Beli Kraussmaffei 50/55 Cx bekas (38.541)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Mesin Injeksi Hidrolik Krauss Maffei KM 50-55 CX Tahun produksi - 2022 Picker STAR Sistem penutupan sepenuhnya hidrolik. Sistem kontrol MC 6 berbasis komputer industri dengan teknologi Ethernet waktu nyata, dilengkapi dengan panel kontrol terintegrasi berukuran 21,5” dengan layar sentuh berwarna. Unit plastifikasi Unit plastifikasi lengkap untuk termoplastik dengan diameter screw 18 mm, dilengkapi katup pengunci mundur dan nozzle terbuka Radius nozzle 10 mm, lubang nozzle 4 mm SPESIFIKASI TEKNIS MESIN STANDAR Unit penutupan - Gaya penjepit mould: kN 500 - Gaya pembukaan mould: kN 40 - Ukuran pelat penjepit (h x v): mm 600 x 600 - Jarak antar kolom (h x v): mm 370 x 370 - Langkah pembukaan mould: mm 400 - Tinggi mould minimum: mm 200 - Lebar pembukaan: mm 600 - Langkah ejektor: mm 100 - Gaya ejektor maju/mundur: kN 23 / 10 Unit injeksi - Diameter screw: mm 18 - Rasio L/D: - 22,2 Hedjzhwl Repfx Aa Iep - Tekanan injeksi: bar 2500 - Volume injeksi: cm3 20 - Berat injeksi 1): g 19 - Kecepatan injeksi: mm/dtk 150 - Kapasitas injeksi standar: cm3/dtk 38 - Putaran screw standar: rpm 450 - Kapasitas plastifikasi 1): - pada putaran screw standar: g/dtk 4,0 Perlengkapan listrik-hidrolik - Daya nominal motor pompa: kW 11 - Daya pemanas terpasang: kW 3,8 - Jumlah zona pemanas silinder: - 4 - Waktu siklus kering / langkah sesuai Euromap 6 2): dtk/mm 1,2 / 259 - Kapasitas tangki oli: l 180 Dimensi dan berat - Berat bersih dengan lemari kontrol: t 2,55 - Dimensi mesin (p x l x t) 3): m 3,53 x 1,41 x 1,96

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of manufacture: 2008 Injection unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 cc Clamping unit: Clamping force: 35 t Tie bar spacing: 320x320 mm Platen size: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Hjdpfezc Nfyex Aa Iep Control system: MC V - touchscreen Additional equipment: Machine in very good technical condition EUROMAP 67 Robot interface Air valve x 2 Hot runner control x 6 Hardened injection unit - bimetallic The machine has been regularly serviced by authorized Krauss Maffei service in Germany The screw diameter can be changed to 20 mm or 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pump/Motor: 11 kW Heating capacity: 3.78 kW Total connected load: 14.78 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 32.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 500 kN, diameter sekrup: 25 mm, volume langkah: 59 cm³, Unit penutup: Gaya penutup: 500 kN Gaya pembukaan alat maksimum: 39 kN Gaya gerak pelat bergerak saat membuka: 21 kN Gaya gerak pelat bergerak saat menutup: 17 kN Pelat pemasangan (h x v): 600 x 600 mm Jarak bebas (h x v): 370 x 370 mm Jarak buka alat: 400 mm Tinggi pemasangan alat minimal: 200 mm Lebar bukaan: 600 mm Langkah ejektor: 100 mm Gaya ejektor maju/mundur: 22 kN Hodpszdrcisfx Aa Ijp Unit injeksi: Diameter sekrup: 25 mm Rasio L/D: 26 Tekanan injeksi: 2500 bar Volume tembakan: 59 ccm Berat tembakan (PS): 54 gr Laju alir injeksi: 59 ccm/detik Kecepatan putar sekrup: 365 rpm Debit plastifikasi: 8,5 g/s Gaya sistem nozzle: 50 kN Perlengkapan elektro-hidrolik: Daya nominal motor pompa: 11 kW Daya pemanas terpasang: 8 kW Zona pengatur pemanas silinder: 5 Isi oli: 180 ltr. Dimensi dan Bobot: Kebutuhan ruang sekitar: 3,50 x 1,40 x 2,00 m Berat total: 3000 kg Aksesori: - Elemen ayun - Baterai air 6 saluran - Krauss Maffei Picker SPX10 Perlengkapan tambahan: - 1x kontrol penarik core hidrolik pada BWAP - 1x katup udara - 6x unit kontrol hotrunner - Antarmuka robot sesuai Euromap 67 - Antarmuka untuk alat pewarna

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 98.495 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 500 kN, diameter sekrup: 25 mm, jarak antara tiang: 370 mm, volume langkah: 74 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 59 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 22.600 N, lintasan ejektor: 100 mm, langkah pembukaan: 600 mm, panjang total: 3.500 mm, lebar total: 1.400 mm, tinggi total: 1.910 mm, berat keseluruhan: 3.000 kg, kapasitas pemanasan: 8,12 kW (11,04 hp), daya pompa: 11.000 W, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, We offer this used KraussMaffei 50-180 CX injection moulding machine, year of manufacture 2006. KM designation: 50-180 CX International KM size code: 180 CX/50 Year of manufacture: 2006 Machine serial number: 61009011 Machine weight: 3,000 kg Condition: ready for operation (used) Pump operating hours: 98,495 Automatic cycle operating hours: 83,046 Hedpfxsyf E Dqo Aa Isp Description: Screw diameter: 25 mm Clamping force: 500 kN Shot volume: 74 cm³ Max. injection pressure: 2,500 bar Shot weight: 59 g Minimum mould height: 200 mm Max. opening stroke: 600 mm Max. daylight between platens: 600 mm Distance between tie bars: 370 mm Centring ring, injection side: Ø125 mm Centring ring, ejection side: Ø125 mm Ejector force fwd/rev: 22.6 kN / 9.9 kN Ejector stroke: 100 mm Machine dimensions (LxWxH): 3,500 x 1,400 x 1,910 mm Machine weight: 3,000 kg Heating capacity: 8.12 kW Pump power: 11 kW Type of input current: 400 V, 50 Hz standard industrial three-phase supply Equipment: documentation If you have any questions or need further information, please send us a message or call us.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 54.872 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, volume langkah: 570 cm³, tekanan injeksi: 2.387 batang, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, de001 Hodozgt Ilspfx Aa Iep

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Hedpjzc Nw Ajfx Aa Isp Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 ccm Clamping unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Controller with 16 hot runner zones Injection unit hardened – bimetallic Energy-efficient machine – features a system with 3 variable output hydraulic pumps Parallel movements Proportional valve on the injection unit – for precise injection Additional oil cleaning pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C Touch panel controller Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50x2.20x2.30 m All machines offered are put into operation by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, 1 Hedpfxozc Nwpj Aa Iop

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, This Krauss Maffei 500-4300 CX 3s injection moulding machine was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is suitable for high-quality injection moulding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Please contact us for further details. • Locking device • Mould weight: Moving side 3950 kg / Fixed side 5260 kg (total 7900 kg) • Min. mould diameter: 560 mm Hedpfeyg Hz Hjx Aa Isp • Opening stroke: 1170 mm • Mould installation height: min 480 mm; max - • Max. platen distance: 1650 mm • Mounting platens (H × V): 1270 × 1200 mm • Tie-bar clearances: H 900 mm / V 800 mm • Centring ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / Controls • Core pull controls: 2 (moving platen) + 2 (fixed platen) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. shot volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticising rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle orifice: 6 mm • Pump output / heating output: 90 kW / 44 kW • Other • Max. crane load: 10 tonnes • 2K capability: no • Filter nozzle/granulator: no • This is a standard fully hydraulic two-platen clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment: • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 62.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 70 mm, volume langkah: 1.077 cm³, Unit penutup: Gaya penutup: 2500 kN Gaya pembukaan cetakan, maks.: 169 kN Gaya gerak pelat bergerak (membuka): 86 kN Gaya gerak pelat bergerak (menutup): 68 kN Pelat pemasangan cetakan (h x v): 995 x 1050 mm Jarak bebas pelat (h x v): 630 x 630 mm Jarak buka cetakan: 820 mm Tinggi pemasangan cetakan min.: 330 mm Lebar bukaan: 1150 mm Stroke ejektor: 200 mm Gaya ejektor dorong/tarik: 58/28 kN Unit injeksi: Diameter sekrup: 70 mm Rasio L/D: 20 Tekanan injeksi: 1877 bar Volume langkah: 1077 ccm Berat shot (PS): 980 gr Debit injeksi: 385 ccm/s Kecepatan putar sekrup: 220 rpm Plastifikasi: 76 g/s Gaya dudukan nozzle: 82 kN Perlengkapan elektrohidrolik: Daya terpasang motor pompa: 55 kW Daya pemanas terpasang: 29 kW Zona pemanas silinder: 6 Hjdpfszfpthsx Aa Ijp Volume oli: 720 ltr. Dimensi dan berat: Kebutuhan ruang (PxLxT): sekitar 6,50 x 2,20 x 2,40 m Berat total: 14.500 kg Berat cetakan maks.: 3430 kg Aksesori: - Elemen peredam getaran - Baterai air 8-kanal - Robot Krauss Maffei LR 100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatik Perlengkapan tambahan: - 1x core puller hidrolik - 1x katup udara - Akumulator tekanan - 6x kontrol saluran hotrunner - Antarmuka robot sesuai Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 40.535 h, gaya penjepit: 5.000 kN, diameter sekrup: 100 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik tahun 2011. Krauss Maffei 500-4000 CX ini memiliki gaya penutupan 500 t dan diameter sekrup Ø 100 mm. Mesin ini menawarkan pembukaan cetakan maksimum 1530 mm dan jarak antar tie-bar 900 × 800 mm. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 500-4000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Kapasitas injeksi PP: 1,5 kg Hsdpfxsy Tk Thj Aa Iep • Dimensi minimal cetakan: 480 mm • Jarak tie-bar: 900 x 800 mm • Pembukaan cetakan maksimum: 1530 mm • Jam operasional: 40.535 jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 42.519 h, gaya penjepit: 5.000 kN, diameter sekrup: 100 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin injeksi hidrolik dari tahun 2011. Krauss Maffei 500-4300 CX ini memiliki gaya penutupan 500 t dan diameter sekrup Ø 100 mm. Bukaan maksimum cetakan adalah 1530 mm dengan jarak antar tie bar 900 × 800 mm. Jika Anda sedang mencari mesin injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 500-4300 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Hodpfx Aaey Tai Eo Isp • Kapasitas injeksi PP: 1,5 kg • Dimensi minimum cetakan: 480 mm • Jarak antar tie bar (H × V): 900 × 800 mm • Bukaan maksimum cetakan: 1530 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 46.424 h, gaya penjepit: 3.500 kN, diameter sekrup: 80 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik tahun 2012. Krauss Maffei 350-3000 CX ini memiliki gaya penutupan 350 t dan diameter ulir Ø 80 mm. Mesin ini menawarkan kapasitas injeksi PP sebesar 640 g dan bukaan maksimum cetakan 1260 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 350-3000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kapasitas injeksi PP: 640 g • Dimensi minimum cetakan: 380 mm • Jarak antar tie-bar: 710 × 710 mm • Maksimum bukaan cetakan: 1260 mm Hedpfjy S Tvvex Aa Ijp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Krauss Maffei KM 350-3000 CX Injection Moulding Machine Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on an industrial real-time Ethernet computer, equipped with an integrated 19-inch control panel with a colour touch screen, LED backlighting and visualisation of all running processes (ProcessDesigner). Plasticising unit Complete plasticising unit for thermoplastics in a wear-resistant configuration, featuring an 80 mm screw diameter, non-return valve, and open nozzle. TECHNICAL DATA – STANDARD VERSION Hsdpfx Aajy Tp Rlj Iop Clamping Unit Clamping force: 3,500 kN Opening force: 221 kN Platen dimensions (h x v): 1,060 x 1,095 mm Tie bar clearance (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95/49 kN Injection Unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1,855 bar Injection volume: 1,608 cm³ Shot weight: 1,464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticising rate: 109.5 g/s Electrical and hydraulic equipment Rated pump motor power: 75 kW Installed heater power: 36 kW Number of heater zones: 7 Dry cycle time / stroke per Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 l Dimensions and weight Net weight incl. control cabinet: 16.3 t Machine dimensions (L x W x H): 7.21 x 2.17 x 2.25 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory Hjdpjxqhuuofx Aa Iep - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force 1600 kN Max. tool opening force 87 kN Moving platen opening force 45 kN Moving platen closing force 38 kN Clamping platen (H x V) 820 x 845 mm Clear distance between tie bars (H x V) 520 x 520 mm Mold opening stroke 650 mm Min. mold installation height 300 mm Maximum opening stroke 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection Unit: Screw diameter 50 mm L/D ratio 20 Injection pressure 1892 bar Shot volume 393 ccm Shot weight (PS) 358 g Injection flow rate 177 ccm/s Screw speed 265 rpm Plasticizing rate 36.2 g/s Nozzle contact force 50 kN Electrohydraulic Equipment: Rated power of pump motor 22 kW Installed heating capacity 16 kW Number of heating zones (barrel) 5 Oil capacity 489 liters Dimensions and Weights: Floor space approx. 5.50 x 2.00 x 2.20 m Total weight 8200 kg Max. mold weight 1862 kg Accessories: - Vibration-damping elements - BluePower servo pump drive Additional Equipment: Hjdpfxey Nlb Ss Aa Iop - 1 x air valve - 8 x hot runner controllers - 2 x core pulls on moving platen - 2 x core pulls on fixed platen - Robot interface to Euromap 67

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 34.000 h, gaya penjepit: 800 kN, diameter sekrup: 45 mm, jarak antara tiang: 420 mm, volume langkah: 318 cm³, tekanan injeksi: 2.336 batang, lebar pelat: 670 mm, tinggi pelat: 670 mm, berat keseluruhan: 3.900 kg, Perlengkapan: dokumentasi / manual, 503569 Hedjyvz Izepfx Aa Iep

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. Hjdpfx Aex Thzpoa Isp MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: - screw diameter: 50 mm - check valve, open nozzle - nozzle radius: 10 mm - nozzle orifice: 4 mm Technical Specifications Clamping Unit - Clamping force: 1,600 kN - Mold opening force: 86.4 kN - Movable platen force: - opening: 44.8 kN - closing: 37.8 kN - Platen dimensions (H × V): 820 × 845 mm - Tie bar clearance (H × V): 520 × 520 mm - Mold opening stroke: 650 mm - Mold height: 300 mm - Platen opening stroke: 950 mm - Ejector stroke: 150 mm - Ejector force: 22.6 / 9.9 kN Injection Unit - Screw diameter: 50 mm - Injection pressure: 1,892 bar - Shot volume: 393 cm³ - Shot weight (PS): 357 g - Screw speed (std/opt): 390 / 490 rpm Electrical and Hydraulic Equipment - Rated pump motor power: 22 kW - Installed heating capacity: 10.97 kW - Number of barrel heating zones: 5 - Dry cycles (Euromap): 1,600 1/h - Oil tank capacity: 489 l Dimensions & Weight - Net weight with control cabinet: 6.0 t - Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control with colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mould opening stroke: 600 mm Mould height (installation): 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical-Hydraulic Equipment Hedpex Avhyofx Aa Iop Rated pump motor power: 22 kW Installed heater capacity: 15.62 kW Number of cylinder heating zones: 5 Number of dry cycles (EUROMAP): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Flange diameter: 160 mm, clamping force: 1,600 kN, tie bar spacing: 520 mm x 520 mm, min. mold diameter: 350 mm, min. mold installation height: 300 mm, opening stroke: 650 mm, daylight between platens: 950 mm, ejector stroke: 150 mm. Screw diameter: 45 mm, injection pressure: 2,336 bar, shot volume: 318 cm³, nozzle radius: 15 mm, injection volume: 134 cm³, injection weight: 289 g. Machine dimensions (L/W/H): approx. 4,900 mm x 1,600 mm x 2,200 mm, weight: approx. 7,400 kg, operating hours: approx. 71,187 h. The machine has an unknown defect. Documentation available. On-site inspection possible. Hsdsuabq Tjpfx Aa Ijp

Kondisi: bekas, Tahun pembuatan: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Hodow Hwthspfx Aa Iop

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 68.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd/rev: 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated power of pump motor: 22 kW Installed heating capacity: 16 kW Number of barrel heating zones: 5 Oil filling capacity: 489 liters Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration/isolation elements - Krauss Maffei Robot LR 100 (X: 550 mm, Y: 1200 mm, Z: 2500 mm, C: 0-90°) Additional equipment: Hodjydp D Eepfx Aa Isp - 1 x Air valve - 2 x Core pulls - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 58.670 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, volume langkah: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping plate dimensions (H x V): 820 x 845 mm Clear distance between tie-bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/back: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Heating zones (cylinder): 5 Hodpoydp Idsfx Aa Iep Oil fill volume: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Anti-vibration mounts - Krauss Maffei robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Dimensions of clamping plate: 995 x 1050 mm • Minimum mould installation height: 330 mm • Distance between platen plates: 1,150 mm • Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg) • Core pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Armoured unit: Yes (ZE 33.00) • Printer interface: Yes Hodpfeyhbq Esx Aa Ijp • Condition: Well-maintained and serviced Additional equipment • Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included) • Hot runner control: 12 zones • Cooling: 4 x HB 100