Beli Hsm Vk 8818 bekas (389)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Ljdpfxsyz Af Eo Aptshh Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 11.850 h, gaya penekanan: 88 t, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), Te koop: gebruikte balenpers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 De balenpers betreft een VK 88 R – FU, uitgevoerd met frequentieregelaars, 2 x 45 kW motoren. * Optie voor ontblokkeer-cilinder * Kogelgewrichtbevestiging hoofdcilinder * Stadler transportband, 1600 mm intern Bouwjaar: 2012 Totaal draaiuren: 11.850 De stang van de hoofdcilinder en het afdichtingsset zijn recent vernieuwd. Te vervangen: 2 voorste vloerplaten van de perskamer: midden en voorkant van het kanaal Smeren/vervangen: Enkele zijdelingse diabolorollen zijn gebruikt en in bedrijf; sommige zijn roestig, sommige in goede staat. De pers draait naar behoren en het knopen van de balen gaat goed. Aandrijfwielen ram: OK Zijwielen ram: OK Hoofdcilinderstang: vrijwel nieuw Lhodpfx Apoyuyg Sotsh Hoofdcilinder afdichtingsset: vrijwel nieuw Ram zijnylon strips: 80-90% in goede staat. Fijnafstemming geometrie mogelijk door toevoegen van vulringen (klant heeft onderdelen op voorraad). Mes/tegenmes: goed, ca. 70% Naaldrollen: in orde, maar vervangen is aan te raden + de afsluitplaten Hoofdfrequentieregelaar 1 van 2: Totaal 2 x 45 kW: één van de twee is defect. Het is niet bekend of deze vervangen wordt. De pers draait momenteel op één pomp. Zijwanden perskamer: Zijwanden zijn versleten ter hoogte van de nylongeleidingsplaten: enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen zijn gebruikt en vertonen lichte speling. Smering ontbreekt, maar zijn nog in goede staat. Geleidingsstrips zijn in orde. Opvoerlatten zijn vrijwel geheel versleten. Start/stop via frequentieregelaar. Zijwanden zijn goed op het schuine gedeelte en in de put. Draadrollenplatform: niet inbegrepen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, Technical Data: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening (W x L): 970 x 1,800 mm Bale dimensions (W x H x L): 1,100 x 750 x 600–2,000 mm Maximum bale weight: up to 700 kg or 800 kg, depending on material The baler feed system comprises the following components: - 1 fully enclosed STADLER chain conveyor with corresponding shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire spool carts - 1 multi-control unit for the baler - Complete engineering documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Lhjdpfx Apoygud Aetoh Weight: 33,000 kg Binding type: Wire Suitable materials: plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles The plant is operational and can be inspected during operation. The machine will be dismantled on 16th February and can then be inspected at our premises. Available immediately!

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 990 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), laju aliran volumetrik: 643 m³/jam, Good day, We hereby offer you, subject to prior sale, a used baler including conveyor belt, wire-tying stations, and bale slide from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions incl. conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film materials. The baler is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this press is of interest to you. Lhjdpfxjymmtco Aptsh Your Service Team Mertens & Frowein GmbH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, Perlengkapan: dokumentasi / manual, HSM VK 4812 P Year of manufacture: 2017 Fully automatic baler. The machine has undergone service and maintenance by an authorized HSM Service Center with a branch in Germany. Baler operation after extensive maintenance work – details available upon direct contact. The baler is supplied complete with a ramp for discharging finished bales and stands for binding wire. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Pressed materials: Film, mixed paper, cardboard, punching waste Bale tying: 4-fold with wire We also have other balers in stock. Transport costs depend on weight, volume, and especially distance; for inquiries, the following information is important: delivery address (postal code and city name). For further details, telephone contact is required, so please inquire about transport costs and shipping options by phone. Lhjdpfxozff Sms Apteh Our contact details can be found in the seller's legal notice. We sell and export worldwide and, thanks to our large storage capacity, can deliver larger quantities flexibly and quickly. We issue intra-community invoices – VAT exempt. Business hours: Mon-Fri: 8:00 am – 4:00 pm Sat: closed

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, panjang bal: 1.200 mm, lebar bal: 750 mm, tinggi bal: 1.100 mm, berat bal: 550 kg, Perlengkapan: dokumentasi / manual, Automatic Baler HSM VK 4812 The machine is in perfect condition. Total hours worked: only 1,950; total number of bales processed: only 1,314. The machine was regularly serviced and has operated indoors since new. It processed very low-abrasion material – textile trimmings. Key advantages of the machine: - Actual throughput: 6–13 t/h Ledpfjzb H E Ujx Aptjhh - Optimal continuous operation: 6–10 t/h - Very fast cycle → works well with belt conveyor lines - Significantly better than the 15–22 kW versions for high material volumes Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressure: 58.2 N/cm² Volumetric output: up to 332 m³/h Practical weight output: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical maximum output: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Feed opening: approx. 1020 × 1250 mm We also have other balers available in stock. Transport costs depend on weight, volume, and most importantly distance. When inquiring, please provide the following information: delivery address (postal code and town/city). Further details require phone contact, so we ask you to inquire about transport costs and other delivery options by contacting us by phone. Our contact details can be found in the seller’s legal information. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. We issue intra-Community invoices – VAT exempt. Opening hours: Mon–Fri: 8:00–16:00 Sat: closed

Kondisi: diremaj di bengkel (bekas), panjang bal: 1.200 mm, lebar bal: 700 mm, tinggi bal: 800 mm, berat bal: 380 kg, Mesin press dalam kondisi ideal, tidak digunakan setelah renovasi. Perawatan hanya di produsen. Kondisi sangat baik. Operasi sepenuhnya otomatis. Panjang bal yang dapat diatur 600-1200 mm. Motor 15KW. Tahun 2007. Berat bal sekitar 380 kg. Lhjdpsx S Sbdsfx Aptoh

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Pressing force: 42 tons Lhjdpfx Apjra Nrxstoh Bale dimensions: 700 x 800 x 600 - 1200 mm Bale weight: approx. 450 kg Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 20.580 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, arus masuk: 59 A, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.750 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), lebar transportasi: 2.300 mm, panjang transportasi: 8.500 mm, kapasitas tangki: 300 l,

Kondisi: baik (bekas), HSM ProfiPack P425 Penghancur Kardus Mesin ini menghasilkan bahan pengisi dari limbah kardus. Buatan Jerman. Dalam kondisi seperti baru, mesin siap digunakan untuk produksi. Deskripsi: Mesin bahan pengisi berperforma tinggi ini memproses beberapa lapisan kardus menjadi bantalan atau bahan pengisi, sesuai kebutuhan Anda. Kardus secara simultan digurat dan diprofil, menciptakan matras fleksibel dengan lebar sesuai keinginan. Mesin dilengkapi dengan roda caster untuk kemudahan pemindahan. Keunggulan: – Roller pemotong yang dikeraskan, terbuat dari baja solid – Penggerak kuat dan efisien, cocok untuk operasi berkelanjutan Lodpszdawiofx Aptohh – Kecepatan umpan material dapat disesuaikan – Volume bahan keluar dapat diatur – Penyesuaian lebar kerja tanpa batas dengan skala, memungkinkan pemotongan bahan pengisi dalam ukuran apapun – Pengoperasian intuitif melalui panel kontrol tahan lama dengan tampilan LED – Fungsi turbo terintegrasi mencegah penyumbatan – Pengoperasian aman berkat saklar pengaman – Dilengkapi roda dengan rem – Penggerak kuat memungkinkan pemotongan 2-3 lembar kardus sekaligus – Berat: 175 kg – Dimensi (T x P x L): 1040 x 570 x 770 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 4 t, panjang bal: 500 mm, lebar bal: 700 mm, tinggi bal: 450 mm, berat bal: 50 kg, HSM 45 VL – Technical Specifications Feature Value Pressing force approx. 44 kN (4.5 tons) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Idle cycle time approx. 23 seconds Theoretical throughput approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Ljdpfx Aowuk Nrsptjhh Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Filling height 500 mm Machine weight approx. 374 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, berat bal: 550 kg, Used vertical baler HSM V-Press 1160 Plus from 2015. The machine has been regularly serviced by an authorized service center. The press is fully operational and in very good technical and visual condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Material to be pressed: film, mixed paper, cardboard, cutting machine waste Freight costs depend on weight, volume, and above all on the distance. Relevant information for inquiries includes: delivery address (postal code and town); further details will require a phone conversation, so we kindly ask you to contact us by phone for information regarding transport costs and additional delivery conditions. Our contact details can be found under the legal information of the seller. Cash payment upon collection on site is possible. We sell and export worldwide. Thanks to our extensive storage capacity, we can deliver larger quantities flexibly and quickly. Please contact us before purchasing. Lhjdpszgumcsfx Aptsh We issue intra-community invoices – excluding VAT. Opening hours: Mon-Fri: 8:00-16:00 Sat: closed

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Merek: HSM Ljdpfszgfizex Aptehh Tipe: V-Press 1160 plus Tahun pembuatan: 2013 Tekanan tekan: 532 kN Tegangan: 400 V Bobot bal maksimum: hingga 550 kg (tergantung material) Dimensi bal: 120 x 110 x 120 cm Berat mesin: 2.403 kg Dimensi mesin: 180 x 157 x 298,5 cm Ukuran lubang pengisian: 119,5 cm x 65 cm HSM 1160 V-Press menawarkan pengoperasian yang mudah, daya tekan yang kuat, dan hemat energi. Mencari model yang lebih ringkas? Lihat HSM 860 – ideal bagi yang ingin menghemat ruang tanpa mengorbankan kekuatan tekan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, berat bal: 350 kg, Perlengkapan: dokumentasi / manual, HSM-HL-4010-ReLi-HU-IT-LT Lodpfx Ajzd R Taeptehh

Kondisi: baik (bekas), Tahun pembuatan: 1999, Ballenpressen, HSM, 30to Presskraft – gebraucht - : Preis ab Standort: nur 2.950.-€ (netto) Hersteller: HSM Typ: 225.1 VL Ljdpfozbygfjx Aptshh Baujahr: 1999 Maschinennummer: 6124.834. N Seriennummer: 200014505 Pressdruck: 30 to 400v, 5,5kW, Zustand: gut Verfügbar: ab Q4/2026 Standort: Hamburg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Merek: HSM Tipe: V-Press 1160 plus Tahun pembuatan: 2009 Tekanan press: 532 kN Tegangan: 400 V Berat bal maksimum: hingga 550 kg (tergantung material) Ukuran bal: 120 x 110 x 120 cm Berat mesin: 2403 kg Dimensi mesin: 180 x 157 x 298,5 cm Ukuran bukaan pengisian: 119,5 x 65 cm Kondisi: sangat baik! Ledpfx Aozdpctsptohh Video mesin dalam kondisi kerja tersedia atas permintaan.

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Powerline FA 500.3, en-001 Lodpfjy Anvrjx Aptshh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, b950a1bb-de28-44b2-afe9-bca823ad7d63 Ledpfozck Uiex Aptohh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Used vertical baler HSM V-Press 1160 Plus from 2015. The machine has been regularly serviced by an authorized service center. The press is fully operational and in very good technical and visual condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Material to be pressed: film, mixed paper, cardboard, cutting machine waste Freight costs depend on weight, volume, and above all on the distance. Relevant information for inquiries includes: delivery address (postal code and town); further details will require a phone conversation, so we kindly ask you to contact us by phone for information regarding transport costs and additional delivery conditions. Our contact details can be found under the legal information of the seller. Lhedpfxszck Tls Apteh Cash payment upon collection on site is possible. We sell and export worldwide. Thanks to our extensive storage capacity, we can deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices – excluding VAT. Opening hours: Mon-Fri: 8:00-16:00 Sat: closed

Kondisi: sangat baik (bekas), Balers HSM HL 4809 - Large filling opening, ideal for bulky cartons - Container tipper for convenient filling Pressing force in kN: 480 - Motor power in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions (L x W x H in mm): 1200 x 1100 x 750 - Machine dimensions (L x W x H in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4-fold with wire Lhodpfx Apjv Ak Npjtjh Year of manufacture: 2015-2017 Baler complete, side covers removed for transport Balers inspected by authorized service

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Merek: HSM Tipe: V-press 860 plus Tahun pembuatan: 2015 Ledpszcrhkofx Aptohh Tekanan tekan: 418 kN Tegangan: 400 V Berat bal maksimum: 480 kg (tergantung material) Dimensi bal: 120 x 120 x 78 cm Berat mesin: 2083 kg Dimensi mesin: 180 cm x 125 cm x 298,5 cm Ukuran bukaan pengisian: 120 cm x 65 cm Video mesin saat beroperasi tersedia atas permintaan Pengiriman cepat memungkinkan

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Tekanan tekan: 185 kN, dimensi bukaan pengisian: 1195x541 mm, berat bale maksimum tergantung bahan: 200 kg, dimensi bale maksimum: 1200x780x700 mm, kapasitas produksi: 2-5 bale/jam, waktu siklus tanpa beban: 35 detik, pengikatan: 4 kali dengan tali poliester, kapasitas penekanan tanpa beban: 68 m³/jam, dimensi ruang tekan: 1200x780x1300 mm, tegangan: 3x 400 V, daya motor: 3 kW, panjang: 1700 mm, lebar: 1046 mm, tinggi: 2370 mm, berat: 994 kg. Inspeksi di lokasi dimungkinkan. Ljdpfx Apozcfkfotjhh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, Perlengkapan: dokumentasi / manual, Used vertical baler HSM V-Press 1160 Plus from 2015. The machine has been regularly serviced by an authorized service center. The press is fully operational and in very good technical and visual condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Material to be pressed: film, mixed paper, cardboard, cutting machine waste Freight costs depend on weight, volume, and above all on the distance. Relevant information for inquiries includes: delivery address (postal code and town); further details will require a phone conversation, so we kindly ask you to contact us by phone for information regarding transport costs and additional delivery conditions. Our contact details can be found under the legal information of the seller. Cash payment upon collection on site is possible. We sell and export worldwide. Thanks to our extensive storage capacity, we can deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices – excluding VAT. Opening hours: Mon-Fri: 8:00-16:00 Lhjdozbrxgspfx Aptoh Sat: closed

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, 1 Lhodpfx Apoy I Rnujteh

Kondisi: baik (bekas), Tahun pembuatan: 2021, jam operasional: 245 h, Fungsionalitas: berfungsi sepenuhnya, Vertical Baler HSM V-Press 860 plus, Year of Manufacture 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theor. cycle time (idle): 25 s Theor. throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Remark: The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer specifications. We assume no liability for the information provided or for possible errors. Lsdpfsy Tvzdsx Aptshh Offers are subject to change, prior sale reserved, and can be revoked at any time. Viewings possible by arrangement. Sale from location, without guarantee or warranty. Our payment terms: 100% advance payment.