Beli Ima Bima 410V bekas (4.621)

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Ηλεκτρονικά ελεγχόμενο κέντρο κατεργασίας CNC με: • τυπικό τραπέζι • χαλάκια ασφαλείας • 1 αντλία κενού 100 m³/h • IMATRONIC-NT • πλευρικά προστατευτικά (δεξιά) • με πόρτα και (αριστερά εμπρός) • φορητή κονσόλα ρύθμισης για τα πείρους και τα μπουλόνια στερέωσης Τεχνικά χαρακτηριστικά: • Περιοχή κατεργασίας με τυπικές μονάδες X/Y 6000/1200mm • Μέγ. ύψος σύσφιξης από το επάνω άκρο της πλάκας κενού Z1 100mm • Μέγ. πάχος πανέλου Z2 ανάλογα με τη χρήση • Ύψος τραπεζιού εργασίας περίπου 1000mm • Εναλλακτική περιοχή χωρίς κυκλική διαδικασία X 2 x 2650mm Ελεύθερος χώρος στη μέση X 700mm • Με κυκλική επεξεργασία X 2 x 2250mm Ελεύθερος χώρος στη μέση X 1500mm • Κεντρική λίπανση • Τροφοδοσία ρεύματος 3/N/PE, 400/230 V • IMAwinCAD για μηχανές BIMA συμπεριλαμβανομένης συγκόλλησης ακμών • IMAWOP • Κύριο άτρακτο HSK F63/κώνος διαμέτρου 38mm/12kW/ψύξη με νερό • 1 ενότητα διάτρησης πριονιών • 1 ενότητα πριονίσματος αυλακιών • Συγκόλληση ακμών VT 61 Djdpfx Aewyvfceirsuu

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), Kompleks portal dengan dua zona kerja dan nesting dengan satu meja kerja: - Dua spindle kerja dengan magazin 18 slot; kiri dan kanan - Unit edge banding industri dengan magazin 12 slot edging; EVA, PUR - stasiun; - Stasiun tambahan poliuretan. Kompleks ini dimaksudkan untuk pemrosesan lengkap detail dari papan partikel dan MDF veneer, dll. - pemotongan detail dengan teknologi nesting dan pemrosesan lengkap pada pusat portal. Dusdoizi Ttopfx Airsu Harga tidak termasuk: - Transportasi - Pembongkaran - Pemasangan. Telah sepenuhnya diservis oleh tim Jerman dari IMA Schelling pada tahun 2022. Unit edge banding hampir tidak pernah digunakan.

Kondisi: bekas, Tahun pembuatan: 1994, Lokasi gudang: Nattheim Dujdpfjwmm Nrox Aireu

Kondisi: bekas, nomor mesin/kendaraan: 007841, arbeitsbereich_achse_x-arbeitsbereich_achse_y-arbeitsebene-leist ung_haupt_spindel-anz_kontrollierte_achsen-maximale_kantenhohe-an zahl_werkzeugplatze Duedpfx Aisyg Ef Doreu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 5.300 mm, jarak lintasan sumbu Y: 1.400 mm, jumlah sumbu: 4, daya motor spindle: 10.000 W, kecepatan spindel (maks.): 24.000 rpm, This 4-axis CNC machining center, IMA BIMA/300/125/530, was manufactured in 2012. It features a large working area with an X-axis travel of 5300 mm and a Y-axis travel of 1400 mm. The machine is equipped with a powerful main spindle offering a speed range of 0-24,000 rpm and an HSK F63 tool holder. If you are searching for high-quality CNC machining capabilities, you should consider the IMA BIMA/300/125/530 that we have available for sale. Please contact us for further details. Working Area • Y (main spindle + tool Ø20 mm): 1400 mm • Y (drilling unit, all vertical drills): 890 mm • Single-station processing: X = 2 × 2550 mm; center distance X = 200 mm • Rotary table processing: X = 2 × 2250 mm; clearance in the center = 800 mm Tool Magazine • Automatic tool/adapter changer, turret type, 18 positions Dsdpfx Aioy Tw Ilorjuu • Mounted on the support, traversable in X-direction Guides and Lubrication • Preloaded, surface-hardened precision roller guides on all axes • Manual central lubrication for the main axis linear guides and Z-axis ball screw Vacuum/Clamping and Table • 1 vacuum pump, 90 m³/h • Console table with 2 fixed right and 2 fixed left workpiece stops (X-direction) for Y-travel • 10 support arms, infinitely adjustable in X, each with rear stop • All stops CNC-controlled • Suction plates with patented dual-circuit clamping system (hoseless) • 8 smooth support rails, automatically lowerable • 2 mushroom push buttons for clamping/releasing Spindle and Machining Units • Main spindle: 10.0 kW (S6), 7.5 kW (S1); HSK F63 (Ø38 mm, per DIN 69893); 0–24,000 rpm, programmable • Centrally integrated CNC axis: 360° rotation for adapter units, torque support at main spindle, pneumatic interface • Drilling/grooving: Vertical drilling unit l14 with 6 horizontal spindles; horizontal units with 2 outputs each • Attached grooving saw unit, swiveling 0°/90° Control and Software • ICOS CNC control: PC-based, Windows UI, path control of all servo axes, job list/order management, IMA Backup & Recovery on two hard drives, UPS • IMAWOP software: dialog programming, 3D-view and basic simulation of workpieces, suction cups, holders, tools, and adapters Additional Equipment • Additional 2nd vacuum pump, 90 m³/h • Additional center stop rail for workpiece centering • Chip conveyor

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, IMA BIMA 300 CNC Machining Center For sale: IMA BIMA 300, a 4-axis CNC machining center with console table design. Basic specifications: Machining Area: - X-axis: approx. 5300 mm - Y-axis: up to approx. 1400 mm (depending on aggregate) - Max. workpiece height/clamping height: approx. 125 mm - Machine weight: approx. 6500 kg Machine construction and drive: - Steel frame with movable gantry in X, Y, and Z axes - Servo-driven axes with rack and pinion drive (X) and ball screw drives (Y/Z) Travel speeds: - X: up to 100 m/min - Y: up to 60 m/min - Z: up to 30 m/min Main spindle: - Power: 7.5 kW (S1) / 10 kW (S6) - Tool holder: HSK F63 - Speed range: up to 24,000 rpm - Programmable for clockwise/counterclockwise rotation Tooling and processing units: - Tool changer (rotary disc type) with approx. 18 magazine positions - CNC-controlled C-axis (360° rotatable) - Drilling aggregate with vertical and horizontal drilling spindles - Integrated slot saw - Interface for various adapter aggregates Table system / clamping technology: - Console table with 10 adjustable support arms and several suction cups (vacuum clamping system) - Two vacuum circuits, can be positioned depending on the workpiece - Second vacuum pump included (90 m³/h) Control and software: - ICOS CNC control unit - Programming via IMAWOP (dialog-based, graphical interface) - PC-based control with network connection Additional equipment: - Chip conveyor - Central lubrication for linear guides - Extraction connection (Ø 250 mm, approx. 4950 m³/h) - Safety features according to CE, with protective fencing and safety mats - Documentation and spare parts catalog included Electrical data: Dujdpfx Aijza Dm Hjreu - Power supply: 400/230 V, 50 Hz, 3N/PE Further details regarding equipment and condition are available upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Used CNC Machining Center Manufacturer: IMA Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table 8 manually movable supports in X direction, 3 vacuum cups per console, vacuum pump 90 m³/h vacuum connector for templates LED display for vacuum cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm (milling/drilling), Working area Z: 12 – 125 mm (clearance 150 mm) Additional central stop rail 14 vertical drilling spindles + 6 horizontal Horizontal drilling and grooving saw unit, swivels 90° Milling spindle 7.5 kW up to 18,000 rpm with C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer on y-support, traversing Edgebanding unit VT 100, 4-sided/all-round – swiveling range 740 degrees with dual-roll magazine, automatic granulate feed Adapter units: – Saw, fixed at 90° Dusdpfxjy Nzw Ns Aireu – 4-spindle crosshead Control: ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDE and production list software Safety fence on right side and front pressure-sensitive mats; rear: wall installation or separate safeguarding required

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jumlah sumbu: 3, This 3-axis CNC woodworking center, IMA BIMA 410, was manufactured in 2000. It features a working area of 3000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking for high-quality woodworking capabilities, you should consider the IMA BIMA 410, which we are offering for sale. Please contact us for further details. Working area X: 3000 mm Working area Y: 1200 mm Max. clamping height Z1: 100 mm Max. workpiece thickness Z2: depending on configuration/application Table height: approx. 1000 mm Pendulum operation X: 2 × 1400 mm Clearance in center X: 200 mm Alternative pendulum operation X: 2 × 900 mm Alternative center clearance X: 1200 mm Machine weight: approx. 6000 kg Guide system: precision linear guides, hardened approx. 62 HRC Central lubrication: automatic for all main axes and ball screw Drive system: AC servo motors with encoders X/Y drive: rack and pinion Z drive: ball screw Feed speed: 40 m/min Rapid traverse X/Y: 80 m/min Rapid traverse Z: 25 m/min Acceleration: 3 m/s² Main spindle extraction port: 300 mm Drilling spindle extraction port: 120 mm Air velocity: approx. 28 m/s Air volume: approx. 7080 m³/h Vacuum pump capacity: 100 m³/h Compressed air connection: 1/2" Operating air pressure: 6 bar Control voltage: 24 V DC Connected load: approx. 24 kVA Power supply: 3/N/PE 400/230 V 50 Hz Frequency inverter: 0-480 Hz Ambient temperature: +15 to +35 °C Control system: IMATRONIC NT 231 Interpolation: linear all axes, circular 2.5D Resolution: 0.001 mm Spindle: HSK F63 Tool clamping force: 11000 N Max. tool weight: 6 kg Speed range: 1500-18000 rpm Spindle power: 7.5 kW Cooling: water-cooled Dodpfxey Aw N Uo Airsuu CNC axis: 360° rotatable Tool magazine type: plate changer Tool positions: 18 Maximum tool length: 150 mm Maximum tool diameter: 100 mm (150 mm with empty adjacent positions) Maximum load: 60 kg Saw unit motor: 1.5 kW Saw speed: 5600 rpm Max. saw blade diameter: 150 mm Drilling unit: 14 spindles Spindle stroke: 70 mm Drive: 2.2 kW Speed: 3150 rpm Max. drill diameter: 20 mm Adapter head spindles: 4 Max. speed: 6000 rpm Max. drill diameter: 12 mm Table equipment: 6 adjustable support arms 12 suction cups 114 × 159 × 100 mm 6 suction cups 125 × 75 × 100 mm Vacuum system: 2-circuit clamping system Control cabinet size: 2000 × 1800 × 600 mm DEFECT: The main spindle no longer releases the exchangeable drilling head.

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats included. PC control system type ICOS OPEN CNC with IMAWOP software. Work tables configured as console tables (No. 8 consoles, table width 1400 mm). Console table with LED/strip lighting. Automatic tool change system (magazine capacity – 18 slots). Useful working area (X-Y-Z): 4000 x 2100 x 300 mm. Useful working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. 2 working areas. Vacuum pump / capacity: 140 m³/h. Chip conveyor. With separate electrical and control cabinet. Total connected load: 32 kW. Working units (Upper): - No. 21 independent vertical drilling spindles (4 x 1.2 kW) - No. 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edgebanding unit, edge banding aggregate (hot melt glue) VT 100 - Edgebanding material (rolls), thickness (min/max): 0.4 / 3 mm - Edgeband magazine for rolls (No. 2 compartments) Dedpfx Ashu U Nxeirsuu OPTIONS: - Saw unit, max diameter 200 mm - Combination unit (flush milling and profile scraper) - Drilling head (with No. 4 horizontal drilling spindles)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control unit: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area (X - Y - Z) for edgebanding (mm): 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - mm 1200 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) Duedpefbmqtefx Airsu No. 1 vacuum pump (capacity: 140 m3/h) Safety enclosure for the working head, safety foot mats Chip conveyor belt No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool stations No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit - edgebander (hot melt glue) VT 50 Edge magazine for rolls (compartment no. 6) OPTIONALS: No. 1 adapter unit for saw, fixed at 90 degrees, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraping No. 1 adapter unit, horizontal drilling and milling head (cross head), 4 horizontal spindles

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Dusdstixpujpfx Airju Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) in edge banding (mm): 3100 x 1925 x 60 No. 6 clamping table with consoles (number of consoles) – mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety tread mats No. 1 vertical main spindle (milling units) HSK F63 (18 kW) Automatic tool change system (rotary tool changer) with 18 tool positions No. 14 independent vertical drilling spindles (2 × 1.2 kW) Cross-unit with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – application head (hot melt glue) VT 100 No. 2 edge magazine for rolls Duedpfeq Nmutjx Airju OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Dsdpfx Aisw A Ruqsrjuu Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 24205, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 4.800 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 100 mm, panjang benda kerja (maks.): 4.800 mm, lebar benda kerja (maks.): 1.800 mm, jumlah slot dalam magazin alat: 18, berat keseluruhan: 16.000 kg, daya motor spindle: 12.000 W, jumlah spindel: 1, diameter benda kerja (maks.): 1.800 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Außergewöhnliche Maschine mit herausragender Bearbeitungsqualität. Die Maschine wurde durch IMA-Techniker gewartet, wobei ausschließlich Original-Ersatzteile verwendet wurden. Die Lichtwellenleiter sowie die Mehrheit der Druckluftleitungen wurden durch Neuteile ersetzt. Die automatische Positionierung der Vakuumsauger beschleunigt die Einrichtzeit erheblich. Mit ImaWoop Version 6.0 inklusive Quicktool gestaltet sich die Bedienung besonders benutzerfreundlich. Eine Besichtigung der Maschine im Betrieb ist jederzeit möglich. Alternativ bieten wir Ihnen gerne eine Live-Videoübertragung zur Visualisierung der laufenden Maschine an. CNC-Portal-Bearbeitungszentrum Hersteller: IMA Typ: BIMA P 480 V, 180/480 Baujahr: 2001 Kurzbeschreibung: Hochflexible Maschine für vielseitige, komplexe Bearbeitungsaufgaben (Fräsen, Bohren, Sägen, Kantenanleimung, diverse Winkelschnitte) - alternierende Bearbeitung - X = 2 x 2.400 mm, Y = 1.800 mm - Hauptspindel 12 kW - 18-fach Werkzeugwechsler - Kantenanleimaggregat mit 6-fach Rollenmagazin Beschreibung: Bearbeitungsbereich mit Standardaggregaten: Y = 1.800 mm Tischbereich für alternierende Bearbeitung: X = 2 x 2.400 mm (Fräs- und Bohrbearbeitung) X = 2 x 2.100 mm (Kantenanleimung) CNC-Steuerung: IMATRONIC NT 231 Software: ImaWoop 6.0 - automatische Positionierung der Vakuum­sauger - automatische Zentralschmierung - Förderband für Späne und Abfall (Bandförderer) Hauptspindel 12 kW mit integrierter C-Achse (360 Grad) Automatischer 18-fach Werkzeug-/Adapterwechsler 1 Kantenanleimaggregat VT100 mit Leimauftragseinheit - Kantenstärke: 0,4 – 3 mm - Für 4-seitige Kantenanleimung und umlaufende Kantenanleimung auf Stoß - 6-fach Rollenmagazin 1 Endbesäumaggregat, 0,8 kW Inklusive Adapteraggregate: - Säge, fest 90 Grad - Horizontalbohraggregat (4-fach) - ABS-Kantenfräsaggregat Dusdett Rpwopfx Airju - ABS-Kantenradius- und Flächenabziehaggregat Weitere Adapter und Werkzeuge gegen Aufpreis verfügbar Spanabtransport über Gurtförderer Klimatisierter Schaltschrank inklusive

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 24406, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 900 h, tegangan masuk: 400 V, frekuensi input: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – technical specifications (main) 🔹 Working area (axis travels) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, panel nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Functions and equipment (typical) • 5-sided drilling (top + X+/X−/Y+/Y− edges) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel cutting combined with machining) • Automatic lubrication • Waste and chip conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture typically found on the market: approx. 2010–2016 (often 2014) • Application: furniture, MDF panels, HPL, solid wood, nesting Dsdpjykn Dwjfx Aireuu

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Vacuum system with programmable suction units for lifting panels onto the conveyor belt Dedjvxhnuspfx Airsuu Panel outfeed system with motorized conveyor belts

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, IMA BIMA CUT Rentang kerja (perpindahan sumbu) Duodpfxjyzc Nkj Airju • Sumbu X: ± 3300 mm • Sumbu Y: ± 1450 mm • Jumlah sumbu: 3 (umumnya X, Y, Z) Spindle • Daya spindle: ± 18 kW dan 12 kW • Penggunaan: milling, pengeboran, nesting panel, pelapisan lengkung Magasin alat • Pergantian alat otomatis (ATC): hingga 18 posisi Sistem penjepit material • Meja vakum dengan balok dan cup penghisap yang diposisikan otomatis 🛠️ Fitur & perlengkapan (standar) • Pengeboran dari 5 sisi (atas + sisi X+/X−/Y+/Y−) • Agregat gergaji untuk pemotongan dan penggrooving • Opsi agregat milling horizontal (HBO) • Meja pemuatan & pembongkaran otomatis (tergantung konfigurasi) • Sistem nesting (pemotongan panel dengan pemrosesan simultan) • Pelumasan otomatis • Pembuangan limbah dan serbuk (konveyor sabuk)

Kondisi: bekas, nomor mesin/kendaraan: 007842, arbeitsbereich-achse-x-5000-mm-arbeitsbereich-achse-y-1200-mm-ar beitsebene-mit-vakuum-konsolenauflagen-leistung-haupt-spindel-18- kw-anz-kontrollierte-achsen-4-achsen-maximale-kantenhoehe-64-mm-a nzahl-bohrspindeln-14-anzahl-werkzeugplaetze-18 Duodpfeyhbiuex Airsu

Kondisi: bekas, nomor mesin/kendaraan: 006054, Area kerja sumbu X: 5300 mm Area kerja sumbu Y: 1300 mm Permukaan kerja: Dengan penyangga konsol vakum Dsdpfjwcx T Usx Aireuu Daya spindle utama: 9 KW Jumlah sumbu yang dikontrol: 5 sumbu Jumlah spindle bor: 32 Jumlah tempat alat: 8

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 80.859 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.630 mm, RINCIAN TEKNIS Perjalanan sumbu X tanpa pengeleman: 6.000 mm Perjalanan sumbu X dengan pengeleman: 5.000 mm Perjalanan sumbu Y: 1.300 mm Perjalanan sumbu Y dengan spindle utama + diameter alat 20 mm: 1.630 mm Perjalanan sumbu Y dengan pengeleman: 1.450 mm Duodpex Af Ivjfx Airsu Meja setting: Dyna Poin BIMA 410 V Pengisian: 4 tempat Unit pelapis tepi: tersedia Jam operasional: 80.859 jam

Kondisi: bekas, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support panel for positioning vacuum cups. Vacuum cups can be positioned manually on the work surface using a laser indicator. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles, arranged as follows: * 11 vertical spindles on the X-axis * 10 vertical spindles on the Y-axis. Edge banding unit with glue pot and premelter for EVA glue (glue pot new in 2023). Nordson premelter unit for PUR bonding of foldable panels. No. 1 trimming unit (end cutter). No. 1 milling unit. No. 1 cross unit with 4 horizontal drilling lines. No. 1 blower unit. Edge storage unit with 2 positions. Carpet front protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS NEED TO BE VERIFIED. Duodpjw El Nhsfx Airsu

Kondisi: bekas, nomor mesin/kendaraan: 005637, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Mesin pelapis tepi: Mesin 1 Dodovw Ev Hjpfx Airsuu Lebar panel maksimum: 1300 mm Kecepatan maju maksimum: 50 m/menit Unit kerja, sisi kanan: 11 unit Unit kerja, sisi kiri: 12 unit

Kondisi: bekas, nomor mesin/kendaraan: 006017, Posisi 2: Mesin pemotong panel model sudut IMA-COMBIMA SYSTEMS/N/I/R75/1110 Dedpfxewukzho Aireuu

Kondisi: bekas, nomor mesin/kendaraan: 005635, 1 Djdpfowuudyox Airsuu

Kondisi: bekas, nomor mesin/kendaraan: 005642, Mesin pelapis tepi dua sisi IMA + MEINERT-COMBIMA/II/650/A/R3 Dusdpfx Aiewuciwsreu