Beli Kellenberger Kel-Varia Ur225-1500 1-2-6-7 bekas (119.995)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Godpfxouxfu Ne Aiyjit Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: bekas, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, utmost accuracy, and reliable operation. Specifications: Centre height: 175 mm, Centre distance: 1,500 mm, Z-axis travel: 1,650 mm, Maximum workpiece weight: 150 kg. Grinding wheel options: Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); Grinding spindle travel max.: 320 mm. Technical data: Infinitely variable grinding wheel speed 1,000–2,150 rpm (peripheral speed 45 m/s); Feed rate 7,500 mm/min; Workhead swiveling -10/+100° with 8–800 rpm; Max. torque 160 Nm; Grinding spindle motor: 7.5 kW, Workhead motor: 2 kW; Power supply: 3×400 V 50 Hz; Rapid traverse: 15 m/min; Weight approx. 6,000 kg; Dimensions: 4,700×2,300×2,000 mm; Compressed air: 6 bar. Included accessories: Coolant system, paper band filter system, MARPOSS touch probe, set of grinding wheels, live centre, set of centers, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/fume extraction, collet chuck. Gijdpsyxn Itefx Aiyot Achieves tight tole...

Kondisi: bekas, KELLENBERGER_KEL‑VARIA_R175_x_1500_CNC_Rundschleifmaschine Gedpfoyxn A Rox Aiyoit

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left grinding wheel 600 mm Grinding spindle headstock fixed, not swivelling. Gsdpfx Aot Ii Rfsiysit Equipped with new FAGOR control system and BEMA cylindrical grinding interface. Fitted with a new, maintenance-friendly enclosure. Completely overhauled according to Kellenberger inspection protocol.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Gijdpfxouxfuco Aiyet Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 2000, Grinding diameter 450 mm Grinding length 1000 mm Centre height 225 mm Photo shown is of a previously delivered machine with similar configuration: - Major overhaul - Table geometry renewed - Partial interior repainting Grinding wheel assembly LEFT: 400x63x127 mm (standard) Grinding wheel assembly RIGHT: 300x40x127 mm Internal grinding attachment Ø120 mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding, Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35 m/s or 45 m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for tailstock NO fine adjustment on the tailstock Spring-loaded quill insert Upper table cooling Standard workpiece spindle head MK 5, DIN 55026, size 5" MICRO-adjustment for the standard workpiece spindle head Dressing device under the table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measurement system KELSET, MARPOSS Gedpfx Aisxzk Nieysit Touch sensor MARPOSS Measuring control MARPOSS Minialsar prepared Paper band filter

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m As a world leader in the field of Kellenberger overhauling/retrofit, we are not only able to deliver machines in new-machine quality and with warranty, but can also provide service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA round grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales on x and z axes - New absolute rotary encoder (for B axis) Standard equipment: - Tailstock with Morse taper MK5, optionally with MK5/short taper adapter - Steady rest with MK4 taper, optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding device belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing from ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - High-precision, highly tilt-resistant workpiece spindle stock - Measurement control - Extraction system - Paper band filter Gsdpfxouwv H Te Aiyoit Control: Grinding basic cycles: - Zero the workpiece with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirements approx. 3.6/3.5 m As a world-leading company in the field of Kellenberger – Overhaul / Retrofit, we are not only able to deliver the machines in as-new condition with warranty, but can also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B-axis high resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP Control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - Ultra-precise, high-stiffness workpiece spindle head - Measuring control - Extraction unit - Paper band filter Gedpfx Aijuwv H Hoysit Control: Basic grinding cycles: - Zeroing workpiece with Z-Pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Diamond dresser measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine-parameter-2024 Gedpfx Asyatx Seiyeit

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine_01 Godpfxjxyadao Aiyeit

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 320 mm, jarak gerak sumbu Z: 1.150 mm, produsen pengendali: HEIDENHAIN, berat keseluruhan: 6.000 kg, Mesin gerinda KELLENBERGER KEL VARIA RS 175/1000 ini diproduksi pada tahun 2004 di Swiss. Mesin ini dilengkapi dengan kontrol HEIDENHAIN. Keunggulan mesin Keunggulan Kualitatif • Kondisi baik Keunggulan Teknis • Jarak antara senter: 1000 mm Godpfxjyi Elio Aiysit • Tinggi senter: 175 mm • Dimensi batu gerinda kanan Ø 400 x 50 mm • Pergerakan kepala batu gerinda -210°/+30° • Kecepatan rotasi 8-800 rpm • Tipe spindle: CM5

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1500 mm Center height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. New servo motors in X-axis and for the workpiece headstock. Photo shows a machine already delivered in UR configuration. -The touch-panel operation is extremely user-friendly. -The symbols on the control panel are practically identical to the original control system, eliminating the need for retraining. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be expanded or modified according to customer specifications. -Workpiece spindle oriented stop available upon request. -New maximum infeed amount of 40 mm, can be further increased upon request. -Digital readout in 2 axes. X-axis resolution: 0.5 μm. Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment -Increase of center height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine is equipped with an electronically controlled infeed system in the X-axis, driven by stepper motor. Hydraulic longitudinal and rapid traverse movement of the table. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stipulated in the BetrSichV 2015. An assessment of the required minimum protection objectives must be determined via a risk assessment according to BetrSichV. Gedpfx Aiouwv Idoysit

Kondisi: bekas, EN: Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0–40 mm / Ø Continuous feed: 0–40 mm / Ø Table swivelling range: ±6.5° Table longitudinal travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece max. weight (unsupported): 130 kg incl. clamping Maximum transverse movement: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill travel: 30 mm Gsdpfx Asuxftreiyeit Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, state-of-the-art and future-proof CNC control. Photo shows a machine already delivered with special options. - Operation via touchscreen panel is extremely user-friendly. - The icons on the control panel are practically identical to the original control, so no re-training is necessary. - Diagnostic function with display of PLC messages and digital I/O - Infeed dressing function can be extended or modified as per customer requirements. - Optional indexed spindle stop for the workpiece spindle available. - New maximum infeed travel: 40 mm (can be further increased on request). - Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment not possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories on request. Machine is equipped with an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal feed and rapid traverse. Highly versatile for external and internal cylindrical grinding, or for external, face and internal grinding of single parts in a single clamping. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - In-process measuring control Please note: At present, the machine does not comply with the essential safety and protection requirements as required under BetrSichV 2015 (German Ordinance on Industrial Safety and Health). An increase of the minimum required safety target must be determined through a risk assessment in accordance with BetrSichV.

Kondisi: diremaj di bengkel (bekas), KELLENBERGER_KEL-VISTA_UR_175X600_DE_TECHNISCHE_BESCHREIBUNG Gjdjyxn Iyjpfx Aiysit

Kondisi: baru, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 sistem pengukuran sudut, nomor seri sesuai foto, belum pernah digunakan dalam kemasan asli yang sudah dibuka, 100% berfungsi, cakupan pengiriman sesuai foto. Gisdei Ea Uyepfx Aiyot

Kondisi: baru, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 sistem pengukur sudut, nomor seri sesuai foto, belum pernah digunakan dalam kemasan asli yang sudah dibuka, 100% berfungsi, cakupan pengiriman sesuai foto Gjdpfx Aiei Ea Uvoyoit

Kondisi: baru, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 sistem pengukuran sudut, nomor seri sesuai foto, belum pernah digunakan dalam kemasan asli terbuka, 100% berfungsi, paket pengiriman sesuai foto Gsdpfx Aioi Ea U Dsyeit

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NEW-21, berat kosong: 462 kg, berat muatan maksimum: 1.038 kg, berat keseluruhan: 1.500 kg, konfigurasi gandar: 1 as, panjang ruang muatan: 2.760 mm, lebar ruang muat: 150 mm, tinggi ruang muatan: 300 mm, kecepatan maksimum: 100 km/j, rem trailer: trailer dengan rem, Tahun pembuatan: 2026,

Kondisi: baru, nomor mesin/kendaraan: NEW-7, berat kosong: 326 kg, berat muatan maksimum: 1.174 kg, berat keseluruhan: 1.500 kg, konfigurasi gandar: 1 as, panjang ruang muatan: 2.760 mm, lebar ruang muat: 1.500 mm, tinggi ruang muatan: 300 mm, suspensi: lain, ukuran ban: 195 / 50 R 13, kecepatan maksimum: 100 km/j, warna: perak, rem trailer: trailer dengan rem, Tahun pembuatan: 2026, rem: lain,

Kondisi: bekas, jarak tempuh: 247.950 km, daya: 155 kW (210,74 hp), pendaftaran pertama: 09/2020, jenis bahan bakar: diesel, berat keseluruhan: 7.490 kg, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 2, volume ruang muat: 35 m³, panjang ruang muatan: 7.050 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.000 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, pendingin udara, program stabilitas elektronik (ESP), tail lift,

Kondisi: bekas, jarak tempuh: 247.950 km, daya: 155 kW (210,74 hp), pendaftaran pertama: 09/2020, jenis bahan bakar: diesel, berat keseluruhan: 7.490 kg, konfigurasi gandar: 2 gandar, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, volume ruang muat: 35 m³, panjang ruang muatan: 7.050 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.000 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, pendingin udara, program stabilitas elektronik (ESP), tail lift,

Kondisi: bekas, Technical Details: Table length: 2000 mm Table width: 1500 mm Table height: 820 mm Table thickness: 185 mm Approx. machine weight: approx. 2.1 / 2.2 t per plate Transport dimensions (LxWxH): approx. 2.0 x 1.5 m / per plate There are 6 of these clamping plates available for sale. (Price per piece) Material: cast steel / profile cast T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm Gedpfxou N D Rdo Aiyeit 4x through holes Ø 90 mm 10x mounting holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for plate no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for plate no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, schleifmaschine-parameter-01 Gsdpfeyb S Rcsx Aiysit

Kondisi: diremaj di bengkel (bekas), KELLENBERGER 600 U 175 ist eine Rundschleifmaschine hoher Präzision, exakt und zuverlässig. Kapazität: Spitzenhöhe 175 mm, Spitzenweite 600 mm; Schleifscheibe Ø350×50 mm, Bohrung 127 mm; Schleifkopf 270°. Technische Daten: Scheibendrehzahl 1500–3600 t/min (4 Stufen); Werkstückspindel 20–400 t/min (stufenlos); Tischneigung 10°, bis 6 m/min; Anschluss 3×380 V 50 Hz; Schleifspindelmotor 4 CV; Gewicht ≈2200 kg; Maße 3000×1750×1600 mm. Zubehör: Digitalanzeige 2 Achsen, Reitstock mit Feinverstellung, Innen-Schleifeinrichtung, Schleifscheibenschutz, Schutzvorrichtung, Schiebetür. Eignet sich für enge Toleranzen in Automotive, Uhren, Werkzeugbau, Luftfahrt und Medizintechnik. Gisdpeyxn Duofx Aiyet

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 125 mm, panjang penggilingan: 600 mm, diameter penggilingan: 249 mm, panjang kabinet kontrol: 1.200 mm, lebar kabinet kontrol: 40 mm, kecepatan spindle penggilingan: 1.530 rpm, tinggi kabinet kontrol: 1.500 mm, berat keseluruhan: 3.250 kg, This listing is for a cylindrical grinding machine from the manufacturer Kellenberger. The machine is in very good condition. Manufacturer: Kellenberger Model: R 125x600 Technical data: Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Giodpfxeyyn Ehe Aiyst Travel: 700 mm Travel per handwheel revolution, coarse/fine: 20/2.5 mm Hydraulic stepless speed: 0.02–6 m/min Minimum reversal travel: 1.5 mm Reversal dwell time, stepless: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with handwheel, coarse/fine: 220 mm Travel per handwheel revolution, coarse/fine: 4/0.5 mm Rapid and return travel, hydraulic: 50 mm Infeed, electro-mechanical with stepper motor: 0–9.99 mm/ø Micro-stop infeed per division: 1 µm/ø Plunge grinding: Infeed speed coarse/fine: 1–49 / 0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor power: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Internal taper of spindle: Morse 5 Motor power: 0.9 kW Tailstock: Internal taper of sleeve: Morse 3 Sleeve travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg