Yes - └ 5th unit type: - Tools included: Yes - └ 6th unit type: Corner rounding unit - Tools included: Yes - └ 7th unit type: Radius scraping unit Fodpfx Ajyf Dakeirogc - Tools included: Yes - └ 8th unit type: - Tools included: Yes - └ 9th unit type: Flat scraping unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (L x W x H) - Transport weight [kg]: 2500kg - Number of transport packages: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for business customers Delivery and trade-in possible at any time for all industrial sector items Yorick Diebels

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture, panel materials, custom productions, kitchens, bathroom furniture, joineries, and much more – CE-compliant. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for coil and strip material Cartridge glue system, allows switching between EVA and PUR glue during operation or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors 0.22 kW each Multi-function unit with controlled axis for flush and chamfer milling, 2 motors 0.6 kW each Flat scraper unit Radius scraper unit Buffing unit Acoustic hood Control: Pivoting and swiveling control panel All units can be individually activated Function display with text and graphics Pre-selection display of units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg Fgsdey Emw Hspfx Airoc INCLUDES OTT Rondomat – Corner Rounding Unit Note on used machines: • Subject to technical changes and prior sale. • Prices stated are ex works – loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as-inspected without any warranty or guarantee. Buyers are welcome to inspect the machine at our location. • Special agreements are only valid in written form. (We respond to inquiries only if you provide your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with a new glue application system - Infeed fence, manually adjustable - Milling unit 1961 - Edge feed unit 1903 - Glue application station 1906 with sensing nozzle - Pressing unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper station 1929 - Chip collection box - Area scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge material thickness depending on configuration: 0.4–5 mm - Edge height max.: 55 mm - Edge strip length: min. 350 mm - Edge overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: Fodpfx Aiswka H Ssrsgc - Jointing milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper station: 280 m³/h - Static negative pressure: - Jointing milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Minimum air velocity: 20 m/sec - Jointing milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Tahun pembuatan: 1989, Kondisi: baik (bekas), - tilting spindle - shaft diameter 50 mm Fodpfxegxpile Airegc - height adjustment - pneumatic spindle position adjustment - power supply 400V - feed mechanism is not included in the offer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, • Schnitthöhe 2.200 mm x Schnittlänge 4.300 mm • Absaugung gemäß CE TRK-Richtlinien CH 2200 (weniger als 2 mg Feinstaub/m³ Luft) • Mittlere Werkstückauflage – 4 Zonen • Schiebeschlitten 1255 für Schnitthöhe 2.200 mm • Sägehauptaggregat 4,0 kW, 5.400 min-1, 400 V, 50 Hz inkl. HW-Sägeblatt Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Längenanschlag (manuell) mit digitaler Anzeige für Vertikalschnitte. Für die mittlere Werkstückauflage • Digitale Anzeige für Horizontalschnitte am Bedienfeld inkl. elektrischer Feineinstellung • 3 verstellbare Anschlagpunkte im Sägebalken für wiederholende Horizontalschnitte über Anschlagpunkt • Streifenanschlag für wiederholende Horizontalschnitte, Skala in mm, max. Streifenhöhe 650 mm • Kleinteilehalter (2 Stück) Verhindert das Kippen von Werkstücken • Super Cut Ritzvorrichtung: Zum Anritzen der Oberfläche von beschichteten Materialien. • Schnittoptimierung Opti-Base V-Cut 1 Stk. 10" Touchscreen 1 Stk. Maschinen-Software 1 Stk. Büro-Software – 1 Arbeitsplatz Floating-Netzwerklizenz (Opti V-Base) 1 Stk. Etikettendrucker Fgedpfx Aijy Nmtcoroc • Angaben erfolgen unverbindlich. Diese Maschine wird im Kundenauftrag angeboten. Besichtigungen sind nach vorheriger Terminabsprache möglich. Bitte kontaktieren Sie uns über das Nachrichtensystem der Plattform für weitere Informationen oder zur Übermittlung des technischen Ansprechpartners.