Beli Kraussmaffei Km 80 C1 bekas (26.611)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Merenberg
11.193 km
Mesin cetak injeksi
KraussMaffeiKM 80 C1
Hubungi
Kondisi: siap digunakan (bekas), Mesin bekas
Mesin injeksi plastik
Produsen: Krauss Maffei
Tipe: KM 80 C1
Tahun pembuatan: 2000
Hanya tersisa 1 unit di stok
Tanpa waktu pengiriman, siap kirim segera
Kunjungan dapat dilakukan dengan janji terlebih dahulu
Mesin tidak lagi terhubung ke listrik / Tanpa sambungan air pendingin
Mesin disimpan secara profesional
Data teknis:
Gaya penutup: 800 kN
Pelat pemasangan (mm): 610×610
Jarak antar tie-bar (mm):
Tinggi pemasangan cetakan (mm): 250
Jarak pelat (mm): 750
Kontrol: MC4
Gedsu Ti Sropfx Aiyjub
Bahasa tampilan layar: Jerman (tidak dapat diubah)
Diameter sekrup unit injeksi (mm): 45
Tekanan injeksi (bar): 1878
Volume langkah (cm³): 275
Daya penggerak pompa (kW): 18,5
Daya pemanas (kW): 13
Isi oli (l): 270
Dimensi (m): 4,3 x 1,4 x 2,1
Bobot total: 3,2 ton
Foto tambahan atas permintaan.
Iklan kecil
Nürnberg
11.010 km
Mesin cetak injeksi
KraussMaffeiKM 50-90 C1/50
Hubungi
Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 44731, gaya penjepit: 500 kN, diameter sekrup: 25 mm, jarak antara tiang: 320 mm, berat injeksi: 47 g, tinggi cetakan (min.): 200 mm, langkah pembukaan: 550 mm, panjang total: 4.000 mm, lebar total: 1.163 mm, tinggi total: 1.787 mm, berat keseluruhan: 2.300 kg, frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 58 A, Please refer to the pictures and video for the condition and contents of the offer.
The system is currently dismantled.
The device/system offered here has been tested and is fully functional and ready for operation.
The purchase price includes VAT.
You will receive a proper invoice.
For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied.
Subject to prior sale.
Please visit our website to view our other offers as well.
Gsdpfxex Srggj Aiyoub
All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only.
Deviations from technical specifications as well as errors in the item description may occur and are reserved.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 380 CX G01
Hubungi
Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 1.609 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61008195, gaya penjepit: 800 kN, diameter sekrup: 40 mm, jarak antara tiang: 420 mm, volume langkah: 201 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 183 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 750 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g, Injection moulding machines direct from the manufacturer!
As a manufacturer, KraussMaffei offers you our inspected and flexible stock machines:
The fully hydraulic CX series features an especially compact, efficient, and flexible two-platen machine. The highly compact two-platen design with cantilevered clamping unit provides generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further offers a powerful basis to meet the highest demands, ensuring the right solution for any application.
TECHNICAL DATA:
KM 80 / 380 CX G01 (Order 38648713)
CONTROL SYSTEM
- MC 6 with TFT color display with multitouch functionality
CLAMPING UNIT
- Clamping force: kN 800
- Maximum mold opening force: kN 55
- Clear space between tie bars (H x V): mm 470 x 420
- Mounting platen size (H x V): mm 670 x 670
- Minimum/maximum mold height: mm
- Maximum opening stroke: mm 750
- Maximum mold opening travel: mm 500
- Ejector drive: hydraulic
- Ejector stroke: mm 150
- Ejector force fwd/back: kN 23 / 10
- Ejector speed fwd/back: mm/s 760 / 800
- Max. mold weight: kg 1000
INJECTION UNIT
- Screw diameter/type: mm 40 / Standard (customization possible)
- Effective L/D ratio: 20
- Injection pressure: bar 1,860
- Shot volume: cm³ 201
- Shot weight at max. stroke for PS: g 183
- Injection speed: mm/s 100
- Injection flow rate: cm³/s 126
- Screw drive/rotation speed: 1/min 295
- Plasticizing rate (standard): g/s 12.3
- Nozzle contact force: kN 50
ELECTRICAL PARAMETERS
- Connected load: kW 15.0
- Installed heating capacity: kW 10.9
- Power supply: V/Hz 400 / 50, 3 phases with neutral
WEIGHT & DIMENSIONS
- Net weight with control cabinet: t 3.55
- L x W x H: m 3.96 x 1.48 x 2.02
ADDITIONAL EQUIPMENT
- Wear-resistant plasticizing unit
- BluePower full insulation for plasticizing cylinder
- Open nozzle
- 1 additional temperature control circuit for nozzle heating
- 1-way air valve (BWAP)
- Pneumatic hot runner shutdown control, 1-way
- Hydraulic core pull, 1-way (BWAP)
- Euromap interface for handling: E18, E63
Godpfxjy Rlmwo Aiyeub
- Euromap interface (central computer): E67, E77
- Adaptive Process Control (APC)
- Injection-compression function
- Graphic analysis package
The machine is located at our facility in Parsdorf and is available at short notice. Additional options are available upon request.
We look forward to your inquiry.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
KraussMaffeiKM 80-180 CX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 Sprue Picker
Year of manufacture: 2005
Injection Unit:
Screw diameter: 30 mm
Injection weight: 77.4 g
Injection pressure: 2025 bar
Metering volume: 85 ccm
Clamping Unit:
Clamping force: 80 t
Tie bar spacing: 420x420 mm
Platen size: 670x670 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: MC V - touchscreen
Additional Equipment:
Euromap 67
Robot interface
Control with air valve
One hydraulic core pull
Hardened, bimetallic injection unit
Sepro Industrial Robot 55 sprue picker
Year of manufacture: 2018
It is possible to purchase a Moretto raw material feeding system at an additional cost.
The set includes:
- Volumetric screw dosing unit with hopper
- Conveyor with proportional valve
Gedpfx Aey Dp Ifoiyjub
Dimensions:
Weight: 3900 kg
Length/Width/Height: 3.80x1.50x2.10 m
Drive:
Pump/Motor: 15 kW
Heating capacity: 8.12 kW
Total connected load: 23.12 kW
All machines offered are started up and tested by our service technicians prior to sale.
A video of the technical test of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź.
Price: On request
Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 300 - 1900 C1
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 57.830 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, 01
Gusdpfx Aisy Nk Taoyeb
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 380 PA G01
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036679, gaya penjepit: 1.600 kN, diameter sekrup: 40 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines:
The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, allowing you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine is suitable for diverse applications, such as packaging, electrical and electronics industries, medical technology, and automotive sector.
Your advantages:
– Optimised price-performance ratio for a wide range of applications
– High energy efficiency due to the all-electric machine concept
– Ability to meet demanding delivery deadlines thanks to a base machine concept with a broad spectrum of options
TECHNICAL DATA:
KM 160 / 750 PA G01 (Order 38670011)
(Machine No.: 61036683, new, YOM 2013)
CONTROL SYSTEM
■ MC P1 with 15” TFT colour display, multitouch functionality
CLAMPING UNIT
■ Clamping force: kN 1600
■ Max. mould opening force: kN 120
■ Clear space (H x V): mm 570 x 520
■ Mounting platen size (H x V): mm 770 x 720
■ Mould installation height min. - max.: mm 200 - 500
■ Max. opening width: mm 950
■ Max. mould opening stroke: mm 450
■ Ejector drive: electric
■ Ejector stroke: mm 100
■ Ejector force fwd/back: kN 33 / 33
■ Ejector speed fwd/back: mm/s 300 / 300
■ Max. mould weight: kg 1200
INJECTION UNIT
■ Screw diameter / type: mm 50 / standard
■ Effective L/D ratio: 20.2
■ Injection pressure: bar 1892
■ Shot volume: cm³ 393
■ Shot weight at max. stroke for PS: g 358
■ Injection speed: mm/s 200
■ Injection flow rate: cm³/s 393
■ Screw drive/speed: rpm 267
■ Plasticising capacity (standard screw): g/s 36.5
■ Nozzle contact force: kN 42
ELECTRICAL SPECIFICATIONS
■ Connected load: kW 31.2
■ Installed heating capacity: kW 15.5
■ Power supply: V / Hz 400 / 50, 3 phases with neutral
DIMENSIONS & WEIGHT
■ Net weight incl. electrical cabinet: t 9.7
■ Length x width x height: m 5.65 x 1.82 x 1.95
Guedpfx Aisyzz Ireyeb
ADDITIONAL EQUIPMENT
■ Wear-resistant plasticising unit
■ BluePower full insulation of plasticising cylinder
■ Open nozzle
■ Air valve 1-fold (BWAP)
■ Pneumatic hot runner shut-off control 1-fold
■ Electrical interface for pneumatic cascade 4-fold
■ Euromap handling interfaces E18 + E67
■ Euromap interface (central computer) E67, E77
■ Water manifold 4-fold
■ Electrical pre-wiring for hydraulic auxiliary unit
■ Automatic central lubrication
■ Adaptive Process Control (APC)
■ Injection compression moulding circuitry
■ Graphic analysis package
■ Swivelling device for injection unit
The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request.
We look forward to your enquiry.
Iklan kecil
Albacete
12.277 km
Mesin cetak injeksi
KraussMaffeiKM 150-1000 C1
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.470 kN, diameter sekrup: 50 mm, tekanan injeksi: 2.000 batang, langkah pembukaan: 500 mm, berat keseluruhan: 7.000 kg, Ditawarkan mesin injeksi Krauss Maffei KM 150-1000 C1, tahun 1997, dilengkapi dengan robot cartesiano WITTMANN W711 untuk pengambilan produk secara otomatis.
Data utama:
Gaya penutup: 150 ton (≈1470 kN)
Model: KM 150-1000 C1
Tahun pembuatan: 1997
Termasuk robot WITTMANN W711 terintegrasi
Guedpfoyn Ilvex Aiyeb
Mesin ini dikonfigurasikan untuk produksi industri dan dilengkapi dengan sistem penanganan otomatis melalui robot WITTMANN W711, ideal untuk proses dengan pengambilan otomatis dan pengurangan waktu siklus.
Cocok untuk produksi komponen teknis berukuran sedang dari PP, PE, ABS atau termoplastik umum lainnya.
Tersedia untuk inspeksi di Albacete (Spanyol).
Informasi teknis tambahan dan video operasi dapat diberikan atas permintaan.
Iklan kecil
Langenfeld (Rheinland)
11.262 km
Mesin cetak injeksi
KraussMaffeiKM 80-750 CX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 34.000 h, gaya penjepit: 800 kN, diameter sekrup: 45 mm, jarak antara tiang: 420 mm, volume langkah: 318 cm³, tekanan injeksi: 2.336 batang, lebar pelat: 670 mm, tinggi pelat: 670 mm, berat keseluruhan: 3.900 kg, Perlengkapan: dokumentasi / manual, 503569
Gujdpfx Aijyvz Izoyjb
Iklan kecil
Langenfeld (Rheinland)
11.262 km
Mesin cetak injeksi
KraussMaffeiKM 80-380 EX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 49.673 h, Fungsionalitas: fungsi terbatas, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 154 cm³, en-001
Godpfxeytd I Rj Aiyeub
Iklan kecil
Belanda
11.348 km
Mesin Cetak Injeksi Hidraulik
KraussMaffei80-220 C1
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Data Umum
Gsdpfx Ajx D Ea Ieiysub
Tinggi pengukuran: 405 mm
Dimensi
Panjang mesin: 405 mm
Unit Penjepit
Gaya penjepit: 800 kN
Krauss Maffei 80-220 C1 ini diproduksi pada tahun 2001. Mesin ini memiliki gaya penjepit 800 kN dan gaya pembuka cetakan 55 kN. Mesin termasuk robot, namun terdapat kerusakan pada sistem vakum. Cocok bagi Anda yang ingin meningkatkan kemampuan produksi moulding injeksi. Hubungi kami untuk informasi lebih lanjut tentang mesin ini.
Tipe Aplikasi
Injection Moulding
Iklan kecil
Jerman
11.023 km
Mesin cetak injeksi
KraussMaffeiKM 250-1400 C1
Hubungi
Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available.
Gedpfx Aiouiykdjyoub
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 420 - 2700 C1
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1
• Year of manufacture: 1999
Technical Data
Clamping Unit
• Clamping force: 4200 kN
• Max. mould opening force: 250 kN
• Movable platen force (opening): 124 kN
• Movable platen force (closing): 102 kN
• Mould platen dimensions (W x H): 1270 mm x 1200 mm
• Tie bar spacing (W x H): 800 mm x 800 mm
• Mould opening stroke: 1020 mm
• Minimum mould height: 380 mm
Gsdpfxewqd Aqe Aiyeub
• Max. daylight: 1400 mm
• Ejector force (forward/backward): 95 / 48 kN
Injection Unit
• Screw diameter: 80 mm
• L/D ratio: 20
• Injection pressure: 1829 bar
• Shot volume: 1433 cm³
• Shot weight (PS): 1304 g
• Injection rate: 513 cm³/s
• Max. plasticising capacity: 108 g/s
• Nozzle contact force: 173 kN
Electrical and Hydraulic System
• Pump motor power: 75 kW
• Installed heating power: 36 kW
• Number of barrel heating zones: 7
• Oil tank capacity: 1075 l
Dimensions and Weight
• Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m
• Total machine weight: 20,500 kg
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 250-1900 C1
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Injection Moulding Machine Krauss Maffei KM 250-1900 C1
Year of manufacture: 2007
✅ General Information
Manufacturer: Krauss Maffei
Model: KM 250-1900 C1
Year of manufacture: 2007
Clamping system: fully hydraulic
Control system: MC4 with colour monitor, control panel, and floppy disk drive
🔹 Clamping Unit
Clamping force: 2500 kN
Opening force: 160 kN
Platen movement force: opening 86 kN, closing 68 kN
Platen dimensions: 995 x 1050 mm
Tie bar spacing: 630 x 630 mm
Mould opening stroke: 820 mm
Mould installation height: 330 mm
Max opening width: 1150 mm
Ejector stroke: 200 mm
Ejector force: 58/28 kN
🔹 Injection Unit
Screw diameter: 70 mm
Injection pressure: 1778 bar
Shot volume: 1047 cm³
Shot weight (PS): 953 g
Screw speed: 218/306 rpm
Injection rate: 400 cm³/s
Output (PS): 75 g/s (standard), 105 g/s (high speed)
Gujdpfexak Ucsx Aiyjb
🔹 Electro-hydraulic Equipment
Pump motor power: 55 kW
Cylinder heaters: 30 kW (6 zones)
Dry cycles according to Euromap: 1400 1/h
Oil tank: 720 l
🔹 Dimensions and Weight
Net weight (including control cabinet): 14.2 t
Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 80-380 CX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Mesin injeksi Krauss Maffei KM 80-380 CX
Tahun produksi: 2010
Unit penutup
Godjxw Upfjpfx Aiyjub
Gaya penekanan: 800 kN
Dimensi pelat penahan (H × V): 670 × 670 mm
Jarak antar kolom (H × V): 420 × 420 mm
Tinggi cetakan (min./maks.): 250 mm
Bukaan maksimum: 750 mm
Unit injeksi
Diameter sekrup: 40 mm
Volume injeksi: 201 cm³
Berat injeksi (PS): 183 g
Tekanan injeksi: 1860 bar
Peralatan elektro-hidrolik
Daya motor pompa: 15 kW
Daya pemanas: 10,9 kW
Dimensi dan berat
Dimensi mesin (p × l × t): 4,09 × 1,48 × 2,02 m
Berat (dengan panel kontrol): 3,55 t
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 300-1900 C1
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, KRAUSS MAFFEI KM 300-1900 C1 INJECTION MOULDING MACHINE
Year of manufacture: 2007
Includes: Wittmann W 731 robot
General Description
We offer a used injection moulding machine from the renowned Krauss Maffei brand, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system, as well as a modern MC4 control system with a color monitor, integrated operator panel, and floppy disk drive.
Plasticising Unit
Complete plasticising unit for thermoplastics, wear-resistant version, equipped with a 60 mm diameter screw, check valve, and open nozzle.
Technical Specifications
Clamping Unit
Clamping force: 3000 kN
Mould opening force: 160 kN
Movable platen force:
– Opening: 86 kN
– Closing: 68 kN
Platen dimensions (H x W): 995 x 1050 mm
Guodpfxsw Du Hte Aiyjb
Tie bar spacing: 630 x 630 mm
Mould opening stroke: 820 mm
Minimum mould height: 330 mm
Maximum daylight: 1150 mm
Ejector stroke: 200 mm
Ejector force: 58 / 28 kN
Injection Unit
Screw diameter: 60 mm
Injection pressure: 2420 bar
Shot volume: 769 cm³
Shot weight (PS): 700 g
Screw speed (standard/option): 218 / 306 rpm
Injection rate: 294 cm³/s
Plasticising rate:
– Standard speed: 55 g/s
– Increased speed: 78 g/s
Electro-hydraulic System
Pump motor power: 55 kW
Heater power: 30 kW
Number of cylinder heating zones: 6
Dry cycles (Euromap): 1350 cycles/h
Oil tank capacity: 720 l
Dimensions & Weight
Net weight with control cabinet: 14.2 t
Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 250 – 1900 C1
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine
Year of manufacture: 2007
Control system: MC4
Operating hours: only 8,900!
Clamping unit:
Clamping force: 2,500 kN
Max. mould opening force: 160 kN
Movable platen traverse force – opening: 86 kN
Movable platen traverse force – closing: 68 kN
Mould platen dimensions (H × L): 995 × 1,050 mm
Tie bar spacing (H × W): 630 × 630 mm
Mould opening stroke: 820 mm
Minimum mould height: 330 mm
Maximum daylight between platens: 1,150 mm
Ejector stroke (hydraulic): 200 mm
Ejector force (forward/back): 58 / 28 kN
Injection unit:
Screw diameter: 70 mm
L/D ratio: 20
Injection pressure: 1,778 bar
Stroke volume: 1,047 cm³
Shot weight (PS): 953 g
Injection rate: 400 cm³/s
Screw speed (standard/option): 218 / 306 rpm
Max. plasticising rate: 75 g/s
Nozzle contact force: 110 kN
Electro-hydraulic equipment:
Pump motor power: 55 kW
Installed heating power: 30 kW
Number of barrel heating zones: 6
Oil tank capacity: 720 l
Dimensions and weight:
Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m
Total weight: 14,500 kg
Maximum mould weight: 3,430 kg
Accessories and additional equipment:
Oil tank
Anti-vibration pads
3 × core pullers
8 × hot runner control zones
2 × air valves
Robot interface compliant with Euromap 67
Additional information:
Machine located in Poland
Guedpfow A N Hfjx Aiyjb
Ready for collection
Possibility to arrange loading, transport, installation, and commissioning
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 380 PA G01
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines:
The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry.
Godpoud H Dmjfx Aiysub
Your benefits:
– Optimised price-performance ratio for a broad range of applications
– High energy efficiency thanks to an all-electric machine concept
– Fast delivery times through a base machine concept with a wide range of options
TECHNICAL DATA:
KM 80 / 380 PA G01 (Order 38670023)
CONTROL UNIT
- MC P1 with 15” TFT colour display with multi-touch functions
CLAMPING UNIT
- Clamping force: kN 800
- Max. mould opening force: kN 120
- Tie bar spacing (h x v): mm 470 x 420
- Platen size (h x v): mm 610 x 560
- Min. – max. mould height: mm 150 – 400
- Opening stroke: mm 750
- Max. mould opening stroke: mm 350
- Ejector drive: electric
- Ejector stroke: mm 100
- Ejector force forward/backward: kN 22 / 22
- Ejector speed forward/backward: mm/s 300 / 300
- Max. mould weight: kg 600
INJECTION UNIT
- Screw diameter/type: mm 40 / Standard
- Effective L/D ratio: 20.0
- Injection pressure: bar 1860
- Shot volume: cm³ 201
- Shot weight at max. stroke for PS: g 183
- Injection speed: mm/s 200
- Injection flow rate: cm³/s 251
- Screw drive/speed: rpm 334
- Plasticising rate (standard): g/s 24.7
- Nozzle contact force: kN 34
ELECTRICAL PARAMETERS
- Connected load: kW 20.6
- Installed heating capacity: kW 11.5
- Power supply: V / Hz 400 / 50 3-phase with neutral conductor
WEIGHT AND DIMENSIONS
- Net weight with control cabinet: t 5.6
- Length x width x height: m 4.75 x 1.67 x 1.85
ADDITIONAL EQUIPMENT
- Low-wear plasticising unit
- BluePower full insulation of plasticising cylinder
- Open nozzle
- Air valve 1-fold (BWAP)
- Pneumatic control for hot runner shut-off 1-fold
- Electrical cascade interface 4-fold
- Euromap interface for handling E18, E63
- Euromap interface (central computer) E67, E77
- Water battery 4-fold
- Automatic central lubrication
- Adaptive Process Control (APC)
- Injection-compression control
- Graphic analysis package
The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request.
We look forward to your enquiry.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 380 CX G06
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines:
The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits:
– Optimised cost-performance ratio for a broad spectrum of applications
– High energy efficiency through an all-electric machine concept
– Fast lead times thanks to the base machine concept with a wide range of options
TECHNICAL DATA:
KM 80 / 250 PA G01 (Order 38670013)
(Machine no.: 61036936, new, YOM 2023)
CONTROL SYSTEM
MC P1 with 15” TFT colour display featuring multi-touch functionality
CLAMPING UNIT
Clamping force kN 800
Max. mould opening force kN 120
Daylight (h x v) mm 470 x 420
Platen size (h x v) mm 610 x 560
Mould installation height min.-max. mm 150 - 400
Max. opening stroke mm 750
Max. mould opening stroke mm 350
Ejector drive electric
Ejector stroke mm 100
Ejector force fwd/rev kN 22 / 22
Ejector speed fwd/rev mm/s 300 / 300
Max. mould weight kg 600
INJECTION UNIT
Screw diameter / type mm 35 / standard
Effective L/D ratio 20.0
Injection pressure bar 1837
Shot volume cm³ 135
Shot weight at max. stroke for PS g 123
Injection speed mm/s 200
Injection flow cm³/s 192
Screw drive / speed rpm 382
Plasticizing rate (standard screw) g/s 19.5
Nozzle contact force kN 30
ELECTRICAL PARAMETERS
Connected load kW 17.8
Installed heating power kW 8.9
Power supply V / Hz 400 / 50 3 phases with neutral
WEIGHT AND DIMENSIONS
Net weight with control cabinet t 5.9
Length x width x height m 4.75 x 1.67 x 1.82
ADDITIONAL EQUIPMENT
Wear-resistant plasticizing system
BluePower full insulation for plasticizing cylinder
Open nozzle
1-fold air valve (BWAP)
1-fold pneumatic control for hot runner shut-off
4-fold electric interface for cascade control
Electrical pre-installation for hydraulic auxiliary unit
Euromap interface for handling E18, E63
Euromap interface (host computer) E67, E77
4-fold water manifold
Automatic central lubrication
Adaptive Process Control (APC)
Injection compression moulding switch
Graphic analysis package
Swing-out injection unit
Gusdpfsuggb Djx Aiyjb
The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request.
We look forward to your enquiry.
Lelang
Lelang telah berakhir
Bayern
10.982 km
Mesin cetak injeksi
KraussMaffeiKM 500/3500 C1
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 504212, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, jarak antara tiang: 900 mm, tekanan injeksi: 1.742 batang, tinggi pemasangan: 480 mm, No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Clamping Unit
Clamping force: 5,000 kN
Distance between tie bars (h x v): 900 x 800 mm
Maximum mold opening distance: 1,170 mm
Minimum mold installation height: 480 mm
Platen opening stroke: 1,650 mm
Ejector stroke: 250 mm
Ejector force: 95 kN
Ejector force (retraction): 48 kN
Injection Unit
Screw diameter: 90 mm
L/D ratio: 20
Injection pressure: 1,742 bar
Injection volume: 1,953 cm³
Shot weight for PS: 1,777 g
Injection rate: 649 cm³/s
Nozzle contact force: 115 kN
MACHINE DETAILS
Electrical Data
Pump drive power: 90 kW
Heating capacity: 44 kW
Operating voltage: 400 V
Frequency: 50 Hz
Total nominal current (Iₙ): 306 A
Motor nominal current (Iₙ): 170 A
Operating voltage: 3-phase
Gujdpfew Dy Rwox Aiyjb
Dimensions & Weight
Net weight: 25.8 t
Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m
Note: Delivery as well as assembly and commissioning can be arranged at extra cost upon request.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 120 / 380 PA G01
Hubungi
Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 22 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61035145, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, volume langkah: 393 cm³, tekanan injeksi: 2.429 batang, berat injeksi: 140 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 120 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 450 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 6.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we are offering our inspected and versatile stock machines:
The base injection moulding machine, precisionMolding, provides the perfect entry solution for all-electric injection moulding, enabling quick and innovative responses to market demands. It combines high performance, simple operation, and short delivery times. The machine is suitable for a wide variety of applications, including packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits:
– Optimised price-performance ratio for a broad spectrum of applications
– High energy efficiency thanks to the all-electric machine concept
– Fast and reliable delivery due to the base machine concept featuring a broad range of options
TECHNICAL DATA:
KM 160 / 750 PA G01 (Order 38670011)
(Machine No.: 61036683, new, Year 2013)
CONTROL
- MC P1 with 15'' TFT colour display featuring multi-touch functionality
CLAMPING UNIT
- Clamping force: kN 1200
- Maximum mould opening force: kN 180
- Clear space (h x v): mm 520 x 470
- Mounting platen dimensions (h x v): mm 690 x 640
- Minimum–maximum mould height: mm 180–450
- Maximum opening stroke: mm 850
- Maximum mould opening travel: mm 450
- Ejector drive: electric
- Ejector stroke: mm 120
- Ejector force fwd/rev: kN 27 / 33
- Ejector speed fwd/rev: mm/s 300 / 300
- Maximum mould weight: kg 850
INJECTION UNIT
- Screw diameter / type: mm 35 / standard
- Effective L/D ratio: 22.9
- Injection pressure: bar 2429
- Shot volume: cm³ 154
- Shot weight at max. stroke for PS: g 140
- Injection speed: mm/s 200
- Injection rate: cm³/s 192
- Screw speed: rpm 374
- Plasticising rate (standard screw): g/s 18.9
- Nozzle contact force: kN 34
ELECTRICAL PARAMETERS
- Connected load: kW 22.7
- Installed heating capacity: kW 11.5
- Power supply: V / Hz 200 / 50 3-phase with neutral
WEIGHT AND DIMENSIONS
- Net weight including control cabinet: t 6.7
- Length x width x height: m 5.18 x 1.76 x 1.90
ADDITIONAL EQUIPMENT
- Wear-resistant plasticising unit
- BluePower full insulation for plasticising cylinder
- Open nozzle
- Air valve: single (BWAP)
- Pneumatic control for hot runner shut-off: single
- Electrical interface for pneumatic cascade: 4-fold
- Euromap interfaces for automation: E18 + E67
- Euromap interface (central computer): E67, E77
- Water manifold: 4-fold
- Electrical prewiring for external hydraulic unit
- Automatic central lubrication
- Adaptive Process Control (APC)
- Injection compression moulding function
- Graphic analysis package
- Swivelling device for injection unit
The machine is located at our facility in Parsdorf and is available at short notice. Further optional extras are available on request.
Gsdpfxey Rmwdj Aiyeub
We look forward to your enquiry.
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 300 - 1400 C1
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 66.160 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, volume langkah: 679 cm³, Clamping force 3000 kN
Maximum tool opening force 160 kN
Moving platen opening force 86 kN
Moving platen closing force 68 kN
Mounting platen (H x V) 995 x 1050 mm
Clear width (H x V) 630 x 630 mm
Mold opening stroke 820 mm
Minimum mold installation height 330 mm
Opening width: 1150 mm
Ejector stroke 200 mm
Ejector force forward/backward 58 kN
Injection unit:
Screw diameter 60 mm
Gujdpfxsy Nk Uqs Aiyeb
L/D ratio 21
Injection pressure 2000 bar
Shot volume 679 ccm
Shot weight (PS) 618 g
Injection flow rate 325 ccm/s
Screw speed 259 rpm
Plasticizing rate 58 g/s
Nozzle contact force 110 kN
Electrohydraulic equipment:
Nominal power of pump motor 45 kW
Installed heating power 23 kW
Temperature control zones for barrel heating 6
Oil capacity 720 liters
Dimensions and weights:
Space requirement approx. 6.20 x 2.20 x 2.40 m
Total weight 12500 kg
Maximum mold weight 3430 kg
Accessories:
- Oscillation elements
- 10-fold water manifold
Additional equipment:
- 1 x air valve
- 3 x core pulls
- 3 x hot runner controllers
- Robot interface compliant with Euromap 67
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
KraussMaffeiKM 120-380 EX aus Reinraumfertigung
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 61.300 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, jarak antara tiang: 470 mm, tekanan: 2.429 batang, Here, as a specialized dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale.
Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards.
We have been wholesalers of injection moulding machines for over 25 years.
++++From pharmaceutical cleanroom production++++
Manufacturer: KraussMaffei
Machine type: KM 120-380 EX
International designation: 380 EX / 120
Machine number: 61011287
Year of manufacture: 2008
Machine hours: 61,300 h
Control system: MC5
Technical Data - Clamping Unit
Clamping force: 1,200 kN
Tie bar distance h x v: 470 x 470 mm
Platen size h x v: 780 x 735 mm
Min. mould height: 200 mm
Max. mould height: 450 mm
Max. daylight: 850 mm
Opening stroke: 400 mm
Gujdpfx Aey D Adtjiysb
Ejector stroke: 150 mm
Ejector force: 22 kN
Moveable platen centering diameter: 160 mm
Fixed platen centering diameter: 125 mm
Mould weight: 1,485 kg
Technical Data - Injection Unit
Screw diameter: 35 mm
Shot volume: 156 cc
Injection pressure: 2,429 bar
Screw L/D ratio: 23 l/d
Screw speed: 289 rpm
Plasticizing rate: 27 g/s (PS)
Free-shot rate: 477 g/s (PS)
Number of heating zones: 5
Dimensions & Weight
Machine dimensions LxWxH: 6m x 1.7m x 2.19m
Total weight: 9,700 kg
Equipment
Screen texts: German
Screen texts: English
+++Extras++++
Automation: Handling device / extraction robot included - Handling: LR 100-2300
Conveying technology: Roller conveyor included
CE marking: available
Full maintenance and acceptance history
Complete last test report
Incl. conveyor belt Incl. safety cage
Machine equipped with water battery
Machine without material hopper
Leveling elements
Interface: EUROMAP 12
Electrical
Schuko socket 10A
CEE socket 16A
Voltage: 400 V
Frequency: 50 Hz
Motor current: 80 A
Warranty
Warranty valid until first commissioning
Loading/Shipping
Free loaded onto buyer's truck or free delivery against freight reimbursement
Available ex stock Hanover / Germany
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
KraussMaffeiKM 130-750-180 CXV BluePower 2-Farben 2K
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale.
Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards.
We have been wholesalers of used injection moulding machines for over 25 years.
Current update – Tax notice and benefit for used machinery:
As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment.
Keyword: Growth booster (Section 7 (2) EStG-E)
Manufacturer: Krauss Maffei
Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine
Control: MC6
Year: 2014
Machine No.: 61020507
Operating hours: 47,137 h
Complete service record for the past 7 years / 25,000 h of operation
1st injection unit 750 horizontal
Injection unit/screw: 50 mm
Shot volume: 393 cm³
Shot weight: 357 g
Heating power: kW
Heating zones: 5
Nozzle stroke: mm
Injection pressure: 1892 bar
2nd injection unit 180 vertical
Injection unit/screw: 30 mm
Shot volume: 85 cm³
Shot weight: 77 g
Injection pressure: 2500 bar
Clamping unit
Clamping force: 130 t / 1300 kN
Opening stroke: 600 mm
Tie bar spacing: 470 x 470 mm
Platen size: 745 x 770 mm
Max. platen spacing: 900 mm
Min. mould installation height: 300 mm
Ejector stroke: 150 mm / ejector force: 23 kN
Dimensions: 4.39 x 1.61 x 4.01 m
Weight: 9,000 kg
Extras – Full machine data sheet attached as PDF
Nozzle side: needle shut-off A+C
1 x hydraulic core pull
1 x pneumatic core pull
1 x air blow-off
Ejector side: 1 x hydraulic core pull
Guodpfoyf Uy Uex Aiysb
3 x pneumatic core pulls
1 x air blow-off
Water circuit BGS: 6 zones each on nozzle and ejector side
BluePower technology – up to 40% energy savings
The machine is in excellent condition and can be inspected under power.
Any peripherals shown are NOT included in the offer!
The machine is available immediately.
Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs.
Information about the company and our machines:
- We only sell machines purchased from running production, stored at our warehouse in Hanover
- All machines offered are inspected and tested before dismantling
- We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property.
- All offered machines come from successful companies where maintenance and care are standard practice
- All available machines can be viewed in our warehouse.
Iklan kecil
Cantabria
12.280 km
Krauss-Maffei KM 160/380 CX
KraussMaffeiKM 160/380 CX
Hubungi
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Mesin cetak injeksi Krauss-Maffei 160 ton, tahun pembuatan 2006, dengan konveyor. Diameter ulir 35 mm, 2 penarik inti, 6 zona hot runner. Mesin ini diserahkan setelah direkondisi oleh kami dan dapat didemonstrasikan dalam kondisi terhubung listrik di tempat kami!
Godpfeh Dh Dusx Aiyjub
Kami memudahkan pencarian untuk Anda: "kraussmaffei km 80 c1"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan




























































































































































































































