Beli Mesin Hobbing Roda Gigi Horizontal bekas (81.928)

Kondisi: sangat baik (bekas), Diameter roda – maks. 175 mm Lebar roda 350 mm Modul – maks. 3 Modul – min. 0,5 Berat mesin sekitar 0,9 ton Ruang yang dibutuhkan sekitar 1,2 x 0,8 x 1,4 m Ljdpfsznnitex Al Nehi

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 Lhedpfxet Hw D Rs Al Noi TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Lodpfet Hwxbox Al Njhi Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Kondisi: baik (bekas), Modul – maks. 2 Panjang frais 135 mm Total kebutuhan daya 2,2 kW Berat mesin sekitar 1420 kg Kebutuhan ruang sekitar 2,00 x 1,60 x 1,43 m --> Data teknis: diameter frais terbesar: Ø 150 mm --> Panjang frais terbesar: 135 mm Lhjdpfx Aszkvuvol Nji --> Modul terbesar: 2 --> Lubang spindel: Ø 24 mm --> Dudukan spindel: MK-4 --> Kecepatan putar frais: 140 - 1120 RPM --> Umpan otomatis Peralatan dan aksesori: Sistem pendingin, frais, roda pengganti, buku petunjuk pengoperasian

Kondisi: siap digunakan (bekas), Zahnrad-Abwälzmaschine Typ FD320, FD500 und FD800 Cugir Lhedpfx Ascrd Nmjl Nsi Maximaler Modul: 6 bis 10 mm Maximaler Bearbeitungsdurchmesser: 320 bis 800 mm

Kondisi: baik (bekas), Mesin frais roda gigi, mesin frais, mesin frais perkakas, mesin frais vertikal, mesin frais rol, mesin frais roda gigi rol, mesin frais roda gigi, mesin frais rol berkinerja tinggi -Produsen: Liebherr, mesin frais rol berkinerja tinggi Tipe SS 5-K/500 -Area kerja: Ø maks. 500 mm -Diameter frais maks.: 186 mm -Aksesori: termasuk aksesori lengkap, lihat foto -Tidak termasuk: templat untuk pemotongan miring -Dimensi mesin: 2300/1460/T1870 mm -Dimensi aksesori: palet 1420/1300/T300 / 1200/800/300 mm Lhedov Dtmmepfx Al Nsi -Berat: 5300 kg ditambah 535 kg aksesori

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centre distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Lhodpfx Alsvz Ec Is Noi Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Dra8M7 - Documentation

Kondisi: sangat baik (bekas), trans_001 Lhodpfx Aley Umize Nsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Diameter meja: 630 mm Lhodpfx Aozbhytsl Nji Diameter kerja maks.: 800 mm Modul maks.: 10 Dilengkapi dengan roda gigi ganti dan mandrel

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Diameter maks 750 mm, perjalanan sumbu Z 900 mm, perjalanan radial X 380 mm, meja 630 mm, CNC Siemens 802D pada sumbu Z dan X. Berat sekitar 14.000 kg. Ledpfx Aszbt Iijl Nohi

Kondisi: baik (bekas), Diameter roda - maks. 145 mm Lebar roda 110 mm Modul - maks. 2 Modul - min. 0,3 Kecepatan putar 112 - 1000 rpm Jumlah gigi - min. 6 Panjang penjepitan maks. 150 mm Kebutuhan daya total 3,5 kW Berat mesin kira-kira 1,3 t Ledpfxsy Ivdhs Al Nehi Kebutuhan ruang kira-kira 1,3 x 0,8 x 1,4 m

Kondisi: bekas, Produsen: WMW Tipe: ZFW-Z 160x3 Mesin hobbing roda gigi Diameter benda kerja maks.: sekitar 160 mm Modul maks.: 3 Pengoperasian manual dan semi-otomatis Lhjdpfx Alsyy N Hyj Noi Konstruksi: Mesin kokoh dan presisi, dirancang untuk akurasi tinggi dalam produksi roda gigi Hanya untuk waktu terbatas 10.000 Euro untuk 1x mesin hobbing roda gigi WMW 2x mesin rolling ulir WMW UPW25!!!!! Hanya untuk waktu terbatas 2x WMW UPW25 1x mesin hobbing roda gigi WMW Semua hanya 10.000 Euro !!!!!

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears Lhjdpfx Alovzhf Se Nji - Milling arbors - Clamping devices - Documentation

Tahun pembuatan: 1940, Kondisi: bekas, Automatic universal gear hobbing machine for the production of spur gears and worm gears Maximum hobbing diameter: 120 mm Minimum hobbing diameter: 5 mm Smallest module: 0.30 Ledpokw T Rmefx Al Nehi Largest module: 2 mm Maximum hobbing length: 100 mm Complete with all accessories

Kondisi: baik (bekas), Tahun pembuatan: 1991, Berat mesin sekitar 6 ton. Konsep mesin dasar memiliki karakteristik sebagai berikut: - Posisi horizontal spindel benda kerja; posisi vertikal spindel frais atau kepala frais. - Pemasangan benda kerja dilakukan di antara rumah spindel benda kerja (kiri) dan kepala penopang (kanan). - Peluncur radial dipasang di atas alas (sumbu X). - Peluncur aksial bergerak pada peluncur radial (sumbu Z). - Kepala frais geser dilengkapi dengan pengaturan sudut otomatis (sumbu A); peluncur geser (sumbu Y) bergerak secara tangensial terhadap diameter benda kerja. - Dikendalikan oleh CNC. - Sistem kontrol IBH. - Perangkat pemuatan. - Banyak sekali aksesori. Data teknis: - Modul frais terbesar dengan pahat rol sesuai DIN 8002: 4,5 mm - Modul frais terbesar untuk frais berkecepatan tinggi: 3,0 mm - Jumlah gigi: 2 - 999 - Diameter benda kerja maksimum saat pemuatan manual: 200 mm - Diameter benda kerja maksimum saat pemuatan otomatis: 150 mm - Panjang benda kerja maksimum: 400 mm - Diameter/diameter terkecil pahat frais: 102/40 mm - Panjang pahat frais maksimum: 230 mm - Diameter/diameter terkecil poros frais (standar): 32/16 mm - Langkah peluncur aksial = panjang frais maksimum sumbu Z: 300 mm - Langkah peluncur radial sumbu X: 140 mm - Langkah pergeseran frais (langkah geser) sumbu Y: 100 mm - Langkah kepala penopang sumbu W: 420 mm - Sudut putar kepala frais geser (kiri/kanan) sumbu A: 50°/60° Koordinat frais: Lhedpfx Aloub Amfo Noi - Sumbu Z: 100 - 400 mm - Sumbu X: 130 - 150 mm - Sumbu Y (ujung kepala spindel frais): 50 - 230 mm - Sumbu W (ujung spindel kepala penopang): 165 - 585 mm - Rentang kecepatan putar pahat frais standar sumbu B: 0 - 1500 RPM - Kecepatan putar benda kerja sumbu C: 0 - 350 RPM Kecepatan umpan: - Sumbu X: 3500 mm/menit - Sumbu Z: 3500 mm/menit - Sumbu Y: 4000 mm/menit - Sumbu W: 5500 mm/menit - Sumbu V (pemuat portal): 80000 mm/menit

Kondisi: bekas, Tahun pembuatan: 2001, 1 Lhsdpfxexrwpko Al Nei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1443, diameter meja: 180 mm, diameter roda gigi: 200 mm, panjang spindle milling: 230 mm, kecepatan spindel (maks.): 750 rpm, sudut putar sumbu A (min.): -45 °, sudut putar sumbu A (maks.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table rotational speed: 100 rpm Centre distance: 15 - 400 mm Machine Base Max. axial travel: 600 mm Milling Head Swivel Device Milling head swivel angle: ± 45 degrees Milling Head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter-holder Max. counter-holder travel: 540 mm Max. rapid traverse of counter-holder: 15,000 mm/min Max. counter-holder arm force: 13 kN MACHINE DETAILS Total weight approx.: 15,000 kg Lhjdpfxjw T Ry To Al Nei Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump delivery rate: 24 l/min Hydraulic tank capacity approx.: 7 l Max. average noise level: 82 dB(A)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 28 958, jarak pergerakan sumbu X: 100 mm, jarak lintasan sumbu Y: 160 mm, DETAIL TEKNIS Diameter lingkaran kepala yang diizinkan maksimum: 80 mm Panjang pean gigi - maks.: 170 mm Panjang total: 240 mm Diameter penjepit: 32 mm Perjalanan sleding radial (sumbu X): 100 mm Perjalanan sleding tangensial (sumbu Y): 160 mm Gerak aksial sumbu Z: 300 mm/menit Lubang spindel benda kerja: 45 mm DETAIL MESIN Berat mesin sekitar: 7.000 kg Kebutuhan ruang sekitar: 9.130 x 3.895 x 3.450 mm Tegangan: 400 V Frekuensi: 50 Hz Lodpfjw T Rz Dox Al Njhi Nilai sambungan: 45 kVA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1130, diameter meja: 250 mm, diameter roda: 280 mm, kecepatan spindel (maks.): 1.500 rpm, DETAIL TEKNIS Diameter roda - maks.: 280 mm Modul - maks.: 7 Rentang kecepatan putar meja: 100 rpm Lsdpfow T R Ahox Al Njhi Diameter meja: 250 mm Jarak antar sumbu: 15 - 285 mm Jalur aksial: maks. 350 mm Kepala Frais Daya penggerak: 16 kW Jumlah gigi - min.: 4 Kecepatan putar cutter: 1.500 rpm Diameter cutter terbesar: 160 mm Panjang cutter maks.: 230 mm Perjalanan tangensial: 200 mm Kecepatan tangensial: 3.000 mm/menit Sudut putar: ± 45° DETAIL MESIN Berat mesin kira-kira: 13.000 kg Tegangan suplai: 400 V Frekuensi jaringan: 50 Hz Daya terpasang: 35 kVA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, diameter roda gigi: 180 mm, jarak gerak sumbu Z: 300 mm, panjang poros: 640 mm, RINCIAN TEKNIS Diameter roda - maks.: 180 mm Modul - maks.: 4 Gerak sumbu axial (sumbu Z): 300 mm Panjang poros - maks.: 490-640 mm Perjalanan Y: 33 - 193 mm Ljdsw T R Abopfx Al Njhi RINCIAN MESIN Kebutuhan daya total: 14 kW Berat mesin: 8 t Penghitung benda kerja: 886.067 buah

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1719, diameter roda: 280 mm, RINCIAN TEKNIS Diameter roda maks.: 280 mm Modul maks.: 7 Ledpfx Alew T R Auj Nshi RINCIAN MESIN Berat mesin: 13 t Tegangan operasi: 400 V Tegangan kontrol: 24 V DC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, GP300 CNC Mesin Hobbing Gigi, PEMROSESAN BASAH & KERING sesuai pilihan. Kedua opsi tersedia. Lhodpfxoxqn Tqs Al Nei Siemens 840D Solution Line, sistem 5-sumbu, untuk benda kerja poros dan cakram. Maks. Ø300 mm, modul maks. 6, rentang putar ±45°, perjalanan aksial 440 mm, daya hobbing 15 kW, HSK-B80, meja Ø300 mm, penggerak langsung, kecepatan 90–900 rpm. Presisi tinggi, teknologi penggerak digital (Sinamics S120), posisi kepala otomatis 0,001°, pemandu linear, penarikan pengaman, kompensasi suhu, penutup penuh.

Kondisi: sangat baik (bekas), mikron_a33_description_en Lhjdex A D Izjpfx Al Nji

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter meja: 430 mm, Harga untuk kedua mesin – hanya dijual sebagai satu paket. Lhodoxfub Dopfx Al Nei Merek: STAEHELY SH 500 Aksesori: roda gigi pengganti, arbor, dan satu mesin dengan kepala frais tangensial (lihat foto)!!!!! Diameter meja = 430 mm Diameter roda gigi maks. = 500 mm Lebar roda gigi = 240 mm Modul = 6

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Profile Thread and Gear Hobbing Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing Lsdpow Hquxjfx Al Nehi • Longitudinal milling Maximum workpiece diameter over saddle: 250mm Maximum workpiece diameter over bed slideway: 500mm Spindle bore: 102mm Tailstock quill adjustment: 100mm Main motor: 4.0 kW Cross axis (x) feed motor: 4.3 kW Longitudinal axis (z) feed motor: 3.8 kW Electrical Equipment Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic controller for predefined machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard Accessories: • Standard thread milling attachment ApG • Maximum milling diameter: 150 mm • Milling spindle internal taper: Morse 3 • Maximum module for gear hobbing: Module 3 • Smallest to largest tooth count for gear hobbing: 4–50 Options: • Gear hobbing attachment ApFW For hobbing axis-parallel and helical profiles up to module 7 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4 • Heavy-duty thread milling attachment ApGS For hobbing axis-parallel and helical profiles up to module 5 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4