Beli Lefa Zpm 60 Liter bekas (25.512)

Kondisi: baik (bekas), Tahun pembuatan: 1996, de-01 Rjdpepix Ncofx Alast

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" Redpfx Alowc Afhjast - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary.

Kondisi: bekas, de-01 Rjdpfxoy Hp Abs Alajt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: SN49983, Fungsionalitas: berfungsi sepenuhnya, en-1 Redpfx Asx U Ekdslajt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, nomor mesin/kendaraan: SN48357, Fungsionalitas: berfungsi sepenuhnya, kammerofen-001 Redpfxetbq Eqo Alajt

Kondisi: baru, HARGA: 1.800 EUR Mesin ini memiliki keunggulan operasi yang sederhana, mudah dibersihkan dan dirawat, serta stabilitas selama pengoperasian. Cocok untuk pabrik pengolahan daging, restoran, dapur, dan fasilitas katering lainnya. Dimensi: 850×450×850 mm Daya listrik: 0,12 kW Volume: 60 liter Waktu pengiriman: segera setelah pembayaran uang muka (100%) Rsdoikvrdopfx Alaot

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, New machine 24 months warranty Advantages: Rsdpfohydmdjx Alajt + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant torque transmission + Equipped with ingredient chute and safety guard made of stainless steel + Machine instantly shuts off when the guard is lifted + Integrated dust/splash protection cover + Machine stands on four vibration-absorbing adjustable feet + No floor anchoring required + Hydraulic bowl lift with dual safety switches + Bowl support arms made of stainless steel + Enclosed planetary gearbox made of stainless steel + Optionally compatible with 60-liter accessories + Fast spare parts supply within 1–2 business days STANDARD accessories, included in the price: - 1x 80-liter stainless steel bowl - 1x whisk for 80-liter bowl - 1x flat beater for 80-liter bowl - 1x dough hook for 80-liter bowl SPECIAL accessories, optionally available at extra cost (prices on request): - Additional 80-liter stainless steel bowls - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 80-liter bowls - 60-liter accessory set (1x 60-liter stainless steel bowl + 3 tools for 60-liter bowl) - Bowl trolley for 60-liter bowls Technical specifications: - Motor power: 4.5 kW - RPM at 50 Hz: 133 – 400 (speed levels 1–10) - Circuit protection: 16A CEE plug - Electrical connection: 400V - 3Ph - 50Hz - Dimensions (W x D x H): 720 x 1050 x 1660 mm - Max. height 1910 mm when hood is open - Net weight: 450 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, New machine 24 months warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital control Rsdpehydl Iefx Alaet + 10 speeds with constant power transmission + Includes ingredient chute and stainless steel safety guard + Automatic stop when the guard is lifted + Integrated dust/splash protection cover + Machine stands on four vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift operated by lever + Bowl support arms made of stainless steel + Enclosed planetary gear made of stainless steel + Optionally compatible with 30-liter equipment + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1x 60-liter stainless steel mixing bowl - 1x whisk for 60-liter bowl - 1x flat beater for 60-liter bowl - 1x dough hook for 60-liter bowl SPECIAL accessories, optionally available at extra cost, prices on request: - Additional 60-liter stainless steel mixing bowls - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 60-liter bowl - 30-liter equipment set (1x 30-liter stainless steel bowl + 3 tools for 30-liter bowl) Technical data: - Motor power: 3.0 kW - RPM at 50Hz: 165 - 450 (level 1 - 10) - Electrical connection: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 690 x 940 x 1470 mm (W x D x H) - Max. height: 1710 mm when cover is open - Net weight: 300 kg

Kondisi: seperti baru (mesin pameran), note-this-is-a-second-choice-product-ii-wahl-new-unused-second-c hoice-means-there-may-be-dust-deposits-minor-scratches-or-dirt-th e-oil-drip-tray-is-designed-for-storing-containers-that-are-not-l eak-proof-or-have-been-partially-used-such-as-paint-cans-paint-bu ckets-cleaning-agents-etc-the-oil-drip-tray-can-be-optimally-plac ed-in-a-shelving-unit-scope-of-delivery-includes-01x-oil-drip-tra y-ii-choice-new-manufacturer-ssi-schaefer-type-oaw-4800-material- finish-sendzimir-galvanized-capacity-approx-60-liters-load-capaci ty-200-00-kg-overall-width-approx-1-020-mm-usable-width-approx-97 0-mm-overall-depth-approx-790-mm-usable-depth-approx-784-mm-overa ll-height-approx-125-mm-usable-height-approx-95-mm-material-thick ness-approx-3-00-mm-weight-per-piece-approx-26-960-kg-your-contac ts-at-our-company-mr-andre-evering-mr-mario-kloever-mr-falk-deuts ch-general-information-on-the-item-this-item-is-offered-for-colle ction-only-transport-or-shipping-can-be-arranged-at-additional-co sts-depending-on-the-destination-and-scope-of-delivery-these-can- be-quoted-upon-request Rjdpfx Aljn Atm Doajt

Kondisi: sangat baik (bekas), CTS Model: CSR-60/810/S Air-cooled Temperature and Climate Conditioning Unit CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system manufactured by CTS GmbH, comprising a conditioning unit (type CSR-60/810/S) and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications—for example, automotive, electronics, component, or material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system by CTS GmbH, consisting of: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance/lifetime testing). Technical Data (per nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Rjdpfx Aljya Ev Neajt Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System: Refrigerant: - Pre-cooling stage: R452A (17.0 kg) - Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 | Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (WxDxH): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (WxDxH): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information: The following work is performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change. Errors excepted.) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), CTS Model: C-40/60 CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40 °C to +180 °C Humidity Range: 10% to 98% relative humidity +10 °C to +90 °C in temperature mode +5 °C to +89.5 °C dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal Voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated Current: 13 A Buyer Information for Your Safety! The following steps are performed on the climate chambers we offer prior to sale: Rsdpfxju Hlb Ee Alaot 1. Functional check and replacement of necessary components 2. If required, replacement with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data!) If you have any further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C, Water-Cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well-maintained. Chamber Volume & Internal Dimensions: Test volume: 60 liters Interior basket/test space (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Rjdpexr A R Tsfx Alaet Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min Single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lifting System: Basket/lift system load: 20 kg maximum load Transfer basket protected by safety grilles on all sides Additional Features & Specifications: Noise level: approx. 58 dB(A) in operation Control: touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A External circuit protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg For your safety as a buyer, please note the following information! The following measures are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Recharge with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT³ 7006 S2-M Water-cooled Technical Data: Maximum specimen weight: 20 kg Test volume: 60 liters Test chamber dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via shuttle) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Rsdpfxsx Hglyo Alaet Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm conduit for measurement / test specimen supply SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW, Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important safety information for buyers: The following procedures are carried out on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) For further questions, please feel free to contact us by phone.

Kondisi: diremajakan ulang (bekas), 60 m³ / 60,000 l Firefighting Water Tank according to DIN 14230 Tank Capacity: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel grade S 235 JRG 2 Underground tank for below-ground storage, available as single or double-walled, suitable for walkable and drive-over areas (load class SLW 30) with 1 dome (external diameter 720 mm) with blank cover, sealing, and bolts. Available immediately, both new and used! The tank has been emptied, cleaned, overhauled, and professionally leak-tested by us as a certified specialist company. The tank complies with the requirements of DIN 14230 (Underground firefighting water tank): - Firefighting water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319, version form B, without dip tube - Ventilation flange connection NWN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Exterior protected with bitumen coating - Upon request, we can equip the tank with a full internal coating based on bitumen or epoxy resin (for corrosion protection) - It is also possible to line the tank with an internal plastic liner Cost-effective delivery with our own truck is possible. Just let us know the delivery location and we will promptly provide you with the exact shipping costs. Inspection is possible at any time by prior arrangement. If you require further information, simply call us or send an email to b.barth(at)barth-tank.de Rsdpshh Sruefx Alaot We also accept trade-ins and purchase tanks/containers of any type, just contact us regarding this. We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, New machine with 24-month warranty Stainless steel model Advantages: + Mobile unit, equipped with lockable castors + Fully constructed from stainless steel + Suitable for production and preparation of choux pastry, custard, chocolate, fondant, fruit jam, coatings, fillings, and any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, designed for safe and simple operation + Triple-walled construction for optimum heat insulation + Fitted with side and bottom scrapers + Electronic thermostat for regulating cooking temperature + Equipped with a timer + Manual or automatic operation possible + Digital temperature display + Vessel can be easily tilted for emptying using a handwheel (optionally with drain valve) + Two working speeds + Overheat safety switch + Fast spare parts supply within 1-2 business days OPTIONAL Special accessories, available at an extra charge: - Drain valve for fast, easy emptying: + €860 net - Machine with frequency converter for stepless stirring speed: + €1,275 net (delivery time + 5 to 6 weeks) Technical Data: Redpfsivdubsx Alast - Capacity: 60 litres - Max. temperature: 150°C - Thermal oil volume: 17.5 litres - Heating power: 6 kW - Stirring speed: 46 rpm & 92 rpm (1st / 2nd gear) - Motor power: 0.6 kW / 0.8 kW (1st / 2nd gear) - Electrical supply: 400 V - 3Ph - 50Hz - 32A CEE plug - Dimensions: 960 x 780 x 1635 mm (WxDxH) - Filling height: 1200 mm - Net weight: 150 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, de7e08a0-9806-44cc-a954-68d4c59c9045 Rodpfoqy Hcdex Alaet

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, used sourdough machine Isern Häger 600 RMS, for 1,000 liters, in bakery condition (good condition), machine no. 06910004, 2.3 kW, 400 V, 50 Hz, weight 420 kg Rjdpfx Alewwwdhoajt

Kondisi: baik (bekas), Technische staat: zeer goed Optische staat: zeer goed Neem contact op met Ferdinand Pater voor meer informatie. Rjdpsyy Dxqofx Alaot

Kondisi: sangat baik (bekas), jarak tempuh: 770.076 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 06/2010, jenis bahan bakar: diesel, konfigurasi gandar: 6x2, jarak roda: 5.450 mm, bahan bakar: diesel, warna: lain, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, jumlah tempat duduk: 2, panjang total: 9.220 mm, lebar total: 2.530 mm, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 11.500 kg, beban gandar yang diizinkan (gandar 3): 7.500 kg, Tahun pembuatan: 2010,

Kondisi: baru, Tahun pembuatan: 2026, Kilia Kutter Vacuum 30 6000 Vario Kecepatan putar pisau pencampuran/pemotongan (RPM): 500 hingga 5100, variabel Kecepatan pisau (m/s): 80 Penggerak pisau tanpa tingkat Penggerak mangkuk tanpa tingkat Penutup vakum hidraulis Pemutusan berdasarkan waktu/putaran Pemutusan suhu Pelumasan sentral Kendali jarak jauh Kapasitas mangkuk L/Kg: 30 L / 21 kg Putaran mangkuk RPM: 7 hingga 20, variabel Kontrol sentuh dan manual Penggerak penutup pisau elektrik: opsional Fasilitas memasak/pendinginan: opsional Manajer resep KPV: opsional Rjdpfsyv Uwcjx Alaot Sekring pendahulu oleh pelanggan: 25 A gG/C Daya koneksi terpasang: 15 kW

Kondisi: sangat baik (bekas), Kondisi teknis: sangat baik Kondisi optik: sangat baik Rjdpet Dlq Hefx Alajt Harga: Atas permintaan Hubungi Ferdinand Pater untuk informasi lebih lanjut.

Kondisi: bekas, Weiss Type: WK111-600 Weiss Climate Test Chamber, air-cooled Specifications for Temperature Testing: Temperature range: -5°C to +90°C Temperature fluctuation over time: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (Corresponds to a temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Specifications for Climatic Testing: Temperature range: +10°C to +90°C Humidity range: 10 to 98% r.h. Temperature fluctuation over time: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (Corresponds to a temperature gradient): 1 to 2 K Humidity fluctuation over time: ±1 to ±3% r.h. Test chamber dimensions: width 800 mm x depth 800 mm x height 950 mm Housing dimensions: width 1000 mm x depth 1660 mm x height 1975 mm Ports: 1 port Ø 50 mm installed on the left 1 port Ø 125 mm installed on the right Power supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Chamber volume: 600 liters Rodjygum Dspfx Alaet Weight: 540 kg Important safety information for buyers: The following checks are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Tahun pembuatan: 2016, jam operasional: 9.195 h, Kondisi: sangat baik (bekas), de_DE Redpfet Txttox Alaot

Tahun pembuatan: 2016, jam operasional: 14.242 h, Kondisi: sangat baik (bekas), de Redpfx Ast Txqrolaot

Kondisi: baik (bekas), Weiss Klimaprüfschrank mit Feuchte Hier bieten wir Ihnen eine Vötsch Umweltsimulationskammer mit Feuchtefunktion an. Vötsch 4060-10, luftgekühlt, mit Feuchteregelung Innenmaße Prüfraum: Höhe 950 mm, Breite 800 mm, Tiefe 800 mm Außenmaße: Höhe 2150 mm, Breite 1225 mm, Tiefe 2890 mm Prüfrauminhalt: ca. 600 Liter Betriebsstunden: 3354 h Baujahr: 2007 Durchführungen: R1: NW 125 mm L1: NW 50 mm Daten für Temperaturprüfungen: Temperaturbereich: -40°C bis +180°C Temperaturkonstanz im Zentrum des Nutzraums über die Zeit ± 0,1 bis ± 0,8 K Räumliche Temperaturverteilung ± 0,5 bis ± 2,0 K Temperaturänderungsgeschwindigkeit: Heizen 9,5 K/min Kühlen 12,0 K/min Leistungsaufnahme für Wärmekompensation bei 20°C max. 8000 W bei -20°C max. 3000 W Daten für Klimaprüfungen: Temperaturbereich: +10°C bis +95°C Feuchtebereich: 10 % bis 95 % r.F. Temperaturkonstanz über die Zeit ± 0,1 bis ± 0,5 K Räumliche Temperaturhomogenität ± 0,5 bis ± 1,0 K Feuchtekonstanz über die Zeit 1 bis 3 % r.F. Nennspannung: 3/NPE AC 400V ±10% 50Hz Nennleistung: 16,0 kW Nennstrom: 26,0 A Kältemittel: R-404A Das Schienensystem zum Einschieben ist vorhanden. Zwei Bodenbleche für Prüfraum: eines komplett, eines mit Loch (Durchmesser 300 mm). Gewicht (ca.): 1020 kg Hinweise für Ihre Sicherheit als Käufer: 1. Die Klimakammer funktioniert einwandfrei. 2. Es müssen keine Bauteile ausgetauscht werden. 3. Kältemittel ist gesetzeskonform befüllt. Rsdpfxet E Sfge Alajt Zustand: gebraucht (hervorragend) (Änderungen und Irrtümer in den technischen Daten und Angaben vorbehalten!)