Beli Kellenberger Kel-Vita Mit Lader bekas (12.529)

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Hsdpjvdk N Eofx Aa Iop Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1,000 mm Center height: 175 mm Control: Fanuc 310is CNC control: GE Fanuc 310is Hand panel for GE Fanuc CNC control Overhauled according to Kellenberger protocol Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel left: 500 x 80 mm Grinding wheel right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the top table Swiveling holder for PCD diamond dressing plates Base module for KEL-TOUCH in-process gauging sensor and KEL-BALANCE balancing systems KEL-TOUCH in-process sensor for universal grinding head variants R / RS / UR / URS Hedpfoy U N Hijx Aa Iop KEL-TOUCH at the workpiece spindle stock for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Prepared for external filter Coolant shutdown for table units Full enclosure – emulsion Grinding mist extraction unit – emulsion Maintenance unit for pneumatic auxiliary functions Prepared for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for steady rest (Arobo steady rest)

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 125 mm, berat keseluruhan: 4.700 kg, kellenberger_kel_vision_2004 Hedpfx Aey Uriaja Isp

Kondisi: bekas, 1 Hodpfx Aasy Tb Aas Iep

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine-parameter-2024 Hodjyatx Sspfx Aa Ijp

Kondisi: baik (bekas), mesin penggiling silinder Hodpfxetrguko Aa Isp

Kondisi: bekas, Tahun pembuatan: 2000, Diameter grinding: 450 mm Grinding length: 1000 mm Center height: 225 mm The machine was partially overhauled with new geometry and had only been in operation for a few weeks before being resold due to insolvency. Photo shows the complete machine of a nearly identical model. Hedpjxzk Niofx Aa Iop Photo of the interior and workpiece spindle head are from the original machine. - Major maintenance - New table geometry - Partial repainting in the interior Grinding wheel setup LEFT: 400x63x127mm (standard) Grinding wheel setup RIGHT: 300x40x127mm Internal grinding device Ø120mm for HF spindles CNC control: KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for tailstock NO micro-adjustment on tailstock Spring-loaded quill insert Upper table cooling Standard workpiece spindle head MK 5 DIN 55026, size 5" MICRO-adjustment for the standard workpiece spindle head Dressing device on lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on grinding head Tool measurement system KELSET, MARPOSS Marposs touch sensor Measuring control MARPOSS Minialsar prepared Paper band filter

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665100, berat keseluruhan: 4.700 kg, tinggi pusat: 125 mm, Mesin gerinda silinder dengan robot! RINCIAN TEKNIS Hedpfxjzcwfue Aa Isp Tinggi pusat: 125 mm RINCIAN MESIN Kendali: Fanuc 18i-T Berat total: 4.700 kg JAM OPERASI Waktu otomatis (sesuai gambar): 41.411 jam Waktu pengumpanan (sesuai gambar): 14.251 jam PERLENGKAPAN Robot Universalrobots UR5 Aksesori standar 1 perlengkapan roda gerinda kanan 500 x 110 x 203,2 mm 1 lengan putar manual "komponen berputar" dengan pengindeksan manual setiap 2,5 derajat Perangkat penyeimbang otomatis MARPOSS tipe E 82 Retraksi pinol hidrolik untuk tailstock Pemantauan gerak tailstock Kepala spindel benda kerja standar MK 5 DIN 55026 ukuran 5"

Kondisi: bekas, Tahun pembuatan: 1999, Diameter penggerindaan 350 mm Panjang penggerindaan 1000 mm Tinggi pusat 175 mm Kontrol FANUC 18i-TA TELAH DIREKONDISI UMUM Foto mesin serupa yang sudah dikirim - Perlengkapan batu gerinda KIRI 500 mm - Perlengkapan batu gerinda KANAN 400 mm - Perangkat gerinda dalam 120 mm untuk spindle gerinda dalam berpenggerak sabuk (standar) - Kontrol CNC FANUC 18i-TA Hodpfxey U N Hpj Aa Isp - Disiapkan untuk pengendalian pengukuran kombinasi Marposs (Minialsar, Positionar) dengan E5N - Sumbu B - Kel-Set - Penarikan pinol hidraulis - Penyetelan mikro pada tailstock - Kepala spindle benda kerja dengan bagian bawah yang dapat diputar

Kondisi: diremaj di bengkel (bekas), KELLENBERGER_KEL-VISTA_UR_175X600_DE_TECHNISCHE_BESCHREIBUNG Hsdpeyxn Iyjfx Aa Iop

Kondisi: bekas, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, utmost accuracy, and reliable operation. Specifications: Centre height: 175 mm, Centre distance: 1,500 mm, Z-axis travel: 1,650 mm, Maximum workpiece weight: 150 kg. Grinding wheel options: Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); Grinding spindle travel max.: 320 mm. Technical data: Infinitely variable grinding wheel speed 1,000–2,150 rpm (peripheral speed 45 m/s); Feed rate 7,500 mm/min; Workhead swiveling -10/+100° with 8–800 rpm; Max. torque 160 Nm; Grinding spindle motor: 7.5 kW, Workhead motor: 2 kW; Power supply: 3×400 V 50 Hz; Rapid traverse: 15 m/min; Weight approx. 6,000 kg; Dimensions: 4,700×2,300×2,000 mm; Compressed air: 6 bar. Included accessories: Coolant system, paper band filter system, MARPOSS touch probe, set of grinding wheels, live centre, set of centers, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/fume extraction, collet chuck. Hodpfx Aaoyxn Ite Isp Achieves tight tole...

Kondisi: bekas, KELLENBERGER_KEL‑VARIA_R175_x_1500_CNC_Rundschleifmaschine Hjdpoyxn A Refx Aa Iep

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 320 mm, jarak gerak sumbu Z: 1.150 mm, produsen pengendali: HEIDENHAIN, berat keseluruhan: 6.000 kg, Mesin gerinda KELLENBERGER KEL VARIA RS 175/1000 ini diproduksi pada tahun 2004 di Swiss. Mesin ini dilengkapi dengan kontrol HEIDENHAIN. Keunggulan mesin Keunggulan Kualitatif • Kondisi baik Hodpfsyi Eliox Aa Isp Keunggulan Teknis • Jarak antara senter: 1000 mm • Tinggi senter: 175 mm • Dimensi batu gerinda kanan Ø 400 x 50 mm • Pergerakan kepala batu gerinda -210°/+30° • Kecepatan rotasi 8-800 rpm • Tipe spindle: CM5

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m As a world leader in the field of Kellenberger overhauling/retrofit, we are not only able to deliver machines in new-machine quality and with warranty, but can also provide service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: Hjdpfx Aeuwv H Tja Ijp - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA round grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales on x and z axes - New absolute rotary encoder (for B axis) Standard equipment: - Tailstock with Morse taper MK5, optionally with MK5/short taper adapter - Steady rest with MK4 taper, optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding device belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing from ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - High-precision, highly tilt-resistant workpiece spindle stock - Measurement control - Extraction system - Paper band filter Control: Grinding basic cycles: - Zero the workpiece with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirements approx. 3.6/3.5 m As a world-leading company in the field of Kellenberger – Overhaul / Retrofit, we are not only able to deliver the machines in as-new condition with warranty, but can also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW Hodpouwv H Hsfx Aa Iep - B-axis high resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP Control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - Ultra-precise, high-stiffness workpiece spindle head - Measuring control - Extraction unit - Paper band filter Control: Basic grinding cycles: - Zeroing workpiece with Z-Pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Diamond dresser measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system Hodpfx Asuxfu Nea Iep -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Hodpfx Aeuxfucea Iop Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide Hsdot Ii Nbjpfx Aa Iep - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left grinding wheel 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR control system and BEMA cylindrical grinding interface. Hjdot Ii Rfspfx Aa Ijp Fitted with a new, maintenance-friendly enclosure. Completely overhauled according to Kellenberger inspection protocol.

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine_01 Hsdpfjxyadaex Aa Ijp

Kondisi: bekas, specs-001 Hsdpfx Aasxmg Ekj Iep

Kondisi: sangat baik (bekas), KELLENBERGER MESIN GERINDA SILINDER UNIVERSAL PRESISI TIPE: 600 U TAHUN PEMBUATAN: 2003 OVERHAUL SEBAGIAN: 2026 (Data teknis lihat dokumen terlampir) Tinggi senter: 175 mm (tanpa penyesuaian ketinggian) Panjang gerinda: 600 mm Perlengkapan: - Aksesori standar - Perangkat gerinda dalam untuk Ø 80 mm maks., termasuk saluran pendingin melalui spindle benda kerja - Perangkat batu gerinda kiri untuk Ø 400 x 50 x 127 mm (standar) - Perangkat batu gerinda kanan untuk Ø 300 x 40 x 127 - Flens batu gerinda untuk batu Ø 400 x 50 x 127 mm (kiri) dan Ø 300 x 40 x 127 (kanan), pemberat penyeimbang luar (3 buah kiri, 2 buah kanan) - Penggerak spindle variabel dengan inverter frekuensi Danfoss - Perangkat penyeimbang untuk penyeimbangan dinamis tipe ELASO MANOBALANCE 750/EB 2000 - Spindle gerinda dalam RENAUD tipe REN 828 (pelumasan gemuk dengan udara pengunci) - Berbagai arbor gerinda dalam untuk REN 828: 1235, 1645, 2060, 2575 (4 buah) - Berbagai chuck penjepit HJNZ 28 untuk HJN 828 dengan 2 collet Ø 3 mm dan Ø 6 mm - Spindel benda kerja standar MK 5 dengan flens adaptor DIN 55027 Ukuran 5” Lubang Ø 38,2 mm (standar) - Penggaris sinus pada spindle benda kerja - Tailstock dengan penarikan tangan untuk perjalanan pinol - Penyetelan mikro pada tailstock - Pelepasan pneumatis pada tailstock - FORKARDT Chuck tiga rahang spiral datar Ø 200 mm - REISHAUER Chuck tiga rahang batang slid Ø 160 mm - Permanent magnetic chuck Ø 200 mm - Perangkat collet untuk Schaublin B32 - Set 59 pcs collet Schaublin B32, Ø 1,0 – 30,0 mm, interval 0,5 mm - Set 8 pcs penahan benda kerja termasuk bracket - Steady rest tiga rahang, 175 mm, dapat dibuka, Ø 3-120 mm - Perangkat dresser putar untuk dressing eksternal, planar, atau internal - Perangkat dresser samping dan miring untuk dressing sisi/miring batu gerinda - Stop dial indikator untuk kemiringan meja dengan dial indikator 1/100 mm - Stop dial indikator untuk pergerakan longitudinal meja dengan dial indikator 1/100 mm - Stop dresser untuk gerinda internal - HEIDENHAIN sistem pengukuran panjang digital untuk sumbu X dan Z - STREULI filter pita kertas SPB 3, 90 l/min pada 0,26 bar, kapasitas tangki 240 l - Lampu mesin WALDMANN - Set alas peredam getaran - Cat tiga warna (abu-abu muda RAL 7035/biru RAL 5012/abu-abu tua RAL 7016) Hsdpfx Aaszhma Dj Iop - Protokol penerimaan baru sesuai standar KELLENBERGER - CE-Conformity - Dokumentasi Kondisi: sangat baik, mesin direkondisi secara geometris dan mekanis (lihat protokol geometris)

Kondisi: baik (bekas), Tahun pembuatan: 2003, Ref. No.: 10618 Manufacturer: KELLENBERGER Hjdpfeya Dagsx Aa Iop Model: 600 U No. 33 Year of manufacture: 2003 Control type: Conventional Control: n/a Location: Halberstadt Country of origin: Switzerland Distance between centres: 600 mm Centre height (standard): 125 mm Centre height with raised headstock and tailstock blocks: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel, each side: 10° Table reversal dwell time: 0 - 5 sec Diameter / Width / Bore: 250 x 13 x 76 mm Grinding spindle speeds: 1500 / 1700 / 2200 / 3600 rpm Grinding head swiveling range: 360° Cross travel of grinding head: 285 mm Rapid infeed/retraction of wheelhead: 40 mm Incremental feed per table reversal: 0.001 - 0.03 mm/dia Micrometer fine feed, 1 scale division: 0.001 mm/Ø Infinitely variable working speeds (normal / special): 20-400 / 10-400 Max. grinding length: 900 mm Additional Information: Machine can be inspected under power.

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 175 mm, lebar di tengah: 1.000 mm, KELLENBERGER-1000U-2026-DE-ADV Hsdpfxoy Uq S He Aa Iop

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Untuk dijual: Mesin universal dan pengasah perkakas presisi tinggi Strausak AG tipe 57U. Berkat desain serbaguna dengan meja silang, mesin ini sangat cocok untuk pembuatan perkakas, cetakan, dan jig. Mesin ini mampu melakukan pekerjaan penggerindaan yang menuntut pada benda kerja yang sangat dikeraskan (bahkan pada tingkat kekerasan 60–65 HRC) secara absolut andal. Kecepatan spindle dapat diatur secara fleksibel, dan lintasan maksimum sumbu X adalah 600 mm dengan jarak antara pusat 780 mm. Mesin dalam kondisi baik. Tipe Mesin: 57U Nomor Seri: 10686 Nomor Pesanan: 44137 Tegangan: 380 V Frekuensi: 50 Hz Hedsv E Ivfspfx Aa Isp Spesifikasi Teknis Maks. lintasan meja / sumbu X: 600 mm Jarak antara pusat (panjang benda kerja maks.): 780 mm Tinggi pusat: 125 mm – 175 mm (tergantung pada blok peninggi) Maks. diameter penggerindaan: sekitar 348 mm Dimensi meja: 1.030 mm x 214 mm Rentang putar meja: ± 9° Berat mesin (netto): sekitar 2.500 kg (berat transportasi sekitar 2.700–2.800 kg) Dimensi mesin (P x L x T): sekitar 2,30 m x 1,50 m x 1,50 m Ruangan direkomendasikan (instalasi): minimal 3,50 m x 2,50 m Putaran spindle: variabel tanpa langkah / tingkatan sabuk dari 2.250 hingga 6.000 rpm Feeder meja: pengaturan tanpa langkah dari 0 hingga 16 mm/menit Apakah Anda membutuhkan mesin pengerjaan logam berkualitas tinggi namun terjangkau untuk produksi Anda? Atau ingin menjual mesin Anda? Untuk informasi lebih lanjut atau kontak, kunjungi situs web kami.